Inrico Technologies T320 Intelligent Two Way Radio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3797510
Application ID	e4rmdFXaQwvuj5fROtLgtg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.55kB (319416 bits)
Date Submitted	2018-03-27 00:00:00
Date Available	2018-03-27 00:00:00
Creation Date	2017-12-13 13:55:54
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2018-03-23 17:45:21
Document Title	T320 中性说明书 中英双语）
Document Creator	CorelDRAW
Document Author:	hongsu

感谢您选购我们的对讲机
MOBILE PUBLIC NETWORK RADIOS
USER'S MANUAL
使用说明书
无线公网对讲机
Thank you for choosing our two-way radios.
Radio Overview
Notes before using：
Do not use the walkie talkie in an explosive environment
(such as gas, dust, steam, etc.) or to charge the batter y.
Please turn off the walkie-talkie while refueling or parking
at the gas station.
Do not adapt or modify the machine whether there is any
reason.
Do not let the walkie talkie by prolonged direct sunlight,
do not place it near a heating appliance too.
Do not put the walkie talkie at the extremely dusty, damp
and splashing place and do not place it on an unstable
surface.
The repair of the walkie talkie only can be carried out by
professional technicians, do not disassemble by yourself.
Antenna
Vol/Channel knob
Status indicator lamp
Receiver
Front camera
Touch screen
Note：
Please read above content carefully. It is ver y important
for walkie talkie users to gain general knowledge and
understanding of risk about the use of walkie talkie.
Keyboard
ABC
DEF
GHL
JKL
MNO
PQRS
TUV
WXYZ
Primary microphone
Lanyard hole
Denoise
Rear camera
Belt clip
Battery cover
This guide is for reference only. Commitment does not
constituted any form of ,and products to prevail in kind.
Battery latch
English
Accessory Installation
To insert a SIM card
SIM1
SIM2
Screw hole
USB port
PTT
Earphone/MIC interface
PPT
Photo
To insert a SD card
SOS
SIM1
SIM2
English
English
3
To install the battery
（a）Insert the battery to connect with the metal at the bottom
of the tank;
（b）Press down on the other end of the battery.
Install the belt clip
（a）The belt clip should be aligned with the back screw hole
（b）Install the belt clip by rotating screw
Uninstall the belt clip
Uninstall the belt clip by rotating screw until loose
SIM1
SIM2
Belt clip
Close the battery cover:
(a) Push the battery cover until it clicks into place;
(b) Push the battery cover down;
(c) Press battery latch.
Open the battery cover: pull battery latch, and then open
the battery cover
Install Lanyard
Install lanyard through attachment points on belt clip.
SIM1
SIM2
latch
English
English
7
Remove hand-held mic cover :Loosen the screw by
rotating, and then remove the cover.
Install hand-held mic cover： Hand-held mic cover should
be aligned with card slot, and press into the screw hole to
rotate tightly.
Screw
Attach/Remove the Antenna
Screw the antenna in to the connector on the top of radio
by holding the antenna at its base and turn the antenna
clockwise to fasten it.
Turn the antenna counter-clockwise until you can remove
it.
(Note:The antenna is neither a handle, a key ring retainer, nor a speaker/ microphone attachment
point. Using the antenna in these ways may damage the antenna and degrade your transceiver's
performance)
Antenna
Antenna
Basic functions
Initial start
Make sure whether the batter y is well installed.
Power : Press and hold the hook key button until the boot
screen appears on the display. If SIM cards have PIN code
protection, please enter your PIN code. The initial
password PIN code is generally 1234.
Unlock screen
Short press the End key to lock the screen.
Short press again the power button to wake up the screen
hook .
Slide to unlock icon in any direction, unlock the screen to
enter the standby interface.
System prompts
Ways to turn on the prompt bar :
Press and hold the top of the screen with a finger status
bar, grabbed the pop-up drop-down box and drag down to
open the prompt line.Prompted bar displays the current
open applications, click on a running list of fields, you can
quickly switch to the corresponding application.
Tips: When you turn on airplane mode, you can not make a
call.In addition, the system prompts bar also displays the
current system of notification (such as unread messages,
missed calls, etc.), as well as applications running.Click on
icon to view the list of icons, click to quickly open the
corresponding function.
Personalized Settings
In the empty space of the main screen press and access
p e r s o n a l i z e d s e t t i n g s i n t e r f a c e . I n Pe r s o n a l i z a t i o n
interface, you can set the wallpaper, add widgets, and
system settings.
Move and delete icons
Long press screen menu or widget icon to move or delete
the corresponding icon.
Restore the factor y settings
Select "Backup & reset" in the setup menu can restore the
factor y settings.
Warning: restore factor y settings on your phone will reset to its original
factor y state,That clearing system, applications, data and settings,
including downloaded applications.
English
ABC
DEF
ABC
DEF
GHL
JKL
MNO
GHL
JKL
MNO
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
English
Function introduction
Dial
Menu option at the bottom of screen allows you to access
to phone records, digital dial pad, call settings quickly.
Contacts
Users can call friends and colleagues conveniently, send
emails and messages quickly. Contacts can be added
directly on the phone or synchronized from applications
on the computer.
Message
To click message icon to enter message interface,
messages received will be showed on list, which can be
edited,sent and deleted.
Settings
To set radios as required, including wireless and networks,
p r o f i l e s , d i s p l a y, s t o r a g e , b a t t e r y i n f o r m a t i o n ,
applications, location information, security, languages,
input methods, backup ,reset, account added , date and
time, accessibility, printing, about mobile phone, etc.
