Innovative Technology Electronics SBC10 BLUETOOTH SPEAKER COOLER User Manual ITBSC 10 Manual 041817 lores

INNOVATIVE TECHNOLOGY ELECTRONICS LLC BLUETOOTH SPEAKER COOLER ITBSC 10 Manual 041817 lores

User Manual

Download: Innovative Technology Electronics SBC10 BLUETOOTH SPEAKER COOLER User Manual ITBSC 10 Manual 041817 lores
Mirror Download [FCC.gov]Innovative Technology Electronics SBC10 BLUETOOTH SPEAKER COOLER User Manual ITBSC 10 Manual 041817 lores
Document ID3377072
Application IDO5sV2vyN3gEWqn+RMSfs6Q==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize277.53kB (3469178 bits)
Date Submitted2017-05-02 00:00:00
Date Available2017-05-02 00:00:00
Creation Date2017-04-18 13:45:19
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2017-04-18 13:45:44
Document TitleITBSC-10-Manual-041817-lores
Document CreatorAdobe Illustrator CC 2017 (Macintosh)

@ innovative technology.~
Bluetooth” Speaker Cooler
Model: ITSBC-1O
Instruction Manual
Please read these instructions fully before using and keep for future reference.
QUIC START GUIDE
1. Make sure to remove all items before discarding package. This includes:
— Bluetooth Speaker Cooler
- User Manual
- Micro USB to USB Charging Cable
2. Turn the unit ON: Press and hold the STANDBY button to wake up the unit,
Bluetooth indicator will begin to flash blue.
sun oav
surroN
VOLUME‘
aquroom VOLUME
aurron
POWER ourPur
(Use Por| iorchargingl
AUXIN POWERiNPUT
pom {Micro usaizmi
3. Connect your smartphone. tablet or other audio device via Bluetooth.
- Activate the Bluetooth function on your external device.
- Select “lTSBC-lD" on your device to begin pairing. You will hear an audio
beep. signifying your device is paired and the Bluetooth indicator stays lit.
- Begin playing music from your device.
4. Charge your smartphone or tablet via USB.
- Using your device’s specific charging cable (Apple‘ Lightning” cable, Micro
use cable, etc), plug your smartphone, tablet or other use powered device
into the use Output Port. Your device will automatically begin charging.
Charging will continue until your device is iully charged or the Power Bank
has drained. Important: Please check for voltage compatibility with your
device prior to use.
CONTENTS
Safety Instructions .......................
Product Specifications .................
Buttons and Controls
General Operation ........................
Bluetooth Operation .....................
AUX IN Operation..
Power Bank Operation .................
Battery Charging...
Troubleshooting .............
Important Information ..................
Warranty ............
SAFETY INSTRU IONS
The llcrltnlnc rasr wllh allawhmd vlllhlrl :m
eoullatelsl 'lldnwle ls lntended loalm no
use In the presence Dlunlllwla‘kd
“dangemusvnluqe‘ wrnlrl tr: Dmducls
enclosure lnel l'lay be ol Sumclenl nevnltude
loco lsmulszrlsk D'elenvl: shock
CAUTION
alsk uF ELECTRIC shock
on No‘l’ aPEN
CAUTlON- TO PREVENT
RISK OF ELECTRIC SHOCK,
o No' amovz DWERloR BACK‘l
Na us. rsEvaCEABLE PARVSlNSlDE agree
SEWlEthYO OJALlFlED sEvacE re . sloua.
The cxclnmmlall oolnrrllthlll :m coullarsol
lrlsrole ls lnlerded la alert the userto lne
presume nl llnsollalll onslallrg am
mal'lmrlarlm tscrvlclnel l'lslmc'larls n ma
lltelelure :ccamva'lylnw the abvllme
Belore using the unit, be sure to read all operating instructions caretully, please note that these
are general precautlona and may not pertaln to your unlt. For example. this unlt may not have
the capahlllty to be connected to an outdoor antenna.
91>ng
Read these lnstructlons . All salety and operatlng lnstructldns should he read oerdrethe product ls operated
Keep these lnstructlons . The salety and operatlng lnstructlons should he retalned tor luture relerence.
need all warnlngs - All warnlngs on the product and ln the operatlng lnstructlon manual should be adhered to
Followlhese lnstructlons . All operatlng and use lnstructlons should he lollowed
Do not use thls apparatus near water Do not use the product near water and rnolsture, lorexample: near
a hathtub, washoowl, kltchen slnk or laundry tuo ln a wet basement or near a swlmmlng pool
.m
top or the product.
