Insight SiP ISP1302 Bluetooth Low Energy Module User Manual Revised

Insight SiP Bluetooth Low Energy Module Users Manual Revised

Users Manual Revised

Preliminary Data Sheet June 16, 2016 Page 1/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. ISP1302 Featured Bluetooth Low Energy Module with MCU and Antenna This ultra-small LGA module, 8 x 8 x 1 mm, is based on the nRF51822 Chip. Its powerful Cortex™ M0 CPU, flash and RAM memory combined with an optimized antenna offers the perfect solution for Bluetooth connectivity. The solution is best in class for RF performance and low power consumption. Multiple digital and analogue interfaces give optimum flexibility for sensor integration. Key Features Single Mode BLE V4.1 IPv6 Connectivity Based on Nordic Semiconductor nRF51 2.4GHz low energy RF Transceiver 32bit ARM Cortex M0 CPU 128 kB Flash 16 kB SRAM 16 GPIOs including 5 ADC inputs & 1 ADC reference Ultra Low Power Consumption Single 1.8 to 3.6 V supply Very small size 8.0 x 8.0 x 1.0 mm Temperature -40 to +85 °C Fully integrated RF matching and Antenna Integrated 16 MHz Clock Possibility to connect external 32.768 kHz Possibility to enable DC-DC converter by adding external passive components Applications High volume BLE applications Connected sensors for medical devices, healthcare, sport, fitness, industrial … IoT applications, connected objects Wearable technology Home automation Beacons Certifications Complies with FCC – pending certification Complies with CE – pending certification Complies with IC – pending certification Bluetooth SIG – pending certification RoHS compliant
Preliminary Data Sheet June 16, 2016 Page 2/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 Contents 1. Block Diagram ............................................................................................................................................................ 3 2. Specifications ............................................................................................................................................................. 4 2.1. Absolute Maximum Ratings ........................................................................................................................... 4 2.2. Operating Conditions ..................................................................................................................................... 4 2.3. Power Consumption ...................................................................................................................................... 5 2.4. Clock Sources ............................................................................................................................................... 5 2.5. Radio Specifications ...................................................................................................................................... 5 2.6. Electrical Schematic ...................................................................................................................................... 8 3. Pin Description ........................................................................................................................................................... 9 3.1. Pin Assignment ............................................................................................................................................. 9 3.2. Pin Correspondence Table .......................................................................................................................... 10 4. Mechanical Outlines ................................................................................................................................................ 11 4.1. Mechanical Dimensions .............................................................................................................................. 11 4.2. SMT Assembly Guidelines .......................................................................................................................... 12 4.3. Antenna Keep-Out Zone ............................................................................................................................. 12 5. Product Development Tools .................................................................................................................................. 13 5.1. Hardware ..................................................................................................................................................... 13 5.2. Firmware ...................................................................................................................................................... 13 5.3. Development Tools ..................................................................................................................................... 14 6. Reference Designs .................................................................................................................................................. 15 6.1. Sensor Board Design .................................................................................................................................. 15 6.2. Beacon Design ............................................................................................................................................ 16 7. Packaging & Ordering information ....................................................................................................................... 17 7.1. Marking ........................................................................................................................................................ 17 7.2. Prototype Packaging ................................................................................................................................... 17 7.3. Jedec Trays ................................................................................................................................................. 17 7.4. Tape and Reel ............................................................................................................................................. 18 7.5. Ordering Information ................................................................................................................................... 18 8. Storage & Soldering information .......................................................................................................................... 19 8.1. Storage and Handling .................................................................................................................................. 19 8.2. Moisture Sensitivity ..................................................................................................................................... 19 8.3. Soldering information .................................................................................................................................. 20 9. Quality & User information..................................................................................................................................... 21 9.1. Certifications ................................................................................................................................................ 21 9.2. USA – User information ............................................................................................................................... 21 9.3. Canada – User Information ......................................................................................................................... 21 9.4. Discontinuity ................................................................................................................................................ 22 9.5. Disclaimer .................................................................................................................................................... 22
Preliminary Data Sheet June 16, 2016 Page 3/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 1. Block Diagram This module is based on nRF51822 Nordic Semiconductor 2.4GHz wireless System on Chip (SoC) integrating a 2.4 GHz transceiver, a 32-bit ARM Cortex™-M0 CPU, a flash memory, a RAM and analog and digital peripherals. It can support BLE and a range of proprietary 2.4 GHz protocols, such as Gazell from Nordic Semiconductor. The ANT protocol can be handled on request. Fully qualified BLE stacks for nRF51822 are implemented in the S100 series of SoftDevices which can be freely downloaded. ISP1302 can then be used in Central, Peripheral or both roles for BLE and for both ends of other proprietary protocols. Ultra low power consumption and advanced power management enables battery lifetimes up to several years on a coin cell battery. Even though its very small size 8 x 8 x 1mm, the module integrates decoupling capacitors, 16 MHz crystal, RF matching circuit and antenna in addition to the wireless SoC. It is also possible to connect external DC-DC converter passive components and 32 kHz crystal. Only the addition of a suitable DC power source is necessary for BLE connectivity. Sensor applications require the further addition of appropriate sensors. The antenna was designed to be optimized with several standard ground plane sizes.
