Innostream I-2100 E-GSM1900 GPRS Terminal Equipment User Manual UserMan
Innostream Inc. E-GSM1900 GPRS Terminal Equipment UserMan
UserManual.wiki
>
Innostream
>
I 2100 User Manual
UserMan
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 5 of 5 Appears when a missed call has occurred. Appears when a new text message has been received Appears when you have messages waiting in voice mail Appears when a new PUSH message has been received Indicates that your SIM card is not inserted. Indicates that the battery level of your phone is low. Indicates that the battery of your phone is being charged. Indicates that the battery of your phone is fully charged while your phone is not powered up. 1.2 Keys Description Description Performs the functions indicated by the text in the bottom line of the display screen above those keys. Makes or answers a call. In the idle mode, launches the recent calls list.(Dialled, Missed and Received ) In the menu, selects a menu function or stores information that you have entered (such as a name) in the phone or SIM memory. Ends a call. Also switches the phone on or off when pressed and held. In the menu, returns to the idle mode or cancels your input. Enters numbers, letters and some special characters. In the idle mode, enters special dial characters. Enters ‘ +’ (International Indicator) or ‘ P’ (Pause) when pressed and held While you are playing the game, these keys are used for adjusting the game melody volume. (on the left side of phone) If a cell broadcasted message is displayed on the idle screen, scrolls it up/down. During a call, adjust the earpiece volume. During a game, adjust the game melody volume. [VOL-UP] In the idle mode, displays the today’ s date and day for short time. It switches between the silent mode and previous profile you have set on Activate Profile menu when pressed and held in the idle mode. [VOL-DOWN] In the idle mode, launches Voice Memo menu if you press and hold while the folder is opened.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-5.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 6 of 6 In the editing mode, moves the cursor. In the menu, moves the menu cursor. In the idle mode, each key has following functionality. [NAVI-LEFT] : launches the Games menu [NAVI-RIGHT] : launches the Biorhythm menu to check today’ s your biorhythm. During a call, [NAVI-LEFT] and [NAVI-RIGHT] change the call focus on the multiple calls state. [NAVI-UP] : launches the Calendar menu [NAVI-DOWN] : launches the Inbox SMS message list. During a call, [NAVI-UP] and [NAVI-DOWN] adjust the earpiece volume. [NAVI-CENTRE] In the editing mode, launches the editing mode selection menu. In the menu, selects the menu on which menu cursor is. In the idle mode, accesses the WAP site. 1.3 Silent Mode You can switch the sound/alert mode of your phone by just pressing and holding the [VOLUME-UP]on the idle screen. icon on the top of the main display screen or icon on the top of the sub display screen indicates that your phone is under the silent mode status. If your phone is in the silent mode, all audible key tones are muted and all audible alerts are changed to vibrator alert. ! Note : If your phone is on the silent mode, the entry of some menu related to sound/alert is prohibited. 1.4 Using the Navigation Keys To use the navigation keys appropriately. 1. [NAVI-LEFT] : Push the left side of the navigation key bar to left direction. 2. [NAVI-RIGHT] : Push the right side of the navigation key bar to right direction. 3. [NAVI-UP] : Push the up side of the navigation key bar to up direction. 4. [NAVI-DOWN] : Push the down side of the navigation key bar to down direction. 5. [NAVI-CENTRE] : Push the navigation key bar down. 1.5 Using the Earphone If you insert the earphone to the jack on the topside of your phone, you can use it in the same way as your phone’ s earpiece and microphone. You can answer or end a call by pressing the hook button on the earphone. When new waiting call is come while you are in a call, you can answer the waiting call by pressing the hook button on the earphone. (The first call will be held automatically) You can make the last number dialled call in the idle screen by pressing the hook button on the earphone. The last number dialled is launched by pressing the hook button, and then the call will be made by pressing the hook button again.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-6.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 7 of 7 !Note : If the earphone is inserted, your phone’ s standby time may be reduced. Therefore, please eject the earphone when not used. 1.6 Display Screens in the Idle Mode < Main Display Screen > Icon Area: 7 icons such as Signal Level, SMS, Voicemail, Vibrator, Alarm, Roaming, and Battery Level are displayed indicating the phone status. If the silent mode is enabled, icon will appear in the Vibrator icon’ s place. Network Status and Icon Area: Network name registered is displayed. If there is not any GSM/DCS network near the location you are, No Service is displayed. If you are in the coverage of a GSM network but you are not allowed to be registered to the network, Emergency Only is displayed. icon appears on the right of the area when PUSH message has arrived. ! Note : If you press [VOLUME-UP], current date and day are is displayed on the area for short time. The time is always displayed on the bottom right of the User Selectable Area. User Selectable Area: A photo or image is displayed according to the setting of Picture menu. Please see Section 9 for details. If you set to get the broadcast message from the network, you can see it on the idle screen. For details of how to activate and deactivate it, please see Broadcast menu in Section 9. In this case, the User Selectable Area updates the received broadcast messages. If you want to go back to default screen, press [END]. ! Note: The broadcast message service may not be available on all networks. Function Key Area: The functions assigned to right soft key and left soft key are displayed. < Sub Display Screen > Icon Area: 4 soft icons such as Signal Level, Vibrator, Alarm, and Battery Level are displayed indicating the phone status. Network Status or Event Area:](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-7.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 8 of 8 The adequate network status image is displayed according to the network status. Analog Clock, Image, Date or User Text is displayed according to the setting of Sub Screen menu only while your phone is registered to a GSM/DCS network. If an event is occurred, an adequate event image is displayed. For more details, please see Section 1.1. ! Note : If you press [VOLUME-UP] on the idle screen, current date and day is displayed on the area for short time. Time Area: Current time is displayed in the Area. 2. Getting Started NOTE : Please never detach the battery from your mobile while your phone is alive. To turn off your phone, please press and hold down only Power key until you see the power-off animation. Please use only approved batteries and chargers. 2.1 How to attach the battery 1. Align the bottom of the battery down into the holes in the bottom of the phone. 2. Then sit the battery on the back of the aligned until it clicks into place. 2.2 How to remove the battery Turn off your phone first. 1. Press up the battery release latch 2. Slightly lift the upper place of battery out of back of phone. 2.3 How to charge the battery The first charging must be for at least 4 hours in order to achieve optimum performance when you buy this phone. Normally your phone completes to charge the battery in one hour. You can make calls whilst charging your phone. Your phone turns off by itself if the battery is not able to supply enough power. !Note : Do not charge your phone without the battery in place. < Charging with the Travel Adaptor> 1. Plug your Travel Adaptor into the charger socket at the bottom of your phone. The charging icon will be indicated on the Sub-LCD screen.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-8.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 10 of 10 1. Open the folder 2. a) To switch your phone on, press and hold down [END] until you hear the power-on melody. Some SIM card may be protected with PIN. If Enter PIN is prompted, enter your PIN and then press [Ok soft key]. For more details, please see Security Codes in section 3. ! Note: If your PIN is entered invalidly three times in succession, your SIM card is blocked . In order to unblock it, see Security Codes in section 3. If Enter Lock Code is prompted, enter your Lock Code and then press [Ok soft key]. The Lock Code is factory set to 0 0 0 0. For more details, please see Security Codes in section 3. After the phone is turned on, the phone searches for a network. b) To switch your phone off, press and hold down [END] until you see the power-off animation. 3. Security Codes The security codes are used to protect your phone and SIM card from other person’ s use and control access to security and other options within the menus. You can change the security codes (except SIM Lock Code, PUK Code, PUK2 Code). For more details, please see the Security Setting menu in section 9. 3.1 PIN PIN is Personal Identification Number, used to safeguard your SIM card. PIN code is composed of at least 4 to 8 digits, and usually provided with your SIM card. If the PIN code is entered incorrectly more than three times in succession, PIN will be blocked and your SIM card will automatically lock-up and the Enter PUK screen will be prompted. Once you SIM card is blocked, you must enter the unblock code (PUK) to use your phone again. 3.2 PUK PUK is Personal Unblocking Key, used to unblock the blocked SIM card due to incorrectly entered PIN. PUK code is composed of 8 digits, and usually provided with your SIM card. If the PUK code is entered incorrectly ten times in succession, PUK will be blocked and your SIM card will be automatically lock-up and the SIM Blocked message will be displayed. Once you see the message then you need to contact your network service provider for a new SIM card.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-10.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 11 of 11 3.3 PIN2 PIN2 is Personal Identification Number 2, used to access specific function of your SIM card, for example PIN2 code is used to set a Maximum Cost, Price & Unit or a Fixed Dialling Number. PIN2 code is composed of at least 4 to 8 digits, is only available when your SIM card supports such functions. If the PIN2 code is entered incorrectly three times in succession, PIN2 will be blocked and the Enter PUK2 screen will be prompted. Therefore those functions cant not be used until the unblock code (PUK2) is entered. 3.4 PUK2 PUK2 is Personal Unblocking Key 2, used to unblock the blocked PIN2 due to incorrectly entered PIN2. PUK2 code is composed of 8 digits and it is only used when those functions mentioned above are available. If the PUK2 code is entered incorrectly ten times in succession, the PUK2 will be blocked. Therefore those functions cant not be used until the unblock code(PUK2) is entered. 3.5 SIM Lock Code SIM Lock Code is used to safeguard your phone being used by another SIM card. The SIM Lock Code is composed of 4 digits. The code is a security code entered when you enable the SIM Lock menu. 3.6 Lock Code Lock Code is used to prevent your phone from being used by another person. The code is composed of 4 digits. The code is provided with your phone and is preset from factory to default setting of ‘ 0 0 0 0’ 3.7 Password Password is used to access call barring service and the code is the network password of four digits code. In order to get the Password, you should subscribe call barring service on your network service provider and then request for the Password. 4. Making and Receiving a Call 4.1 Making a call 1. To make a call on your phone, enter the area code and the phone number in the idle screen. In case you enter a number incorrectly, press the [Clear soft key] once to delete](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-11.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 12 of 12 the last digit that you have entered. To remove all the digits, press and hold the [Clear soft key] down until they are deleted, or press [END]. 2. Press the [SEND]. If the number is identified from the phonebook, the name is displayed. You can hear the Connect Tone when the call is answered from the called person, if you set it On. For more details, please see User Preferences menu in Section 9. If you want to end the call while making a call, press [End soft key] or [END], or close the folder. The screen will display a brief message and return to the idle. ! Note: The brief message at the call ending may remain long time if the network is busy. If the earphone is inserted, or if the call is data call, the folder closing does not make the call end. Quick dialling from Phonebook list 1. Press [Phonebook soft key] in the idle screen. 2. Search the group with [NAVI-LEFT] or [NAVI-RIGHT] to find the group that person you want to call belongs to. 3. Locate the cursor with [NAVI-UP] or [NAVI-DOWN] to the name or number you want to call. 4. Press [SEND]. Quick dialling from Speed List Press and hold a numeric key ([0]~[9]) that represents the entry number in the Speed List. Then the number assigned on the key will be automatically dialed. Please see section 6.5 for more details. Quick dialling from recent calls list 1. Press [SEND] for the recent calls in the idle screen. 2. Search the type of the recent calls with [NAVI-LEFT] or [NAVI-RIGHT]. 3. Locate the cursor with [NAVI-UP] or [NAVI-DOWN] to the name or number you want to call. 4. Press [SEND]. 4.2 Answering a call 1. When there is an incoming call, the phone icon on the sub display screen will be displayed, and the melody will sound or the vibrator will work according to the setting. If the caller is identified, the caller phone number or name(if stored in the Phonebook) is displayed and small group icon on the Sub-LCD screen is displayed. The following small fixed icons are available.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-12.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 13 of 13 : indicates No Group. : indicates Family group. : indicates Friends group. : indicates Colleague group. : indicates Business group. : indicates VIP group. : indicates Group1 (User defined group 1). : indicates Group2 (User defined group 2). : indicates Group3 (User defined group 3). If the caller is not identified, No Number or Withheld (if the network suppresses the number display) is displayed. 2. Press [Answer soft key] or [SEND] or open the folder to answer the incoming call. If Any Key Answer menu option is set to On and the folder has been opened, you can press any key to answer the call except for the [End soft key] or [END]. ! Note: If the earphone is inserted, or if the call is data call, the folder opening does not make the call answer. If Folder Answer menu option is set to On, the folder opening does not make the call answer. 3. If you want to reject the incoming call when the folder has been closed, press [VOLUME-UP] or [VOLUME-DOWN]. Press [End soft key] or [END], or close the folder if the folder has been opened. The call number is saved in the missed calls list. ! Note: If the earphone is inserted, or if the call is data call, the folder closing does not make the call reject. If the folder is closed, [VOLUME-UP] or [VOLUME-DOWN] is used for rejecting the incoming call regardless of the Any Key Answer menu. 4.3 Making the emergency call It is possible to call the emergency services if there is a GSM/DCS network within reach. You can dial the emergency number even if the handset is locked, or there is no SIM card in your phone, or your phone cannot be register with your home network. 1. Enter 112 to call the emergency services,. 2. Press [SEND]. ! Note: In the situation such as power-on that Enter Lock Code or Enter PIN is prompted, press simply the [SOS soft key] to call the emergency services. Some network may not allow the emergency call (112) and may request to insert SIM](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-13.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 14 of 14 card. 4.4 Making an international call 1. Press and hold down the [* ] until ‘+’ sign appears to dial an overseas number. The ‘+’ tells the network that the call is international. 2. Enter the country code, the area code (without the leading zero) and the phone number. 3. Press [SEND]. ! Note: Some network may not allow the international call with ‘+’. 4.5 Entering a “Pause” Character in a Dial String A pause character may be entered into a dial string by pressing and holding down [#] until a ‘P’ sign appears. 4.6 Notification of Missed Call If you are unable to answer an incoming call for a reason or if you reject the call, the Missed Call notification message is displayed. You can immediately obtain a list of incoming missed calls (calls not answered) from the idle screen by pressing the [View soft key]. 5. In-Call Options Your phone provides a number of call control functions that you can use during a call. To access these call control functions, press the [Option soft key] or right function soft key during a call. The following illustrations show the example of the display according to the call state. icon in the title area of the screen indicates that you are currently on a call. icon in the title area of the screen indicates that you are in the conference call state. (For example, 2 active calls or 2 held calls) The boxed digits in middle place of the title area of the screen indicate the number of the focused call in the multiple calls state. You can focus to next or previous call by pressing [NAVI-RIGHT] or [NAVI-LEFT]. In the main area of the screen, you can see the number or name (if stored in the phonebook) and the call state of the focused call. Depending on your subscription, you may see the remaining cost in the bottom area of the screen. The time counter in the bottom area of the screen starts when the call starts and indicates how long you have been on the call.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-14.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 15 of 15 ! Note: All of the call control options are not always displayed through all calls, necessary options only will be displayed according to the call state. 5.1 Putting a call on hold/unhold You can put the current call on hold when the call is active state if this service is supported on the network. 1. Press [Hold soft key], or select the Hold option in the Option menu if muted. 2. To make the held call reactivate, press [Unhold soft key], or select the Unhold option in the Option menu if muted. 5.2 Making a second call You can make a second call while you are in a call. 1. Enter the second phone number or fetch it up via Phonebook option. 2. Press [SEND]. The first call is automatically put on hold if the second call is made. < Connecting the first participant with another participant> If you press [Transfer soft key] while the second call is being made, the function allows you to make two participants connect, and then allows you to leave the conversation by itself. Thereafter, two participants are connected to each other. 5.3 Swapping between active calls and held calls You can swap calls while there are active calls and held calls on conversation. Press [Swap soft key], or select the Swap option in the Option menu if muted. The current active calls are placed on hold and the held calls are reactivated. 5.4 Answering a second incoming call You will be notified of an incoming call while you are in a call. Call waiting tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting, is only available if the network supports it and if you have set the Call Waiting menu to Activate. For details of how to activate and deactivate it, please see Call Waiting menu in Section 9. You can answer the second incoming call by pressing [Answer soft key] or [SEND]. The first active call is automatically put on hold, and then the incoming call is active. If the incoming call is comeing while you already have active calls and held calls, the following options are available by pressing [Option soft key] or [SEND]. • End Active Call : makes active calls end and answer the incoming call. • End Held Call : makes held calls end and answer the incoming call.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-15.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 16 of 16 You can reject the second incoming call during a call without answering it by pressing [Reject soft key] or [END]. 5.5 Adjusting the earpiece volume During a call, you can adjust the earpiece volume. To increase the volume, press [VOLUME-UP] or [NAVI-UP]. To decrease the volume, press [VOLUME-DOWN] or [NAVI-DOWN]. 5.6 Muting the microphone You can mute the microphone during a call by selecting the Mute option so that the other party cannot hear you. You can unmute by pressing the [Unmute soft key], and then the other party can hear you again. 5.7 Sending DTMF You can turn off the DTMF tone by selecting the DTMF Off option so that the tone is not transmitted to the remote end during a call. You can turn on the DTMF tone by selecting the DTMF On option. The option is automatically reset to the DTMF On when a call is started. ! Note: To communicate with answering machine, you must use with the DTMF On state. 5.8 Storing a number on the scratchpad You can store a number you entered during a call. 1. Enter a number during a call. 2. Press [Save soft key] to store it to the Phonebook. If the number entered remains not deleted without saving, the number will be displayed on the screen after ending the call. 5.9 Using the SMS function You can read or create SMS messages during a call by selecting the Messages option. For details of how to use it, please see Short Message menu in Section 9. 5.10 Using the loudspeaker You can turn on the loudspeaker by selecting the Loudspeaker On option so that the speech from the remote end is heard in the loudspeaker. The option is automatically reset to the Loudspeaker Off when a call is started. 5.11 Making a conference call](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-16.