Intech Electronics CS8110 Bluetooth Car Kit User Manual BT70PD 20070202 2

Download:
Mirror Download [FCC.gov]
Document ID	764272
Application ID	WAZ5/cdzeaX0L58Z4h3AcA==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	113.84kB (1423023 bits)
Date Submitted	2007-03-02 00:00:00
Date Available	2007-03-02 00:00:00
Creation Date	2007-02-02 17:41:39
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-03-01 18:01:02
Document Title	BT70PD 20070202-2.cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	lucytang

CS8110Y2R / Abe
TM
1. BT70PD profile and its functions
1.1. Profile(Fig.1)
LD 77A
LCD Display for Cigarette Plug
and Visor type Car Kit For
While the car kit is connecting to the
mobile phone, the LCD screen displays “CONNECTING ” .
S4
S1
S3
S3
S1
S3
S3
S1
S3
S3
7 Battery icon
Mic
6 Metal Stand
1 Built-in Microphone
S4
with 2-side tape
(for BT70PD and
BT70RD only)
CS8110Y2R (BT70PD)
After the car kit has connected to the
mobile phone successfully, the LCD
screen displays “CONNECTED”.
2 Phone 1 icon
3 Phone 2 icon
If you press the ON / OFF key for about
5 seconds to turn off the car kit,the LCD
screen displays“OFF”for a few seconds
before it is completely off.
4 Mute icon
S4
Fig. 1
The backlight will be on automatically for 10 seconds when there is an incoming call or
when any key operations are performed directly from the car kit. Note that the backlight
will not be turned on when key operations are performed from the mobile phones.
User Manual
2.How to mount the BT70PD in the car
●
Environmental
friendly
●
●
●
1.Attach the metal stand to the desired
position.
When there is an incoming call, the LCD
screen displays “RINGING”, or its caller
ID, if it is received.
BT70RD profile and its functions..........................................3
2.
How to mount the BT70PD in the car ....................................5
LCD Display status ..............................................................5
3 .1. On / Off and Pairing..............................................................5
Note: Some mobile phones may not
display Caller ID via this LCD Display
unit.
On Line.................................................................... ............9
Federal Communication Commission Interference Statement...11.12
S3
S4
S1
S3
S3
S1
S3
S3
S1
S3
S3
When the call is answered, the LCD
screen displays“ON LINE”.
3.3. Calling out.......................................................................... 8
4.
S3
2.Put the BT70PD/BT70RD into the Cigarette
Socket.
3 .2. Calling in.............................................................................7
3 .4
S4
S1
Or Caller ID
1.1. Profile..................................................................................3
3.
3.2. Calling in
BT70PD
Table of Contents
1.
Use the Alcohol Pad to clean the surface of a desired position on the top of the
dashboard.
Use the 2-side tape to attach the metal stand on the cleaned area.
Put the BT70PD into an appropriate position(Refer to Fig.4)
Slide the LCD to the metal stand.
If the call is rejected, it will go back to
idle state and the LCD screen displays
“CONNECTED”.
3.Slide the LCD77A LCD display into the
metal stand.
S4
S4
Fig. 4
LCD Display for Cigarette Plug and Visor types of Car Kits
3. LCD Display status
When the LCD Display unit is properly connected to a Car Kit,it will provide you
with the status of the Car Kit’s operations. For detailed operations, please
refer to the appropriate Car Kit user manuals.
Thank you for using LD 77A LCD Display unit. This LCD Display unit is designed to
be an optional accessory to BT 77AD Visor type car kit and a standard feature of
BT 70PD and BT70RD Cigarette Plug type car kits. It provides useful information
of the car kits including Caller ID of incoming calls and other operational status.
3 .1. On / Off and Pairing
Volume up
After the car kit has been powered
on, it will stay on idle. Before it is
connected to the mobile phone,the
LCD screen displays “READY”.
S4
S1
S3
3.3. Calling out
When there is an outgoing call from the
mobile phone, the LCD screen displays
“CALLING”.
S4
S1
S3
S3
S1
S3
S3
S3
Phone
Mic
Volume Down
When the call is made successfully, the
LCD screen displays “ON LINE”.
When the Car Kit is in pairing mode,
the LCD screen displays “PAIRING”
S4
S4
S1
S3
S3
CS8110Y2R
Note: LD 77A is a standard feature for BT 70PD and BT70RD.
Abe / CS8110Y2R (BT70PD)
TM
IMPORTANT
NOTE:
IMPORTANT NOTE:
FCC Radiation
Radiation Exposure
FCC
ExposureStatement:
Statement:
This equipment
equipment complies
complies with
This
with FCC
FCC radiation
radiationexposure
exposurelimits
limitsset
setforth
forthforforanan
uncontrolled environment. End users must follow the specific operating
uncontrolled
environment.
This
equipment
should
be
installed
and
operated
instructions for satisfying RF exposure compliance.
with
distance20cmbetween
theorradiator
& your
body.
Thisminimum
transmitter
must not be co-located
operating
in conjunction
with any
This
not be co-located or operating in conjunction with any
othertransmitter
antenna ormust
transmitter.
other antenna or transmitter.
3.4 On Line
When you are talking on line, the LCD
screen displays “ON LINE”.
S4
Whenever the Volume Up key or Volume
Down key is pressed, the LCD screen
displays “ VOL ” and the current volume
setting for 2 seconds.
If you mute the microphone, the mute
icon will be turned on. And it stays on
until you cancel it.
S1
S3
S3
S1
S3
S3
S1
S3
S3
S4
S4
When there is another call incoming
while you are on line, the LCD screen
will show“CALL WAITING”or its Caller
ID, if it is received.
12
S4
S1
S3
S3
Or Caller ID
Note: Some mobile phones may not
display “CALL WAITING” or Caller ID
via this LCD Display unit.
When the call is ended, it will go back to
the idle state. The LCD screen displays
“CONNECTED”.
S4
S1
S3
S3
S1
S3
S3
S4
10
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
To which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
Abe / CS8110Y2R (BT70PD)
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
About                           : uuid:239aef4b-8381-436f-8005-3d23954d913d
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:03:01 18:01:02+08:00
Create Date                     : 2007:02:02 17:41:39+08:00
Metadata Date                   : 2007:03:01 18:01:02+08:00
Document ID                     : uuid:648b4fd3-c8a8-4167-8816-b8d0b547e042
Instance ID                     : uuid:c6357eea-ab3c-4806-a4ef-97ef99bd6e29
Format                          : application/pdf
Title                           : BT70PD 20070202-2.cdr
Creator                         : lucytang
Has XFA                         : No
Page Count                      : 2
Author                          : lucytang

EXIF Metadata provided by EXIF.tools