Intech Electronics CS8077 Bluetooth pendant User Manual MCB 8077010 0A USE MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	668171
Application ID	ByfWXcmL1WcVr2c/b4JAVw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	109.46kB (1368308 bits)
Date Submitted	2006-06-13 00:00:00
Date Available	2006-06-13 00:00:00
Creation Date	2006-06-12 18:03:33
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-06-13 14:12:00
Document Title	MCB-8077010-0A ( USE MANUAL )...
Document Creator	PScript5.dll Version 5.2
Document Author:	jonathancao

c.
[B]
Audio Adaptor
(supplied)
[C]
USB Bluetooth
Dongle
(not supplied)
[D]
Bluetooth enabled
PDA with A/V profile
(not supplied)
AC Adaptor
If the pairing is successful, the LED will flash green, which indicates it is in
Standby Mode and ready to answer and receive mobile phone calls from it. If
pairing does not occur as expected, turn the Pendant and the mobile phone off.
Wait for 10 seconds and repeat the pairing process from the beginning.
2. Answering incoming calls / Rejecting incoming calls
a. When an incoming call is present， ring tones of speaker will be heardfrom the
earpiece of the Pendant. Press
button will answer the call. Press button
will reject the call.
b. [Advance function] If the Pendant is connected with your mobile phone and
another Bluetooth transmitter such as the Audio Adaptor simultaneously and you
are listening to the music using the earpiece, a ring tone will prompt you. Press
button will answer the call. Press
button will reject the call and you
PLAY
will continue listening to the music.
Seven possible User Scenarios:
[A]
Bluetooth
mobile phone
(not supplied)
Yes
Yes
Yes
DC Socket
There are seven (7) user scenarios for you to enjoy the Bluetooth wireless convenience:
Pendant paired
with
Yes
Yes
Charging and recharging the battery
Thank you for buying the new CS8077 Bluetooth Stereo Pendant and the new
CS8082 Bluetooth Stereo Audio Adaptor pack. Before first time use, it is important
to charge the battery of each of them for 6 hours. Connect the A/C power adaptor
cable and the Y-cable together. And then, connect the two ends of the Y-cable to the
Pendant ' s and the Audio Adaptor's DC socket. During recharging, the LED shows a
steady red light. When the battery is fully charged, the Red LED is off.
Audio Adaptor
http://www.abe-hk.com
Scenario
! PLAY/STOP
Yes
Environmental
friendly
Yes
8.
! Removeable headphone
6. VOL +
! Volume up
Mobile phone calls only.
7.
! LED
! Forward
! Call transfer
! Redial the last number
5.
Power On/ Off
Play
Stop
Pairing
II
4. VOL ! Volume down
1.
3.
Yes
CS8077 Bluetooth Stereo Pendant
and
CS8082 Bluetooth Audio Adaptor
User Manual
2.
! Backward
! Reject the call
! Voice dialing
Music only from the audio source (MP3,
iPod, etc.) that the Audio Adaptor is
connected to.
1.
III M u s i c o n l y f r o m t h e a u d i o s o u r c e
(Notebook PC, desktop PC, etc.) that the
Bluetooth USB dongle is connected to.
CS8082
Bluetooth Stereo Audio Adaptor
CS8077
Bluetooth Stereo Pendant
IV Music only from the PDA.
Mobile phone calls and audio source
(MP3, iPod, etc.) that the Audio Adaptor is
connected to.
Yes
V OL
VI Mobile phone calls and music from the
audio source (Notebook/Desktop PC, etc.)
that the BT USB dongle is connected to.
Yes
V OL
VII Mobile phone calls and music from the
PDA.
3. Ending calls
a. While a call is in session, press
button will end the call.
b. [Advance function] If the Pendant is connected with your mobile phone and
another Bluetooth transmitter such as the Audio Adaptor simultaneously, press
button will end the call and you will continue listening to the music.
4. Last number redial
a. While the Pendant and Bluetooth mobile are in Standby Mode, press and hold
the
button for 2 seconds to redial the last dialed number.
b. [Advance function] If the Pendant is connected with your mobile phone and
another Bluetooth transmitter such as the Audio Adaptor, press and hold the
button to
P button for 2 seconds to redial the last dialed number. Press
end the call as normal.
5. Adjusting speaker volume
a. While a call is in session, pressing and releasing VOL + / VOL - buttons will
adjust the speaker volume.
b. [Advance function] While the Pendant is playing music， pressing / releasing
VOL+ / VOL - buttons will adjust the speaker volume.
6.
Activating voice dialing
When the Pendant is in standby mode, press and hold the button
for 2
seconds until a long beep is heard . The Pendant is connecting to your mobile
phone for voice dialing function . If the connection is successfully made, the
phone will ask for the name of the person you wish to call. The call will be
executed in a few seconds. If the connection is failed, the Pendant will beep
and go back to standby mode. Before the Pendant entering into voice dialing
mode , make sure the voice dialing function of the phone is enabled.
