Intech Electronics CS8106 Bluetooth Car Kit User Manual CS8106 20070228

In Tech Electronics Ltd Bluetooth Car Kit CS8106 20070228

Manual

EnvironmentalfriendlyUser Manual1Table of Contents1. BT77AD profile and its functions..........................................31.1. Profile.................................................................................32 How to set up the BT77AD....................................................43. How to mount the BT77AD in the car...................................44. LCD Display status ..............................................................64.1. On / Off and Pairing..............................................................64.2. Calling in.............................................................................84.3. Calling out..........................................................................94.4 On Line...............................................................................104.5 Battery charging.................................................................125 . .................................................146. ...........................................................................147. ..............................................................158. ..........................................16Maintenance and Safe UseElectricalPackage ContentsFederal Interference Statement23LD77ABT 77ADLCD SOCKETLCD plugNote: BT77AD is an optional feature .Always avoid contact with humidity or heavy soiling.Any use other than the one described above will damage the product. Moreover,there is a danger, for example, short-circuits, fire, electric shock, etc. No part ofthe product must be modified or rebuilt and the housing must not be opened!Observe the safely instructions at all times!All company names and product designations contained herein are trademarks ofthe respective owners. All rights reserved.41. 77A profile and its functionsBT1.1. Profile(Fig.1)2Phone 1 icon Phone 2 icon 3Mute icon4Battery icon16Metal Standwith 2-side tape5LCD plug(BT77AD )Fig. 152 HowtosetuptheBT77ADInsert fully the LCD plug into the LCD socket of BT 77AD before the Carkit is turnedon. (please refer to figure 2-3.)3.How to mount the BT77AD in the carUse the Alcohol Pad to clean the surface of a desired position on the top of thedashboard.●●●●Use the 2-side tape to attach the metal stand on the cleaned area.Put the BT77AD into an appropriate position(Refer to Fig.4)Slide the LCD to the metal stand.61.Attach the metal stand to the desiredposition.BT77AD2.Place the BT77AD on the sun visor.3.Slide the LD77A LCD display into themental stand.DashboardMetal StandBT77ADUNITWindshieldAirsuckersLD77A74. LCD Display statusWhen the LCD Display unit is properly connected to a Car Kit,it will provide youwith the status of the Car Kit’s operations. For detailed operations, pleaserefer to the appropriate user manuals.4.1. On / Off and PairingCar KitAfter the car kit has been poweredon, it will stay on idle. Before it isconnected to the mobile phone,theLCD screen displays “READY”.When the Car Kit is in pairing mode,the LCD screen displays “PAIRING”S1 S3 S3S4S1 S3 S3S48While the car kit is connecting to themobile phone, the LCD screen disp-lays “CONNECTING .”After the car kit has connected to themobile phone successfully, the LCDscreen displays “CONNECTED”.If you press the ON / OFF key for about5 seconds to turn off the car kit,the LCDscreen displays“OFF for a few secondsbefore it is completely off.”S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4Fig. 2LCD Only( )Car Charger Only()Fig. 3Fig. 4The backlight will be on automatically for 10 seconds when there is an incoming call orwhen any key operations are performed directly from the car kit.key operations are performed from the mobile phones.Note that the backlightwill not be turned on whenTMBluetooth Handsfree Car Kitwith LCD Display®CS8106(BT77AD)Abe/CS81064.2. Calling inWhen there is an incoming call, the LCDscreen displays “RINGING”, or its callerID, if it is received.Note: Some mobile phones may notdisplay Caller ID via this LCD Displayunit.When the call is answered, the LCDscreen displays“ON LINE”.If the call is rejected, it will go back toidle state and the LCD screen displays“CONNECTED”.Or Caller IDS1 S3 S3S4S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4CS8106 / Abe
104.3. Calling outWhen there is an outgoing call from themobile phone, the LCD screen displays“CALLING”.When the call is made successfully, theLCD screen displays “ON LINE”.S1 S3 S3S4S1 S3 S3S411When you are talking on line, the LCDscreen displays “ON LINE”.Whenever the Volume Up key or VolumeDown key is pressed, the LCD screendisplays “ VOL ” and the current volumesetting for 2 seconds.4.4 On LineS1 S3 S3S4S1 S3 S3S4If you mute the microphone, the muteicon will be turned on. And it stays onuntil you cancel it.S1 S3 S3S41213Battery Low: Battery icon appears.4.5 Battery chargingFully Charged during Power On: Batteryicon disappears.S1 S3 S3S4S1 S3 S3S4Recharging during Power On: Batteryicon flashes.14Recharging during Power Off: Batteryicon flashes.Fully Charged during Power Off: Batteryicon disappears.S1 S3 S3S4S1 S3 S3S49When the call is ended, it will go back tothe idle state. The LCD screen displays“CONNECTED”.When there is another call incomingwhile you are on line, the LCD screenwill show“CALL WAITING”or its CallerID,ifitisreceived.Note: Some mobile phones may notdisplay “CALL WAITING” or Caller IDvia this LCD Display unit.Or Caller IDS1 S3 S3S4S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4Abe/CS8106TM5. Maintenance and Safe UseElectrical Power Specification of Car Charger / AC Power Adaptor for BT77AUse dry cloth to clean hands-free Car Kit!Recycle the batteries after their life time!Do not expose the Car Kit to liquid or moisture!Do not expose the Car Kit to fire or open flames!The electrical power specification of car charger / AC adaptor for BT 77ABluetooth Car Kit is as follows:Output: 5V 1.0AOutput pin configuration:◎◎◎◎.65V 1.0ANCGround2.5mm11 0.5mm7. Package ContentsAccessories Status3 x AAARechargeable BatteriesProvidedProvided1 Car ChargerxWarning: Use only rechargeable batteries.1516Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate thisequipment.----IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.Disclaimer:Talk time and stand-by time of the Car Kit will vary depending onmobile phone model being used.Note:BQB, CE and FCC approveThe word mark and logos are owned by the SIG, Inc. andany use of such marks by In-Tech Electronics Ltd. is under license. Othertrademarks and trade names are those of their respective owners.BluetoothBluetooth BluetoothdBluetooth functions and operations may not be available or may vary dependingon different mobile phones.17

Navigation menu