Intel 622ANXHU Intel Centrino Wireless-N+WiMax 6250 User Manual revised manual to address typos

Intel Mobile Communications Intel Centrino Wireless-N+WiMax 6250 revised manual to address typos

UserManual.wiki >

Intel >

622ANXHU User Manual >

revised manual to address typos HTML Version

1. User Manual
2. Users Manual
3. revised manual to address typos

revised manual to address typos

I nt el® W ir eless Adapt er I nform at ion Guide

This version of I ntel® PROSet / Wireless WiFi Soft ware is com pat ible wit h t he adapt ers list ed next . However, not e

that newer feat ures provided in t his software release are generally not support ed for older, legacy adapt ers.

I nt el® Centrino® Wireless- N 100

I nt el® Centrino® Wireless- N 105

I nt el® Centrino® Wireless- N 130

I nt el® Centrino® Wireless- N 135

I nt el® WiFi Link 1000

I nt el® Centrino® Wireless- N 1030

I nt el® Centrino® Wireless- N 2200

I nt el® Centrino® Wireless- N 2230

I nt el® Centrino® Wireless- N + WiMAX 6150

I nt el® Centrino® Advanced - N 6200

I nt el® Centrino® Advanced - N 6205

I nt el® Centrino® Advanced - N 6230

I nt el® Centrino® Advanced - N 6235

I nt el® Centrino® Advanced - N + WiMAX 6250

I nt el® Centrino® Ultim ate-N 6300

Wit h your WiFi net work card, you can access WiFi networks, share files or print ers, or even share your I nt ernet

connect ion. All of these feat ures can be explored using a WiFi network in your hom e or office. This WiFi net work

solut ion is designed for bot h hom e and business use. Additional users and feat ures can be added as your

net working needs grow and change.

This guide contains basic inform at ion about I nt el adapt ers. I t includes inform at ion about several adapt er properties

that you can set t o cont rol and enhance the perform ance of your adapter wit h your particular wireless net work

and environm ent. I nt el® wireless adapt ers enable fast connectivit y wit hout wires for deskt op and not ebook PCs.

Adapt er Settings

Regulat ory I nform at ion

Specificat ions

I m portant I nform at ion

Support

Warrant y

Glossary

Depending on t he m odel of your I nt el WiFi adapter, your adapter is com patible wit h 802.11a, 802.11b, 802.11g,

and 802.11n ( draft 2.0) wireless st andards. Operat ing at 5 GHz or 2.4 GHz frequency at dat a rat es of up t o 450

Mbps, you can now connect your com puter t o existing high - speed net works t hat use m ult iple access points wit hin

large or sm all environm ent s. Your WiFi adapter m aint ains aut om at ic data rate control according to the access point

locat ion and signal st rengt h t o achieve the fast est possible connection. All of your wireless net work connect ions

are easily m anaged by the WiFi connect ion utilit y. Profiles t hat are set up through t he WiFi connect ion ut ility

provide enhanced securit y m easures wit h 802.1X net work authenticat ion.

I n form a t ion in t his docu m e nt is subj e ct t o chan ge w it hout not ice.

Hillsbor o, OR 9 7 1 2 4 - 6 4 9 7 USA

The copying or reproducing of any m at erial in t his docum ent in any m anner what soever wit hout the written

perm ission of I ntel Corporat ion is st rict ly forbidden. I nt el® is a t radem ark or regist ered t radem ark of I nt el

Corporat ion or it s subsidiaries in the Unit ed St at es and ot her countries. Ot her t radem arks and trade nam es m ay

be used in this docum ent t o refer to eit her t he ent it ies claim ing the m arks and nam es or t heir product s. I nt el

disclaim s any proprietary int erest in t radem arks and t rade nam es ot her than it s own. Microsoft and Windows are

regist ered t radem arks of Microsoft Corporation. Windows Vist a is eit her a regist ered t radem ark or t radem ark of

Microsoft Corporat ion in t he United Stat es and/ or ot her count ries.

* Other nam es and brands m ay be claim ed as t he property of others.

I nt el Corporation assum es no responsibility for errors or om issions in this docum ent. Nor does I nt el m ake any

com m it m ent to updat e the inform at ion contained herein.

"I MPORTANT NOTI CE FOR ALL USERS OR DI STRI BUTORS:

I nt el wireless LAN adapters are engineered, m anufactured, t est ed, and qualit y checked t o ensure that t hey m eet

all necessary local and governm ent al regulat ory agency requirem ent s for t he regions t hat they are designat ed

and/ or m arked t o ship into. Because wireless LANs are generally unlicensed devices that share spect rum wit h

radars, satellit es, and ot her licensed and unlicensed devices, it is som et im es necessary t o dynam ically det ect ,

avoid, and lim it usage t o avoid interference wit h these devices. I n m any instances I ntel is required t o provide t est

data to prove regional and local com pliance to regional and governm ental regulat ions before cert ificat ion or

approval t o use the product is grant ed. I nt el's wireless LAN's EEPROM, firm ware, and soft ware driver are designed

to carefully cont rol param eters t hat affect radio operat ion and t o ensure elect rom agnet ic com pliance ( EMC). These

param eters include, wit hout lim it at ion, RF power, spectrum usage, channel scanning, and hum an exposure.