(ADVANCE FUNCTION) While the Pendant is playing the music, continuously pressing
the button
will stop the music playing and a long beep will be heard , indicating
that the Pendant is connecting with mobile phone for voice dialing function . If the
connection is successfully made, the voice dialing can be executed according to the
mobile phone ’ s menu operations . If the connection is failed, the Pendant will beep and
go back to music playing.
Remarks: Voice dialing function is not supported in Sony Ericsson K750i
Pendant
7.Transfer call
a. To transfer a call from the Pendant to your mobile phone
! If the mobile phone is enabled with the Hands-free profile, press the
PLA button while the call is in session and it will be transferred to your mobile
phone.
! If the mobile phone is enabled with the Headset profile, follow the instructions
of your mobile phone manual to do call transfers.
b. To transfer a call from your mobile phone to the Pendant
! Follow the instructions of the mobile phone manual to do call transfers
Index
1．Charging and recharging the battery .................................................................1
2. Low-battery indication ......................................................................................2
3. Turning on / Turning off the Pendant and the Audio Adaptor ..................................2
Seven possible User Scenarios ...................................................................................3
I . Stereo Pendant paired with Bluetooth mobile phone Guide [ A ] ........................4
1. Pairing
..........................................................................................4
2. Answering incoming calls / Rejecting incoming calls ................................5
3. Ending calls
.......................................................................................5
4. Last number redial
............................................................................5
5. Adjusting speaker volume
..................................................................5
6. Activating voice dialing .................................................5
7. Transfer call .......................... .................................................................6
II .
Bluetooth enabled PDA
[D]
V OL
Bluetooth mobile phone
[A ]
Volume up
V OL
V OL
Forward
Backward
V OL
Stereo Pendant paired with Stereo Audio Adaptor Guide [ B ] ........................6
1. Pairing ...................................................................................................6
2. Listening to music ..................................................................................6
Bluetooth
Stereo Pendant
Volume down
III . Stereo Pendant paired with USB Bluetooth Dongle Guide [ C ] ......................7
1. Pairing ...................................................................................................7
2. Listening to music ...................................................................................7
IV . Stereo Pendant paired with Bluetooth enabled PDA Guide [ D ] ....................8
1. Pairing ...................................................................................................8
2. Listening to music ...................................................................................8
V.
Stereo Pendant paired with Audio Adaptor and
..
Bluetooth mobile phone Guide [ A & B ]
.............................................9
1. Pairing ...................................................................................................9
2. Listening to music ...................................................................................9
3. Monitoring mobile phone calls ...................................................................9
VI . Stereo Pendant paired with USB
Bluetooth dongle and Bluetooth mobile phone Guide [ A & C ] ........................10
1. Pairing .................................................................................................10
2. Listening to music .................................................................................10
3. Monitoring mobile phone calls ................................................................10
II.
2. Low-battery indication
When the battery is low, the LED of the Pendant or that of the Audio Adaptor will
flash red instead of green. When the battery level is too low, the Pendant or the
Audio Adaptor will automatically power off.
USB Bluetooth dongle
[C]
3.
Turning on / Turning off the Pendant and the Audio Adaptor
When the Pendant or the Audio Adaptor is powered off, press and hold
or
PLAY/STOP button till the LED flashes green, which indicates the Pendant or the
Audio Adaptor is powered up. When the Pendant or the Audio Adaptor is powered
or PLAY/STOP button, the LED will keep red for a while
up, press and hold
then off, which indicates it is powered down.
VII . Stereo Pendant paired with
Bluetooth enabled PDA and Bluetooth mobile phone Guide [ A & D ] ...............11
1. Pairing .................................................................................................11
2. Listening to music .................................................................................11
3. Monitoring mobile phone calls ...............................................................11
VIII . Stereo Pendant Connected to Home HiFi and Car Audio System ......................12
Accessories Table .......................................................................................11
Bluetooth Audio Adaptor
[B]
I. [ A ] Stereo Pendant paired with Bluetooth mobile phone Guide
[ B ] Stereo Pendant paired with Stereo Audio Adaptor Guide
1. Pairing
a. While the Pendant is powered off，press and hold
button for 4 seconds.
The LED will flash red and green alternatively, which indicates the Pendant in
Pairing Mode. The Pairing Mode will last for one minute.
b. While the Stereo Audio Adaptor is powered off, press and hold PLAY/STOP
buttons for 2 seconds. The LED will flash red and green alternatively, which
indicates the Audio Adaptor is in Pairing Mode. The Paring Mode will last for one
minute.
c. Put the Pendant and the Audio Adaptor close to each other, 0.5 to 3 meters. After
a few seconds, their LED's will turn into flashing green, which indicates
successful pairing. Both units are in Standby Mode and ready to transmit audio
signal, or music from the audio source.
1. Pairing
a. While the Pendant is powered off，press and hold
button for 4 seconds .
The LED will flash red and green alternatively, which indicates the Pendant in
Pairing Mode. The Pairing Mode will last for one minute.
b. Follow the operating instructions of your Bluetooth mobile phone to start the
pairing process. Typically, this has to be done by going to a setup or connect
menu and then selecting the options to discover Bluetooth devices. It may take
several seconds to establish a Bluetooth connection. Your phone's display
should indicate that it has found the model name “ CS8077 “ ; and prompt you for
a passkey or PIN. Enter a sequence of “ 0000 “ .
2. Listening to music
a. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mm socket
of any audio source such as iPod, MP3, CD player, Notebook PC, or others.
b. Put the earpiece on.
c. Play the music on the audio source as normal; you will listen to the stereo music
from the earpiece.
FCC Interference Statement ...........................................................13
Declaration of Conformity .....................................................................14
d.
The speaker volume of the earpiece can be adjusted by pressing and releasing
the VOL + / VOL- buttons.
e. Turn the Pendant off after use.
The Audio Adaptor will be turned off
automatically. Next time, you don't need to pair them again. Turn them on, and
then they will be paired automatically and ready to transmit music from the audio
source.
Advance functions: The following user scenarios provide you a true
wireless freedom to monitor the mobile phone call status while you
are enjoying stereo music at the same time. You don't even need to
put down your earpiece.
VII. [ A & D ] Stereo Pendant paired with
Bluetooth enabled PDA and Bluetooth mobile phone Guide
* Advance functions are not supported in Sony Ericsson T610, T630
V OL
V OL
III.
[ C ] Stereo Pendant paired with USB Bluetooth Dongle Guide
1.Pairing
a. While the Pendant is powered off， press and hold
for 4 seconds . The
LED will flash red and green alternatively, which indicates the Pendant in Pairing
Mode. The Pairing Mode will last for one minute.
b. Put the Pendant, the USB Bluetooth dongle and the PC close to each other, 0.5
to 3 meters.
c. Insert the USB Bluetooth Dongle into a USB port of your Notebook PC / desktop
PC to start the pairing process. Typically, this has to be done by executing a
Bluetooth application program supporting the Audio Visual (A/V) Profile, to
discover the Pendant. It may take some time to search it depending on the
number of Bluetooth devices nearby.
d. Your PC will display the model name “ CS8077 “ if it has found the Pendant; and
ask for a passkey. Enter a sequence of “ 0000 “ . After successful pairing, follow
the instructions to establish the Bluetooth connection with the Pendant.
e. If the pairing is successful, the LED will flash green, which indicates it is in
Standby Mode and ready to receive audio signals from the dongle. If pairing
does not occur as expected, turn the Pendant and the PC off. Wait for 10
seconds and repeat the pairing process from the beginning.
2. Listening to music
a. Put the earpiece on.
b. Start a music application such as Windows Media Play or RealOne Player and
play the music; you will listen to the stereo music from the earpiece.
c. The speaker volume of the earpiece can be adjusted by pressing the VOL + / VOL
buttons.
d. While listening to music (for example, song 2), press the Pendant's FORWARD
>> button will skip to next song (for example, song 3); press the BACKWARD <<
button will replay the current song (for example, song 2). Double press the
BACKWARD button will play the last song (for example, song 1). This remote
control function is supported only by the AVRCP profile of your Bluetooth
application program.
e. Turn the Pendant off after use.
V.
[ A & B ] Stereo Pendant paired with
Audio Adaptor and Bluetooth mobile phone Guide
V OL
V OL
[ D ] Stereo Pendant paired with Bluetooth enabled PDA Guide
1. Pairing
a. While the Pendant is powered off， press and hold PLAY/PA button for 4
seconds. The LED will flash red and green alternatively, which indicates the
Pendant in Pairing Mode. The Pairing Mode will last for one minute.
b. Put the Pendant and the Bluetooth enabled PDA (with A/V profile) close to each
other, 0.5 to 3 meters.
c. Follow the operation instructions of your Bluetooth enabled PDA (with A/V
profile) to start the pairing process. Typically, this has to be done by going to a
setup or connect menu to discover the Pendant. It may take some time to search
it depending on the number of Bluetooth devices nearby.
d. Your PDA will display the model name “ CS8077 “ if it has found the Pendant; and
ask for a passkey. Enter a sequence of “ 0000 “ . After successful pairing, follow
the instructions to establish the Bluetooth connection with the Pendant.
e. If the pairing is successful, the LED will flash green, which indicates it is in
Standby Mode and ready to receive audio signals from the PDA. If pairing does
not occur as expected, turn the Pendant and the PDA off. Wait for 10 seconds
and repeat the pairing process from the beginning.
2. Listening to music
a. Put the earpiece on.
b. Play the music on the PDA as normal; you will listen to the stereo music from the
earpiece.
c. The speaker volume of the earpiece can be adjusted by pressing the VOL+/
VOL - buttons.
d. While listening to music (for example, song 2), press the Pendant's FORWARD
>> button will skip to next song (for example, song 3); press the BACKWARD <<
button will replay the current song (for example, song 2). Double press the
BACKWARD button will play the last song (for example, song 1). This remote
control function is supported only by the AVRCP profile of your Bluetooth
application program.
e. Turn the Pendant off after use.
Bluetooth
Stereo Pendant
Bluetooth mobile phone
[A]
1. Pairing
a. Follow the Pairing process [ D] to pair the Pendant and the Bluetooth enabled PDA.
b. After successful pairing, turn the Pendant off.
c. Follow the pairing process [ A ] to pair the Pendant and the Bluetooth mobile
phone.
d. After successful pairing, please follow the PDA Bluetooth application program
instructions to re-establish Bluetooth connection between the PDA and the
Pendant.
e. All three devices are in Standby Mode and the LED's should flash green.
2. Listening to music
a. Follow the Listen to music process [ D ] to enjoy the music.
Bluetooth Audio Adaptor
[B]
Bluetooth
Stereo Pendant
Bluetooth mobile phone
[A]
1.Pairing
a. Follow the Pairing process [ B ] to pair the Pendant and the Audio Adaptor.
b. After successful pairing, turn the Pendant off. The Audio Adaptor will turn off
automatically.
c. Follow the pairing process [ A ] to pair the Pendant and the Bluetooth mobile
phone.
d. After successful pairing, turn on the Audio Adaptor.
e. All three devices are in Standby Mode and the LED's should flash green.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
3. Monitoring mobile phone calls
a. Follow the [Advance function] in [ A ] to monitor phone calls.
Description
Status
A/C Adaptor
Provided
USB Charging cable
Optional
2.5mm to 3.5 mm
Audio Cable
Provided
Accessories Table
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
2. Listening to music
a. Follow the Listen to music process [ B ] to enjoy the music.
3. Monitoring mobile phone calls
a. Follow the [Advance function ] in [ A ] to monitor phone calls.
IV.
Bluetooth enabled PDA
[D]
Federal Communication Commission
Interference Statement
11
VI. [ A & C ] Stereo Pendant paired with
USB Bluetooth dongle and Bluetooth mobile phone Guide
13
VIII. Stereo Pendant Connected to Home HiFi and Car Audio System
1. Pairing
Follow the pairing process (A) to pair the Pendant and the Bluetooth Mobile phone
(with AV profile); or follow the paring process (B) to pair the Pendant and the Audio
Adapter; or Follow the process (D) to pair the Pendant and the Bluetooth enabled
PDA;
V OL
2. Listening to music
a. After successful pairing, connect the Pendant and home HiFi or car audio system
via line-in or RCA connection (cable not provided)
(a) Line-in connection:
V OL
Bluetooth
Stereo Pendant
USB Bluetooth dongle
[C]
V OL
Bluetooth mobile phone
[A]
1. Pairing
a. Follow the Pairing process [ C ] to pair the Pendant and the USB Bluetooth
dongle.
b. After successful pairing, turn the Pendant off.
c. Follow the pairing process [ A ] to pair the Pendant and the Bluetooth mobile
phone.
d. After successful pairing, please follow the PC Bluetooth application program
instructions to re-establish the Bluetooth connection between the Bluetooth
dongle and the Pendant.
e. All three devices are in Standby Mode and the LED's should flash green.
V OL
V OL
V OL
2. Listening to music
a. Follow the Listen to music process [ C ] to enjoy the music.
3. Monitoring mobile phone calls
a. Follow the [Advance function] in [ A ] to monitor phone calls
(b) RCA connection:
V OL
V OL
b. Follow the operation of instructions of your audio sources to play the music;
C. Turn off the Pendant after use.
10
12
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:06:13 14:12:00+08:00
Create Date                     : 2006:06:12 18:03:33+08:00
Page Count                      : 2
About                           : uuid:740a7144-ba86-4c5e-9b77-b451d13c3cff
Producer                        : Acrobat Distiller 6.0 (Windows)
Creation Date                   : 2006:06:12 18:03:33+08:00
Mod Date                        : 2006:06:13 14:12:00+08:00
Author                          : jonathancao
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2006:06:13 14:12:00+08:00
Document ID                     : uuid:387613da-9571-442b-8e60-d9a8fb86d927
Format                          : application/pdf
Title                           : MCB-8077010-0A ( USE MANUAL )...
Creator                         : jonathancao

EXIF Metadata provided by EXIF.tools