Key Description:
OK button:
Double-press to unlock
Short-press to confirm
Direction key: Optional
Function
Left key:
choose function menu
Right key:
return to main menu and
exit the program
Left Dial key:
access to the dial-up interface
* key: punctuation
English
ABC
DEF
GHL
JKL
MNO
PQRS
TUV
WXYZ
Right Power key:
long press(more than 2s)
to Startup or Turnoff.
short press to standby.
Video
Users can watch recorded videos or video files
downloaded to the radio, as well as to edit or share videos.
Galler y
Users can browse pictures, photo, video files saved in the
radio, as well as click on photo icons to enter photo
interface quickly.
File management
Files stored locally on the phone or on the memor y card
can be viewed and managed.
Camera
Camera can be used to take photos or videos, and
different models can be set, such as exposure control,
color effect, framing mode, face detection, burst mode,
etc. According to personal preference or shooting
environment, related settings can be available for best
shooting effect. After taking photos or videos, users can
have a check .
Calculator
Simple arithmetic operations and a variety of
mathematical operations can be carried out by calculator.
Music
Click into the music list interface, to provide you with the
artists, albums, songs and play lists four kinds of music
mode selection arrangement. Click on the name of the
music directly to the music player interface.
Intercom
Enter user name / password to login
（ the way of details login see remarks-public network
intercom description）
Number keys
#key:
switch input method
English
Security information
Before using the device operation, please read and
obser ve the following precautions to ensure optimum
device per formance,and avoid dangerous or illegal
situations.
Electronic equipment
The place of civilization provisions that has prohibited the
use of wireless devices,don’t use the device,other wise it
will lead to interference from other electronic devices or
other hazards.
Area with easy firing and explosion
Refueling point (ser vice station)or near inflammable and
explosive materials,flammable and explosive chemical
agents in any area, and don’t use the device, the device
may cause an explosion or fire.
Operating environment
Don’t use the device in dusty, wet, dirty, or near
magnetic fields, so as to avoid internal circuit equipment
failure.
Don’t use this device in a thunderstorm, thunderstorms
could result in equipment malfunction or shock hazard.
Don’t place in direct sunlight for too long time.
Please avoid equipment and accessories to rain or
moisture, other wise it may be caused a fire or electric
shock .
Don’t place the device near a heat source or exposed
flame sources, such as electric heaters, microwave, oven,
water heater, fire, candles or other places may high
temperatures.
Accessories requirement
Don’t use unapproved or incompatible power supply,
batter y charger, other wise, it may result in a fire, explosion
or other hazard.
O n l y u s e m a n u f a c t u r e r- a p p r o v e d e q u i p m e n t a n d
equipment accessories for this model,if you use other
types of accessories,it will be lead to accidental damage to
the equipment, breach of warranty of the equipment.
The charger security
When fully charged or not charged, please disconnect the
charger from the device and unplug the charger from the
power outlet.
Don’t drop or bump the charger,if the charger is
damaged,don’t continue to use, to avoid accidents.
Don’t touch the device and charger with wet hands to
avoid short-circuiting device, malfunction or electric
shock .
English
Batter y Safe
Don’t use the metal objects with two poles of the batter y
to docking, or contact with the endpoint of the batter y, to
avoid the batter y short circuit,
as well as damage caused by batter y overheating.
Don’t expose the batter y to high temperature or fever
around the device, and batter y overheating may cause an
explosion.
Don’t disassemble or modify the batter y, insert foreign
objects or liquid intrusion, in order to avoid batter y
leakage, overheating, causing a fire or explosion.
If a batter y leaks, don’t contact with skin or eyes. If
contact, immediately rinse with water and go to hospital
for medical treatment.
If the batter y is in the process ofusing, charging or saving,
which havediscoloration, deformation, abnormal heating
phenomenon,please stop using and replace with new
batter y.
Don’t throw batteries in a fire, other wise it will cause fire
and explosion.
Don’t let children touch the batter y, to avoid accidents.
Don’t use a damaged batter y.
When the standby time of the device is significantly
shorter than normal, please replace the batter y.
Dispose of batteries according to local regulations,not
dispose as household waste.
Care and Cleaning
Do not lift up antenna or an external microphone directly.
Please use lint-free cloth to remove dust and stains from a
radio to avoid poor contact.
Please place the cover on headphone jacks when not in
use .
The keypad and sensors should be cleaned carefully with a
lint-free cloth moistened with clean water and a mild
washing liquid.Do not use strong corrosive solvents for
cleaning.
English
FCC RF Exposure Information and Statement
This device meets the government's requirements for exposure to radio waves. The guidelines are based
on standards that were developed by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of
all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Device
types: Intelligent Two Way Radio (FCC ID: 2AIV6-T320) has also been tested against this SAR limit. SAR
information on this and other pad can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the
device FCC ID number for search. This device was tested simulation typical 10 mm to body. To maintain
compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between
the user's bodies mentioned above, the use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE 3: Only the antenna supplied by the manufacture is permitted to use with this device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : hongsu
Create Date                     : 2017:12:13 13:55:54+08:00
Modify Date                     : 2018:03:23 17:45:21+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : hongsu
Title                           : T320 中性说明书 中英双语）
Creator Tool                    : CorelDRAW
Metadata Date                   : 2018:03:23 17:45:21+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:bc1ae8de-67e1-4895-8b9f-6dde842c60de
Instance ID                     : uuid:fa2955a2-df57-4649-836d-52fb387cd62b
Page Count                      : 8

EXIF Metadata provided by EXIF.tools