Insignia NS R2001 User Manual To The 0b6f4f25 Ca5f 421a A009 63a09f645e54

User Manual: Insignia NS-R2001 to the manual

Open the PDF directly: View PDF PDF.
Page Count: 20

DownloadInsignia NS-R2001 User Manual  To The 0b6f4f25-ca5f-421a-a009-63a09f645e54
Open PDF In BrowserView PDF
User Guide
AM/FM Stereo Receiver

NS-R2001

Before using your new product, please read these instructions to prevent any damage.

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Electric shock warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1
1
1
1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Front controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3
4
4
5
5

Setting up your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Finding a location for your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5
5
8
8

Using your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Listening to audio on your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjusting the tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting the sound volume balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ii

www.insigniaproducts.com

Insignia NS-R2001
AM/FM Stereo Receiver
Introduction

Power cord
Caution

Congratulations on your purchase of a high-quality
Insignia product. Your NS-R2001 represents the
state of the art in stereo receiver design and is
designed for reliable and trouble-free performance.

We recommend that most appliances be placed
upon a dedicated circuit—a single outlet circuit
which powers only that appliance and has no
additional outlets or branch circuits. Check the
specification page of this manual for power
requirements.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine your receiver cord, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of your receiver, and have
the cord replaced with an exact replacement part by
an authorized service provider.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
your receiver.
To disconnect power from the outlet, pull out the
plug. When installing your receiver, make sure that
the plug is easily accessible.

Safety information
Electric shock warning
CAUTION
Risk of Electric Shock

Do Not Open

Warning
To reduce the risk of electric shock, do not remove
the cover or back. There are no user-serviceable parts
inside. Refer servicing to qualified service personnel.
This lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within your receiver’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying your receiver.

Important safety instructions
1
2
3
4
5
6
7

Warning
To prevent fire or electric shock hazard, do not
expose this receiver to rain or moisture.

8

Caution
Your receiver should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on your
receiver.

9

Ventilation
Caution
Do not block any ventilation openings. Install in
accordance with these instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of your
receiver and to protect it from over-heating.
The openings should never be blocked by placing
your receiver on a bed, sofa, rug, or other similar
surface. This receiver should not be placed in a
built-in installation such as a bookcase or rack unless
correct ventilation is provided or these instructions
have been adhered to.

10

11

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.

www.insigniaproducts.com

1

Insignia NS-R2001 AM/FM Stereo Receiver

12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

2

15 To reduce the risk of fire or electric shock, do not
expose this device to rain, moisture, dripping, or
splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
16 An apparatus with a three-prong,
grounding-type plug is a Class I apparatus,
which needs to be grounded to prevent
possible electric shock. Make sure that you
connect this Class I device to a grounding-type,
three-prong outlet.
17 The wall plug is the disconnecting device. The
plug must remain readily operable.
18 Batteries should not be exposed to excessive
heat such as sunshine, fire, or the like.

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

Features
Front controls

Item

Description

Function

1

ON/STANDBY button

2

STANDBY indicator

3
4

BAND button
TUNE/PRESET button

5

MEMORY button

6
7
8

Remote sensor
Display
POWER button

9
10

Headphone (PHONES) jack
SPEAKER A/B button

11
12
13

BALANCE button
TONE button
UP/DOWN knob

14

INPUT SELECTOR knob

15

MASTER VOLUME control
knob

Press to turn on your stereo receiver. Press
again to put your stereo receiver in standby
mode.
Lights blue when your stereo receiver is in
standby mode.
Press to toggle between AM and FM.
Press to toggle between tune and preset
mode.
Press to save a station preset.
Press and hold to automatically search for
FM stations and store them in memory.
Receives the signal from the remote control.
Provides information about the receiver.
Press to power on the stereo receiver putting
it into standby mode. Press again to power
down the stereo receiver
Plug 1/4” stereo headphones into this jack.
Press to cycle through the available speaker
options. Speakers off>Speaker A on
>Speaker B on >Speakers A and B on.
Press to turn the balance mode on.
Press to turn the tone mode on.
Turn to tune the radio frequency up or down,
or to adjust tone, balance, and so on,
depending on the receiver mode.
Turn to cycle through the available receiver
inputs.
Turn to increase or decrease the volume.

www.insigniaproducts.com

3

Insignia NS-R2001 AM/FM Stereo Receiver

Display

1

Item Description
1
2
3
4
5
6

Headphone
indicator
Display indicator
STEREO indicator
TUNE indicator
SLEEP indicator
PRESET/Sleep
time indicator

3

2

5

4

Function

Item Description

Lights when in Headphone mode and headphones are
connected.
Shows input, frequency, volume level, and operating
information.
Lights when in stereo mode.
Lights when tuned to a radio station.
Lights when the sleep timer is active.
Shows preset number or sleep time remaining.

