Intech Electronics CS8082 Bluetooth Audio Adaptor User Manual MCB 8076010 0A MANUAL FOR 8

In Tech Electronics Ltd Bluetooth Audio Adaptor MCB 8076010 0A MANUAL FOR 8

Manual

CS8076 Stereo HeadsetandCS8082 Audio AdaptorBluetoothBluetoothUser ManualIndex1 How to open the folded headset and wear ..........................................................12 Charging and recharging the battery ....................................................................23 Low-battery indication .................................................................................................34 Turning on / Turning off the Headset and the Audio Adaptor ...............................3...................................................................................4. Stereo Headset paired with mobile phone Guide [ A ]..............51. Pairing ....................................................................................................52. Answering incoming calls / Rejecting incoming calls ................................63. Ending calls .......................................................................................................64. Last number redial ...............................................................................................65. Adjusting speaker volume .......................................................................66. Activating voice dialing ..........................................................................................67. Transfer call ........................ .................................................................7. Stereo Headset paired with Stereo Audio Adaptor Guide [ B ] ........................71. Pairing .................................................................................................................72. Listening to music ...............................................................................................7. Stereo Headset paired with USB Dongle Guide [ C ] ......................81. Pairing .................................................................................................................82. Listening to music ...............................................................................................8. Stereo Headset paired with enabled PDA Guide [ D ] ....................91. Pairing .................................................................................................................92. Listening to music ...............................................................................................9. Stereo Pendant paired with Audio Adaptor andmobile phone Guide [ A & B ] ...........................................................101. Pairing ...............................................................................................................102. Listening to music .............................................................................................103. Monitoring mobile phone calls ............................................................................10. Stereo Headset paired with USB .dongle and mobile phone Guide [ A & C ] ........................111. Pairing ...............................................................................................................112. Listening to music ..............................................................................................113. Monitoring mobile phone calls ...........................................................................11. Stereo Headset paired with .enabled PDA and mobile phone Guide [ A & D ] ...............121. Pairing ...............................................................................................................122. Listening to music .............................................................................................123. Monitoring mobile phone calls ...........................................................................12Accessories Table ................................................................................................12FCC Interference Statement ..................................................................................13．．..Seven possible User ScenariosIIIIIIIVVVIVIIBluetoothBluetoothBluetoothBluetoothBluetooth BluetoothBluetooth Bluetooth..1 324Http://www.abe-hk.com65!Charging and recharging the batteryThank you for buying the new CS8076 Stereo Headset and the newCS8082 Stereo Audio Adaptor pack. Before first time use, it is importantto charge the battery of each of them for 6 hours. During recharging, the LED showsa steady red light. When the battery is fully charged, the Red LED is off.BluetoothBluetoothHeadsetAudio AdaptorAC AdaptorDC SocketCS8082h Stereo Audio AdaptorBluetootLED!Low-battery indicationWhen the battery is low, the LED of the Headset or that of the Audio Adaptor willflash red instead of green. When the battery