For t hese reasons I nt el cannot perm it any m anipulat ion by third parties of t he software provided in binary form at

wit h the wireless LAN adapters ( e.g., t he EEPROM and firm ware) . Furtherm ore, if you use any pat ches, ut ilit ies, or

code with t he I ntel wireless LAN adapters that have been m anipulated by an unaut horized part y (i.e., patches,

ut ilit ies, or code ( including open source code m odificat ions) which have not been validat ed by I nt el) , ( i) you will be

solely responsible for ensuring the regulat ory com pliance of t he product s, ( ii) I nt el will bear no liabilit y, under any

theory of liabilit y for any issues associated wit h t he m odified product s, including wit hout lim it ation, claim s under

the warrant y and/ or issues arising from regulat ory non -com pliance, and ( iii) I nt el will not provide or be required t o

assist in providing support to any third parties for such m odified product s.

N ot e : Many regulatory agencies consider Wireless LAN adapters to be "m odules", and accordingly, condit ion

syst em - level regulat ory approval upon receipt and review of test dat a docum enting t hat t he antennas and syst em

configurat ion do not cause t he EMC and radio operat ion to be non - com pliant ."

January 31, 2012

Back t o Content s

Adapter Set t ings

The Advan ced tab displays the device properties for t he WiFi adapt er inst alled on your com puter.

How t o Acce ss

At the I nt el® PROSet / Wireless WiFi Connect ion Ut ilit y, Advanced Menu click Ada pt er Sett ings. Select t he

Adva nced tab.

W iFi Ada pt er Set t ings D escript ion

N a m e D escr ip t ion

802.11n

Cha nne l W idt h

( 2 .4 GH z)

Set high throughput channel width t o m axim ize perform ance. Set t he channel width t o Au t o or

2 0 MHz . Use 20MHz if 802.11n channels are restrict ed. This set t ing applies to 802.11n capable

adapt ers only.

N OTE: This set t ing does not apply t o t he I ntel® Wireless WiFi Link 4965AGN ( uses 20 MHz

channel width only) .

802.11n

Cha nne l W idt h

( 5 .2 GH z)

Set high throughput channel width t o m axim ize perform ance. Set t he channel width t o Au t o or

2 0 MHz . Use 20MHz if 802.11n channels are restrict ed. This set t ing applies to 802.11n capable

adapt ers only.

N OTE: This set t ing does not apply t o t he following adapters:

I nt el® WiFi Link 1000

I nt el® Wireless WiFi Link 4965AGN

8 0 2 .1 1 n M ode The 802.11n st andard builds on previous 802.11 st andards by adding m ult iple- input m ult iple-

out put ( MI MO) . MI MO increases data throughput t o im prove t ransfer rat e. Select En able d or

Disa ble d t o set the 802.11n m ode of t he WiFi adapt er. Enabled is the default setting. This

set ting applies t o 802.11n capable adapt ers only.

N OTE: To achieve transfer rat es great er than 54 Mbps on 802.11n connections, WPA2* -AES

securit y m ust be selected. No securit y ( N on e ) can be select ed t o enable net work set up and

troubleshoot ing.

An adm inist rat or can enable or disable support for high throughput m ode t o reduce power-

consum ption or conflict s wit h other bands or com pat ibilit y issues.

Ad Hoc

Cha nne l

Unless the ot her com puters in t he ad hoc network use a different channel from t he default

channel, t here is no need t o change t he channel.

Va lu e: Select the perm itted operat ing channel from t he list .

802.11b/ g: Select t his option when 802.11b and 802.11g ( 2.4 GHz) ad hoc band

frequency is used.

802.11a: Select t his option when 802.11a ( 5 GHz) ad hoc band frequency is used. This

set ting does not apply t o t he I ntel® WiFi Link 1000 adapt er.

N OTE: When an 802.11a channel is not displayed, initiat ing ad hoc net works is not supported

for 802.11a channels.

Ad Hoc Pow er

Mana ge m ent

Set power saving feat ures for device t o device ( ad hoc) networks.

D isa ble : Select when connect ing t o ad hoc net works t hat contain st at ions t hat do not

support ad hoc power m anagem ent

Maxim um Pow er Savings: Select t o opt im ize bat t ery life.

N oisy En vironm ent : Select t o opt im ize perform ance or connect ing wit h m ult iple client s.

Ad Hoc QoS

Mode

Qualit y of Service (QoS) cont rol in ad hoc net works. QoS provides priorit ization of traffic from

the access point over a wireless LAN based on t raffic classificat ion. WMM ( Wi- Fi Mult im edia) is

the QoS cert ificat ion of the Wi- Fi Alliance ( WFA) . When WMM is enabled, t he WiFi adapter uses

WMM t o support priorit y t agging and queuing capabilit ies for Wi-Fi networks.

