Intech Electronics CS8136 Bluetooth FM Handsfree Kit User Manual MCB 8136

Download:
Mirror Download [FCC.gov]
Document ID	1045429
Application ID	9T/C0nKLTXuqOfBib5Cn/Q==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	107.59kB (1344828 bits)
Date Submitted	2008-12-17 00:00:00
Date Available	2008-12-17 00:00:00
Creation Date	2008-12-17 14:52:14
Producing Software	Corel PDF Engine Version 1.0.0.458
Document Lastmod	0000-00-00 00:00:00
Document Title	MCB-8136.cdr
Document Creator	CorelDRAW Version 12.0
Document Author:	intech

315mm
1-2. Main icons on LCD display
3.
Battery charging
Before turn on the unit, please make sure the battery is fully charged. You can connect
the charging cable of car charger provided to cigarette lighter socket to charge the
battery. During charging, the battery icon
on LCD will flash. When the battery is fully
charged, the battery icon will show full mark
4.
Low-battery indication
When the battery is low, battery icon will show
on LCD display. Low battery warning
tones are also heard every minute during conversation. When the battery level is too
low, the unit will power off automatically.
5.
Power the Bluetooth FM Handsfree Kit
Slide the power switch to “on” / “off” position to turn on/off the unit.
6.
Pairing mobile phone with Bluetooth FM Handsfree Kit
NV6-CS8136
Bluetooth FM Handsfree Kit
CS8136
User Manual
FM Frequency
Mic mute
FM Memory
Music playing
Preset FM Channel P1-P5
Bluetooth
Conversation
Battery status
6-1 Establish Bluetooth Link
a. When the Bluetooth FM Handsfree is powered off, press and hold the “Mute
”
key and then slide the power switch to “on” position. Release the “Mute
” key
when the LCD shows “Pairing” figure as below.
Environmental
friendly
The pairing mode will last for three minutes.
Index
2. How to install the Bluetooth FM Handsfree Kit
2-1. Install mounting stand to mounting bracket
Profile..............................................................................................................1
How to install the Bluetooth FM Handsfree Kit......................................................3
Battery charging....................................…….....................................................5
Low-battery indication.........................…………..................................................5
Power the Bluetooth FM Handsfree Kit...............................................................5
Pairing mobile phone with Bluetooth FM Handsfree Kit.........................................5
1.
2.
3.
4.
5.
6.
6-1.
6-2.
6-3.
6-4.
6-5.
6-6.
6-7.
6-8.
6-9.
Mounting
stand
Establish Bluetooth Link........................................................................................5
Answering incoming calls / Rejecting incoming calls................................................ 7
Ending calls......................................................................................................... 8
Transfer Call (Voice Transfer)................................................................................8
Adjust volume...................................................................................................... 8
Last number redial................................................................................................8
Voice dial.............................................................................................................9
Microphone mute..................................................................................................9
Call waiting.......................................................................................................... 9
7. Play and pause the music...................................................................................9
8. Play next song................................................................................................10
9. Play previous song..........................................................................................10
10. No network signal alert....................................................................................10
11. Transfer signal from Bluetooth FM Handsfree Kit to car radio system....................10
12. FM frequency direct tunning.............................................................................11
13. FM frequency memory programming.................................................................11
14. Preset channel recalling..................................................................................12
15. FM frequency auto scan..................................................................................13
16. FM main power auto off...................................................................................13
17. Connection between Bluetooth FM Handsfree Kit with music players.................13
18. Accessories....................................................................................................14
Federal Communication Commission Interference Statement....................................15
Mounting
bracket
2-2. Slide the knob to lock the Stand and Bracket
c.
If the pairing is successful, the pairing result is indicated on the mobile phone menu. If
pairing does not occur as expected, turn the unit and the mobile phone off. Wait for about
10 seconds and repeat the pairing process from the beginning.
d.
After pairing, some mobile phones will auto connected with the unit. If not, please
following the mobile phone menu to connect the unit after pair. Bluetooth FM Handsfree
Kit will display icon on LCD after successful bluetooth connection.
e.
Auto re-connection to Bluetooth device
When the unit is off, turning on the unit will automatically reconnect to the last connected
device. If the Bluetooth FM Handsfree Kit is on and disconnected with last connected
device, press MFB button shortly to reconnect the link again. If abnormal loss of link is
happened (e.g. out of reach range), the unit will automatically try to reconnect the mobile
phone.
Knob
2-3. Stick the mounting stand to dashboard
Profile (Fig.1)
1-1
Follow the operating instructions of your Mobile phone to start the pairing process.
Typically, this has to be done by going to a setup or connect menu and then selecting the
options to discover Bluetooth devices. It may take several seconds to establish a
connection . Your phone's display should indicate that it has found model “BlueFM” and
prompt you for a passkey or pin. Enter a sequence of “0000”.
When the Bluetooth FM Handsfree Kit is attempting to make a connection, LCD will be
shown:
b.
6-2. Answering incoming calls / Rejecting incoming calls
When there's incoming call present, a ring tone will be heard. The caller information will
be displayed on the LCD.
Profile
Dashboard
11
You can touch the “MFB” button to answer the call and LCD will display
12
2-4. Fix the Bluetooth FM Handsfree Kit to mounting bracket
10
Or long press “Backward” (“ < “) key about 2 seconds to reject the call.
1.
2.
3.
4.
5.
6.
7. “MFB” button; Answer / End call;
Music play / Pause
8. LCD display
9. Power socket
10. Audio input jack
11. Power ON / OFF switch
12. Battery compartment
Mic Mute
Menu/FM memory
FM Frequency Down / Backward
FM Frequency Up / Forward
FM Autoscan
Mic
You can tilt the mounting stand to any angle that you can view the Bluetooth FM Handsfree Kit
most comfortable.
297mm
6-3. Ending calls
During conversation, touch “MFB” button will end the call.
12. FM frequency direct tuning
12-1. When Bluetooth FM Handsfree Kit is turned on, press “M” button once will activate
direct tuning mode. Frequency value on LCD will flash with “MEM” icon solid on.
18. Accessories
6-4. Transfer call (Voice Transfer)
To transfer a call from the unit to mobile phone, please follow the operation instructions
of your phone.
Accessories
Status
1 x Car charger
Provided
3 x AAA
Rechargeable battery
Provided
1 x Mounting bracket
Provided
1 x Mounting stand
Provided
1 x Audio wire
Provided
To transfer a call from mobile phone to unit, touch the “MFB” button shortly during
conversation.
6-5. Adjust volume
The sound signal transmitted from Bluetooth FM Handsfree Kit is at fixed level, you can
adjust the volume at your FM receiver.
6-6. Last number redial
To redial the last number, long press the “forward” (“ > “) button for about 2 seconds.
When you are making an outgoing call, LCD will display
12-2. Press the “>” / “<” button to increase or decrease the frequency.
12-3. To exit direct tuning mode, press “Auto scan” key or wait for timeout without further
frequency increment / decrement.
13. FM frequency memory programming
13-1. Long press “M” button will activate FM memory programming mode.
After the outgoing call is accepted, LCD will display
The current frequency and the icon “MEM” will be displayed and flashing.
13-2. Press “<” / ”>” button to increase/decrease frequency
13-3. Press “M” button, “Pn” location will display and flash.
FCC User manual:
6-7. Voice dial
Make sure voice dial function is set up in mobile. Press and hold the “Backward” (“ < “)
button for about 2seconds to activate the voice dialing.
Federal Communication Commission Interference Statement
6-8. Microphone mute
During conversation, press the mute
key will mute the microphone. Press the mute
key again will resume microphone function.
13-4. Press “M” button to switch between memory locations.
When the microphone is muted, the icon
will be shown on the LCD.
6-9. Call waiting
When the unit is in phone conversation and there is another call coming, pressing “>” for
2 seconds will activate mobile phone to switch between these two phone calls.
7.
Play and pause the music
Make sure your phone supports A2DP and AVRCP profile. On your phone, choose your
song and play. When the music is playing, LCD on the Bluetooth FM Handsfree Kit will
display “ ” icon. You can touch “MFB” button on the Bluetooth FM Handsfree Kit to
pause or play the music.
Remark:
If you find the music only play on your phone and cannot transfer to your Bluetooth FM
Handsfree Kit, please check below.
a. Check whether your phone have A2DP and AVRCP profile and connect with Bluetooth
FM Handsfree Kit.
b. Choose the suitable music player for playing through Bluetooth. (Detail please refer
to your phone manual)
c. Some phones have the sound output setting allow you to set the sound output only at
mobile phone, please disable it. (Detail please refer to your phone manual)
8.
Play next song
When the music is playing, press and release “forward” (“ > “) button will play next song.
9.
Play previous song
When the music is playing, single press and release the “backward” (“<”) button will
replay song from the beginning. Double press the “backward” (“<”) button will play
previous song.
Not every mobile phone will replay current song from the beginning by single press of
“Backward” button. Some mobile phones or Bluetooth devices, single press will go to
previous song.
10.
14
11
No network signal alert
If the mobile phone cannot locate the network signal (e.g. out of the reach), alert tones
will be heard every 5 seconds from the Bluetooth FM Handsfree Kit. LCD will display
“No Network Signal” icon.
13-5. Long press “M” button to store the target frequency to select memory location.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
14. Preset channel recalling
Press "M" button will show the current frequency used. Subsequent press of "M" button
will recall the next memory in order.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
12
15
15. FM frequency auto scan
Press the “Auto scan” button, Bluetooth FM Handsfree Kit will automatically locate a free
FM channel for you. Please tune your car radio to this channel manually or by auto
search function in your car radio.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. To maintain compliance with FCC RF exposure
compliance requirements, please follow operation instruction as documented in this
manual.
16. FM main power auto off
Please note that in order to comply with some countries' radio regulations, the FM
transmission may be turned off automatically if there is no audio signal for about 30
seconds.
17. Connection between Bluetooth FM Handsfree Kit with music players
When Bluetooth FM Handsfree Kit is not connected with your mobile phone, you can
broadcast your music from other music players through it.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Plug the iPod / MP3 / MP4 to audio input jacket of Bluetooth FM Handsfree Kit.
Turn on the music player such as iPod / MP3 / MP4 .
Not every mobile phone supports no network signal alert feature.
11.
Transfer signal from Bluetooth FM Handsfree Kit to car radio system
“Please set the Hands-free Kit to a desired free FM frequency channel and tune your
car radio to this frequency manually or using the auto search function in your car radio.”
10
13
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.458
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : intech
Title                           : MCB-8136.cdr
Creator Tool                    : CorelDRAW Version 12.0
Modify Date                     : 2008:12:17 17:15:18+08:00
Metadata Date                   : 2008:12:17 17:15:18+08:00
Document ID                     : uuid:ab28a510-9eb6-493a-be2e-236f005270e8
Instance ID                     : uuid:815a496e-5f38-4481-a987-5f57eb54aece
Page Count                      : 2
Create Date                     : D:20081217145214
Author                          : intech

EXIF Metadata provided by EXIF.tools