Innomdle Lab HB-N50 Active Noise Cancelling Headphones User Manual x

Download:
Mirror Download [FCC.gov]
Document ID	3977413
Application ID	dWadqeK/ILAiN75rKJabUw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.16kB (114549 bits)
Date Submitted	2018-08-24 00:00:00
Date Available	2018-08-24 00:00:00
Creation Date	2018-08-09 11:43:09
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2018-08-23 09:22:50
Document Title	Microsoft Word - User Manual.docx
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User Manual
HB-N50
Active Noise Cancelling H eadphones
Thank you for purchasing the Linner Active Noise-Cancelling Earbuds. Please read this user manual carefully and keep it
for future reference. If you need any assistance, please contact our support team with your product model number.
Copyright© Shenzhen Shengyuan Tech Co., Ltd
Bluetooth® is a trademark of Bluetooth SIG, Inc. registered globally.
Package Contents
A Bluetooth headset
Three Pairs of Ear Buds (S/M/L)
Three Pairs of Ear Hooks (S/M/L)
Hop-pocket
User manual
Components
earphone
VOL-
Ear bud
Active noise
cancellation button
Ear hook
ON/OFF button
Headset body
Charger jack
Neck strap
Bluetooth indicator
VOL+
Multifunction button
Getting Started
Please fully charge the battery before using headset for the first time.
Open the charging socket cover, connect the headset to the USB charging adapter or computer through the USB data cable.
Multifunction button
Bluetooth
Multifunction button
headset state
Single click
Double click
Hold down (2 seconds)
Hold
down
seconds)
Connectionless
Connect to the last Connect to the last Connect to the last mobile Enter pairing
mobile phone
mobile phone
phone
(5
Connect to phone
Play /pause
last number redial
Mobile voice assistant
Enter pairing
Making call
Answer/End a call
transfer a call answer to cell /
phone
power on or off
Turn on/off the headset by Pressing and holding the ON/OFF button for several seconds.
Connecting devices via Bluetooth
1.The device enter pairing mode with red and green light flashing alternately when you hold down the multifunction button
for several seconds.
2.keep the Bluetooth available,Click on the Linner in the bluetooth list ,enter the PIN code "0000" ，then the headset can be
connected with the phone.
Bluetooth indicator state
Headset state
Indicator state
Power on
green
Power off
red
Standby
Green flashing
Enter pairing
Red and green flashing alternately
charging
red
Fully charged
green
Active noise control and Monitor functions
Press the active noise control button, cycling noise control mode and monitoring mode.
Long Press the ANC button, headset will enter the normal mode.
Next /previous song
When listening music, long press "VOL+" button to enter the next song, press the "VOL-" button to enter the previous one.
Connect multiple devices
The headset can connect up to two Bluetooth enabled devices at most.
In pairing state, the headset connect to the second mobile phone after connecting with first mobile phone. So that the
headset can be connected to two mobile phones at same time.
Product Care & Use
1.Please keep away from liquids and extreme heat.
2. Do not use headphones at high volume for extended periods, as this may cause permanent hearing damage or loss.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Warranty &Customer Support.
For after-sales service and warranty issue，inform us of the order number and product number.
More information about Linner, please feel free to contact us at the address below
Email
:support@linner.com.cn
English Web : www.Linner.io
Chinese Web :www.linner.com.cn
Twitter
:@linnerofficial
Facebook
:facebook.com/linnerofficial

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2018:08:23 09:22:50+08:00
Create Date                     : 2018:08:09 11:43:09+08:00
Metadata Date                   : 2018:08:23 09:22:50+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.docx
Creator                         : Administrator
Document ID                     : uuid:f020eef3-9b24-4823-9165-ac74ccd70358
Instance ID                     : uuid:9ffa3fc1-7fc4-4ccb-853e-e845f61225f6
Page Count                      : 8
Author                          : Administrator

EXIF Metadata provided by EXIF.tools