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 17 of 17 The conference call service provides you with the ability to have a simultaneous communication with up to six persons if this service is supported on the network. ! Note: The Conference Call Service may not be available on all networks. Setting up a Conference Call 1. Make a first call in a normal way. 2. Make second call while you’ re already in a call, then the first participant is automatically put on hold. 3. To join the first participant to the conference call, press [Option soft key] and select the Join All option. icon in the title area of the screen will be displayed. All the conference call participants can now hear each other. 4. To add a new participant to the conference call, repeat step 2 and step 3 as required. You can add incoming callers into conference call by answering the call and pressing [Option soft key], followed by the Join All option. Available Options Please proceed as following sequence to use appropriate option on conference call state. 1. At first, focus on the participant who you want by scrolling through the participants with using [NAVI-LEFT] or [NAVI-RIGHT]. 2. Press [Option soft key]. The following options relevant to conference call are available. Hold All : puts the conference call (all active calls) on hold. Private : makes a private call with the focused participant (whose details is currently displayed on-screen) of the conference call, then puts the other participants on hold automatically. Join All : joins all held calls to the conference call. Transfer : allows you to make two participants connect, then drop your call from the conversation. Two participants are connected to each other. It can be available when one participant is on hold and the other participant is active, or when one participant is on hold and you are making the other call. End Active Call : makes all active calls end and keep the held call. ! Note: [END] is used for dropping the focused call. If you close the folder, the conference call is ended. 6. Phonebook ! Note: If you change with another SIM card, you may lose the information of phonebook data in the previous SIM card. If you do so, the type of the number, text memo and group type may be lost. Only the name and telephone number will remain in previous SIM card.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-17.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 18 of 18 You can store the phone numbers and their corresponding names in the memory of your SIM card. In addition, you can store up to 500 numbers and names into your phone memory. The SIM card memory and phone memory is physically separated but they are searched as a single entity. You can protect your phonebook information against other persons. For more details, please see Security Setting menu in Section 9. The following illustration shows an example of the display of phonebook list. The small icon on the far left side of the each record indicates the group type. The following small group icons are available. : indicates No Group. : indicates Family group. : indicates Friends group. : indicates Colleague group. : indicates Business group. : indicates VIP group. : indicates Group1 (User defined group 1). : indicates Group2 (User defined group 2). : indicates Group3 (User defined group 3). The scroll-bar on the right side of the screen indicates current position of the record on which menu cursor is located. The small icon on the far left side of the each record indicates the record group type. You can move to another group by pressing [NAVI-LEFT] or [NAVI-RIGHT] key. 6.1 Storing a phone number with a name 1. Enter the number at the idle screen and press [Save soft key]. 2. Enter the name of the person or service. If you want to know more about input mode please see section 7. Press [Ok soft key] when the name input completed. 3. You can see the following screen. With pressing [NAVI-UP] or [NAVI-DOWN], you can move the editing cursor to the item that you wish to edit or add. Press the [Edit soft key], and you can edit or add the item. For each name, you can set the group of the name with adequate group icon explained before. You can save up to three(3) telephone numbers and one text memo for each name. For each number, you can set the type of the number with following icons. : Mobile : Home : Office](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-18.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 19 of 19 : Fax : Pager After editing, press [Save soft key] to save the record. The record will be saved into SIM memory or Phone Memory according to the setting of Place To Save in the Settings option. 6.2 Quick searching for a number in the phonebook 1. Press the [Phonebook soft key] in the idle screen. The names stored in the phonebook will be listed in alphabetical order. 2. Press the first letter of the name that you want to search for. To choose a letter on a keypad, the key is pressed the appropriate number of times, rapidly in succession, once for the first letter, twice for the second letter etc. ! Note: If you found the name, you can dial the number by pressing [SEND]. 6.3 Storing a number of the recent calls to the phonebook 1. Press [SEND] in the idle screen. Recent Dialled calls list will be displayed. With pressing [NAVI-LEFT] or [NAVI-RIGHT], you can move the screen cursor to another call record type screen. With pressing [NAVI-UP] or [NAVI-DOWN], you can move the list cursor to the recent number. 2. Press [View soft key] on the name that you wish to store. 3. Press [Paste soft key] and then press [Save soft key]. 6.4 Speed List You can add, edit or delete the Speed Dial Numbers by Speed List option on the Settings option. To speed dial one of these numbers on the idle screen, press and hold the numeric key (0 - 9) that represents the entry in the speed dial list. The number is automatically dialled without further input. !Note : Speed List record will be stored in the SIM memory regardless of Place To Save settings. Adding a new number to the Speed Dial List 1. Press [Phonebook soft key] in the idle screen. 2. Press [Option soft key] in the phonebook name list screen. 3. Select Settings option. 4. Select Speed List option. 5. Locate the menu cursor to a <Empty> list, and then press [Option soft key]. Select Add option. 6. Press [Ok soft key] after entering the new name and number.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-19.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 20 of 20 Editing a number in the Speed Dial List 1. Do step 1 to step 4 in the adding sequence. 2. Locate the menu cursor to a list you wish to edit, and then press [Option soft key]. 3. Select Edit option. 4. Press [Ok soft key] after editing the name and number. Deleting a number in the Speed Dial List 1. Do step 1 to step 4 in the adding sequence. 2. Locate the menu cursor to a list you wish to delete, and then press [Option soft key]. 3. Select Delete option. The list will be displayed as a <Empty>. 6.5 Using the Phonebook options If you press [Option soft key] after locating the menu cursor to the name you wish to do an action, the following options are available. View : views the details of the selected record. Search : searches the record you want to find. Add : adds a new record. Edit : edits the number and name of the selected record. Delete : deletes the selected record. Change Group : changes the group type of the selected record. Settings : You can set overall phonebook control. The following options are available. - Group Melody : set the Ring Melody for each group type. - Place To Save : set a default saving location. - Status : identifies the memory use in your SIM card and your phone memory. - Speed List : adds, edits or deletes the Speed Dial Number. 7. Text Editing !Note : T9 English input mode will be replaced with the adequate T9 language according to the Language Setting menu. For example, if you select ltaliano at the menu, T9 input mode will be T9 ltaliano instead of T9 English. Some languages may support only T9 English for the T9 input mode. 7.1 Input Mode You can select following text input modes by pressing [NAVI-CENTRE] on each editing screen. T9 English Multi-tap Numeric](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-20.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 21 of 21 Symbols If you are in the T9 English mode, the [#] key is used to switch the letter entry mode. ( -> -> ) If you are in the Multi-tap mode, the [#] key is used to switch the letter entry mode. ( -> ) By pressing and holding [#] key in an input mode, Symbols mode can be also selected. By pressing and holding [*] key in an input mode, Numeric mode can be also selected. The initial default input mode is automatically switched according to the Language Setting menu and the editing situation as follows. Editing a message or string in Create Message menu, in Template menu, Greeting Message menu, User Text menu, User Define CUG menu, User Define List menu (of the Broadcast menu) and Scheduler message. If the phone language is set to English, Initial default input mode : T9 English mode Optional input modes : Multi-tap mode, Numeric mode and Symbols mode. Editing a name or string in Phonebook name, Bookmarks name (Browser) and WAP Browser input. If the phone language is set to English, Initial default input mode : Multi-tap mode Optional input modes : T9 English mode, Numeric mode and Symbols mode. Editing a name in Connection Settings menu. (URL Browser editing) Initial default input mode : Multi-tap mode. Optional input modes : T9 English mode, Numeric mode and Symbols mode. mode and Symbols mode. (1) If the phone language is set to , Initial default input mode : T9 PinYin mode Optional input modes : T9 English mode, T9 Stroke mode, Multi-tap mode, Numeric mode and Symbols mode. (2) If the phone language is set to , Initial default input mode : T9 Stroke mode Optional input modes : T9 English mode, Multi-tap mode, Numeric mode and Symbols mode. Editing a name in Connection Settings menu. (URL Browser editing)](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-21.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 22 of 22 Initial default input mode : Multi-tap mode. Optional input modes : T9 English mode, Numeric mode and Symbols mode. 7.2 T9 English input mode Using the T9 English mode, you can enter words by successively pressing the key corresponding to each letter in order to get the desired word. Although each key of the numeric keypad represents several letters, only one key press per letter is required. The T9 English mode matches your keystrokes to its Linguistic Database to determine which word the user intended to spell. With each keystroke, the Word or Candidate Selection List is updated and the most likely interpretation of the keystrokes is presented. In cases where more than one interpretation is possible, T9 English mode presents interpretations in order of their frequency of use in the language. In those cases, the user selects the desired word or character from the interpretations. [Key Function Table] [Ok soft key] accepts the string entered on the edit screen, and thens turn to next menu or screen. [Clear soft key] Short : clears a character of the string entered on the editing area or clears a character on the active word(the word remain active). Long : clears all characters [NAVI-LEFT] accepts the active word and then moves the cursor to left direction by a character on the editing area. [NAVI-RIGHT] 1. accepts the active word and then moves the cursor to right direction by a character on the editing area. 2. Space [NAVI-UP] 1. switches the word entered on the editing area to previous similar word during word editing. 