Preliminary Data Sheet June 16, 2016 Page 4/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 2. Specifications The specifications of the module follow those of the nRF51. The following high level parameters are given for the module. 2.1. Absolute Maximum Ratings Parameter Min Typ Max Unit Supply Voltage respect to ground - VCC -0.3 3.9 V IO Pin Voltage -0.3 VCC + 0.3 V Storage Temperature -40 +125 °C Moisture Sensitivity Level 5 - ESD Human Body Model 4000 V ESD Charged Device Model 500 V Flash Endurance 20000 cycles ATTENTION CONSERVE PRECAUTION FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 2.2. Operating Conditions Parameter Min Typ Max Unit Operating Supply Voltage, internal LDO setup 1.8 (1) 1.9 (2) 3.0 3.6 V Operating Supply Voltage, DCDC converter setup 2.1 3.0 3.6 V Extended Industrial Operating Temperature Range -40 +25 +85 °C (1) Minimum Supply Voltage Specification for Standard Operating Temperature Range -25°C to +75°C only (2) Minimum Supply Voltage Specification for Extended Industrial Operating Temperature Range -40°C to +85°C
Preliminary Data Sheet June 16, 2016 Page 5/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 2.3. Power Consumption Parameter Min Typ Max Unit Peak current, Receiver active (supply at 2.1V) 12.6 mA Peak current, Transmitter active +4 dBm Output Power 16 mA Peak current, Transmitter active 0 dBm Output Power 10.5 mA Current drain, Connection-less state, no RAM retention 0.6 µA Current drain, Between connection events 2.6 µA 2.4. Clock Sources Parameter Min Typ Max Unit Internal High Frequency Clock for RF Stability: 16 MHz Crystal Frequency Tolerance (1) +/- 40 ppm Internal Low Frequency Clock for BLE Synchronization: RC Oscillator (2) +/- 250 ppm RF Frequency tolerance: For BLE operation Channels 0 to 39 +/- 40 ppm (1) including initial tolerance, drift, aging, and frequency pulling (2) with calibration interval of 4 sec 2.5. Radio Specifications Parameter Min Typ Max Unit Frequency Range 2402 2480 Mhz Channel 0 to 39 Spacing 2 Mhz Output Power Channels 0 to 39 -20 +4 dBm Rx sensitivity Level for BER <0,1% ideal Tx -93 dBm Antenna Gain 0.6 dBi EIRP -19.4 4.6 dBm Range Open field @1m height 100 m Data Rate 250 / 1000 / 2000 kbps
Preliminary Data Sheet June 16, 2016 Page 6/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 Typical Antenna Return Loss Module mounted on a USB dongle ground plane Radiation Pattern in 3 planes Module mounted on a USB dongle ground plane Gain measurement in dBi @ 2.45 GHz
Preliminary Data Sheet June 16, 2016 Page 7/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 Ground Plane Effect Simulation USB dongle ground plane (size : 18 x 30 mm²) Cell phone config 1 ground plane (size : 40 x 100 mm²) Cell phone config 1 with side ground plane (size : 40 x 100 mm²) Cell phone config 2 with side ground plane (size : 40 x 100 mm²) Cell phone config 3 with side ground plane (size : 40 x 100 mm²)
Preliminary Data Sheet June 16, 2016 Page 8/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 2.6. Electrical Schematic Electrical schematic showing ISP1302 module connections
Preliminary Data Sheet June 16, 2016 Page 9/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 3. Pin Description 3.1. Pin Assignment The module uses an LGA format with pads on a 0.65 mm pitch. The pad layout follows the QFN Jedec standard for LGA parts. The NC pads are to be connected to isolated metal pads on the application PCB for mechanical stability and reliability (drop test). Pin Name Pin function Description 1 VSS Ground Should be connected to ground plane on application PCB 2 IO_00 Digital I/O General purpose I/O pin 3 IO_01 Digital I/O General purpose I/O pin 4 IO_02 Digital I/O General purpose I/O pin 5 VSS Ground Should be connected to ground plane on application PCB 6 OUT_ANT Antenna I/O This pin is connected to the internal antenna It should be connected to Pin 7 OUT_MOD for normal operation 7 OUT_MOD Antenna I/O This pin is the RF I/O pin of the BLE module It should be connected to Pin 6 OUT_ANT for normal operation 8 VSS Ground Should be connected to ground plane on application PCB 9 AVDD Power Should be connected to VCC in LDO mode, to 1.8V in low voltage mode; or should be connected to Pin 24 DCC through loading inductors and capacitors in DC/DC mode 10 IO_03 Digital I/O General purpose I/O pin 11 IO_04 Digital I/O General purpose I/O pin 12 IO_05 Digital I/O General purpose I/O pin 13 IO_06 Digital I/O General purpose I/O pin 14 IO_07 Digital I/O General purpose I/O pin 15 VSS Ground Should be connected to ground plane on application PCB 16 SWDIO-nRESET Digital I/O System reset (active low). Also HW debug and flash programming I/O 17 IO_08 Digital I/O General purpose I/O pin 18 SWDCLK Digital Input HW debug and flash programming I/O 19 VSS Ground Should be connected to ground plane on application PCB 20 IO_09 ADC_0 Digital I/O Analog input General purpose I/O pin ADC input 21 IO_10 ADC_1 Digital I/O Analog input General purpose I/O pin ADC input 22 IO_11 ADC_2 Digital I/O Analog input General purpose I/O pin ADC input 23 IO_12 AREF_0 Digital I/O Analog input General purpose I/O pin ADC Reference voltage 24 DCC Power Should not be connected in LDO or low voltage mode Should be connected to Pin 9 AVDD through loading inductors and capacitors in DC/DC mode 25 VCC_nRF Power Power supply (1.8 – 3.6V). 26 IO_13 ADC_3 XL_1 Digital I/O Analog input Analog input General purpose I/O pin ADC input Crystal connection for 32.768 kHz crystal oscillator or external 32.768 kHz crystal reference
Preliminary Data Sheet June 16, 2016 Page 10/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 31 383736353433322930 394051511923418171667 8 9 10 11 12 13 1428 27 26 25 24 23 22 21 20Pin Name Pin function Description 27 IO_14 Digital I/O General purpose I/O pin 28 IO_15 ADC_4 XL_2 Digital I/O Analog input Analog input General purpose I/O pin ADC input Crystal connection for 32.768 kHz crystal oscillator 29 to 40 NC Not Connected Isolated pad for mechanical stability Do not connect ISP1302pad placement and pin assignment for the LGA QFN package TOP VIEW 3.2. Pin Correspondence Table This table gives correspondence between physical module pins and physical nRF51 pins. ISP1302 pin nRF51 pin IO_00 P0_24 IO_01 P0_21 IO_02 P0_22 IO_03 P0_25 IO_04 P0_29 IO_05 P0_19 IO_06 P0_15 IO_07 P0_20 IO_08 P0_12 IO_09 / ADC_0 P0_06_AIN7 IO_10 / ADC_1 P0_03_AIN4 IO_11 / ADC_2 P0_02_AIN3 IO_12 / AREF_0 P0_00_AREF0 IO_13 / ADC_3 / XL_1 P0_27_AIN1_XL1 IO_14 P0_23 IO_15 / ADC_4 / XL_2 P0_26_AIN0_XL2
Preliminary Data Sheet June 16, 2016 Page 11/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 4. Mechanical Outlines 4.1. Mechanical Dimensions Dimensional drawing for 8 x 8 x 1 mm, 40-Pad LGA Package. All dimensions in mm. TOP VIEW 0.800.800.400.7010.450.502.702.051.403.603.655.106.107.507.558.000.100.450.50 1.402.05 0.250.308.001.502.500.600.40
Preliminary Data Sheet June 16, 2016 Page 12/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 4.2. SMT Assembly Guidelines For PCB Land Patterns and Solder Mask layout, Insight SiP recommends to use the same dimensions as module pads, ie 0.4 x 0.7 mm for standard pads and 0.8 x 0.8 mm for corner pads. Please contact Insight SiP for more detailed information. 4.3. Antenna Keep-Out Zone For optimal antenna performance, it is recommended to respect a metal exclusion zone to the edge of the board: no metal, no traces and no components on any application PCB layer except mechanical LGA pads. Application PCBKeep-out zone118.0 mm min4.5 mm