The product must not be exposed to drlpplng ol splashlng. and not oblect lllled Wlth llquld should be placed on
7 clean only wlth sllghtly molst, llnHvee cloth Unplug thls product rrom the wall outlet oerore cleanlng Do not
use llduld cleaners or aerosol cleaners
Do not block any ventllatlon openlngs. lnstall ln accordance Wlth the manulacturer's lnstructlons slots and
openlngs ln the caolnet and ln the pack or bottom are provlded tor ventllatlon. to ensure rellaole operatlon ol
the product and to protect lt lrom overheatlng. These openlngs must not be blocked or covered The openlngs
should never he olocked oy placlng the product on a oed, sora, rug orotherslmllarsurrace Thls product should
never be placed near or over a radlator or heat source Thls product should not he placed ln a bullHn
lnstallatlon such as a bookcase or rack unless proper ventllatlon ls proylded or the manutacturer's lnstructlons
have been adhered to
9. Do not lnstall near any heat sources such as radlators, heat redlsters, stoves, or other apparatus [lncludlng
ampllllers) that produce heat.
to Do not deleat the salety purpose olthe polarlzed ovgmundlngrlype plug A polarlzed plug has two blades and
athlrd groundlng prong The wlde blade or the thlrd prong are provlded lor your salety. It the proylded plug
does not llt lntd your outlet, consult an electrlclan lor replacement or the obsolete outlet
l .
receptacles. and the polnt where they exll lrom the apparatus.
12 Only use attachments/accessorles speclrled pythe manulacturer
l3. Use only wlth the cart, stand, trlpod, bracket or table spectlled by the rrlanutacturer, or sold wlth
the apparatus When a cart ls used. use cautlon when movlng the cart/apparatus comblnatlon to avold lnlury tram llprevel
lA Unplug thls apparatus durlng llghtnlng storms or when unused lor long penods or tlrne
15. nelerall servlclng to dualllled servlce personnel Servlclng ls redulred when the apparatus has been damaged
ln any way, such as pawersupply cord or plug ls damaged Ilquld has been spllled oroolects have rallen lnto
the apparatus. the apparatus has oeen exposed to raln or rnolsture does not operate normally, or has been dropped
ls Power source - The product should be operated only rrom the type at power source lndlcated on the marklng
lapel lf you are not sure or the type ol power supply to your home, consult your appllance dealer or local power
company For products lntended to operate tronl battery power, orother sources. relerto the operatlng
lnstructlcns
Protectthe power cord lrorn belng walked on or plnched partloularly at plugs, convenlence
l7 Power llnes 7 An outslde antenna system should not be located ln the vlclnlty ol overhead power llnes or other
electrlc llght or powerclrcults. or where lt can lall lnto such power llnes or clrcults wnen lnstalllng an outslde
antenna system, extreme care should he taken to keep lrdm touchlng such power llnes dr clrcults as contact
Wlth them rnlght oetatal.
15. Overloadlng - Dc not overload wall cutlets and extensmn cards as lllls can lesull ln (he rlsk cl llre or eleclllc shock
19 Oblecl and llquld entry 7 Never push objects 0' any klhd lnlo the product as they may much dangerous
voltage polnts or short out parts that could result ln tlre or electrlc shock. Never splll or spray any type ol llould
on the product
2d Servlce . no not attempt to seercethls product yoursell as dpenlng or removlng covers may expose you to
dangerous voltage orother hazards Relerall servlclng to oualltled serylclng personnel.
SAFETY INSTRU IONS
21 Replacement parts , When replacement parts are requlredl be sure the sennce technlclan uses replacement
parts spec-ed by the manutacturer or those that have the same characterlstlcs as the onglnal part
Unauthorlzed substltutlons may result ln re or electrlc shock or other hazards
22 Salety check , Upon completlon or any servlce or repalrs to thls product ask the service technlcran to pertorm
salety checks to determlne that the product ls ln proper operatlng condltlon
23 Damage reoulrlng servlce , Unplug the product lrorn the wall outlet and reterservrclng to qualled servrce
personnel under the lollowlng condltrons
A when the powerrsupply cord or plug rs damaged
B llllould has been spllled or amen: have lallen lnto the product
(2 llthe product has been exposed to raln or water
D llthe product does not operate normally by followlng the operatlng lnstructlons Adlust only those controls
that are covered by the operatlng Instruct-ens as lrnproper adlustrrlent may result ln damage and Wlll otten
reourre extenslve work by a oualred techniclan to restore the product to Its normal operatlon
E rt the product has been dropped or the cablnet damaged ln any way
F when the product exhlbrts a drstlnct change rn perlormanoe , thls lndloates a need torservrce
G A warnlng that ballerles (battery pack or battenes rnstalledl shall not be exposed to exoesslve heat such as
Sunshlne‘ llre orthe lrxe
CAUTION
Danger otexploslon lt battery is lncorrectly replaced.