W M M Enable d ( Default )

W M M Disa ble d

Fa t Channel

I n t ole r an t

This setting com m unicat es t o surrounding net works t hat t his WiFi adapt er is not t olerant of

40MHz channels in t he 2.4GHz band. The default setting is for t his t o be t urned off ( disabled) ,

so t hat t he adapter does not send t his not ificat ion.

N OTE: This set t ing does not apply t o t he following adapters:

I nt el® Wireless WiFi Link 4965AG_

I nt el® PRO/ Wireless 3945ABG Net work Connect ion

Mix ed m ode

pr ot e ct ion

Use t o avoid dat a collisions in a m ixed 802.11b and 802.11g environm ent. Request t o

Send/ Clear t o Send ( RTS/ CTS) should be used in an environm ent where clients m ay not hear

each ot her. CTS- t o -self can be used t o gain m ore t hroughput in an environm ent where client s

are in close proxim it y and can hear each ot her.

Pow er

Mana ge m ent

Let s you select a balance bet ween power consum ption and WiFi adapter perform ance. The WiFi

adapt er power set t ings slider set s a balance bet ween the com put er's power source and the

battery.

Use default value : ( Default) Power set tings are based on the com puter's power source.

Manual: Adj ust t he slider for t he desired set t ing. Use the lowest set t ing for m axim um

battery life. Use t he highest set t ing for m axim um perform ance.

N OTE: Power consum ption savings vary based on Net work ( I nfrast ruct ure) settings.

Roam ing

Aggr essive ne ss

This setting lets you define how aggressively your wireless client roam s to im prove connection

to an access point .

Defa u lt : Balanced set t ing bet ween not roam ing and perform ance.

Low e st : Your wireless client will not roam . Only significant link quality degradat ion

causes it t o roam t o anot her access point .

H ig he st : Your wireless client continuously t racks the link quality. I f any degradat ion

occurs, it t ries t o find and roam t o a better access point.

Throughput

Enha ncem en t

Changes the value of t he Packet Burst Cont rol.

Enable: Select to enable throughput enhancem ent .

D isa ble : ( Default ) Select t o disable throughput enhancem ent.

Tr ansm it

Pow er

Defa u lt Se t t in g : Highest power setting.

Low est : Minim um Cover age : Set t he adapter to the lowest t ransm it power. Enables you t o

expand the num ber of coverage areas or confine a coverage area. Reduces the coverage area

in high t raffic areas t o im prove overall t ransm ission qualit y and avoids congest ion and

int erference wit h other devices.

Highest : M a x im um Coverage : Set t he adapter to a m axim um t ransm it power level. Select

for m axim um perform ance and range in environm ent s wit h lim it ed addit ional WiFi radio

devices.

N OTE: The opt im al setting is for a user to always set the transm it power at the lowest

possible level t hat is st ill com pat ible wit h the qualit y of t heir com m unicat ion. This allows t he

m axim um num ber of wireless devices t o operat e in dense areas and reduce int erference wit h

ot her devices t hat it shares t he sam e radio spect rum wit h.

N OTE: This set t ing t akes effect when either Net work ( I nfrast ruct ure) or Device t o Device (ad

hoc) m ode is used.

W ireless Mode Select which m ode t o use for connect ion to a wireless network:

8 0 2 .1 1 a on ly : Connect t he wireless WiFi adapter to 802.11a net works only. Not

applicable for all adapters.

8 0 2 .1 1 b only : Connect the wireless WiFi adapt er t o 802.11b net works only. Not

applicable for all adapters.

8 0 2 .1 1 g only : Connect the wireless WiFi adapt er t o 802.11g net works only.

802.11a and 802.11g: Connect the WiFi adapter to 802.11a and 802.11g networks

only. Not applicable for all adapt ers.

802.11b and 802.11g: Connect t he WiFi adapt er t o 802.11b and 802.11g net works

only. Not applicable for all adapt ers.

802.11a, 802.11b, and 802.11g: ( Default ) - Connect t o eit her 802.11a, 802.11b or

802.11g wireless networks. Not applicable for all adapt ers.

OK Saves settings and ret urns to t he previous page.

Cance l Closes and cancels any changes.

Microsoft W indow s* Advanced Opt ions ( Ada pt er Set t in gs)

To access t he Windows* XP Advanced opt ions:

1. Start Windows and log on with adm inist rat ive privileges.

2. From your desktop, right - click M y Com pu t e r and click Pr op er t ie s.

3. Click the H ar dw are t ab.

4. Click De vice M a nager .

5. Double- click Netw or k a da pt er s.

6. Right - click t he nam e of the inst alled WiFi adapter that is in use.

7. Click Proper t ie s.

8. Select the Advance d t ab.

9. Select the propert y you want ( for exam ple, Mixed Mode Prot ect ion, Power Managem ent ) .

10. To select a new value or set t ing, click Use de fa ult value t o clear t he checkbox. Then select a new value or

set ting. To ret urn t o t he default value, click t he Use de fa ult value checkbox. ( The Use default value box

is not present for all properties, for exam ple, Ad Hoc Channel. I n t his case, sim ply select t he set ting you

want.)

