Inspiring INTELLIPLUG Smart plug User Manual
Inspiring Corporation Limited Smart plug
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3412544 |
| Application ID | 25/UWy2y2j7EIfvmjIBYdw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.27kB (215901 bits) |
| Date Submitted | 2017-06-04 00:00:00 |
| Date Available | 2017-06-04 00:00:00 |
| Creation Date | 2017-04-26 17:15:47 |
| Document Lastmod | 2017-04-26 17:40:30 |
| Document Title | User manual |
| Document Creator | WPS Office |
| Document Author: | NETWORK SERVICE |
Cnct | intelliPLUG Quick Start Guide Cnct-Quick-Guide_v2-.indd app.cnct.com 2017/4/21 10:25:56 Cnct-Quick-Guide_v2-.indd Quick Start Guide 2017/4/21 10:25:56 Get To Know Your intelliPLUG Compact Design Actual Size Wi-Fi Enabled Power Button Control Appliances and Devices with App Compatible with Standard Outlet Electrical Ratings • • Cnct-Quick-Guide_v2-.indd AC 120V, 60 Hz 15A 1800 W For general use only 2017/4/21 10:25:56 Quick Start Guide 1. Download the Cnct app. •Go to http://app.cnct.com to install the free Cnct app for your phone or tablet. •Once installed, follow the steps to setup your Cnct account. 2. Ensure your phone (or tablet) and intelliPLUG are connected to the same Wi-Fi network •Must be a 2.4 GHz Wi-Fi network 3. Plug in your intelliPLUG. Once plugged in, the power button will begin flashing a blue light; indicating it is ready for setup. From the Cnct app, click the “ ”icon in the upper right hand corner, select the intelliPLUG device, enter your Wi-Fi password, and begin setup. Once setup is complete, the blue light will stop flashing and you will be prompted to create a name for your intelliPLUG. If the setup fails, reset the intelliPLUG and go through the setup process again (see below). How To Reset intelliPLUG When plugged in, press and hold the power button on the side of your intelliPLUG for 4 seconds until the blue light begins flashing. Use the Cnct app to reconfigure the network settings. Safety Warnings: • • • • • • •• Cnct-Quick-Guide_v2-.indd Plug directly into electrical outlet (Do not use an extension cord) For indoor use only Remove intelliPLUG from outlet before cleaning Do not clean with liquid Do not remove ground pin (middle pin) Do not use in wet or damp areas Keep children away from intelliPLUG and outlet Do not exceed the recommended electrical ratings Do not use in precision timing applications where inaccurate timing could be dangerous (Example: sunlamps, saunas, etc.) Do not use with devices that should not be operated without supervision 2017/4/21 10:25:56 Operating conditions:For in door use only Electrical ratings 3. Model No. Volt. intelliPLUG 120 V, 60Hz Output 15 A Load Type Resistive 15 A General Use 600 W Tungsten 500 VA Electronic Ballast 1/2 hp Horse Power Complete Declar. (i.e. 1.C.L, etc.) Type 1.B, Operating Operating ambient temperature：0~40℃ Type of Action:Type of 1.B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : NETWORK SERVICE Create Date : 2017:04:26 17:15:47+09:00 Modify Date : 2017:04:26 17:40:30+08:00 Subject : Trapped : false XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : NETWORK SERVICE Description : Title : Comments : Company : Source Modified : D:20170426171547+09'15' Creator Tool : WPS Office Metadata Date : 2017:04:26 17:40:30+08:00 Keywords : Producer : Document ID : uuid:9d0575c2-29fe-45ba-b7b3-b47b686f98d9 Instance ID : uuid:0ae91d8c-818c-43a6-9edd-266740ea85b0 Page Count : 6EXIF Metadata provided by EXIF.tools