Replace only with the same or eoulvalent type
24 The marklng lnlormatlon ls located at the bottom ol the apparatus
25 RF warnlng statement The devloe has been evaluated to meet general RF exposure redulrement The devlce
can be used tn portable exposure oondltlon Wlthout restrlctlon
Warnlng
Please reter the lnlormatlon on exterlor bottom enclosure loreleotrlcal and salety lnlormatlon belore mstalllng or
operatlng the apparatus
Caullon
1 Use of control and adlustrrlents or perlorrnance of procedures other than those specled here may result
ln hazardous radlatlon exposure
2 ll thls product develops trouble contact oualled servlce centelsl and do not use the product trt a delectlve state
Usage
1 Belore use, choose unit lnstallatton locatlon carelully Avold placlng tn dlrect sunllght orclose to a source ot
heat Also avold locatlons sublect to vloratlons and excesslve dustl cold or molsture Keep away trom sources
that hum, such as transtormers or motors
2 Do not open the cablnet as thls mlght result ln damage to the clrcultry or electncal shock ll a lorelgn dblect
should get lnto the set, contact your dealer
3 When remavrng the power plug lrom the wall outlet, always pull dlrectly on the plug never pull the bard
Do not attempt to clean the unlt wlth ohemloal solvents as thls mlght damage the nlsh Use a clean‘ dry cloth
5 ln order to shut off the power to thls product completely unplug the power cord from the wall outlet Be sure to
unplug the unlt ltyou do not tntend to use lt tor an extended perlod ot ttrne, such as whlle on vacatlon.
Keep thls manual m a sale place tor tuture reverence
at
PRODUCT SPECIFICATIONS
Blueloolh Range
Bauery Capacity
Play Time
Charging lnpui
Charging Time
Max Power Consumpkion
Power Oulput
Product Size
Included
Up lo 33 feet (10 meters)
4,400mAh LIIthm Ion (16.28Wh)
12 Hours (at 50% Volume) I 8 Hours (ak Max Volume)
DC 5V, 1.0A
6 Hours
3 Watts
5 Wafls
240mm X 240mm x 350mm
Bluetooth Speaker Cooler, User Manual.
Micro use to USB Charging Cable
NOTE: As a resuii ol cominual improvemenis, ihe design and specificalions olihis producl are
subject to change without hence.
Made in China.
BIuelooIh is a regisIered (rademark of BIueIooIh SIG, Inc.
Other Irademarks and Irade names are those 0' their respeclive owners.
BUTTONS AN CONTR
Elueloolh Speaker Cooler
warm up
Speaker Cover
, com cows
semen
muse
snnuav - r' mime.
surroN
coma
aLuEYoorH volume.
BurruN
vowER ourpur
(usa Punvurcn-vgmgl
AUXIN Powsniwur
Pom win. usa mi
NOTE: Power Output Pm should only be used for charging exiernai uss devices (EV/SODmA).
ii ine Cooier is nol useo lor an extended penoa ol‘ tune, the cover may be hard :0 open.
Simply Ilip up ihe Faouei io aiiow some air flow inio me Cooler. Use ihe Cover Grips and
roiaie counterclockwise. The Cover will loosen and become easier lo open.
GENERAL OPERATION
STANDBY BUTTON
Press and hold the STANDBY button to turn ON the unit.
Press and hold the STANDBY button again to tum OFF the unit.
bLUETOOTH BUTTON
The BLUETOOTH button functions as a PLAV/ PAUSE button.
Simply press once to pause playback, press again to resume playback.
To disconnect lrom your Bluelooth device, press and hold the BLUETOOTH button.
VOLUME CONTROL
Press the + to ralse the volume and the - button to lower the volume.
OPEN / CLOSE THE COOLER COVER
Turning the Cooler Cover clockwlse tightens / closes the Cooler.