11. To save your settings and exit the window, click OK.

Back t o Top

Back t o Content s

Trademarks and Disclaimers

Back t o Content s

Regulatory I nform ation

N OTE: Due t o t he evolving st at e of regulat ions and st andards in t he wireless LAN field ( I EEE 802.11

and sim ilar standards) , t he inform at ion provided herein is subj ect t o change. I nt el Corporation

assum es no responsibilit y for errors or om issions in t his docum ent.

I nt el® Centrino® Wireless- N 100

I nt el® Centrino® Wireless- N 105

I nt el® Centrino® Wireless- N 130

I nt el® Centrino® Wireless- N 135

I nt el® WiFi Link 1000

I nt el® Centrino® Wireless- N 1030

I nt el® Centrino® Wireless- N 2200

I nt el® Centrino® Wireless- N 2230

I nt el® Centrino® Wireless- N + WiMAX 6150

I nt el® Centrino® Advanced - N 6200

I nt el® Centrino® Advanced - N 6205

I nt el® Centrino® Advanced - N 6230

I nt el® Centrino® Advanced - N 6235

I nt el® Centrino® Advanced - N + WiMAX 6250

I nt el® Centrino® Ultim ate-N 6300

I nt el W iFi/ W iM AX W ireless Adapt e r s

I nform at ion in t his sect ion supports t he following wireless adapt ers:

I nt el® Centrino® Wireless- N + WiMAX 6150

I nt el® Centrino® Advanced - N + WiMAX 6250

See Specificat ions for com plet e wireless adapt er specifications.

N OTE: I n t his sect ion, all references t o the "wireless adapt er" refer to all adapters list ed above.

The following inform ation is provided:

I nform at ion for the User

Regulat ory I nform at ion

I nform a tion for t he User

Sa fe t y N ot ices

USA—FCC a nd FAA

The FCC wit h its act ion in ET Docket 96 - 8 has adopt ed a safet y st andard for hum an exposure t o radio frequency

(RF) electrom agnet ic energy em it t ed by FCC certified equipm ent. The wireless adapt er m eet s t he Hum an Exposure

lim its found in OET Bulletin 65, supplem ent C, 2001, and ANSI / I EEE C95.1, 1992. Proper operat ion of t his radio

according t o t he instruct ions found in t his m anual will result in exposure subst antially below t he FCC’s

recom m ended lim it s.

The following safet y precaut ions should be observed:

Do not t ouch or m ove ant enna while t he unit is transm it t ing or receiving.

Do not hold any com ponent cont aining the radio such t hat t he ant enna is very close or t ouching any

exposed parts of t he body, especially the face or eyes, while t ransm itting.

Do not operat e t he radio or attem pt t o t ransm it dat a unless the ant enna is connect ed; t his behavior m ay

cause dam age t o t he radio.

Use in specific environm ents:

The use of wireless adapt ers in hazardous locations is lim ited by the const raint s posed by t he safet y

direct ors of such environm ent s.

The use of wireless adapt ers on airplanes is governed by the Federal Aviat ion Adm inist rat ion ( FAA) .

The use of wireless adapt ers in hospit als is restricted t o t he lim its set forth by each hospit al.

Ex plosive Device Pr ox im it y W a r ning

W arn ing: Do not operat e a port able transm itter (including t his wireless adapt er) near unshielded blast ing

caps or in an explosive environm ent unless the transm it t er has been m odified t o be qualified for such use.

Ant enna W ar nings

W arn ing: The wireless adapt er is not designed for use wit h high - gain direct ional antennas.

Use On Aircraft Ca ut ion

Ca ution: Regulat ions of the FCC and FAA prohibit airborne operat ion of radio- frequency wireless devices

(wireless adapt ers) because t heir signals could int erfere wit h critical aircraft instrum ent s.

Ot h er W ireless D e vices

Sa fe t y N ot ices for Ot h er Device s in t he W ir eless N et w ork : See t he docum ent at ion supplied wit h wireless

adapt ers or ot her devices in t he wireless network.

Local Re st rict ion s on 8 0 2 .1 1 a, 8 0 2 .1 1 b, 8 0 2 .1 1 g, 8 0 2 .1 1 n, a nd 8 0 2 .1 6 e Radio Usage

Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e

wireless LAN devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g, 802.11n, and

802.16e product s are designed for use only in specific count ries, and are not allowed t o be operat ed in countries

ot her t han t hose of designated use. As a user of these products, you are responsible for ensuring that t he

product s are used only in t he countries for which t hey were int ended and for verifying t hat t hey are configured

wit h the correct selection of frequency and channel for t he count ry of use. The device t ransm it power control

(TPC) int erface is part of t he I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y Soft ware. Operat ional restrictions for

Equivalent I sot ropic Radiat ed Power (EI RP) are provided by t he syst em m anufact urer. Any deviat ion from t he

perm issible power and frequency set t ings for t he country of use is an infringem ent of nat ional law and m ay be

punished as such.

