Intech Electronics CS8082 Bluetooth Audio Adaptor User Manual MCB 8076010 0A MANUAL FOR 8
In Tech Electronics Ltd Bluetooth Audio Adaptor MCB 8076010 0A MANUAL FOR 8
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 669103 |
| Application ID | MgEfhm8kT/N9G9NZbZD9jw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 53.88kB (673529 bits) |
| Date Submitted | 2006-06-15 00:00:00 |
| Date Available | 2006-06-15 00:00:00 |
| Creation Date | 2006-05-17 12:27:40 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2006-06-14 18:21:24 |
| Document Title | MCB-8076010-0A(# MANUAL FOR 8... |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | lucytang |
Audio Adaptor PLAY/STOP LED Bluetooth enabled PDA [D] DC Socket AC Adaptor CS8076 Bluetooth Stereo Headset and CS8082 Bluetooth Audio Adaptor User Manual 1. ! Backward ! Reject the call ! Voice dialing 2. Power On/ Off Play Stop Pairing 3. VOL ! Volume down 4. ! Forward ! Call transfer ! Redial the last number Headset Low-battery indication When the battery is low, the LED of the Headset or that of the Audio Adaptor will flash red instead of green. When the battery level is too low, the Headset or the Audio Adaptor will automatically power off. Turning on / Turning off the Headset and the Audio Adaptor When the Headset or the Audio Adaptor is powered off, press and hold button till the LED flashes green, which indicates the Headset or the Audio Adaptor is powered up. When the Headset or the Audio Adaptor is powered up, press and hold button , the LED will keep red for a while then off, which indicates it is powered down. 5. ! LED 6. VOL + ! Volume up How to open the folded headset and wear Figure. 1 Figure . 2 c. If the pairing is successful, the LED will flash green, which indicates it is in Standby Mode and ready to answer and receive mobile phone calls from it. If pairing does not occur as expected, turn the Headset and the mobile phone off. Wait for 10 seconds and repeat the pairing process from the beginning. 2. Answering incoming calls / Rejecting incoming calls a. When an incoming call is present, a ring tone will be heard from the earpiece of the Headset. Press PLAY button will answer the call. Press button will reject the call. b. [Advance function] If the Headset is connected with your mobile phone and another Bluetooth transmitter such as the Audio Adaptor simultaneously and you are listening to the music using the earpiece, a ring tone will prompt you. Press PLAY button will answer the call. Press button will reject the call and you will continue listening to the music. [B] Audio Adaptor (supplied) Seven possible User Scenarios: Headset paired with [A] Bluetooth mobile phone (not supplied) Yes [C] USB Bluetooth Dongle (not supplied) [D] Bluetooth enabled PDA / mobile phone. with A/V profile (not supplied) There are seven (7) user scenarios for you to enjoy the Bluetooth wireless convenience: Mobile phone calls only. Scenario Yes Yes Music only from the audio source (MP3, iPod, etc.) that the Audio Adaptor is connected to. Yes Yes FCC Interference Statement ..................................................................................13 Charging and recharging the battery Thank you for buying the new CS8076 Bluetooth Stereo Headset and the new CS8082 Bluetooth Stereo Audio Adaptor pack. Before first time use, it is important to charge the battery of each of them for 6 hours. During recharging, the LED shows a steady red light. When the battery is fully charged, the Red LED is off. Yes Accessories Table ................................................................................................12 Figure. 4 II VI. Stereo Headset paired with USB ........................11 Bluetooth dongle and Bluetooth mobile phone Guide [ A & C ] 1. Pairing ...............................................................................................................11 2. Listening to music ..............................................................................................11 3. Monitoring mobile phone calls ...........................................................................11 VII. Stereo Headset paired with Bluetooth enabled PDA and Bluetooth mobile phone Guide [ A & D ] ...............12 1. Pairing ...............................................................................................................12 2. Listening to music .............................................................................................12 3. Monitoring mobile phone calls ...........................................................................12 III M u s i c o n l y f r o m t h e a u d i o s o u r c e (Notebook PC, desktop PC, etc.) that the Bluetooth USB dongle is connected to. Stereo Pendant paired with Audio Adaptor and .. Bluetooth mobile phone Guide [ A & B ] ...........................................................10 1. Pairing ...............................................................................................................10 2. Listening to music .............................................................................................10 3. Monitoring mobile phone calls ............................................................................10 IV Music only from the PDA / mobile phone. V. Yes Stereo Headset paired with Bluetooth enabled PDA Guide [ D ] ....................9 1. Pairing .................................................................................................................9 2. Listening to music ...............................................................................................9 Yes IV. Yes Stereo Headset paired with USB Bluetooth Dongle Guide [ C ] ......................8 1. Pairing .................................................................................................................8 2. Listening to music ...............................................................................................8 Yes III. 3)Wear the headset (see drawing Figure. 4) with the headband behind your head. Adjust the position until you feel the most comfort. Mobile phone calls and audio source (MP3, iPod, etc.) that the Audio Adaptor is connected to. Stereo Headset paired with Stereo Audio Adaptor Guide [ B ] ........................7 1. Pairing .................................................................................................................7 2. Listening to music ...............................................................................................7 II. Figure. 3 VI Mobile phone calls and music from the audio source (Notebook/Desktop PC, etc.) that the BT USB dongle is connected to. ...................................................................................4 VII Mobile phone calls and music from the PDA / mobile phone. 2)Rotate the earcups until they are in the locked position (see drawing Figure.3) Stereo Headset paired with Bluetooth mobile phone Guide [ A ]..............5 1. Pairing ....................................................................................................5 2. Answering incoming calls / Rejecting incoming calls ................................6 3. Ending calls .......................................................................................................6 4. Last number redial ...............................................................................................6 5. Adjusting speaker volume .......................................................................6 6. Activating voice dialing ..........................................................................................6 7. Transfer call ........................ .................................................................7 1． How to open the folded headset and wear ..........................................................1 2． Charging and recharging the battery ....................................................................2 3. Low-battery indication .................................................................................................3 4. Turning on / Turning off the Headset and the Audio Adaptor ...............................3 I. Bluetooth Audio Adaptor [B] 1. Pairing a. While the Headset is powered off, press and hold button for 4 seconds. The LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The Pairing Mode will last for one minute. b. Follow the operating instructions of your Bluetooth mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth devices. It may take several seconds to establish a Bluetooth connection. Your phone’s display should indicate that it has found the model name “CS8076”; and prompt you for a passkey or PIN. Enter a sequence of “0000”. Seven possible User Scenarios USB Bluetooth dongle [C] I. [ A ] Stereo Headset paired with Bluetooth mobile phone Guide Http://www.abe-hk.com Index Bluetooth Stereo Headset 1)Unfold the folded headset until they are fully extended to the opened position(see Figure.1 and Figure.2 ) Environmental friendly Bluetooth mobile phone [A ] CS8082 Bluetoot h Stereo Audio Adaptor 3. Ending calls a. While a call is in session, press button will end the call. b. [Advance function] If the Headset is connected with your mobile phone and another Bluetooth transmitter such as the Audio Adaptor simultaneously, press STOP button will end the call and you will continue listening to the music. 4. Last number redial a. While the Headset and Bluetooth mobile are in Standby Mode, press and hold the button for 2 second to redial the last dialed number. b. [Advance function] If the Headset is connected with your mobile phone and another Bluetooth transmitter such as the Audio Adaptor, press and hold the Button for 2 second to redial the last dialed number. Press STOP button to end the call as normal. 5. Adjusting speaker volume a. While a call is in session, pressing and releasing VOL + / VOL - buttons will adjust the speaker volume. b. [Advance function] While the Headset is playing music, pressing / releasing VOL+ / VOL - buttons will adjust the speaker volume. 