Turning the Cooler Cover counterclockwise loosens / opens the Cooler.
Opening the Cooler Cover allows access to the liquid or contents inside.
FAUCET/ SPOUT OPERATION
Simply flip up the Faucet or push down on the Spout. Then lean the Cooler
in the direction of the Faucet or Spout until the liquid begins to pour out.
BLUETOOTH OPERATION
Connecting an External Devlce via Bluetooth:
1.Fress and hold the STANDBY button to turn ON the unit, the bluetooth
indicator will flash blue.
2. Activate the Bluetooth lunction on your external devlce.
3. Select “lTSBCJO” on your device to begin pairing. Vou will hear an audio
beep, and the sluetooth indicator will remain lit signitying your device is paired.
NOTE: in some cases, the device may ask you to input "0000" (Vour zeros)
as a password.
4. To disconnect a device, press and hold the ELUETOOTH button until the bluetooth
indicator llashes blue. Follow steps 1-3 again to pair with a new device.
NOTE: The unit can only connect with one device at atime. For proper use please
ensure that both the unit and your device are Within the standard Bluetooth
range of 33“ or turn.
AUX |N OPERATION
1. Press and hold the STANDBY button to turn ON the unit.
2. Use a 3.5mm Auxiliary Cable (not included) to connect the unit with an external
non-bluetooth audio device such as a MP3 player, MP4 player. smartphone or tablet.
3. The LED Indicator will tum GREEN to signify your audio device is connected.
4. Your audio device controls the music playback. track and Volume adjustment.
POWER BANK OPERATION
Using your device's specific charging cable [Apple' Lightning" cable, Micro use cable, etc.),
plug your smartphone, tablet or other USB powered device into the use Output Port. Vour
device will automatically begin charging. Charging will continue until your device is fully
charged or the Power Bank has drained. important: Please check Iar voltage compatibility with
your device prior to use.
BATTERY CHARGING
Recharge the internal battery by inserting the supplied Micro USB to USB
Charging Cable into the DC 5V Input port on the side of the Speaker. Connect the
USB charging Cable to a 5V 1A USB power adaptor (not supplied). The Battery
Indicator LED will turn Orange while charging. Once charging is complete the
Battery Indicator will turn Green. Charging may take up to 6 hours, depending on
the power source. NOTE: When the Speaker Cooler battery is low and needs to
be charged an audio warning will beep every 30 seconds until plugged in.
NOTE: It the unit has not been used (or a long period of time. the rechargeable
battery may be discharged into a “sleep mode". To initialize the battery, it is
recommended to charge for longer than 6 hours but DO NOT exceed 24 hours.
Battery lite will vary depending on operation. Loud music with heavy bass will
drain the battery taster than spoken word audio.
CAUTION: The built-in rechargeable battery is not replaceable. Do not remove or
replace it. do not throw in the trash or in a tire. Do not dispose device into a
standard garbage disposal site. Dispose device at available Battery Recycling
Sites after fully discharging battery. Not doing so may violate local disposal laws
and regulations. Please refer to local regulations for proper battery disposal.
TROUBLESHOOTING
If you’re experiencing problems with your unit, here are some quick and easy
checks that you can help solve the problems.
THE UNIT WILL NOT TURN ON
- Make sure the unit is fully charged.
THE UNIT WILL NOT CHARGE
- Make sure your wall outlet has proper power supply.
- Check that you are connecting the power adaptor cable into the unit correctly.
THE UNIT WILL NOT CONNECT VIA BLUETOOTH
- Make sure the Pairing Mode is enabled on your device and / or the unit.
- Disconnect your paired device and reconnect.
- Delete/forget the unit on your device's Bluetooth menu, then reconnect.
- Make sure your device and the unit are within range (33ft / 10m) of each other.
NO SOUND
- Re-connect to your device via Bluetooth or Aux-In.
- Increase the volume of the unit and / or your device.
- Make sure the battery is fully charged.
POOR SOUND QUALITY
- Bluetooth technology is sensitive to objects between your device and the unit,
ensure they are within Bluetooth range (33ft l10m) of each other.
IMP RTANTIN RMATION
WATERPROOF RESISTANCE:
The Bluetooth Speaker Cooler has a Waterprool lP><4 level ot protectrcn. vvhtch means the Speaker wtll work
ln water splashlng condttrons. such as near sprtnklers. pools or any outdoor area where splashlng may
occur Do NOT tully supmerge the Speaker lmu any hourd lt you leel the product was srgnrncantly wet,
make sure to thoroughly dry the speaker celcre use.