For country -specific inform ation, see t he addit ional com pliance inform ation supplied wit h the product .

W ireless I n t erope rabilit y

The wireless adapt er is designed to be interoperable wit h ot her wireless LAN product s t hat are based on direct

sequence spread spect rum ( DSSS) radio technology and t o com ply wit h t he following st andards:

I EEE St d. 802.11b com pliant St andard on Wireless LAN

I EEE St d. 802.11g com pliant St andard on Wireless LAN

I EEE St d. 802.11a com pliant St andard on Wireless LAN

I EEE St d. 802.11n draft 2.0 com pliant on Wireless LAN

I EEE 802.16e- 2005 Wave 2 com pliant

Wireless Fidelit y cert ification, as defined by t he Wi- Fi Alliance

WiMAX certification as defined by t he WiMAX Forum

The W ir eless Adapt e r and You r H e alt h

The wireless adapt er, like other radio devices, em its radio frequency elect rom agnet ic energy. The level of energy

em it t ed by t he wireless adapt er, however, is less t han the electrom agnet ic energy em itted by other wireless

devices such as m obile phones. The wireless adapter operates wit hin t he guidelines found in radio frequency safet y

st andards and recom m endat ions. These standards and recom m endat ions reflect t he consensus of the scient ific

com m unit y and result from deliberat ions of panels and com m it tees of scientist s who cont inually review and

int erpret the extensive research lit erature. I n som e sit uat ions or environm ent s, t he use of the wireless adapt er

m ay be restrict ed by t he propriet or of t he building or responsible represent at ives of t he applicable organizat ion.

Exam ples of such sit uat ions m ay include:

Using the wireless adapt er on board airplanes, or

Using the wireless adapt er in any ot her environm ent where the risk of int erference wit h other devices or

services is perceived or identified as being harm ful.

I f you are uncert ain of the policy t hat applies t o t he use of wireless adapt ers in a specific organizat ion or

environm ent ( an airport , for exam ple) , you are encouraged t o ask for authorizat ion t o use the adapt er before you

turn it on.

W EEE

Re gula tory I nform a t ion

I n form a t ion for t he OEM s a nd I ntegra t or s

The following st at em ent m ust be included wit h all versions of t his docum ent supplied t o an OEM or integrator, but

should not be dist ributed t o t he end user.

This device is intended for OEM integrat ors only.

Please see t he full Grant of Equipm ent docum ent for other restrictions.

This device m ust be operat ed and used wit h a locally approved access point.

Any changes or m odificat ions t o t his product not expressly approved by I nt el could void t he user's

aut horizat ion to operat e t he product .

The requirem ents described within t his docum ent are provided t o OEM integrat ors inst alling I nt el® wireless

adapt ers in host plat form s. St rict adherence t o t hese requirem ents is necessary t o m eet t he condit ions of

com pliance wit h FCC rules, including RF exposure. When all requirem ent s described herein are fulfilled, t he I nt el®

wireless adapters m ay be inst alled in host plat form s wit h no furt her restrictions when incorporat ing int o host

syst em s. I f any of t he requirem ents herein are not sat isfied, t he OEM int egrat or is responsible to conduct t he

necessary syst em level regulatory t esting and/ or obtain t he required approvals for com pliance.

Ant enna Ty pe and Ga ins

Only ant ennas of t he sam e t ype and wit h equal or less gains as shown below m ay be used wit h the I nt el®

wireless adapters. Ot her t ypes of antennas and/ or higher gain antennas are not aut horized.

Ant enna Ty pe Ant enna Loca t ion

( Main/ Au x)

2 .4 GH z

Pe ak Gain

in dBi*

2 .6 GH z

Pe ak Gain

in dBi*

5 .2 GH z

Pe ak Gain

in dBi*

5 .5 GH z

Pe ak Gain

in dBi*

5 .7 GHz

Pe ak Gain

in dBi*

PI FA Main 3.24 3.47 3.73 4.77 4.97

Aux

MI MO

* All ant enna gains include cable loss.

Ant enna Placem ent W it hin t he H ost Syst em

To ensure RF exposure com pliance, the ant enna( s) used wit h the I nt el® wireless adapt ers m ust be inst alled in t he

host syst em t o provide a m inim um separat ion dist ance from all persons, in all operat ing m odes and orientat ions of

the host syst em , wit h st rict adherence to the t able below. The ant enna separat ion distance applies t o bot h

horizont al and vert ical orient at ion of the ant enna when inst alled in t he host syst em .