2. moves the cursor to previous line if you are not in a word editing. [NAVI-DOWN] 1. switches the word entered on the editing area to next similar word during word editing. 2. moves the cursor to next line if you are not in a word editing. [NAVI-CENTRE] Short : launches the character input mode selection menu. Long : toggles between the Multi-tap input mode and T9 English input mode. [END] clears all the string entered on the editing area, and then turns back to previous menu or screen. [1] Short:Smart punctuation (You can enter some popular symbol character using [NAVI-UP] or [NAVI-DOWN]) Long: Number entry. [2] - [9] Short:Text entry. Long: Number entry. [0] Short:Space (It means the previous word entry is accepted) Long: Number entry. [*] Long : switches to the Numeric input mode.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-22.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 23 of 23 [#] Short : switches the letter entry mode. ( -> -> ) Long : switches to the Symbols input mode. 7. 3 Multi-tap input mode Multi-Tap input mode provides a method of explicit spelling normally used on devices with a limited set of mechanical keys. To choose a letter on a keypad, the key is pressed the appropriate number of times, rapidly in succession, once for the first letter, twice for the second letter etc. [Key Function Table] [Ok soft key] accepts the string entered on the editing area, and then turns to next menu or screen. [Clear soft key] clears a character of the string entered on the editing area. [NAVI-LEFT] moves the cursor to left direction by a character on the editing area. [NAVI-RIGHT] 1. moves the cursor to left direction by a character on the editing area. 2. space [NAVI-UP] moves the cursor to previous line on the editing area. [NAVI-DOWN] moves the cursor to next line on the editing area. [NAVI-CENTRE] Short : launches the character input mode selection menu. Long : toggles between the T9 English input mode and Multi-tap input mode. [END] clears all the string entered on the editing area, and then turns back to previous menu or screen. [1] – [9] Short : Text entry. (See the Character List Table) Long : Number entry [0] Short : Space Long : Number entry [*] Short : Text entry. (See the Character List Table) Long : switches to the Numeric input mode. [#] Short : switches the letter entry mode. ( ->) Long : switches to the Symbols input mode. [Character List Table] Key Characters [0] SPACE](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-23.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 24 of 24 [1] . / : ? _ - = # & @ [2] A B C A A Æ C Γ a b c a a a æ β [3] D E F Δ E Φ d e f e e [4] G H I Θ g h i ì [5] J K L Ξ j k l [6] M N O N O Ø Ω m n n o o o ø [7] P Q R S Π Σ p q r s [8] T U V U t u v u u [9] W X Y Z Ψ Ω w x y z [*] , ! ‘ “ ( ) ; % + * < > 7. 4 Numeric input mode This mode uses the standard numeric keypad to allow users to enter numeric information such as phone numbers, addresses, etc. [Key Function Table] [Ok soft key] accepts the string entered on the edit screen, and then turns to the next menu or the screen. [Clear soft key] clears a digit of the string entered on the editing area. [NAVI-LEFT] moves the cursor to the left direction by a digit on the editing area. [NAVI-RIGHT] moves the cursor to the left direction by a digit on the editing area. [NAVI-UP] moves the cursor to the beginning of the string. [NAVI-DOWN] moves the cursor to the end of the string. [NAVI-CENTRE] launches the character input mode selection menu. [END] turns back to the previous character input mode. [0] Short : 0 Long : Space [1] - [9] Number entry. [*] One time of pressing : ‘ *’ Two times of pressing : ‘ +’ Long : turn back to the previous character input mode. [#] One time of pressing : ‘ .’ Two times of pressing : ‘ #’](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-24.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 25 of 25 7. 5 Symbols input mode This input mode allows users to enter symbols or formatting characters into text message. [Key Function Table] [Select soft key] accepts the symbol which cursor indicate , and then turns back to the previous character input mode. [Quit soft key] turns back to the previous character input mode. [NAVI-LEFT] moves the cursor to left. [NAVI-RIGHT] moves the cursor to right. [NAVI-UP] moves the cursor to up. [NAVI-DOWN] moves the cursor to down. [NAVI-CENTRE] accepts the symbol which cursor indicate , and then turns back to the previous character input mode. [SEND] accepts the symbol which cursor indicate , and then turns back to the previous character input mode. [END] turns back to the previous character input mode. [Available Symbols] . / : @ , ? ! ‘ - _ ( ) ; & % + * # < = > “ ￡ $ ￥ € Γ Δ Θ Λ Ξ Π Σ Φ Ψ Ω ¿ ¡ § ¤ 8. The Menu Map ! Note: Depending on the contents of your SIM card, some menu items may not be visible. Messages 1.1 SMS Inbox Outbox Create Message Template SMS Setting ------- Message Centre Validity Period Delivery Report Reply Path Message Protocol](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-25.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 30 of 30 Game & Utility 7.1 Games 7.2 Java 7.3 Biorhythm 7.4 Timer Stopwatch Countdown 7.5 Calculator 7.6 Voice Memo 7.7 Melody Composer 7.8 Converter Internet 8.1 Home 8.2 Resume 8.3 Bookmarks 8.4 Push Messages 8.5 Settings Connection Settings User Preferences Security Certificate 8.6 Empty Temp Files 8.7 Go To Address SIM AT Service ! Note : The SIM AT Service menus may be different according to the content of your SIM card. 9. The Menu Functions You can enter to menu setting mode by pressing [Menu soft key]. In the menu setting mode, three types of menu are used in your phone. The digit on the right-top side of the screen indicates the menu number, you can access the menu by pressing the menu number. [Select soft key] or [NAVI-CENTRE] is used for selecting the menu on which menu cursor is. Icon Menu](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-30.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 31 of 31 Your phone provide easy-to-understand graphical animation icon menu. You can easily understand the meaning of each graphical animation icon by the text on the top display line. To move the cursor, use [Navigation Keys]. Choice Menu You can see max 6 menu items on the menu selection area. The text in the title area indicates the name of parent menu item. The menu cursor is moved by [NAVI-UP] and [NAVI-DOWN]. Choice Menu with Value You can see max 6 menu items on the menu selection area and see the value window on each menu below. The text in the title area indicates the name of parent menu item. If the menu cursor moves to the item, the setting value of the menu item is displayed on the value window. If the menu item does not have any setting value, the value window is not displayed. The menu cursor is moved by [NAVI-UP] and [NAVI-DOWN]. 9.1 Messages 9.1.1 SMS The message can be sent by Fax, E-mail, ERMES, and X400 format, provided that these services are supported on the network. To send text messages with your phone, you need to set the Message Service Centre Number (obtained from your home network operator) on the Message Centre menu. If a message has arrived, your phone displays New Message in idle screen and sets icon to inform you of the arrival. The arrived message is saved in SIM memory as the first place. If SIM memory is full, it is saved in phone memory. Your phone has maximum 100 spaces for the SMS records in the phone memory. If the SIM memory and the Phone memory are both full, SMS Full is indicated, icon blinks and you cannnot receive any more new message. In the case, you need to delete old and unnecessary messages by using Delete, Delete Inbox or Delete Outbox option in Inbox or Outbox menu. You can create the message limit to 1064 alphanumeric characters(462 characters in case of Chinese character) at one message in Create Message menu. The long message is saved into maximum 7 records. Also, long received message is saved in same way. ! Note : The SMS service may not be available on all networks. Some network allows to be sent only within its own network. 9.1.1.1 Inbox](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-31.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 32 of 32 With this menu, You can view the new text messages or the read messages. Sender phone numbers or names (if stored in the Phonebook) are displayed on the list. The small icon on the far left side of the each list indicates following meanings. : The message is the new unread message. : The message is the read message. If you press [Select soft key], you can see the message contents with a sender phone number and its arrival time by using [NAVI_UP] and [NAVI-DOWN]. If you select [Options soft key], following options are available. Delete : Allows you to delete the viewed message. Reply : Allows you to send a reply message to the sender of the viewed message. Voice Call : Enables you to call the sender of the viewed message. Extract Number : Enables you to get all numbers(with more than 2 digits) in the message and sender’s phone number. If you select a number on the list, you can store the number into phonebook, or can make call with the number. Forward : Allows you to forward the viewed message to someone else. Edit : Enables you to edit the viewed message contents. If you select Save option, the edited message is listed in Outbox menu. Delete Inbox : Allows you to delete all messages of Inbox menu. 9.1.1.2 Outbox With this menu, you can view the saved messages which have been sent or unsent. Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. The small icon on the far left side of the each list indicates following meanings. : It is the sent message. : It is the unsent message. If you select [Options soft key], Delete, Send, Extract Number, Forward, Edit and Delete options are available. With Send option, you can send the saved message unchanged as it is. 9.1.1.3Create Message With this menu, you can write a text message of up to 1064 alphanumeric characters (462 characters in case of Chinese character), and then you can save and send the message. Input a text message and then press the [Ok soft key]. After that, enter the recipient phone number on the Destination screen. You can input the number directly or get from the phonebook by pressing the [Phonebook soft key]. If you press the [Ok soft key] on the screen, following options are available. Send : Sends the text message to the recipient phone number. The message doesn’t be saved. Save : Saves the text message and the recipient phone number. Save and Send : Saves the text message and the recipient phone number, and then sends. 9.1.1.4 Template Using this menu, you can preset text strings that you use frequently.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-32.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 34 of 34 - Connection Type You can select which connection will be used for sending or receiving SMS CS only : Only Circuit Switch Connection will be used. CS preferred : If Circuit Switch connection and GPRS connection are possible, Circuit Switch connection will be used at first. If it failed, GPRS connection will be used. GPRS only : Only GPRS Connection will be used. GPRS preferred : If Circuit Switch connection and GPRS connection are possible, GPRS connection will be used at first. If it failed, Circuit Switch connection will be used. - Status You can identify the memory use for SMS message in your SIM card and your phone memory. 9.1.1.6 Chat This chat service allows you to do chatting with standard SMS. During the chat session, you can see all the received and sent chat message on screen. Chat messages are not saved on SIM card. 9.1.2 MMS A multimedia message can contain text, images, and/or sound clips. To send Mutimedia messages with your phone, you need to set the Message Service Centre Number and the other Wap profile setting (obtained from your home network operator) on the Message Center menu and Wap profile menu. If multimedia message has arrived your phone displays New Mutimedia Message in idle screen to inform you of the arrival. Messages are stored within the local filing system. When storing messages within the filing system, the maximum number and size of stored messages is entirely dependent upon available local filing system storage space. 9.1.2.1 Inbox With this menu, You can view the new mutimedia messages or the read messages. Sender phone numbers or names (if stored in the Phonebook) are displayed on the list. The small icon on the far left side of the each list indicates following meanings. : The message inform you the new message arrived. It is not downloaded yet. : The message is the downloaded and read message. If you select [Options soft key], following options are available. Read : Reads/displays the message (and downloads it if it was deferred/left on the server). Delete : Allows you to delete the viewed or list selected message. Edit : Enables you to edit the viewed or list selected message contents. Move to : Allows you to move the message to another mailbox folder. (Inbox, Outbox,Drafts, Sent, Templates) Forward : Allows the message to be forwarded to someone else. Archive : Moves the message to the archive folder (only shown if not already in the archive folder) Save as template : Saves the message for use as a template (only shown If not already in the template folder) Details : Enables you to see the message contents.details](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-34.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 35 of 35 Delete Inbox : Allows you to delete all messages of Inbox menu. 9.1.2.2 Outbox With this menu, you can view a list of any messages waiting to be sent Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. If you select [Options soft key], following options are the same as above Inbox 9.1.2.3 Create Message The user is presented with a screen showing the first page in a blank MMS message. The screen displays the page with an informational/status bar above the message showing: . The presence of any sounds or attachments on the current page. . The size of the whole MMS in bytes or kilobytes. . The current page number/total number of pages. If you select [Options soft key], following options are available. Add receipient : Proceeds to the subject/address stage of the message creation. Insert : Adds a picture / sound to the current page, replacing any existing picture/sound. An icon at the top of the screen will indicate the presence of a sound. Delete : Deletes an object from the current page. The user will be prompted for which object to delete (it will list all picture, sound objects on the current page). Preview : Previews the current MMS message. Object prop’s : Displays a list of objects on the current page and allows their properties to be set (text, picture, sound). After selecting an object from an appropriately constructed list for the current page the user will be presented with the properties for the given object which will include: . When to appear. The time at which the object is displayed relative to the start of the current page (0s, 1s, 2s, 4s, 8s, 16s or “other”) . Displayed for. The length of time for which the object is displayed (“ maximum” , 1s, 2s, 4s, 8s, 16s or “ other” ). “ maximum” implies the object is displayed until the end of the current page. Page Add Page : Adds an additional page after the current page and makes it the active/displayed page. Delete Page : Deletes the current page (only displayed if there is at least one other page). Previous Page : Moves to the previous page in the MMS (only displayed if there is a page before the current page). Next Page : Moves to the next page in the MMS (only displayed if there is a page after the current page). Apply template : Reformats the current message using a saved template.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-35.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 36 of 36 9.1.2.4 Drafts With this menu, you can view a list of any draft messages which have been created, but are not ready to be sent Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. If you select [Options soft key], following options are the same as above Inbox 9.1.2.5 Sent With this menu, you can view a list of sent messages Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. If you select [Options soft key], following options are the same as above Inbox 9.1.2.6 Archive With this menu, you can view a list of saved/archived messages Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. If you select [Options soft key], following options are the same as above Inbox 9.1.2.7 Templates With this menu, you can view a list of messages which can be used as a starting point when creating new messages Recipient phone numbers or names (if stored in the Phonebook) are displayed on the list. If you select [Options soft key], following options are the same as above Inbox 9.1.2.8 MMS Settings Save messages : Whether to save a copy of all sent messages in the “ Sent” folder (yes/no). Read Reports : Whether to request and send read reports. Delivery Reports : Whether to request and send delivery reports. Message centre : Allows the address (URL) of the MMS proxy relay or MMSC to be set. WAP Profile : Configures which WAP profile is used to connect over when sending/receiving MMS messages. MMS lifetime Controls the lifetime of created MMS messages (1hour – 1 week or as set by network) MMS download : Controls whether new MMS messages are downloaded as soon as they are available or only when the user has confirmed they wish to receive them. Automatic : download new messages immediately in the background and notify the user when they are fully downloaded. Prompt : when a new message is available notify the user and allow the user to decide hether to download the message or not. On read : record the availability of the new message in the Inbox, but don’ t notify the user. Spam filter : Spam emails are defined as MMS messages where the message class is set to “ Advertisement” . Off : all MMS messages are accepted. Defer spam : the user is prompted whether to download a spam message. Reject spam : spam messages are rejected with no user notification.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-36.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 37 of 37 9.1.3 E-mail You can use your phone to send and receive e-mail. ! Note : Before using e-mail, make sure that you have your e-mail account and connection profile details. <Inbox> With this menu, You can view your e-mail account or e-mail messages. ! Note : Before using e-mail, set up e-mail account and connection option in E-mail Setting menu At First you enter this menu, you can see your email account list if you had set your account settings in setting menu. The small icon on the far left side of the each list indicates following meanings. : The message is the new unread message. : The message is the read message. If you press [Select soft key], you can see the message contents with a sender e-mail address and its arrival time by using [NAVI_UP] and [NAVI-DOWN]. If you select [Options soft key], following options are available. Delete : Allows you to delete the viewed message. Reply : Allows you to send a reply message to the sender of the viewed message. Voice Call : Enables you to call the sender of the viewed message. Forward : Allows you to forward the viewed message to someone else. Edit : Enables you to edit the viewed message contents. If you select Save option, the edited message is listed in Outbox menu. Delete Inbox : Allows you to delete all messages of Inbox menu. <Outbox> With this menu, you can view the saved e-mail which have been sent or unsent. Recipient e-mail address or names (if stored in the Phonebook) are displayed on the list. The small icon on the far left side of the each list indicates following meanings. : It is the sent message. : It is the unsent message. If you select [Options soft key], Delete, Send, Extract E-mail Address, Forward, Edit and Delete options are available. With Send option, you can send the saved e-mail unchanged as it is. <Create Message> With this menu, you can write a e-mail, and then you can save and send the message. Input a e-mail and then press the [Ok soft key]. After that, enter the recipient e-mail address on the Destination screen. You can input the e-mail address directly or get from the phonebook by pressing the [Phonebook soft key]. If you press the [Ok soft key] on the screen, following options are available. Send : Sends the e-mail to the recipient e-mail address.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-37.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 39 of 39 ! Note : The voicemail service may not be available on all networks. For more details, please contact your network service provider. < Connect Voicemail> With this menu, you can listen to the voicemails you have received. <Number Setup> With this menu, voice mailbox numbers can be stored. - Home Mailbox The voicemail number is to dial when you are on the home network to listen to the voicemail. - Roam Mailbox The voicemail number is to dial when you are on the other network to listen to the voicemail. 9.1.5 Broadcast This network service allows you to receive the broadcasted text messages on various topics such as weather, traffic, local district code, local hospitals, taxis or pharmacy in the area where you are. You can even receive the message to be in a particular language. (For example, when you are abroad) by using Language List option. For more information about topics, please contact your service provider. ! Note : This service may not be available on all networks. <Read All Messages> With this menu, you can read all the broadcasted text messages received. In title area of the screen, the name of the message subject item is displayed. The contents of the message subject are updated whenever new contents are received. If the message subject is not sent from the area you are, No Message is displayed. You can read the message through by pressing [NAVI-DOWN]. To move to next message subject item, press [Next soft key]. <Receive Setting> This menu allows you to enable or disable the reception of the broadcasted text messages. All : Enables to receive all broadcasted text messages regardless of the setting of Subject List and Language List. Active List : Enables to receive all broadcasted text messages depending on the setting of Subject List and Language List. Disable : Disables to receive the broadcasted text messages. <Display On Idle> This menu allows you to enable or disable to view new broadcasted text messages in the idle screen. On : New broadcasted text messages are displayed in the idle screen.