Preliminary Data Sheet June 16, 2016 Page 13/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 5. Product Development Tools 5.1. Hardware In order to assist clients in developing their Bluetooth Smart solutions based on the ISP1302, Insight SIP offers a Development Kit containing: - One Interface Board - J-Link Lite CortexM-9 JTAG/SWD Emulator - One Test Board - One Sensors Board - A Development Dongle - 5 ISP1302 module samples - Cables, power supply and coin battery holder Using this development kit, product developers can use a working solution as starting point to develop their own products. Time to market is saved by avoiding starting from a blank sheet of paper. In addition, there may be some applications that use the hardware as is. Please refer to the documentation for more information: http://www.insightsip.com/fichiers_insightsip/pdf/ble/isp_ble_DS1302_DK.pdf 5.2. Firmware ISP1302 supports Bluetooth Low Energy protocol stacks as well as 2.4 GHz protocol stacks, including Gazell, both available as downloads. If ANT protocol is selected as an option, specific ANT protocol stacks are also available as download at www.nordicsemi.com. The S110 SoftDevice is a Bluetooth Low Energy peripheral / broadcaster protocol stack solution. It integrates a Bluetooth Smart controller and host, and provides a full and flexible API for building Bluetooth Smart solutions: The S120 SoftDevice is a Bluetooth low energy central protocol stack solution supporting up to eight simultaneous Central role connections. It integrates a Bluetooth controller and host, and provides a full and flexible API for building Bluetooth Smart solutions. The S130 SoftDevice is a Bluetooth low energy concurrent multi-link protocol stack solution supporting simultaneous Central / Peripheral / Broadcaster / Observer role connections. It integrates a Bluetooth Smart controller and host, and provides a full and flexible API for building Bluetooth Smart solutions. The S210 SoftDevice is an ANT protocol stack solution that provides a full, flexible application programming interface (API) for building ANT solutions for Nordic Semiconductor nRF51 ICs. S210 SoftDevice reduces the need for a secondary application host MCU to ANT solutions.
Preliminary Data Sheet June 16, 2016 Page 14/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 The S310 SoftDevice is an ANT and Bluetooth low energy peripheral controller and hosts a multiprotocol stack that provides a full, flexible application programming interface (API) for building concurrent ANT and Bluetooth Smart solutions for the nRF51422 IC. The S310 SoftDevice reduces the need for a secondary application host MCU as well as the need for an added device to support concurrent multiprotocol. 5.3. Development Tools The following development tools and software are recommended for using and testing ISP1302 module: Nordic Semiconductor nRFgo Studio: Downloadable after registering at www.nordicsemi.com. Nordic Semiconductor Master Control Panel: Downloadable after registering at www.nordicsemi.com. Keil MDK-ARM Lite: Downloadable from https://www.keil.com/demo/eval/arm.htm. Segger J-Link Lite: Downloadable from http://www.segger.com/jlink-software.html. nRF51 Software Development Kit (SDK): nRF51 SDK can be downloaded after registering at www.nordicsemi.com. It contains example of source codes applications (C language): - Precompiled HEX files - Source code - Keil ARM project files - IAR project files - GCC project files
Preliminary Data Sheet June 16, 2016 Page 15/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 6. Reference Designs 6.1. Sensor Board Design Sensor Board is an autonomous low-power device for wireless acceleration, temperature and barometer detection and transmission. The complete device makes use of Insight SiP ISP1302 BLE module together with low power 3-axis accelerometer and temperature/barometer sensors connected to a primary button cell battery. The Freescale FXOS8700CQ 3-axis linear accelerometer and 3-axis magnetometer is used to detect acceleration and is combined with ST Micro LPS331AP temperature and barometer sensor. A Rohm SML-P11MTT86 mini-LED is also part of the board and is available to be controlled by software. Data are transmitted via GPIO processor port.