W ireless Adapt e r Minim um r equired ant enna - to- user

sepa rat ion dist ance

I nt el® Centrino® Wireless- N + WiMAX 6150 18 m m

I nt el® Centrino® Wireless- N + WiMAX 6350 17 m m

Sim ult ane ous Transm ission of I n t el® W ireless Adapter s w it h Ot h er I ntegra t e d or Plug - I n Tran sm it t e rs

Based upon FCC Knowledge Dat abase publicat ion num ber 616217 D03 Supplem ent

ht t ps: / / fj allfoss.fcc.gov/ kdb/ Get At t achm ent .ht m l?id= 30257, when there are m ult iple transm it t ing devices inst alled

in a host device, an RF exposure t ransm it t ing assessm ent shall be perform ed t o det erm ine t he necessary

application and t est requirem ents. OEM int egrat ors m ust ident ify all possible com binat ions of sim ult aneous

transm ission configurations for all t ransm it t ers and antennas installed in t he host syst em . This includes

transm itters installed in t he host as m obile devices ( > 20 cm separat ion from user) and portable devices ( < 20 cm

separat ion from user). OEM int egrat ors should consult t he act ual FCC KDB 616217 D03 Supplem ent docum ent for

all det ails in m aking t his assessm ent t o det erm ine if any additional requirem ents for t est ing or FCC approval is

necessary.

I n form a t ion To Be Supplie d t o t he End User by t he OEM or I nt egr a t or

The following regulatory and safet y not ices m ust be published in docum entat ion supplied to the end user of t he

product or syst em incorporating t he I ntel® wireless adapt er, in com pliance with local regulat ions. Host syst em

m ust be labeled wit h "Cont ains FCC I D: XXXXXXXX" , FCC I D displayed on label.

The I nt el® wireless adapt er m ust be inst alled and used in st rict accordance wit h the m anufact urer's inst ruct ions as

described in the user docum ent at ion that com es wit h the product . I nt el Corporat ion is not responsible for any

radio or t elevision interference caused by unauthorized m odificat ion of the devices included wit h the wireless

adapt er kit or t he subst it ut ion or attachm ent of connecting cables and equipm ent ot her than t hat specified by I nt el

Corporat ion. The correct ion of interference caused by such unaut horized m odificat ion, substitut ion or at tachm ent is

the responsibilit y of t he user. I ntel Corporat ion and authorized resellers or dist ributors are not liable for any

dam age or violation of governm ent regulat ions t hat m ay arise from t he user failing t o com ply wit h these

guidelines.

Local Re st rict ion of 8 0 2 .1 1 a , 8 0 2 .1 1 b, 8 0 2 .1 1 g, and 8 0 2 .1 1 n Radio Usage

The following st at em ent on local rest rict ions m ust be published as part of t he com pliance docum entat ion for all

802.11a, 802.11b, 802.11g and 802.11n products.

Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e

wireless LAN devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g, 802.11n, and

802.16e product s are designed for use only in specific count ries, and are not allowed t o be operat ed in countries

ot her t han t hose of designated use. As a user of these products, you are responsible for ensuring that t he

product s are used only in t he countries for which t hey were int ended and for verifying t hat t hey are configured

wit h the correct selection of frequency and channel for t he count ry of use. Any deviation from t he perm issible

power and frequency set t ings for t he country of use is an infringem ent of nat ional law and m ay be punished as

such.

FCC Ra dio Fr equency I n te rfer ence Re qu ir em ents

This wireless adapt er is rest rict ed t o indoor use due t o its operat ion in the 5.15 to 5.25 GHz frequency range. FCC

requires this wireless adapt er t o be used indoors for t he frequency range 5.15 t o 5.25 GHz t o reduce t he pot ent ial

for harm ful interference t o co- channel m obile satellit e syst em s. High power radars are allocated as prim ary users

of t he 5.25 to 5.35 GHz and 5.65 t o 5.85 GHz bands. These radar st at ions can cause int erference wit h and / or

dam age t his device.

6250

This wireless adapt er is int ended for OEM int egrat ors only.

This wireless adapt er cannot be co- locat ed wit h any ot her transm it t er unless approved by t he FCC.

USA—Fe deral Com m u nica t ion s Com m ission ( FCC)

This wireless adapt er com plies wit h Part 15 of t he FCC Rules. Operat ion of t he device is subj ect t o t he following

two conditions:

This device m ay not cause harm ful interference.

This device m ust accept any int erference t hat m ay cause undesired operat ion.

I n t erfere nce St at em ent

This wireless adapt er has been t est ed and found t o com ply wit h the lim it s for a Class B digital device, pursuant t o

Part 15 of the FCC Rules. These lim its are designed t o provide reasonable prot ect ion against harm ful interference

in a resident ial inst allat ion. This wireless adapter generat es, uses, and can radiat e radio frequency energy. I f t he

wireless adapter is not installed and used in accordance wit h the inst ruct ions, t he wireless adapt er m ay cause

harm ful int erference t o radio com m unicat ions. There is no guarantee, however, t hat such int erference will not

occur in a particular inst allation. I f t his wireless adapt er does cause harm ful interference t o radio or t elevision

recept ion ( which can be det erm ined by turning t he equipm ent off and on) , t he user is encouraged to try t o correct

the interference by t aking one or m ore of the following m easures:

Reorient or relocat e t he receiving ant enna of t he equipm ent experiencing t he int erference.