7
8

6

7

Function

PRESET indicator

Lights to indicate that the receiver will scan through
preset radio channels when tuning.
MEMORY indicator Lights when setting preset channels.

Back

3

1

2

Item

Description

Function

1

AM and FM
Connect the AM and FM antennas to these jacks.
antenna jacks
PHONO jacks
Connect a turntable to these jacks.
Audio input jacks Connect audio input devices to these jacks to play their
audio through your receiver.
Speaker
Connect speakers to these terminals.
terminals
AC power cord
Plug this cord into an AC power outlet.

2
3
4
5

4

8

4

www.insigniaproducts.com

5

Insignia NS-R2001 AM/FM Stereo Receiver

Remote control

Item Description

Function

15

AUX 2 button

16

PHONO button

17

MUTE button

18

TUNE

19
20
21

VOLUME / buttons
MEMO button
TREBLE –/+ buttons

/

buttons

Press to select the device connected to the
AUX 2 jack as the audio source.
Press to select a turntable as the audio
source.
Press to mute the sound from your receiver.
Press again to restore the sound.
Press to tune the radio to a lower or higher
frequency.
Press to increase or decrease the volume.
Press to memorize a preset station.
Press to decrease or increase the treble.

Package contents
•
•
•
•
•
•
•

Receiver
Remote control
AAA batteries (2)
Indoor AM antenna
Indoor FM antenna
User Guide
Quick Setup Guide

Setting up your receiver
Finding a location for your receiver
• Install your receiver on a stable flat surface.
Position your receiver so that it can have a direct
line of sight to the remote control.
• Do not expose your receiver to extremes of
temperature or humidity.
• Avoid placing your receiver on a hot surface such
as on top of other hot running equipment. Make
sure that there is adequate ventilation to your
receiver.
Caution

Item Description
1

POWER button

2
3

Number buttons
PRESET button

4
5

MO/ST button
AUX 1 button

6

CD button

7
8

TUNER button
PRESET / buttons

9

BALANCE L and R buttons

10
11
12
13

BASS –/+ buttons
STANDBY button
SPEAKER A and B buttons
DIMMER button

14

SLEEP button

Do not install this receiver in a confined space such as
a bookcase.

Function
Press to turn the power on to your stereo
receiver.
Press to enter a preset number.
Press to scan preset stations in order. Press
again to stop scanning.
Press to switch to mono or stereo mode.
Press to select the device connected to the
AUX 1 jack as the audio source.
Press to select the device connected to the
CD jacks as the audio source.
Press to select the tuner as the audio source.
Press to tune the radio to the previous or
next preset station.
Press to adjust the balance to the left and
right.
Press to decrease or increase the bass.
Press to set your receiver to standby mode.
Press to switch to speaker A or B.
Press to adjust the brightness of the display
(On, DIm, Off).
Press to cycle through the available sleep
timer intervals (from 10 to 90 minutes).

Note
Connect the AC cord only after the speakers,
antenna, and all optional equipment have been
connected. Never make or change any connections
with the power turned on.

Connecting devices
Warning
Do not plug the AC cord into the AC outlet until all
connections are completed.

Notes

www.insigniaproducts.com

Be sure to observe the color coding when connecting
audio and speaker cords.
Make connections firmly and correctly. Failure to do
this can cause loss of sound, add noise to the sound,
or damage your receiver.

5

Insignia NS-R2001 AM/FM Stereo Receiver

Connecting audio-only devices

Connecting the antennas
To connect the antennas:
1 Connect the Indoor FM antenna (included) to
the FM jack on the back of the receiver.