Preliminary Data Sheet June 16, 2016 Page 16/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 6.2. Beacon Design Beacon board is an autonomous low-power device for wireless detection and transmission. The complete device makes use of Insight SiP ISP1302 BLE module together with low power host processor and small primary button cell battery. It has been developed to explore the full range of development possibilities for beacons using Bluetooth Smart technology. They allow indoor positioning, letting your phone know that you are in range of a beacon. As the “beacon” name suggests, they transmit packets of data in regular intervals, and this data can be then picked up by devices like smartphones. The two buttons can be programmed to enable easy switching between modes and/or functionality. As well an RGB-LED can be configured to indicate different events.
Preliminary Data Sheet June 16, 2016 Page 17/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 7. Packaging & Ordering information 7.1. Marking ISP1302 Part Number TT 2 letters Module Type (see section 7.5) YY 2 digits year number WW 2 digits week number R 1 letter Hardware revision 7.2. Prototype Packaging For engineering samples and prototype quantities up to 99 units, deliveries are provided in thermoformed trays. Please order with “ST” code packaging suffix. These parts must be backed prior to assembly (see section 8.2). CAUTION MOISTURE SENSITIVE DEVICES 7.3. Jedec Trays For pre-production volumes, ISP1302 are available in Jedec trays. They are delivered in sealed pack with desiccant pack and humidity sensors. These Jedec trays are also suitable for further baking. Please see section 8.2 for more information on moisture sensitivity. Jedec trays are proposed in standard quantities of 100 units only. Please order with “J1” code packaging suffix. Complete information on Jedec trays is available on request. M /N : I S P 1 3 0 2 T T Y Y W W R LEVEL5
Preliminary Data Sheet June 16, 2016 Page 18/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 7.4. Tape and Reel ISP1302 are also available in Tape & Reel. They are delivered in sealed pack with desiccant pack and humidity sensors. Reels are proposed in standard quantities of 2000 units (330mm / 13” reel) only. Please order with “R2” code packaging suffix. Complete information is available on request. 7.5. Ordering Information I S P 1 3 0 2 - T T - Z Z ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ I S P 1 3 0 2 Part Number - B BLE protocol type - S 128 kB Flash / 16 kB RAM memory type - D K Development kit (1) - T B Test board (1) - S T Unsealed Tray Packaging - J 1 Jedec Tray of 100 units - R 2 Reel of 2000 units (1) Please see section 5.1 and refer to the following documentation for more information on development kit and test board: http://www.insightsip.com/fichiers_insightsip/pdf/ble/isp_ble_PS1302_DK.pdf
Preliminary Data Sheet June 16, 2016 Page 19/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 8. Storage & Soldering information 8.1. Storage and Handling Keep this product away from other high frequency devices which may interfere with operation such as other transmitters and devices generating high frequencies. Do not expose the module to the following conditions: - Corrosive gasses such as Cl2, H2S, NH3, SO2, or NOX - Extreme humidity or salty air - Prolonged exposure to direct Sunlight - Temperatures beyond those specified for storage Do not apply mechanical stress Do not drop or shock the module Avoid static electricity, ESD and high voltage as these may damage the module ATTENTION CONSERVE PRECAUTION FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 8.2. Moisture Sensitivity All plastic packages absorb moisture. During typical solder reflow operations when SMDs are mounted onto a PCB, the entire PCB and device population are exposed to a rapid change in ambient temperature. Any absorbed moisture is quickly turned into superheated steam. This sudden change in vapor pressure can cause the package to swell. If the pressure exerted exceeds the flexural strength of the plastic mold compound, then it is possible to crack the package. Even if the package does not crack, interfacial delamination can occur. Since the device package is sensitive to moisture absorption, it is recommended to bake the product before assembly. The baking process for dry packing is 24 hours at 125°C. ISP1302 has been tested MSL-5 according to standards. After baking, modules can be exposed to ambient room conditions (approximately 30 °C/60%RH) during 48 hours before assembly on the PCB. CAUTION MOISTURE SENSITIVE DEVICES LEVEL5