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-39.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 41 of 41 9.2.1 Dialled Calls This menu lets you view the last 10 dialled calls. In the dialled calls list, you can view the details of the record by pressing the [View soft key]. In the view screen you can make a call to the number by pressing [SEND], or can paste the number to the idle screen by pressing [Paste soft key] and then can save the record to the phonebook by pressing the [Save soft key]. You can delete a record in a view screen by pressing [Delete soft key]. 9.2.2 Received Calls This menu lets you view the last 10 received calls. In the received calls list, you can view the details of the record by pressing the [View soft key]. In the view screen you can make a call to the number by pressing [SEND], or can paste the number to the idle screen by pressing [Paste soft key] and then can save the record to the phonebook by the pressing the [Save soft key]. You can delete a record in a view screen by pressing [Delete soft key]. 9.2.3 Missed Calls This menu lets you view the last 10 missed calls. In the missed calls list, you can view the details of the record by pressing the [View soft key]. In the view screen you can make a call to the number by pressing [SEND], or can paste the number to the idle screen by pressing [Paste soft key] and then can save the record to the phonebook by pressing the [Save soft key]. You can delete a record in a view screen by pressing [Delete soft key]. 9.2.4 Delete Records This menu lets you delete the record of the recent calls. Following options are available. All Calls: deletes the record of all recent calls. Dialled: deletes the record of the dialled calls. Received: deletes the record of the received calls. Missed: deletes the record of the missed calls. 9.2.5 Cost & Duration You can view the cost and duration of the last call, or all calls. Costs are shown only if your network operator supports this service. The following options are available. Last Call : allows you to check or reset the cost and the duration of the last call. All Calls : allows you to check or reset the cost and the duration of all calls. If you press the [Reset soft key], you may have to enter your PIN2 according](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-41.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 42 of 42 to SIM card contents. Maximum Cost : allows you to check or change the maximum limit for the cost of calls. If you press the [Change soft key], you must enter your PIN2. The value that multiplied the entry by the value set at Price & Unit option is displayed. Price & Unit : allows you to set the cost of one unit and currency code. This price per unit is applied when calculating the cost of calls. If you press the [Change soft key], you must enter your PIN2. ! Note: Not all SIM cards support this feature. The number of items in these lists depends on the contents of your SIM card. 9.2.6 Data Counter You can view the size of the sent data, the received data and total data transferred in the Last Data session or All Data sessions. The following options are available. Last Data : allows you to check or reset the data size used in the last session. All Data : allows you to check or reset the data size used in the all sessions. 9.3 Phone Setting 9.3.1 Own Numbers This menu displays your phone numbers. You can view, add, edit, and delete the numbers, stored in your SIM card. 9.3.2 Language You can select in which language the display text is shown. If you select Automatic, the display text is automatically displayed according to the country of your SIM card. This setting also determines which text input mode is selected when you write a text message. For details, please see section 7. 9.3.3 Sound Setting With this menu, you can customize various audible settings. ! Note : To switch on the silence mode, press and hold [VOLUME-UP] on the left side of phone in the idle screen. To switch off the mode, press and hold down [VOLUME-UP] again. If your phone is in the silence mode, all audile key tones and melodies are prohibited and all alerts are changed to the vibrator regardless of the setting in this menu. The audio profile menu allows you to access a group of pre-defined settings. A profile is a group of audio settings which are set to suit a wide variety of events and environments (e.g. meetings, movies, etc). There are six types of profiles; Normal, Meeting, Outdoor, Car, Silent and VIP profiles.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-42.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 43 of 43 The table below shows the default settings of each profile. Normal Meeting Outdoor Car Silent VIP Ring Type Melody Vibrator Melody + Vibrator Melody Light Melody + Vibrator Ring Volume Level 7 Level 0 Level 7 Level 7 Level 0 Level 7 SMS Alert Type Melody Vibrator Melody Melody Off Melody SMS Alert Volume Level 7 Level 0 Level 7 Level 7 Level 0 Level 7 Key Tone Volume Level 5 Level 0 Level 7 Level 5 Level 0 Level 5 Speaker Volume Level 6 Level 6 Level 7 Level 7 Level 6 Level 7 Game Volume Level 5 Level 0 Level 7 Level 5 Level 0 Level 5 <Ring Type> This menu allows you to select how to be informed of any incoming call. Following types are available. Melody : Your phone rings using the ringing melody selected at menu option of Ring Melody option. Vibrator: Your phone rings using the vibrator. Light: Your phone rings using the backlight illuminated on the Sub-LCD screen, rather than the normal ringing tone or vibrator. Melody + Vibrator: Your phone rings using both melody and vibrator simultaneously. <Ring Volume> This option allows you to adjust the ringing volume to one of eight levels. Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key]. <SMS Alert Type> This menu allows you to select how to be informed of new incoming SMS message. Following types are available. Melody : Your phone alerts using the SMS alert sound selected at menu option of SMS Melody option. Vibrator: Your phone alerts using the vibrator. Off : Your phone does not alert with sound or vibrator. <SMS Alert Volume> This option allows you to adjust the SMS alert volume to one of eight levels. Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key]. <Key Tone Volume>](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-43.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 44 of 44 This option allows you to adjust the key volume to one of eight levels when you press a key. Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key]. <Speaker Volume> This option allows you to adjust the speaker or earpiece volume to one of eight levels when you are in active call state. Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key]. <Game Volume> This option allows you to adjust the game volume to one of eight levels when you play a game. Use [NAVI-UP] and [NAVI-DOWN], and then press [Select soft key]. 9.3.3.1 Profiles This option allows you to activate and change the settings of the selected profile according to your wish. ! Note : If your phone is in the silence mode, this menu is not visible. 9.3.3.2 Key Tone Type This option allows you to select the tone that the keypad generates when you press a key on the idle screen. Following types are available. Tone : When a key is pressed, your phone makes a different sound(DTMF Tone) for different keys. Voice : When a numeric key is pressed, your phone makes voice for each numeric keys. Beep : When a key is pressed, your phone makes same sound for different keys. Waterdrop : When a key is pressed, your phone makes water drop sound. Off : When a key is pressed, your phone makes no sound. 9.3.3.3 Ring Melody This menu allows you to select which melody is used for any incoming call. You can select the melody that you prefer among various melodies. Furthermore, you can select following melody as Ring Melody. 9.3.3.4 SMS Melody This menu allows you to select how to be informed of any SMS message delivery. You can select the melody that you prefer among various melodies. 9.3.3.5 Rising Volume With this menu set to On, the alert volumes for incoming call and alarm tones are to be ramped. 9.3.3.6 Connect Tone With this menu set to On, your phone beeps at connecting to a network during a making call. ! Note : This function may not be possible on all networks.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-44.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 46 of 46 The following options are available. On :.Enable network name display on Main and Sub wallpaper. Off : Disable network name display on Main and Sub wallpaper. <External Light> 9.3.5 Clock Setting <Set Time> This menu allows you to change the time displayed in the idle screen. You can use numeric key ([0]~[9]) to change time value and use [NAVI-LEFT] or [NAVI-RIGHT] to change the setting place. If you have selected 12 Hour time format, you can change am/pm value by pressing [NAVI-UP] or [NAVI-DOWN]. <Set Date> This menu allows you to change the date displayed in the idle screen. You can use numeric key ([0]~[9]) to change date value and use [NAVI-LEFT] or [NAVI-RIGHT] to change setting place. <Time Update> This menu allows you to change time update option. If you select automatic, the time in your phone is set by network. ! Note 1. This option only takes effect using GPRS SIM card. 2. For the automatic update setting to take effect, the phone needs to be restarted. <Time Format> This menu allows you to change time format between 12 Hour and 24 Hour. <World Time> This menu allows you to identify what time it is in various cities around the world. You can easily set your local time in another country by pressing [Set Local soft key]. 9.3.6 Call Setting <Caller Number> This menu prevents your phone number from being displayed on the phone of the person being called. The following options are available. Default : The default setting provided by the network is used. Hide Number : Your phone number is not displayed on the called person's phone. !Note : In some network, when you make a call with hiding the telephone number, the network does not allow to make the call. Send Number : Your phone number is displayed on the called person’s phone each time you](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-46.