PLEASE NOTE: DO NoT Place or Wash Bluetooth Cooler Speaker m Dtshwasher The Cooler must be hand
washed when cleanrng Never lully submerge components or electrontc ports vvhtle cleantng and always
make sure Cooler ls thoroughly dvled when done.
Fcc statement
1 Thrs devrce compltes wtth Part to ol the FCC Rules Operatton l5 suolect to the tollovvmg two condtttons (t) Thts
devtce may not cause narmtul tnterlerence and (2t ttns devtoe must accept any rnterterence reoerved, tncludtng
tnterlerence that may cause undesrred operatton.
Z.Changes dr modthcatlons not expressly approved by the party responsible tor compltanre could votd the
user‘s authority to operate the equipment
NOTE: Thts edutpment has been tested and found to comply wtth the ltrntts tor a Class E dtgttal deytce. pursuant to
Part 15 M the FCC Rules These ltmtts are destgned to provtde reasonable protectton agamst harmful tnterlerence
ln a restdentral tnstallatton Thts eoutpment generates uses and can radtate radto lreduency energy and. It not
tnstalled and used tn accordance wtth the tnstructtons, may cause harmtul tnterterence to radto communrcattons
However. there ls no guaranteethat rnterlerence le not occur tn a partrcular lnslaHallun ll thrs equtpment does
cause harmlul tnterterenceto radrc or televtston receptton vvtnch can he determtned bylumlng the eoutpment all
and on the user l5 encouraged to try to correct the rnterlerence by one at the lollowtno measures
. Repnent or relocate the recervtng antenna
, lncreasethe separallon between the equlpmem and vecelvev
. Connect the equlpmem lmo an outlet on a ctrcutt drtlerent trom that to whtch the recelver ts connected.
- Consult the dealer or an expenenced radla/TV technlclan 70! help.
WARNING: Any changes or modtltcattons not expressly approved by the party responstple tor compltance could
Vold the user‘s authortty to operate tnts equtpment.
RF warn‘lng statement:
The devrce has been evaluated to meet general RF exposure reourrement. The devlce can be used to
portable exposure condtttdn wtthdut restrtctton
Calltornla Prop as warm;
“WARNlNG” Thls product contatns chem-cats known to the State at Cal-tornta to cause otnh detects orother
reproouctrve harm For more tntormatton on these regulattons and a ltst ot chemtcals. log on the tollowtng weostte
address: http //www.oehha.cagov/oroposhtml
NOTE: Thts user manual has provided proper tnstructtons to the users at the devtce. as well as usage restricttons.
tncludtng the ltmtts of exposure durattons. The devlce ls destgned tor rellable pertormance. and the user manual
states delalled Installa‘lons, proper opevaklons. as well as speclal usage condmons, willch comply wlth SAR and PF
field strength llmlls Users cl lhls product should cavelully study the user manual belore uslng “Us devlce
IN Dusmv CANADA:
Thts eouroment complres wtth Industry Canada ltcense eexempt ass standardts)
Operatton ls sublect to the lollowtng two condtttcns: (ll thrs devtce may not cause tnterlerence, and t2) thts devtce
must accept any tnterterence, rncludtng tnterlerence that may cause undestred operatton olthe devrce
Le present apparell est contorme aux CNR d‘lnduslvle Canada appltcaoles aux apparetls rad-o exempts oe ltcence.
L‘explolla‘lon est autorlsée aux deux condltlcns sutvantes- (t) l‘apparell ne dart pas produlve de vaulHage. et (2)
l‘mlllsateuv de l‘apparell dart accepter tout proutllage radtoelectrtdue suot. meme Sl le bvoulllage est suscepttole
d‘en compromettre le loncnonnemenl
WARRANTY
Innovative Technology Electronics LLc.