REC (LINE) IN

PLAY (LINE) OUT

Indoor AM antenna

PLAY OUT

Tape deck

CD player

MP3 player
FM antenna

2 Move the position of the antenna until you get
the best reception of your favorite FM stations.

PLAY (LINE) OUT

Note
To improve reception, you may use a 75 Ω
outdoor antenna instead of an indoor antenna.
Disconnect the indoor antenna before replacing it
with an outdoor antenna.

3 Remove the AM antenna from it’s package (if
necessary), uncoil the wire, then fold the two
halves of the loop together.
4 Fold the base under the loop and press it onto
the pins on the bottom of the loop.

Audio cable with mini-plug (not included)

Connecting devices with video

REC IN

AUDIO OUT

Indoor AM antenna

PLAY OUT
VCR
DVR/DVD/Blu-ray

VIDEO OUT

VIDEO OUT

5 To connect the Indoor AM antenna, press the
GND and AM Loop levers, insert the ends of the
wires, then release the levers. Make sure that
only the bare, stripped wire is inserted in the
jack.

TV

Note
To improve reception, you may use an outdoor AM
antenna instead of a loop AM antenna. Disconnect
the indoor antenna before replacing it with an
outdoor antenna.

6 Move the position of the antenna until you get
the best reception of your favorite AM stations.

6

To connect devices with video:
1 Connect the cable from the Audio Out jack on
the audio device to the L/R audio jacks on the
receiver.
2 Connect the video cables (component,
composite, HDMI, DVI, S-Video, or RF) from the
output jack on the video device to the
appropriate input jack on your TV.

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

3 Make sure it is fastened firmly by pulling the
cable lightly.

Connecting a turntable

Notes
If you have only one pair of speakers, connect them
to the SPEAKER A terminals.

Be sure to connect the speakers correctly,
according to the channel (left and right) and the
polarity (+ and -). If you do not make the
connections correctly, you will not hear any
sounds from the speakers.
If the sound is unnatural and lacks bass, the
speaker polarity is incorrect.
Connecting headphones

Turntable with MM-type
cartridge

Note
To connect a turntable with an MC type cartridge, use
a separate head amplifier or step-up transformer.

Connecting speakers
Speaker A

Right

Left

To connect your headphones:
1 Insert a 1/4” headphone plug into the
headphone jack on the receiver.
2 Press the SPEAKER A or SPEAKER B button on
the remote to turn the corresponding speakers
off. The corresponding speaker indicator turns
off, H appears on the display, and sound is heard
from the headphones.
Right

Connecting the power

Left

To connect your receiver to power:
• Plug the power cord into an AC outlet.

Speaker B

Caution
We recommend that you use speakers with an
impedance of 8 Ohms or more if using only the
SPEAKER A or SPEAKER B terminals. Use speakers
with an impedance over 16 Ohms or more if using
both the SPEAKER A or SPEAKER B terminals.
Do not let the bare speaker wires touch each other or
any metal part of this receiver. Doing so may damage
the receiver or speaker.

To connect your speakers:
1 Turn the terminal cap to loosen it.
2 Insert the bare wire into the terminal fully and
tighten the terminal cap to securely connect it.
Make sure that you strip the wire adequately so
that none of the wire insulation is under the
terminal.

www.insigniaproducts.com

7

Insignia NS-R2001 AM/FM Stereo Receiver

Using your receiver

Installing batteries
Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.
Remove the batteries if they are not to be used for an
extended period of time.

Tips
The following settings are stored in memory before
the receiver is turned off:
• INPUT SELECTOR settings
• Preset stations.
If the electricity fails or the AC power cord is
unplugged for more than a week, your memory is
cleared.

To install the batteries:
1 Remove the cover.

Listening to audio on your receiver

2 Insert two AAA batteries into the compartment
matching the polarity indicated.
3 Replace the cover.

To listen to audio on your receiver:
1 Press the POWER ON button on the receiver.
The STANDBY indicator lights blue.
2 Press the POWER ON button on the remote
control or the ON/STANDBY button on the
receiver to turn the receiver on. The Standby
indicator turns off.

Using the remote control
Use the remote control by pointing it towards the
receiver’s remote sensor window. Objects between
the remote control and sensor window may
prevent proper operation.