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 47 of 47 make a call. <Any Key Answer> With this menu, you can answer an incoming call by pressing any key except the [End soft key] or [END]. On: You can press any key except the [End soft key] and the [END] to answer an incoming call. Off: You can only press the [Answer soft key] and the [SEND] to answer an incoming call. <Folder Answer> With this menu, you can answer an incoming call with just [SEND] regardless the folder opening. On: You can answer the incoming call by the folder opening. Off: You can answer the incoming call by only [SEND] regardless the folder opening. <Auto Redial> With this menu, your phone makes up to five attempts to redial a phone number after an unsuccessful call. The following options are available. On: The number entered is redialled automatically. Off: The number entered is not redialled. ! Note: The number of retrial may be variable according to the cause of the unsuccessful call. If you press any key or close the folder cover, or if an incoming call or SMS is arrived, the redialling mode is stopped. 9.3.7 Connection Setting <MMS Profiles> <E-mail Profiles> <WAP Profiles> <GPRS Setup> 9.3.8 Security Setting To access this menu, you must first enter the Lock Code. The feature enables you to protect the use of your phone. Various codes and passwords are used to protect your phone. They are described in the section 3. ! Note : The Lock Code is factory set to 0 0 0 0. <PIN Access> With this menu set to Enable, your phone asks to enter the PIN each time the phone is switched](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-47.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 48 of 48 on. If Disable, doesn't ask to enter the PIN. <SIM Lock> With this menu set to Enable, your phone asks to enter the SIM Lock Code when a different SIM card is inserted. If Disable, your phone doesn't ask to enter the SIM Lock Code. <Phone Lock> With this menu set to On, your phone will be locked. The display asks you to enter the Lock Code each time the phone is switched on. <Phonebook Lock> With this this menu set to On, your phonebook will be locked. The display asks you to enter the Lock Code each time you enter the phonebook. <Album Lock> With this this menu set to On, your Album will be locked. The display asks you to enter the Lock Code each time you enter the Album. <Change Code> You can change all security codes in this menu. - Lock Code You can change your current Lock Code to new one in this menu. - PIN Code You can change your current PIN to a new one in this menu. - PIN2 Code You can change your current PIN2 to a new one in this menu. - Password You can change your network password in this menu. You need a password to activate network call barring. The network password is supplied by your network service provider and is not the same as the PIN for your SIM card. <Fixed Dial Number> To change the setting of this menu, you must first enter the PIN2. With this menu set to Enable, FDN mode is enable and you can only make a call with the numbers that are stored in the FDN list. You can find, add, edit or delete the FDN numbers list by pressing [Phonebook soft key] in the idle screen after enabling the FDN mode. If Disable, FDN mode is disable and you can make a call in normal way. <Factory Reset> This menu enables you to restore the default value of the phone setting value.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-48.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 49 of 49 9.4 Camera & Media 9.4.1 Camera <Taking Picture> This menu allows you to take pictures with the phone’ s built-in camera and adjust its settings. You can take a picture by pressing [NAVI-CENTRE]. If you press [Setup soft key], You can adjust the following settings. - Resolution - Zoom - Brightness - Color mode - Skin <Picture Decoration> This menu allows you to compound the picture and the background image. <Camera Setting> This menu allows you to adjust additional functions. Resolution : Enables you to change Resolution. Self Timer : Enables you to take a picture with the timer. Shutter Sounds : Enables you to choose a shutter sound. Saving Mode : Enables you to select whether save picture automatically or manually. 9.4.2 Image File <Photo Album> This menu allows you to view, organise, delete and send pictures stored in your phone. <Downloaded Image> This menu allows you to view, organize, delete and send images stored via messaging or WAP service. 9.4.3 Audio File <Voice Record File> <Composed Melody> <Downloaded Audio> Using this menu, you can download a melody through the Internet or SMS message. The downloaded melody is linked to Ring Melody list, Alarm Tone list or Group Melody list. Your phone supports only Smart Messaging Type (RTTTL) of melody for the download.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-49.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 50 of 50 9.4.4 File Manager This menu allows you to organize and delete files stored in your phone. 9.5 Organiser 9.5.1 Calendar With this menu, you can use calendar function and scheduler function. If you enter this menu, the date cursor is on the today’ s date. Further, the lunar date corresponding to today is also displayed on the top-right side. If the date on the cursor has schedule list, then adequate icons of the schedule are displayed on the bottom-right side. You can use key on the calendar as follows. [NAVI-LEFT] or [NAVI-RIGHT] : One(1) day decrement or increment. [NAVI-UP] or [NAVI-DOWN] : Seven(7) days decrement or increment. [*] or [#] : One(1) month decrement or increment. The scheduler function helps you keep track of reminder, calls, meetings, birthdays, travels or wedding that you need to know. Your phone sounds adequate melody alarm when the set date/time for the schedule is reached. You can add up to 100 schedule list. Six(6) schedule types are available for the schedule. : It indicates Reminder schedule. : It indicates Meeting schedule. : It indicates Birthday schedule. : It indicates Call schedule. : It indicates Travel schedule. : It indicates Wedding schedule. Following scheduler options are available. View Today : enables you to view the schedule list of the date. View Week : enables you to view the schedule list of the week. View Month : enables you to view the calendar and schedule. Go to date : enables you to go specific date. Manage Schedule : enables you to add and delete schedule. View Biorhythm : enables you to view your biorhythm of the date. Setting :enablesyoutosetcalendaroption. 9.5.2 View Today Report This menu enables you to review today schedule and biorhythm. 9.5.3 Alarm](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-50.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 54 of 54 The list will be listed up into the CUG Select menu list. 9.6.6 Network Selection The Network Selection feature enables you to select whether the network to be registered on roaming (outside your home network area) is searched automatically or manually, and enables you to set up a preferred network list to be used when selecting a network automatically. <Selection> If you select Automatic, your phone will be connected to the first available network in the order of your home network and then your preferred network list which are available on roaming. If you select Manual, your phone will scan for the available network and display all available networks list in your area. The small icon on the far right side of the each list indicates following meanings. : The network is an available network to connect to. : The network is not an available network to connect to. You can select the network you wish to connect to from this networks list. If your phone loses the network signal of the selected network operator, it displays the screen of the manual selection. ! Note: If you select the unavailable network manually, your phone cannot get the network service. You have to change the network selection mode to Automatic or select the available network manually. <Preferred List> This menu allows you to list your preferred networks to be used when roaming. This function is available when the network selection mode is Automatic. Your phone connects to the networks in order of appearance in this networks list, if the networks are available in your area. You can add or delete the networks list by pressing [Option soft key]. 9.7 Game & Utility 9.7.1 Games When you select this menu, you can see embedded games and downloaded games. You can change the game volume in Game Volume menu on the Edit Profile menu. You can also change the game volume while during you are enjoying the game, by pressing [*] or [VOL-DOWN] to decrease the volume, [#] or [VOL-UP] to increase the volume. 9.7.2 Java 9.7.3 Biorhythm](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-54.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 55 of 55 When you enter this menu, Set Birthday will be prompted if you have not input before. Three sine waves about your birthday are displayed on the biorhythm screen. The blue colour of wave indicates your physical rhythm this month. The red colour of wave indicates your emotional rhythm this month. The green colour of wave indicates your intellectual rhythm this month. The vertical line indicates today. If you enter the birthday of other person by pressing [Birthday soft key], you can see his biorhythm. 9.7.4 Stopwatch <Stopwatch> The stopwatch can check nine(9) laps time and save one record.(One record is composed of nine(9) lap times) When the stopwatch is not running, you can start or restart and reset the stopwatch. In running state, you have two choices (stop and save lap time). If you press [Lap Time soft key], the total time does not stop but present lap time stop and new lap time immediately start. Also you can save present record or load previous record. Whether the stopwatch is running or not, you can directly check lap lap time by pressing numeric key ([0]~[9]). In screen first big number is total time, and small two lines show you lap time with lap time order. [Key Function Table] [Start soft key] starts or restarts the stopwatch [Stop soft key] stops the stopwatch [Reset soft key] resets and delete present record [Lap Time soft key] saves the lap time or reset the stopwatch (when pressed and held)[NAVI-LEFT] checks saved lap times backward (previous lap time) [NAVI-RIGHT] checks saved lap times forward (next lap time) [NAVI-UP] saves present record in not running state [NAVI-DOWN] loads saved record in not running state [0]~[9] directs check saved lap time directly [END] ends the stopwatch and then turns back to the previous menu ! Note: The stopwatch is not turned off when you answer an incoming call or the phone is sounding an alarm. But if you don’t save record and press [END], record will be lost. <Countdown> You can check countdown timer by using this menu. Enter : enables you to enter countdown main screen. You can set time and start the timer. Countdown Tone : enables you to select countdown expiry tone. Auto Repeat : enables you to decide whether the countdown timer restart automatically or not.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-55.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 56 of 56 9.7.5 Calculator Your phone has built-in engineering calculator, which can perform basic arithmetic operation and scientific function. Some of its features include: - Normal and scientific output (addition, subtraction, division and multiplication) - Support for all standard mathematical functions (sin, cos, tan, asin, acos, atan, sinh, cosh, tanh, exp, log, log10 and sqrt) - More than 15 built-in variables for memories labelled A to Q. Press the [Answer soft key] to display the result of an arithmetic operation. Press the [Clear soft key] once to erase a figure to the left of the cursor. Use the [*] key to enter the decimal part of a number or special symbols such as ., (, ), ^, e, !, <, > and =. Use the [#] key to see helpful information for calculation. Use the [NAVI-CENTRE] key to enter Option menu for function and memory. 