Preliminary Data Sheet June 16, 2016 Page 20/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 8.3. Soldering information Recommendation for RoHS reflow process is according to Jedec J–STD-020 and 033 standard profiles. Preheat/Soak Temperature Min (Tsmin) Temperature Max (Tsmax) Time (ts) from (Tsmin to Tsmax) 150 °C 200 °C 60-120 sec Peak package body temperature (Tp) 260°C (+0/-5°C) Classification Temperature (Tc) Time (tp) maintained above TC-5 °C 260 °C 30 sec Ramp-up rate (TL to Tp) 3 °C/sec max Ramp-down rate (Tp to TL) 6 °C/sec max Liquidous temperature (TL) Time (tL) maintained above TL 217 °C 60-150 sec Time 25 °C to peak temperature 8 mn max
Preliminary Data Sheet June 16, 2016 Page 21/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 9. Quality & User information 9.1. Certifications FCC – Certification pending CE – Certification pending IC – Certification pending Bluetooth SIG – Certification pending RoHS compliant 9.2. USA – User information This intends to inform how to specify the FCC ID of our module “ISP1302” on the product. Based on the Public Notice from FCC, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains FCC ID: 2AAQS-ISP1302” Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below FCC Statement. When it is not possible, this information should be included in the User Manual of the host device: “This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” 9.3. Canada – User Information This intends to inform how to specify the IC ID of our module “ISP1302” on the product. According to Canadian standards “RSS-210” and “RSS-Gen”, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains IC: 11306A-ISP1302” Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below IC Statement. When it is not possible, this information should be included in the User Manual of the host device:
Preliminary Data Sheet June 16, 2016 Page 22/22 Document Ref: isp_ble_DS1302_R1.docx Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com The information contained in this document is the property of Insight SiP and should not be disclosed to any third party without written permission. Specification subject to change without notice. BLE MODULE ISP1302 “This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.” 9.4. Discontinuity Normally a product will continue to be manufactured as long as all of the following are true: - The manufacturing method is still available. - There are no replacement products. - There is demand for it in the market. In case of obsolescence, Insight SiP will follow Jedec Standard JSD-48. A Product Discontinuation Notice (PDN) will be sent to all distributors and made available on our website. After this, the procedure goes as follows: - Last Order Date will be 6 months after the PDN was published. - Last Shipment Date will be 6 months after Last Order Date, i.e. 12 months after PDN. 9.5. Disclaimer Insight SiP’s products are designed and manufactured for general consumer applications, so testing and use of the product shall be conducted at customer’s own risk and responsibility. Please conduct validation and verification and sufficient reliability evaluation of the products in actual condition of mounting and operating environment before commercial shipment of the equipment. Please also pay attention (i) to apply soldering method that don’t deteriorate reliability, (ii) to minimize any mechanical vibration, shock, exposure to any static electricity, (iii) not to overstress the product during and after the soldering process. The products are not designed for use in any application which requires especially high reliability where malfunction of these products can reasonably be expected to result in personal injury or damage to the third party's life, body or property, including and not limited to (i) aircraft equipment, (ii) aerospace equipment, (iii) undersea equipment, (iv) power plant control equipment, (v) medical equipment, (vi) transportation equipment, (vii) traffic signal equipment, (viii) disaster prevention / crime prevention equipment. The only warranty that Insight SiP provides regarding the products is its conformance to specifications provided in datasheets. Insight SiP hereby disclaims all other warranties regarding the products, express or implied, including without limitation any warranty of fitness for a particular purpose, that they are defect-free, or against infringement of intellectual property rights. Insight SiP customers agree to indemnify and defend Insight SiP against all claims, damages, costs and expenses that may be incurred, including without any limitation, attorney fees and costs, due to the use of products.

Navigation menu