Lirriited Warranty: so nays Labor, One Year Parls
Innovative Technology Electronics LLc (lTy warrantsthe product to pe free Irom “Defects" in materials under
normal use tor a period at “One Vear" lrcm the date at the original purchase The Warranty is “Not" transIeraole IT
agrees, Within the initial “an Day" period, to repair or replace the prudud it it is determined to be defective at "NO
Charge'. It is Iunher agreed that IT Will cover the cost to repair or replace damaged “Pans“ only tor a total period oi
“One Year" Irom the date ol the original purchase The warranty does not cover cosmetic damage, antennas. Ac
cords, cabinets, headbands, eavrpads, or damage due to line power surges, connection to improper voltage supply
or settings, misuse, mishandling, accident, acts ol God or attempted repair cy an unauthorized service agent
To obtain service, the purchaser MUST present an original sales receipt / prool ol purchase. Please
ccnlact us at www. humeprnducls.cum to request an RMA (Return Material Authmilatinn) nurntier to
return Products forservice or replacement. Returns Without an RMA Ilumbel on the package Will be relused
and returned to sender. Upon receipt Oflhe returning item and ourlull inspection IIT) may issue a replacement to
customer tor the same itein or or one that has equivalent value and Ieatures. To return an item, supply Iull name,
return address, phone numoer, item purchased, receipt oi purchase and reason tor return to optain RMA number.
All returns must be in the original packaging or reasonable substitute to prevent damage. Customer "Must" include
lull name, shipping address and telephone numper inside ol package NO return Will he shipped back to a PO BOX
or APO address
Please include your check or money order in the amount at:
' USDSSDD '0’ Items $10.00 ta $39.99 (Price Paid Per Unlk)
-USD$10.00 lor erns $40.00 Io $99.99. (Price P Per u
-USD$16.0U, tor items $100.00 and up. (Price Paid Per Unit)
- Shipping lees are non-relundatile
to be payable to Innovative Technology Electronics LLC (Ior handling and return stripping ohargesl IIT) Will not he
responsibleiordelays orunprocessed claims resulting lrcm a purchaser's Iailure to provide any/ all or the
necessary inlormation Send all inquiries or RMA request via our weosite www.ithonreproducts.corn/supporl.
Innovative Technology Electronics LLC.
l Channel Drive
Port Washington, NV Ilosu
Toll Iree lemmaaezow
Website for support: www.ithorneproductscom/support
There are no express warranties except as listed above
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTv IS THE EXCLUSIVE REMEDv OF THE
CUSTOMER, IIT) SHALL NOT BE LIARLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH
OF ANV EXPRESS OR IMPLIED WARRANTV ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BV
APPLICABLE LAw ANY IMPLIED WARRANTV OF MERCHANTABIUTY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION To THE DURATION OF THIS WARRANTV.
Some states do not allow the exclusion or limitation or incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you
specitic legal rights and you may also have other rights, which vary from state to state.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2017:04:18 13:45:19-04:00
Creator                         : Adobe Illustrator CC 2017 (Macintosh)
Modify Date                     : 2017:04:18 13:45:44-04:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : ITBSC-10-Manual-041817-lores
Metadata Date                   : 2017:04:18 13:45:44-04:00
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Thumbnail Width                 : 244
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19831 bytes, use -b option to extract)
Instance ID                     : uuid:603af881-7fe8-7348-bb0a-68cbe0e63f7d
Document ID                     : xmp.did:301dbfbc-1f8f-4e59-877d-619a1ca09ef0
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:a8cf9dc4-aea5-6149-9ef5-774003a6f5bc
Derived From Document ID        : xmp.did:8b371d9b-cc7a-4d8a-b7b4-b29cac5342fb
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:8267ccc4-7a0a-41d2-ab2d-a356b5c37fc5, xmp.iid:301dbfbc-1f8f-4e59-877d-619a1ca09ef0
History When                    : 2017:04:07 15:01-04:00, 2017:04:18 13:45:13-04:00
History Software Agent          : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Users/design1/Graphic Design/Packaging/ITSBC-10/MANUAL/ITSBC-10-Manual.jpg
Manifest Reference Document ID  : xmp.did:294d896a-d4d0-4a11-96b6-0f9b50d9f1b1
Manifest Reference Instance ID  : xmp.iid:b85f3cf1-9468-4269-a93b-3261f9a38edc
Ingredients File Path           : /Users/design1/Graphic Design/Packaging/ITSBC-10/MANUAL/ITSBC-10-Manual.jpg
Ingredients Document ID         : xmp.did:294d896a-d4d0-4a11-96b6-0f9b50d9f1b1
Ingredients Instance ID         : xmp.iid:b85f3cf1-9468-4269-a93b-3261f9a38edc
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 5.830000
Max Page Size H                 : 8.267778
Max Page Size Unit              : Inches
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Creator Version                 : 21.0.2
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AFHW-SBC10

Navigation menu