OR

23" (7m)
30°

30°

Tip
You can put the receiver in Standby mode by
pressing the STANDBY button on the remote control
when the receiver is on.
With the receiver in Standby mode, you can also turn
the power on by pressing an Input Selector button
on the remote control.

Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees of
perpendicular to the front of the receiver.

3 Turn on devices connected to the receiver.
4 If you connected a video device, such as a DVD
or Blu-ray player:
a) Select that device's input on the TV.
b) Turn your TV speakers off if you only want
the audio to come from your receiver.

Cautions
•

•
•

8

Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a case,
change the angle of the lighting or receiver, or
operate the remote control closer to the remote
sensor window.

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

5 Rotate the INPUT SELECTOR knob or press the
input selector button to select the input source.

7 Press SPEAKER A or SPEAKER B on the remote
control or the SPEAKER A/B button on the
receiver to turn the speakers on. SPK A, SPK B,
SPK AB, or SPK OFF appears on the display and
sound is heard from the speakers.

OR

OR

6 Turn the MASTER VOLUME dial or press
VOLUME / to adjust the sound level.

Adjusting the tone
Adjusting the tone lets you increase or decrease the
bass and/or treble tones of the music you are
listening to. When TON CTRL is shown on the
display, you can adjust the tone. When TON DIR is
shown on the display, the tone cannot be adjusted.
OR

-ORPress MUTE on the remote control to turn the
sound off. “MUTE” flashes on the display. Press
MUTE again to turn the sound back on.

To adjust the tone:
1 Press the TONE button on the receiver, then
rotate the UP/DOWN knob until TON CTRL
appears on the display.
2 On the remote, press the TREBLE+/– or
BASS+/– buttons to adjust the tone.
OR
On the receiver, press the TONE button
repeatedly to cycle through the available tone
modes (BASS>TREBLE>TON CTRL). The tone
mode is displayed for three seconds.

www.insigniaproducts.com

9

Insignia NS-R2001 AM/FM Stereo Receiver

3 Rotate the UP/DOWN knob to adjust the tone.

Listening to the radio
You can have the receiver automatically tune to
radio stations, or you can do it manually using the
TUNE/PRESET button on the receiver or the TUNER
button on the remote. Each time this button is
pressed, the mode changes as follows:
• TUNE mode—the PRESET indicator turns off and
the tuner scans through the available stations.
• PRESET mode—the PRESET indicator lights up
and the tuner only scans through stations saved
into the preset memory.
Auto tuning to a radio station

OR

To auto tune a radio station:
1 Repeatedly press BAND on the receiver or
TUNER on the remote to select AM, FM mono,
or FM Stereo.

Notes
•
•
•

If the tone display disappears, start again from
step 1.
Extreme settings at high volume may damage
your speakers.
To cancel the tone direct function, press the
TONE button again. TON CTRL is displayed and
DIR turns off.

OR

Adjusting the sound volume balance
To adjust the sound volume balance:
1 Press BALANCE L or BALANCE R on the remote
or press BALANCE on the receiver. “BAL” and the
balance level is displayed for three seconds.

Band

2 Rotate the UP/DOWN knob to adjust the
balance.

2 Press TUNE/PRESET to set the tuning mode to
TUNE.

OR

Note
If the balance display disappears, start again from
step 1.

10

Frequency

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

3 Rotate the UP/DOWN knob quickly or press and
hold the TUNE / buttons.

2 Press TUNE/PRESET to set the tuning mode to
TUNE.

OR

3 Rotate the UP/DOWN knob one by one slowly
or press the TUNE / buttons repeatedly
until the right frequency has been reached.

OR

The tuner searches until a station of sufficient
strength has been found. The display shows the
tuned frequency and TUNE.
Weak stations are skipped during auto tuning.
Manually tuning a radio station
Manual tuning is useful when you already know the
frequency of the station you want to listen to.
To manually tune a radio station:
1 Repeatedly press BAND on the receiver or
TUNER on the remote control to select AM, FM
Mono, or FM Stereo.

Presetting radio stations
You can automatically or manually store as many as
30 preset stations in memory.
To automatically preset radio stations:
1 Press and hold the MEMO button on the remote
or the MEMORY button on the receiver for more
than two seconds.