9.7.6 Voice Memo With this menu, you can record up to three(3) voice memos. The voice memo is linked to Ring Melody list, Alarm Tone list or Group Melody list. Following options are available. Play : enables you to hear the voice memo on the list. Delete : deletes the recorded data of the voice memo on the list. Record : enables you to record voice into the voice memo on the list. Thereafter, the voice memo on the list indicates time and recording period time on the memo name. Delete All : deletes all of the recorded data on the list. 9.7.7 Melody Composer This function allows you to compose your own melodies to be used as the ring tone. Three octaves are available. A maximum of 50 notes can be entered. You can adjust the length of a note and add a rest, as required. You can compose melodies. 1. When you access the menu, the names of melodies created are displayed. Otherwise, predefined names appear. Select the melody that you wish to create or edit.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-56.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 57 of 57 2. Then you can see musical paper and compose your melody using the following keys. [1] C (Do), the first note in the musical scale [2] D (Re) [3] E (Mi) [4] F (Fa) [5] G (Sol) [6] A (La) [7] B (Si) [0] Rest [*] moves a note up or down one octave [#] makes a note a semitone up. (For example ) [8] increases the length of a note or a rest [9] decreases the length of a note or a rest [NAVI-UP] moves a note a tone up (For example, the note A changes to A#, B, C, C#, and so on in the scale each time you press the [NAVI-UP]key) [NAVI-DOWN] moves a note a tone down (For example, the note C# changes to C, B, A#, A, and so on in the scale each time you press the [NAVI-DOWN]key) [NAVI-LEFT] moves the note cursor to the next note [NAVI-RIGHT] moves the note cursor to the previous note [Clear soft key] Short : clears the note in the note cursor Long : Clears all musical paper [Option soft key], [SEND] or [NAVI-CENTRE] launches Option menu [END] turns back to previous menu or screen If you press [Option soft key], [SEND] or [NAVI-CENTRE], the following options are available. Play : Listens to your melody Save : Saves your melody Add To Ring Melody : Saves your melody and add it to ring tone melody. Delete : deletes your melody Set Control Section : sets control parameters on the paper such as speed, style and volume.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-57.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 58 of 58 3. When you are satisfied with your melody, press the Save or Set Control Section in options. 4. Enter a title name for your melody 5. If you press [Ok soft key], the melody is saved. The composed melody is linked to Ring Melody list, Alarm Tone list or Group Melody list. 9.7.8 Converter 9.8 Internet WAP is a standard specifically created for mobile communications devices and gives fast and easy access to the Internet information and services. Now you can find a lot of useful information by using the micro browser in your mobile phone, instead of using your computer. There are WAP service available that you will be able to access, such as reservation services, news, sports and weather, games ad banking, etc. The ways in which you can go to a WAP page are as follows: - Selecting Home menu. - Selecting a address list in Bookmarks menu - Entering its address either in the Go to address menu or in the WAP browser Press the navigation key[NAVI-CENTRE] to connect directly to Internet services in the idle screen. Browser In the WAP browser, you can see the call status icon. The call status icon indicates the call connection status. The available icons are as follows. : shows that the data call is currently being connected : shows that the data call is disconnected. : shows that the data call is in the Secure Mode. You can highlight the specific hyperlink with a cursor that is indicated as an underline each and view the content by selecting the highlighted hyperlink. You may choose these items pressing the [NAVI-CENTRE], [SEND] and [Select soft key] in the screen. If you press [Option soft key] on the browser, you can use the following available options. The options depend on the contents of the WAP site. Home : connects to the homepage you defined in the profile Refresh : reloads the current page Select : follows the highlighted hyperlink Back : navigates back one page in the history list](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-58.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 59 of 59 Stop : stops a browser action Add Bookmark : adds a new list to the bookmarks for the Web page you are viewing Bookmarks : presents the list and allows you to go to the Web page you want. Go to Address : allows you to enter a URL to browse to Top : jumps back to the top of the current page Exit : exits the browser at any time, then the idle screen will be displayed. The following keys are available for use when browsing: [NAVI-UP] : moves the screen upwards. [NAVI-DOWN] : moves the screen downwards. [NAVI-LEFT] : moves the screen to the left (if the horizontal scroll bar is available). [NAVI-RIGHT] : moves the screen to the right (if the horizontal scroll bar is available). [NAVI-CENTRE] or [SEND]: selects an item (if it is a selectable item). [END] : exits the browser. Note!: Although the call is not in active state, if you ask the browser to do an action (by selecting an option menu or by pressing the [Back soft key] ), it automatically makes a call and tries to reconnect to the WAP site. 9.8.1 Home Once a connection profile has been set up, you can connect to the home page you defined. 9.8.2 Resume You can access the WAP site that you accessed before. If you have not accessed any site, your phone is connected to the home page. 9.8.3 Bookmarks You can access the list of bookmark sets in this menu. The following four options are available by pressing [Option soft key]. Add Bookmark : creates a new bookmark name/URL. Go To : launches the WAP browser and loads the page bookmarked. Edit : allows you to alter the name/URL of the bookmark. Delete : deletes the current bookmark. 9.8.4 Push Messages You can receive push messages sent by your service provider. The push message is a kind of notification from network, for example, stock news, weather news, headline news or e-mail. If a push message has arrived, your phone displays New PUSH Message in the idle screen and sets icon to inform you of the arrival. If you select [View soft key], you can view the received push messages on the list. The small icon on the far right side of the each list indicates following meanings.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-59.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 60 of 60 : indicates that you have not accessed a Internet site related to the PUSH message of the list. : indicates that you have accessed a Internet site related to the PUSH message of the list. If you select [Options soft key], following options are available. Info : Allows you to view the received push message. If you press [Select soft key] in the viewer, you can connect to Internet to view more information. Load : Allows you to go to the site linked with the received push message. Delete : Allows you to delete the received push message Delete All : Allows you to delete all of the received push messages. 9.8.5 Settings <Connection Settings> A WAP profile consists of a group of network settings. After having set them up, you simply switch between the different WAP profiles, without having to re-enter the settings every time you want to change your network connection. At first, select a profile you want to set up. And then you will be asked if you want to activate, edit, rename or delete the profile with options. - Activate This option activates the chosen setting as a current WAP setting to be used for the WAP connection. - Edit This option edits the WAP setting values to connect to Internet. ! Note : The setting value varies according to the WAP service provider. So please contact your network service provider for the values before using WAP services. If you select Edit, the following options are available. Homepage : Enter the address of the WAP page that you want to use as your home page for the WAP profile. Connection Type : Select type of internet connection. Temporary is a non-confirmed (connectionless) service. Continuous is a confirmed delivery mechanism but generates more network traffic. Connection Options : The options are None or Secure and depend on the gateway you are using.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-60.png)
![Colour Mobile Phone Dualband i2100 User’s Guide INNOSTREAM Confidential PAGE : 66 of 66 registered to the network. 7. If any tone is not generated when you press a keypad. You need to check the silent mode setting. If you can find icon on the top of the main display screen it is the silent mode. By pressing and holding [VOL-UP] on the idle screen, you can switch it off. You need to check the Key Tone Type of User Preferences menu. You need to check Key Tone Volume of the profile option that you have set on Activate Profile menu. 8. If an audible alert is not made when a call is received. You need to check the silent mode setting. If you can find icon on the top of the main display screen it is the silent mode. By pressing and holing [VOL-UP] on the idle screen, you can switch it off. You need to check Ring Type and Ring Volume of the profile option that you have set on Activate Profile menu. 9. If an audible alert is not made when an alarm is expired. You need to check the silent mode setting. If you can find icon on the top of the main display screen it is the silent mode. By pressing and holing [VOL-UP] on the idle screen, you can switch it off. 10. If an outgoing call is not made. You have probably set an outgoing calls barring option. You need to check Call Barring menu. Otherwise, you have probably set to Hide Number in Caller Number menu of Call Setting menu. In some network, when you make a call with hiding the telephone number, the network does not allow to make the call. 11. If an incoming call is not made. You have probably set an incoming calls barring option. You need to check Call Barring menu. 12. If an outgoing SMS message is not sent. You need to check the Message Centre option in Message Setup menu. 13. If all audible key tones are muted and all audible alerts are changed to vibrator alert. You need to check the silent mode setting. If you can find icon on the top of the main display screen it is the silent mode. By pressing and holing [VOL-UP] on the idle screen, you can switch it off. 14. If some menus relevant to the sound are not visible on the Sound Setting menu. You need to check the silent mode setting. If you can find icon on the top of the main display screen it is the silent mode. By pressing and holing [VOL-UP] on the idle screen, you can switch it off.](https://usermanual.wiki/Innostream/I-2100/User-Guide-366588-Page-66.png)