level is too low, the Headset or theAudio Adaptor will automatically power off.!Turning on / Turning off the Headset and the Audio AdaptorWhen the Headset or the Audio Adaptor is powered off, press and hold tillthe LED flashes green, which indicates the Headset or the Audio Adaptor is poweredup. When the Headset or the Audio Adaptor is powered up, press and ,the LED will keep red for a while then off, which indicates it is powered down.buttonhold buttonc. If the pairing is successful, the LED will flash green, which indicates it is inStandby Mode and ready to answer and receive mobile phone calls from it. Ifpairing does not occur as expected, turn the Headset and the mobile phone off.Wait for 10 seconds and repeat the pairing process from the beginning.2. Answering incoming calls / Rejecting incoming callsa. When an incoming call is present, a ring tone will be heard from the earpiece ofthe Headset. Press PLAY button will answer the call. Press button willreject the call.b. If the Headset is connected with your mobile phone andanother transmitter such as the Audio Adaptor simultaneously andyou are listening to the music using the earpiece, a ring tone will prompt you.Press PLAY button will answer the call. Press button will reject the call andyou will continue listening to the music.3. Ending callsa. While a call is in session, press button will end the call.b. If the Headset is connected with your mobile phone andanother transmitter such as the Audio Adaptor simultaneously, pressSTOP button will end the call and you will continue listening to the music.4. Last number rediala. While the Headset and mobile are in Standby Mode, press and holdthe button for 2 second to redial the last dialed number.b. If the Headset is connected with your mobile phone andanother transmitter such as the Audio Adaptor, press and hold theButton for 2 second to redial the last dialed number. Press STOP button to endthecallasnormal.5. Adjusting speaker volumea. While a call is in session, pressing and releasing VOL + / VOL - buttons willadjust the speaker volume.b. While the Headset is playing music, pressing / releasingVOL+ / VOL - buttons will adjust the speaker volume.6. Activating voice dialingWhen the Headset is in standby mode, press and hold the button for 2seconds until a long beep is heard. The Headset is connecting to your mobilephone for voice dialing function. If the connection is successfully made, thephone will ask for the name of the person you wish to call. The call will beexecuted in a few seconds. If the connection is failed, the Headset will beepand go back to standby mode. Before the Headset entering into voice dialingmode, make sure the voice dialing function of the phone is enabled.While the Headset is playing the music, continuouslypressing the button will stop the music playing and a long beep will be heard,indicating that the Headset is connecting with mobile phone for voice dialing function.If the connection is successfully made, the voice dialing can be executed according tothe mobile phone’s menu operations. ( If the connection is failed, the Headset will beepand go back to music playing.)[Advance function][Advance function][Advance function][Advance function](ADVANCE FUNCTION)BluetoothBluetoothBluetoothBluetoothRemarks: Voice dialing function is not supported in Sony Ericsson K750iI. Stereo Headset paired with Bluetooth mobile phone Guide[A]1. Pairinga. While the Headset is powered off, press and button for 4 seconds. TheLED will flash red and green alternatively, which indicates the Headset inPairing Mode. The Pairing Mode will last for one minute.b. Follow the operating instructions of your mobile phone to start thepairing process. Typically, this has to be done by going to a setup or connectmenu and then selecting the options to discover devices. It may takeseveral seconds to establish a connection. Your phone’s displayshould indicate that it has found the model name “CS8076”; and prompt you fora passkey or PIN. Enter a sequence of “0000”.BluetoothBluetoothBluetoothholdUSB dongle[C]Bluetooth Bluetooth Audio Adaptor[B]Bluetooth mobile phone[A ]Bluetooth enabled PDA[D]BluetoothStereoHeadsetHow to open the folded headset and wear1)Unfold the folded headset until they are fully extended to the opened position(seeFigure.1 and Figure.2 )3)Wear the headset (see drawing Figure. 4) with the headband behind your head.Adjust the position until you feel the most comfort.2)Rotate the earcups until they are in the locked position (see drawing Figure.3)Figure. 1 . 2FigureFigure. 3Figure. 4!!BackwardReject the call!Voice dialing4.5.6. VOL +1.2.3. VOL -!!!!Power On/ OffPlayStopPairing!Volume down!!ForwardCall transfer!Redial the last number!LED!Volume upEnvironmentalfriendlyPLAY/STOPSeven possible User Scenarios:There are seven (7) user scenarios for you to enjoy the Bluetooth wireless convenience:Headset pairedwithYesYesYesYes[A]Bluetoothmobile phone(not supplied)YesYesYesYesYesYes[B]Audio Adaptor(supplied)[C]USB BluetoothDongle(not supplied)ScenarioVI Mobile phone calls and music from theaudio source (Notebook/Desktop PC, etc.)that the BT USB dongle is connected to.IMobile phone calls only.II Music only from the audio source (MP3,iPod, etc.) that the Audio Adaptor isconnected to.III Music only from the audio source(Notebook PC, desktop PC, etc.) that theBluetooth USB dongle is connected to.IV Music only from the PDA / mobile phone.VMobile phone calls and audio source(MP3, iPod, etc.) that the Audio Adaptor isconnected to.VII Mobile phone calls and music from thePDA / mobile phone.[D]Bluetooth enabledPDA / mobile phone.with A/V profile (notsupplied)++++++
8710 12911 13III. Stereo Headset paired with USB Bluetooth Dongle Guide[C]1. Pairinga. While the Headset is powered off, press and hold button for 4 seconds. TheLED will flash red and green alternatively, which indicates the Headset inPairing Mode. The Pairing Mode will last for one minute.b. Put the Headset, the USB dongle and the PC close to each other,c. Insert the USB Dongle into a USB port of your Notebook PC / desktopPC to start the pairing process. Typically, this has to be done by executing aapplication program supporting the Audio Visual (A/V) Profile, todiscover the Headset. It may take some time to search it depending on thenumber of devices nearby.0.5to 3 meters.d. Your PC will display the model name “CS8076” if it has found the Headset; andask for a passkey. Enter a sequence of “0000”. After successful pairing, followthe instructions to establish the connection with the Headset.e. If the pairing is successful, the LED will flash green, which indicates it is inStandby Mode and ready to receive audio signals from the dongle. If pairingdoes not occur as expected, turn the Headset and the PC off. Wait for 10seconds and repeat the pairing process from the beginning.2. Listening to musica. Put the earpiece on.b. Start a music application such as Windows Media Play or RealOne Player andplay the music; you will listen to the stereo music from the earpiece.c. The speaker volume of the earpiece can be adjusted by pressing the VOL + /VOL - buttons.d. While listening to music (for example, song 2), press the Headset’s FORWARD>> button will skip to next song (for example, song 3); press the BACKWARD <<button will replay the current song (for example, song 2). Double press theBACKWARD button will play the last song (for example, song 1). This remotecontrol function is supported only by the AVRCP profile of yourapplication program.e. Turn the Headset off after use.BluetoothBluetoothBluetoothBluetoothBluetoothBluetoothd. The speaker volume of the earpiece can be adjusted by pressing and releasingthe VOL + / VOL- buttons.e. Turn the Headset off after use. The Audio Adaptor will be turned offautomatically. Next time, you don’t need to pair them again. Turn them on, andthen they will be paired automatically and ready to transmit music from theaudio source.IV. Stereo Headset paired with Bluetooth enabled PDA Guide[D]1. Pairinga. While the Headset is powered off, press and hold button for 4 seconds. TheLED will flash red and green alternatively, which indicates the Headset in PairingMode. The Pairing Mode will last for one minute.b. Put the Headset and the enabled PDA (with A/V profile) close to eachother,c. Follow the operation instructions of your enabled PDA (with A/Vprofile) to start the pairing process. Typically, this has to be done by going to asetup or connect menu to discover the Headset. It may take some time to searchit depending on the number of devices nearby.d. Your PDA will display the model name “CS8076” if it has found the Headset; andask for a passkey. Enter a sequence of “0000”. After successful pairing, followthe instructions to establish the connection with the Headset.e. If the pairing is successful, the LED will flash green, which indicates it is inStandby Mode and ready to receive audio signals from the PDA. If pairing doesnot occur as expected, turn the Headset and the PDA off. Wait for 10 secondsand repeat the pairing process from the beginning.0.5 to 3 meters.2. Listening to musica. Put the earpiece on.b. Play the music on the PDA as normal; you will listen to the stereo music from theearpiece.c. The speaker volume of the earpiece can be adjusted by pressing the VOL+/VOL-buttons.d. While listening to music (for example, song 2), press the Headset’s FORWARD>> button will skip to next song (for example, song 3); press the BACKWARD <<button will replay the current song (for example, song 2). Double press theBACKWARD button will play the last song (for example, song 1). This remotecontrol function is supported only by the AVRCP profile of your Bluetoothapplication program.e. Turn the Headset off after use.BluetoothBluetoothBluetoothBluetoothAdvance