OR

OR

Band

Frequency

AUTO MEM blinks on the display and the
receiver automatically searches for and presets
as many as 30 FM stations.

www.insigniaproducts.com

11

Insignia NS-R2001 AM/FM Stereo Receiver

2 To stop automatically presetting stations, press
MEMO/MEMORY again.

5 Repeat this procedure to memorize additional
stations.
Tuning to preset stations

Notes
•
•

Weak FM stations cannot be memorized
You can manually preset AM stations or weak
stations.

To manually preset a radio station:
1 Press TUNE/PRESET until PRESET is not
displayed.
2 Tune to the station.
3 Press the MEMO button on the remote or the
MEMORY button on the receiver. MEM blinks
for five seconds.

To tune to a preset station:
1 Select the tuner as the input source.
2 Press TUNE/PRESET to select the preset mode.
PRESET lights up.

3 Rotate the UP/DOWN knob or press the PRESET
/ buttons on the remote control.

OR

OR

4 Select a preset number between 1 and 30 by
turning the UP/DOWN knob, or by pressing the
PRESET / buttons, then pressing the
MEMO button again.
- OR Enter a preset number between 1 and 30 by
using the number keys.

-OREnter the preset number using the numeric
keypad.
Note
When using the numeric keypad on the remote
control, if your number is greater than nine, enter the
first digit, then enter the second digit within two
seconds.

Notes
•

•
•
•

12

When using the numeric keypad on the remote
control, if your number is greater than nine,
enter the first digit, then enter the second digit
within two seconds.
When using the numeric keypad, the station is
stored automatically without pressing the
MEMO button.
A stored frequency is erased from memory by
storing another frequency in its place.
If MEM goes off, start again from step 3.

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

Recording

Scanning preset stations in sequence
To scan preset stations:
1 Press the PRESET button on the remote control.

Use your stereo receiver as a switch to connect your
audio sources to the audio recording device that is
connected to AUX 1 OUT (for example, a tape
deck). You can record audio from your CD, Phono, or
AUX 2 device to the audio recording device. You can
also record a CD, Phono, or AUX 1 audio source if
your audio recording device is connected to AUX 2
OUT.
Notes
•
•

The volume, tone (bass and treble), and balance
settings have no effect on the recording signals.
When you select the tuner, CD, or PHONO as a
recording source, recording may be made on
AUX 1, or AUX 2, or both simultaneously.

Recording on AUX 1
To record on AUX 1:
1 Select the recording input source (this cannot
be AUX 1).

The receiver starts scanning the stations in the
preset sequence. Each station is sampled for five
seconds.
Note

OR
Stations with weak signals will not be scanned, and
will therefore not be sampled.

2 Press the PRESET button again to stop
scanning.
Listening to FM stereo broadcasts
To listen to FM stereo broadcasts:
• While listening to an FM broadcast, press the
MO/ST button. Each time this button is pressed,
the FM mode changes as follows:
• Stereo mode—ST lights up.
• Mono mode—ST turns off.

2 Start recording on the AUX 1 device.
3 Start play on your input device to provide the
audio signal to record.
Recording on AUX 2
To record on AUX 2:
1 Select the recording input source (this cannot
be AUX 2).

OR

www.insigniaproducts.com

13

Insignia NS-R2001 AM/FM Stereo Receiver

2 Start recording on the AUX 2 device.
3 Start play on your input device to provide the
audio signal to record.

Using the sleep timer
The sleep timer automatically turns the receiver off
after a specified period of time.

Each time this button is pressed, the brightness
changes as follows:
• ON
• Dim
• OFF
Note

To use the sleep timer:
• Press the SLEEP button to specify the amount of
time you want the receiver to play.

Each time this button is pressed, the time
changes as follows:
• 10 minutes
• 20 minutes
• 30 minutes
• 60 minutes
• 90 minutes
• OFF
Note
While operating the sleep timer, the

lights up.

Adjusting the display brightness
To adjust the display brightness:
• Press the DIMMER button to set the brightness of
the display.

14

www.insigniaproducts.com

If the display is off, pressing any button turns the
display on.

Insignia NS-R2001 AM/FM Stereo Receiver

Maintaining

Category

To clean this receiver, wipe with a soft, dry cloth. If
the surfaces are extremely dirty, use a soft cloth
dipped in a soap and water solution or a weak
detergent solution.
• Never use alcohol, paint thinner, or benzine to
clean this receiver.
• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.

Troubleshooting
If a problem occurs, run through the table below
before contacting Insignia.
If the problem persists, attempt to solve it by
switching the receiver off and on again. If this fails
to resolve the problem, contact Insignia. Under no
circumstances should you attempt to repair the
receiver yourself as this could void the warranty.
Category

Problem

Possible Solution

No power.

• The AC power cord is
disconnected.
• Poor connection at AC wall
outlet or the outlet is
inactive.

• Connect the cord securely.
• Check the outlet using a lamp or
another appliance.

No sound.

• The speaker cords are loose
or disconnected.
• The volume is adjusted too
low.
• The MUTE button on the
remote control is pressed to
ON.
• Speakers are not switched
on.
• Incorrect selection of the
input source.
• Incorrect connections
between the components.
• The correct speaker is not
selected.

• Check the speaker connections.
• Adjust the volume.
• Press the MUTE button to cancel the
muting effect.
• Turn on one or both speakers.
• Select the desired input source
correctly.
• Make connections correctly.
• Press SPEAKER A or B to select the
correct speakers.

• No antenna is connected.
Stations cannot • The desired station
frequency is not tuned in.
be received.
• The antenna is in wrong
position.

• Connect an antenna.
• Tune in the desired station
frequency.
• Move the antenna and retry tuning.

• An incorrect station
frequency has been
memorized.
• The memorized stations are
Preset stations cleared.
cannot be
• No antenna is connected.
received.
• The antenna is not
positioned for the best
reception.
• The receiver is not in
PRESET mode.

• Memorize the correct station
frequency.
• Memorize the stations again.
• Connect an antenna.
• Change the position of the
• antenna.
• Press TUNE/PRESET until the
PRESET indicator lights.

Poor FM
reception.

• No antenna is connected.
• The antenna is not
positioned for the best
reception.
• The antenna connection
may not to secure.
• You may not be fully tuned
to the correct frequency.

Problem

Continuous
hissing noise
during FM
reception,
especially
when a stereo
broadcast is
received.

• Weak signals.
• The antenna connection
may not to secure.
• You may not be fully tuned
to the correct frequency.
• The receiver may be too
close to a TV or another
appliance.
Continuous or Noise is caused by motors,
intermittent fluorescent lamps, or
hissing noise lightning.
during AM
reception,
especially at
night.

No recording.

Possible Solution
• Change the position of the antenna.
• Install an outdoor FM antenna.
• Make sure that the antenna is
properly secured.
• Make sure that you are tuned to the
correct frequency.
• Move the devices or turn them off.
• Try using an outdoor antenna.
• Keep the receiver away from noise
sources.
• Install an outdoor AM antenna.

• Incorrect selection between • Make connections correctly.
the components.
• Operate each component correctly.
• Incorrect operation of each
component for playback and
recording.

There is noise • The receiver may be too
or a humming
close to a TV or another
sound.
appliance.

• Connect the turntable’s ground cord
to the PHONO GND terminal.
• Move the devices or turn them off.

The sound lacks • The speaker polarity (+/–) • Check all speakers for correct
bass.
might be reversed.
polarity.
The volume of • The volume and sound
• Connect the same type of speakers
SPEAKER A is
quality may differ
to the SPEAKERS A and B terminals if
different from
depending on the speaker’s you want to use SPEAKERS A and B at
that of
size, etc.
the same time with the same
SPEAKER B.
volume.
I can hear the • The correct video input on • Select the input source that matches
audio, but I
the TV is not selected.
the device connected to the TV.
can’t see the
video on my TV.
Remote control • Batteries are not installed or • Replace the batteries.
are dead.
• Remove the obstacle.
unit does not
• The remote sensor is
operate.
obstructed.

• Connect an antenna.
• Change the position of the antenna.
• Make sure that the antenna is
properly secured.
• Make sure that you are tuned to the
correct frequency.
• Try using an outdoor antenna.

www.insigniaproducts.com

15

Insignia NS-R2001 AM/FM Stereo Receiver

Specifications

Legal notices
FCC Statement

Notes
•
•
•

Design and specifications are subject to change
without notice.
Weight and dimensions shown are
approximate.
Specifications and external appearance may be
changed for the sake of improvement.

Amplifier Power output, stereo mode, 8 Ohms (Ω), THD 1%, 40 Hz~20 kHz: 2×100 W
Total harmonic distortion, 8 Ohms (Ω), 100 W, 40 Hz~20 kHz: 0.04%
Intermodulation distortion, 60 Hz:7 kHz= 4:1 SMPTE, 8 Ohms (Ω), 100 W:
0.02 %
Input sensitivity, 47 kΩ, Phono (MM):
2.5 mV
Input sensitivity, 47 kΩ, Line (CD, AUX1, AUX2):
420 mV
Signal to noise ratio, IHF “A” weighted, Phono (MM):
70 dB
Signal to noise ratio, IHF “A” weighted, Line (CD, AUX1, AUX2): 95 dB
Frequency response Phono (MM), RIAA, 30 Hz~20 kHz:
+/- 3 dB
Frequency response Line (CD, AUX1, AUX2), 20 Hz~100 kHz: +/- 3 dB
Output level AUX1, AUX2 OUT, 2.2 kΩ:
200 mV
Bass/Treble control, 100 Hz/10 kHz:
±10 dB

FM Tuner Tuning frequency range:
87.5~107.9 MHz
Usable sensitivity, THD 3%, S/N 30 dB:
15 dBf
50 dB quieting sensitivity, mono/stereo:
25.2 / 45.2 dBf
Signal to noise ratio, 65 dBf, mono/stereo:
68/65 dB
Total harmonic distortion, 65 dBf,1 kHz, mono/stereo:
0.5 / 0.8%
Frequency response, 20 Hz~14 kHz:
+/- 3 dB
Stereo separation, 1 kHz:
40 dB
Capture ratio:
4 dB
IF rejection ratio:
80 dB
AM Tuner Tuning frequency range:
530~1710 kHz
Usable sensitivity:
800 μV/m
Signal to noise ratio:
40 dB
Selectivity:
25 dB
General Power supply:
120 V ~ 60 Hz
Power consumption:
2.5 A
Dimensions (W×H×D, including protruding parts): 17.3 × 5.6 × 14.9 inches
(44 × 14.1 × 37.8 cm)
Weight (Net):
17.4 lbs (7.9 kg)

16

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measure
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help
Warning: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.

DHHS and FDA safety certification
This product is made and tested to meet safety standards of the
FCC, requirements and compliance with safety performance of
the U.S. Department of Health and Human Services, and also
with FDA Radiation Performance Standards 21 CFR Subchapter J.

Canadian Notice
This Class B digital apparatus complies with Canadian CAN
ICES-3 (B)/NMB-3(B).
This device complies with Industry license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
Ce dispositif est conforme à la norme de l'industrie RSS exempts
de licence (s). Son fonctionnement est soumis aux deux
conditions suivantes: (1) cet appareil ne peut pas provoquer
d'interférences et (2) cet appareil doit accepter toute
interférence, y compris les interférences qui peuvent causer un
mauvais fonctionnement du dispositif.

www.insigniaproducts.com

Insignia NS-R2001 AM/FM Stereo Receiver

One-year limited warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new product (“Product”), that the Product shall
be free of defects in the original manufacture of the material or
workmanship for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This Product must
be purchased from an authorized dealer of Insignia brand
products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify
Insignia during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.

How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. The purchase date is printed on the
receipt you received with the Product.

What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2013 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.

How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.

Where is the warranty valid?
This warranty is valid only in the United States and Canada at
Best Buy or Future Shop branded retail stores or websites to the
original purchaser of the product in the county where the
original purchase was made.

What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product, including the
antenna
• Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been
altered or removed

www.insigniaproducts.com

17

www.insigniaproducts.com

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2013 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.

V7 ENGLISH
13-1047



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:11:18 15:30:07Z
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2013:11:18 15:39:59-06:00
Metadata Date                   : 2013:11:18 15:39:59-06:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:fa5dcf4a-7ce8-4bc2-8540-a5dbdd041433
Instance ID                     : uuid:cd0888bd-b025-4143-89ba-a0fe06fb0d63
Page Count                      : 20
Creator                         : FrameMaker 7.2
EXIF Metadata provided by EXIF.tools

Navigation menu