6. Activating voice dialing When the Headset is in standby mode, press and hold the button for 2 seconds until a long beep is heard. The Headset is connecting to your mobile phone for voice dialing function. If the connection is successfully made, the phone will ask for the name of the person you wish to call. The call will be executed in a few seconds. If the connection is failed, the Headset will beep and go back to standby mode. Before the Headset entering into voice dialing mode, make sure the voice dialing function of the phone is enabled. (ADVANCE FUNCTION) While the Headset is playing the music, continuously pressing the button will stop the music playing and a long beep will be heard, indicating that the Headset is connecting with mobile phone for voice dialing function. If the connection is successfully made, the voice dialing can be executed according to the mobile phone’s menu operations. ( If the connection is failed, the Headset will beep and go back to music playing.) Remarks: Voice dialing function is not supported in Sony Ericsson K750i 7. Transfer call a. To transfer a call from the Headset to your mobile phone ! If the mobile phone is enabled with the Hands-free profile, press the button while the call is in session and it will be transferred to your mobile phone. ! If the mobile phone is enabled with the Headset profile, follow the instructions of your mobile phone manual to do call transfers. b. To transfer a call from your mobile phone to the Headset ! Follow the instructions of the mobile phone manual to do call transfers Volume up Backward Forward Volume down II. [ B ] Stereo Headset paired with Stereo Audio Adaptor Guide 1. Pairing a. While the Headset is powered off, press and hold button for 4 seconds. The LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The Pairing Mode will last for one minute. b. While the Stereo Audio Adaptor is powered off, press and hold button. The LED will flash red and green alternatively, which indicates the Audio Adaptor is in Pairing Mode. The Pairing Mode will last for one minute. c. Put the Headset and the Audio Adaptor close to each other, 0.5 to 3 meters. After a few seconds, their LED’s will turn into flashing green, which indicates successful pairing. Both units are in Standby Mode and ready to transmit audio signal, or music from the audio source. IV. [ D ] Stereo Headset paired with Bluetooth enabled PDA Guide 1. Pairing a. While the Headset is powered off, press and hold button for 4 seconds. The LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The Pairing Mode will last for one minute. b. Put the Headset and the Bluetooth enabled PDA (with A/V profile) close to each other, 0.5 to 3 meters. c. Follow the operation instructions of your Bluetooth enabled PDA (with A/V profile) to start the pairing process. Typically, this has to be done by going to a setup or connect menu to discover the Headset. It may take some time to search it depending on the number of Bluetooth devices nearby. d. Your PDA will display the model name “CS8076” if it has found the Headset; and ask for a passkey. Enter a sequence of “0000”. After successful pairing, follow the instructions to establish the Bluetooth connection with the Headset. e. If the pairing is successful, the LED will flash green, which indicates it is in Standby Mode and ready to receive audio signals from the PDA. If pairing does not occur as expected, turn the Headset and the PDA off. Wait for 10 seconds and repeat the pairing process from the beginning. 2. Listening to music a. Put the earpiece on. b. Play the music on the PDA as normal; you will listen to the stereo music from the earpiece. c. The speaker volume of the earpiece can be adjusted by pressing the VOL+/ VOL - buttons. d. While listening to music (for example, song 2), press the Headset’s FORWARD >> button will skip to next song (for example, song 3); press the BACKWARD << button will replay the current song (for example, song 2). Double press the BACKWARD button will play the last song (for example, song 1). This remote control function is supported only by the AVRCP profile of your Bluetooth application program. e. Turn the Headset off after use. VI. [ A & C ] Stereo Headset paired with USB Bluetooth dongle and Bluetooth mobile phone Guide USB Bluetooth dongle [C] Bluetooth Stereo Headset Bluetooth mobile phone [A] 1. Pairing a. Follow the Pairing process [ C ] to pair the Headset and the USB Bluetooth dongle. b. After successful pairing, turn the Headset off. c. Follow the pairing process [ A ] to pair the Headset and the Bluetooth mobile phone. d. After successful pairing, please follow the PC Bluetooth application program instructions to re-establish the Bluetooth connection between the Bluetooth dongle and the Headset. e. All three devices are in Standby Mode and the LED’s should flash green. 2. Listening to music a. Follow the Listen to music process [ C ] to enjoy the music. 3. Monitoring mobile phone calls a. Follow the [Advance function] in [ A ] to monitor phone calls d. The speaker volume of the earpiece can be adjusted by pressing and releasing the VOL + / VOL- buttons. e. Turn the Headset off after use. The Audio Adaptor will be turned off automatically. Next time, you don’t need to pair them again. Turn them on, and then they will be paired automatically and ready to transmit music from the audio source. 11 Advance functions: The following user scenarios provide you a true wireless freedom to monitor the mobile phone call status while you are enjoying stereo music at the same time. You don't even need to put down your earpiece. [ C ] Stereo Headset paired with USB Bluetooth Dongle Guide 1. Pairing a. While the Headset is powered off, press and hold button for 4 seconds. The LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The Pairing Mode will last for one minute. b. Put the Headset, the USB Bluetooth dongle and the PC close to each other, 0.5 to 3 meters. c. Insert the USB Bluetooth Dongle into a USB port of your Notebook PC / desktop PC to start the pairing process. Typically, this has to be done by executing a Bluetooth application program supporting the Audio Visual (A/V) Profile, to discover the Headset. It may take some time to search it depending on the number of Bluetooth devices nearby. d. Your PC will display the model name “CS8076” if it has found the Headset; and ask for a passkey. Enter a sequence of “0000”. After successful pairing, follow the instructions to establish the Bluetooth connection with the Headset. e. If the pairing is successful, the LED will flash green, which indicates it is in Standby Mode and ready to receive audio signals from the dongle. If pairing does not occur as expected, turn the Headset and the PC off. Wait for 10 seconds and repeat the pairing process from the beginning. VII. [ A & D ] Stereo Headset paired with Bluetooth enabled PDA and Bluetooth mobile phone Guide 2. Listening to music a. Put the earpiece on. b. Start a music application such as Windows Media Play or RealOne Player and play the music; you will listen to the stereo music from the earpiece. c. The speaker volume of the earpiece can be adjusted by pressing the VOL + / VOL - buttons. d. While listening to music (for example, song 2), press the Headset’s FORWARD >> button will skip to next song (for example, song 3); press the BACKWARD << button will replay the current song (for example, song 2). Double press the BACKWARD button will play the last song (for example, song 1). This remote control function is supported only by the AVRCP profile of your Bluetooth application program. e. Turn the Headset off after use. Bluetooth enabled PDA [D] V. [ A & B ] Stereo Headset paired with Audio Adaptor and Bluetooth mobile phone Guide Bluetooth Stereo Headset Bluetooth mobile phone [A] 1. Pairing a. Follow the Pairing process [ D] to pair the Headset and the Bluetooth enabled PDA. b. After successful pairing, turn the Headset off. c. Follow the pairing process [ A ] to pair the Headset and the Bluetooth mobile phone. d. After successful pairing, please follow the PDA Bluetooth application program instructions to re-establish Bluetooth connection between the PDA and the Headset. e. All three devices are in Standby Mode and the LED’s should flash green. 2. Listening to music a. Follow the Listen to music process [ D ] to enjoy the music. Bluetooth Audio Adaptor [B] Bluetooth Stereo Headset Bluetooth mobile phone [A] 1. Pairing a. Follow the Pairing process [ B ] to pair the Headset and the Audio Adaptor. b. After successful pairing, turn the Headset off. The Audio Adaptor will turn off automatically. C. Follow the pairing process [ A ] to pair the Headset and the Bluetooth mobile phone. d. After successful pairing, turn on the Audio Adaptor. e. All three devices are in Standby Mode and the LED’s should flash green. 3. Monitoring mobile phone calls a. Follow the [Advance function] in [ A ] to monitor phone calls. Accessories Table Description Status A/C Switching Adaptor Provided USB Charging cable Optional 2. Listening to music a. Follow the Listen to music process [ B ] to enjoy the music. 3. Monitoring mobile phone calls a. Follow the [Advance function ] in [ A ] to monitor phone calls. 10 12 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 13 * Advance functions are not supported in Sony Ericsson T610, T630 III. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: IMPORTANT NOTE: FCC Radiation Exposure Statement: To maintain compliance with FCCwith RF exposure complianceexposure requirements, pleaseset follow This equipment complies FCC radiation limits forth operation instruction as documented in this manual. for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. Listening to music a. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mm socket of any audio source such as iPod, MP3, CD player, Notebook PC, or others. b. Put the earpiece on. c. Play the music on the audio source as normal; you will listen to the stereo music from the earpiece. Federal Communication Commission Interference Statement
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2006:06:14 18:21:24+08:00 Create Date : 2006:05:17 12:27:40+08:00 Page Count : 2 About : uuid:11e06991-4cd8-4c9a-8caa-b944eda25399 Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2006:05:17 12:27:40+08:00 Mod Date : 2006:06:14 18:21:24+08:00 Author : lucytang Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2006:06:14 18:21:24+08:00 Document ID : uuid:baed6029-dd75-471f-8656-c4a9b57e9fa7 Format : application/pdf Title : MCB-8076010-0A(# MANUAL FOR 8... Creator : lucytang Has XFA : NoEXIF Metadata provided by EXIF.tools