functions: The following user scenarios provide you a truewireless freedom to monitor the mobile phone call status while youare enjoying stereo music at the same time. You don't even need toputdownyourearpiece.V. Stereo Headset paired withAudio Adaptor and Bluetooth mobile phone Guide[A&B]1. Pairinga. Follow the Pairing process [ B ] to pair the Headset and the Audio Adaptor.b. After successful pairing, turn the Headset off. The Audio Adaptor will turn offautomatically.C. Follow the pairing process [ A ] to pair the Headset and the mobilephone.d. After successful pairing, turn on the Audio Adaptor.e. All three devices are in Standby Mode and the LED’s should flash green.2. Listening to musica. Follow the Listen to music process [ B ] to enjoy the music.3. Monitoring mobile phone callsa. Follow the ] in [ A ] to monitor phone calls.Bluetooth[Advance functionBluetooth Audio Adaptor[B] Bluetooth mobile phone[A]BluetoothStereo Headset* Advance functions are not supported in Sony Ericsson T610, T630VII. Stereo Headset paired withBluetooth enabled PDA and Bluetooth mobile phone Guide[A&D]1. Pairinga. Follow the Pairing process [ D] to pair the Headset and the enabled PDA.b. After successful pairing, turn the Headset off.c. Follow the pairing process [ A ] to pair the Headset and the mobilephone.d. After successful pairing, please follow the PDA application programinstructions to re-establish connection between the PDA and theHeadset.e. All three devices are in Standby Mode and the LED’s should flash green.2. Listening to musica. Follow the Listen to music process [ D ] to enjoy the music.3. Monitoring mobile phone callsa. Follow the in [ A ] to monitor phone calls.BluetoothBluetoothBluetoothBluetooth[Advance function]Accessories Table DescriptionA/C Switching AdaptorStatusProvidedUSB Charging cable OptionalBluetooth mobile phone[A]Bluetooth enabled PDA[D]BluetoothStereo HeadsetVI. Stereo Headset paired withUSB Bluetooth dongle and Bluetooth mobile phone Guide[A&C]1. Pairinga. Follow the Pairing process [ C ] to pair the Headset and the USBdongle.b. After successful pairing, turn the Headset off.c. Follow the pairing process [ A ] to pair the Headset and the mobilephone.d. After successful pairing, please follow the PC application programinstructions to re-establish the connection between thedongle and the Headset.e. All three devices are in Standby Mode and the LED’s should flash green.2. Listening to musica. Follow the Listen to music process [ C ] to enjoy the music.3. Monitoring mobile phone callsa. Follow the in [ A ] to monitor phone callsBluetoothBluetoothBluetoothBluetooth Bluetooth[Advance function]USB dongle[C]Bluetooth Bluetooth mobile phone[A]BluetoothStereo HeadsetII. Stereo Headset paired with Stereo Audio Adaptor Guide[B]1. Pairinga. While the Headset is powered off, press and hold button for 4 seconds. TheLED will flash red and green alternatively, which indicates the Headset inPairing Mode. The Pairing Mode will last for one minute.b. While the Stereo Audio Adaptor is powered off, press and hold button. TheLED will flash red and green alternatively, which indicates the Audio Adaptor isin Pairing Mode. The Pairing Mode will last for one minute.c. Put the Headset and the Audio Adaptor close to each other, 0.5 to 3 meters.After a few seconds, their LED’s will turn into flashing green, which indicatessuccessful pairing. Both units are in Standby Mode and ready to transmit audiosignal, or music from the audio source.2. Listening to musica. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mmsocket of any audio source such as iPod, MP3, CD player, Notebook PC, orothers.b. Put the earpiece on.c. Play the music on the audio source as normal; you will listen to the stereo musicfrom the earpiece.7. Transfer calla. To transfer a call from the Headset to your mobile phoneIf the mobile phone is enabled with the Hands-free profile, press the buttonwhile the call is in session and it will be transferred to your mobile phone.If the mobile phone is enabled with the Headset profile, follow the instructionsof your mobile phone manual to do call transfers.b. To transfer a call from your mobile phone to the HeadsetFollow the instructions of the mobile phone manual to do call transfers!!!Backward ForwardVolumeupVolumedown++++Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ofthe following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved bythe party responsible for compliance could void the user's authority tooperate this equipment.This equipment complies with FCC radiation exposure limits set forthfor an uncontrolled environment. End users must follow the specificoperating instructions for satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction withany other antenna or transmitter.IMPORTANT NOTE:FCC Radiation Exposure Statement:To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu