Innovative Concepts and Design UHF-6100-R2 Wireless Receiver User Manual
Innovative Concepts and Design LLC Wireless Receiver
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4105855 |
| Application ID | Fqriky3m4QTRT0Rr93vqPQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.33kB (429076 bits) |
| Date Submitted | 2018-12-14 00:00:00 |
| Date Available | 2018-12-14 00:00:00 |
| Creation Date | 2018-11-01 15:45:35 |
| Producing Software | Corel PDF Engine Version 18.0.0.448 |
| Document Lastmod | 2018-11-07 11:02:15 |
| Document Title | UHF-6000系列英文说明书-X6.cdr |
| Document Creator | CorelDRAW X8 |
| Document Author: | info |
UHF-6100 WIRELESS RECEIVER 3 4 5 Front 10 11 12 Rear Parts Description 1. On/Off switch: Turn on/off the receiver. 2. Infrared (IR) port: Broadcasts IR signal to transmitter to synchronize frequencies. 3. Menu switch: Press to scroll through menu options. 4. Select switch: Press to select the currently displayed menu option. 5. Sync Button: Press to initiate IR connection between receiver and transmitter. 6. LCD display: display group, channel no, RF and AF level. 7. Volume control: Turn to adjust volume. 8. Antenna connector: To install supplied antenna here. 9. Individual Balanced XLR output 10. Mixed 1 / 4 " output jack 11. MIC/LINE switch 12. DC input jack Specifications Frequency Range: 512~537.5MHz Frequency Stability: 10ppm Sensitivity: 13dBuV Adjacent channel rejection：75dB Image rejection: 95dB Audio Output：200MV Output Impedance: XLR connector: 200 ; 1 / 4 inch connector: 1k S/N ratio: 100dB Total Harmonic Distortion: < 0.1% Frequency response: 50Hz-15KHz Operating Range :60m( in line and sight area) Power supply: DC12V/500mA Receiver Programming Note: Transmitting devices such as cellular phones and two-way radios may interfere with wireless audio transmissions. Keep your transmitters and receivers away from these and other potential sources of interference. 1. Turn on receiver. LCD will light. 2. Group Selection a. Press “MENU” button to move cursor to “GROUP SELECT”. b. Press “SELECT” button to increase the group number by one. c. When the correct group is displayed, either wait five seconds for the screen to time out, or press “SYNC” button. 3. Channel Selection a. Press “MENU” button again to move cursor to “CHANNEL SELECT” . b. Then press “SELECT” button to increases the channel number by one. c. When the correct channel is displayed, either wait five seconds for the screen to time out, or press “SYNC” button. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : info Create Date : 2018:11:01 15:45:35+08:00 Modify Date : 2018:11:07 11:02:15+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : info Title : UHF-6000系列英文说明书-X6.cdr Creator Tool : CorelDRAW X8 Metadata Date : 2018:11:07 11:02:15+08:00 Producer : Corel PDF Engine Version 18.0.0.448 Document ID : uuid:577de12a-34cb-4f28-8aed-35959648f4f2 Instance ID : uuid:b443d77b-f523-4e20-ae99-9e73561357c8 Page Count : 2 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools