Inspiring INTELLIPLUG Smart plug User Manual

Inspiring Corporation Limited Smart plug

User manual

Cnct | intelliPLUG Quick StartGuideapp.cnct.comCnct-Quick-Guide_v2-.indd22017/4/2110:25:56
Quick Start GuideCnct-Quick-Guide_v2-.indd32017/4/2110:25:56
Get To Know YourintelliPLUGCompact DesignActual SizeWi-Fi EnabledPowerButtonControl Appliancesand Devices with AppCompatible withStandard OutletElectrical Ratings••AC 120V, 60 Hz15A1800 WFor general use onlyCnct-Quick-Guide_v2-.indd42017/4/2110:25:56
Cnct-Quick-Guide_v2-.indd52017/4/2110:25:56Quick Start Guide1.Download the Cnct app.•Go to http://app.cnct.com to install the free Cnct app foryour phone or tablet.•Once installed, follow the steps to setup your Cnctaccount.2.3.Ensure your phone (or tablet) and intelliPLUGare connected to the same Wi-Fi network•Must be a 2.4 GHz Wi-Fi networkPlug in your intelliPLUG. Once plugged in, the power buttonwill begin flashing a blue light; indicating it is ready forsetup. From the Cnct app, click the “ ”icon in the upperright hand corner, select the intelliPLUG device, enter yourWi-Fi password, and begin setup. Once setup is complete,the blue light will stop flashing and you will be prompted tocreate a name for your intelliPLUG. If the setup fails, resetthe intelliPLUG and go through the setup process again(see below).How To Reset intelliPLUGWhen plugged in, press and hold the power button on the side ofyour intelliPLUG for 4 seconds until the blue light begins flashing.Use the Cnct app to reconfigure the network settings.Safety Warnings:•Plug directly into electrical outlet(Do not use an extension cord)••••••For indoor use onlyRemove intelliPLUG from outlet before cleaningDo not clean with liquidDo not remove ground pin (middle pin)Do not use in wet or damp areasKeep children away from intelliPLUG and outletDo not exceed the recommended electrical ratingsDo not use in precision timing applications whereinaccurate timing could be dangerous(Example: sunlamps, saunas, etc.)•Do not use with devices that should not be operatedwithout supervision
Operating conditions:For in door use onlyElectrical ratingsModel No.Volt.OutputLoad TypeComplete Declar.(i.e. 1.C.L, etc.)intelliPLUG120 V,60Hz15 AResistiveType 1.B, Operating15 AGeneral Use600 WTungsten500 VAElectronic Ballast1/2 hpHorse Power3. Operating ambient temperature：0~40℃Type of Action:Type of 1.BFCC StatementThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment must be installed andoperated in accordance with provided instructions and theantenna(s) used for this transmitter must be installed to provide aseparation distance of at least 20 cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:(1) this device may not cause harmful interference, and(2) thisdevice must accept any interference received, including interferencethat may cause undesired operation.Caution!Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operatethe equipment.Canada StatementThis device complies with Industry Canada’s licence-exempt RSSs.Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device mustaccept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canadaapplicables aux appareils radio exempts de licence. L’exploitation estautorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d’encompromettre le fonctionnement.The device meets the exemption from the routine evaluation limitsin section 2.5 of RSS 102 and compliance with RSS-102 RF exposure,users can obtain Canadian information on RF exposure andcompliance.Le dispositif rencontre l'exemption des limites courantesd'évaluation dans la section 2.5 de RSS 102 et la conformité àl'exposition de RSS-102 rf, utilisateurs peut obtenir l'informationcanadienne sur l'exposition et la conformitéde rf.This transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter. This equipment should beinstalled and operated with a minimum distance of 20 centimetersbetween the radiator and your body.Cet émetteur ne doit pas être Co-placéou ne fonctionnant en mêmetemps qu'aucune autre antenne ou émetteur. Cet équipement devraitêtre installéet actionnéavec une distance minimum de 20centimètres entre le radiateur et votre corps.

Navigation menu