I ncrease the dist ance bet ween t he wireless adapt er and t he equipm ent experiencing t he int erference.

Connect t he com puter wit h the wireless adapt er t o an out let on a circuit different from t hat to which t he

equipm ent experiencing t he int erference is connect ed.

Consult t he dealer or an experienced radio/ TV t echnician for help.

N OTE: The adapt er m ust be inst alled and used in strict accordance wit h the m anufact urer's

inst ruct ions as described in the user docum entat ion that com es wit h the product . Any other installat ion

or use will violat e FCC Part 15 regulations.

Safety Approva l Considerat ions

This device has been safety approved as a com ponent and is for use only in com plet e equipm ent where t he

accept abilit y of t he com binat ion is determ ined by t he appropriat e safet y agencies. When inst alled, considerat ion

m ust be given t o t he following:

I t m ust be inst alled int o a com pliant host device m eeting the requirem ent of UL/ EN/ I EC 60950 - 1 2nd edit ion

including t he general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 ( Fire Enclosure) .

The device shall be supplied by a SELV source when installed in t he end -use equipm ent .

A heat ing t est shall be considered in t he end - use product for m eet ing the requirem ent of UL/ EN/ I EC 60950 -

1 2nd edit ion.

Low H alogen

Applies only t o brom inat ed and chlorinated flam e retardants (BFRs/ CFRs) and PVC in t he final product. I nt el

com ponent s as well as purchased com ponent s on the finished assem bly m eet JS- 709 requirem ent s, and t he PCB /

subst rat e m eet I EC 61249 - 2 - 21 requirem ent s. The replacem ent of halogenat ed flam e retardants and/ or PVC m ay

not be bet t er for the environm ent.

Taiw an

Ra dio Approva ls

To determ ine whether you are allowed to use your wireless network device in a specific country, please check to

see if t he radio type num ber t hat is print ed on t he ident ification label of your device is listed in t he m anufact urer's

OEM Regulat ory Guidance docum ent.

Re gula tory Mark ings

A list of required regulatory m arkings can be found on t he web at http: / / www.int el.com / support / wireless/ wlan/

To find the regulat ory inform ation for your adapt er, click on the link for your adapter. Then click Ad dit ion a l

I n for m a t ion > Re gulat ory Docum ent s.

I nt el W iFi Adapt e rs, 8 0 2 .1 1 n Com plia nt

The inform at ion in t his sect ion applies t o t he following product s:

I nt el® Centrino® Wireless- N 100

I nt el® Centrino® Wireless- N 105

I nt el® Centrino® Wireless- N 130

I nt el® Centrino® Wireless- N 135

I nt el® WiFi Link 1000

I nt el® Centrino® Wireless- N 1030

I nt el® Centrino® Wireless- N 2200

I nt el® Centrino® Wireless- N 2230

I nt el® Centrino® Advanced - N 6200

I nt el® Centrino® Advanced - N 6205

I nt el® Centrino® Advanced - N 6230

I nt el® Centrino® Advanced - N 6235

I nt el® Centrino® Ultim ate-N 6300

See Specificat ions for wireless adapt er specifications.

N OTE: I n t his sect ion, all references t o the "wireless adapt er" refer to all adapters list ed above.

The following inform ation is provided:

I nform at ion for the User

Regulat ory I nform at ion

I nform a tion for t he User

Sa fe t y N ot ices

USA—FCC a nd FAA

The FCC wit h its act ion in ET Docket 96 - 8 has adopt ed a safet y st andard for hum an exposure t o radio frequency

(RF) electrom agnet ic energy em it t ed by FCC certified equipm ent. The wireless adapt er m eet s t he Hum an Exposure

lim its found in OET Bulletin 65, supplem ent C, 2001, and ANSI / I EEE C95.1, 1992. Proper operat ion of t his radio

according t o t he instruct ions found in t his m anual will result in exposure subst antially below t he FCC’s

recom m ended lim it s.

The following safet y precaut ions should be observed:

Do not t ouch or m ove ant enna while t he unit is transm it t ing or receiving.

Do not hold any com ponent cont aining the radio such t hat t he ant enna is very close or t ouching any

exposed parts of t he body, especially the face or eyes, while t ransm itting.

Do not operat e t he radio or attem pt t o t ransm it dat a unless the ant enna is connect ed; t his behavior m ay

cause dam age t o t he radio.

Use in specific environm ents:

The use of wireless adapt ers in hazardous locations is lim ited by the const raint s posed by t he safet y

direct ors of such environm ent s.

The use of wireless adapt ers on airplanes is governed by the Federal Aviat ion Adm inist rat ion ( FAA) .

The use of wireless adapt ers in hospit als is restricted t o t he lim its set forth by each hospit al.

Ex plosive Device Pr ox im it y W a r ning

W arn ing: Do not operat e a port able transm itter (including t his wireless adapt er) near unshielded blast ing

caps or in an explosive environm ent unless the transm it t er has been m odified t o be qualified for such use.

Ant enna W ar nings

W arn ing: The wireless adapt er is not designed for use wit h high - gain direct ional antennas.

Use On Aircraft Ca ut ion

Ca ution: Regulat ions of the FCC and FAA prohibit airborne operat ion of radio- frequency wireless devices

(wireless adapt ers) because t heir signals could int erfere wit h critical aircraft instrum ent s.

Ot h er W ireless D e vices

Sa fe t y N ot ices for Ot h er Device s in t he W ir eless N et w ork : See t he docum ent at ion supplied wit h wireless

adapt ers or ot her devices in t he wireless network.

Local Re st rict ion s on 8 0 2 .1 1 a, 8 0 2 .1 1 b, 8 0 2 .1 1 g a nd 8 0 2 .1 1 n Radio Usa ge

Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN

devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g and 802.11n product s are

designed for use only in specific count ries, and are not allowed to be operat ed in countries ot her t han those of

designat ed use. As a user of t hese products, you are responsible for ensuring that t he product s are used only in

the count ries for which they were int ended and for verifying t hat t hey are configured wit h the correct select ion of

frequency and channel for t he country of use. The device transm it power control ( TPC) interface is part of t he

I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y Soft ware. Operat ional restrict ions for Equivalent I sot ropic Radiat ed

Power ( EIRP) are provided by t he syst em m anufact urer. Any deviat ion from t he perm issible power and frequency

set tings for t he country of use is an infringem ent of nat ional law and m ay be punished as such.

For country -specific inform ation, see t he addit ional com pliance inform ation supplied wit h the product .

W ireless I n t erope rabilit y

The wireless adapt er is designed to be interoperable wit h ot her wireless LAN product s t hat are based on direct

sequence spread spect rum ( DSSS) radio technology and t o com ply wit h t he following st andards:

I EEE St d. 802.11b com pliant St andard on Wireless LAN

I EEE St d. 802.11g com pliant St andard on Wireless LAN

I EEE St d. 802.11a com pliant St andard on Wireless LAN

I EEE St d. 802.11n draft 2.0 com pliant on Wireless LAN

Wireless Fidelit y cert ification, as defined by t he Wi- Fi Alliance

The W ir eless Adapt e r and You r H e alt h

The wireless adapt er, like other radio devices, em its radio frequency elect rom agnet ic energy. The level of energy

em it t ed by t he wireless adapt er, however, is less t han the electrom agnet ic energy em itted by other wireless

devices such as m obile phones. The wireless adapter operates wit hin t he guidelines found in radio frequency safet y

st andards and recom m endat ions. These standards and recom m endat ions reflect t he consensus of the scient ific

com m unit y and result from deliberat ions of panels and com m it tees of scientist s who cont inually review and

int erpret the extensive research lit erature. I n som e sit uat ions or environm ent s, t he use of the wireless adapt er

m ay be restrict ed by t he propriet or of t he building or responsible represent at ives of t he applicable organizat ion.

Exam ples of such sit uat ions m ay include:

Using the wireless adapt er on board airplanes, or

Using the wireless adapt er in any ot her environm ent where the risk of int erference wit h other devices or

services is perceived or identified as being harm ful.

I f you are uncert ain of the policy t hat applies t o t he use of wireless adapt ers in a specific organizat ion or

environm ent ( an airport , for exam ple) , you are encouraged t o ask for authorizat ion t o use the adapt er before you

turn it on.

W EEE

Re gula tory I nform a t ion

I n form a t ion for t he OEM s a nd I ntegra t or s

The following st at em ent m ust be included wit h all versions of t his docum ent supplied t o an OEM or integrator, but

should not be dist ributed t o t he end user.

This device is intended for OEM integrat ors only.

Please see t he full Grant of Equipm ent docum ent for other restrictions.

This device m ust be operat ed and used wit h a locally approved access point.

Any changes or m odificat ions t o t his product not expressly approved by I nt el could void t he user's

aut horizat ion to operat e t he product .

The requirem ents described within t his docum ent are provided t o OEM integrat ors inst alling I nt el® wireless

adapt ers in host plat form s. St rict adherence t o t hese requirem ents is necessary t o m eet t he condit ions of

com pliance wit h FCC and I ndust ry Canada rules, including RF exposure. When all requirem ent s described herein

are fulfilled, the I nt el® wireless adapt ers m ay be inst alled in host plat form s wit h no further rest rict ions when

incorporat ing int o host syst em s. I f any of the requirem ent s herein are not sat isfied, t he OEM int egrat or is

responsible t o conduct t he necessary syst em level regulat ory test ing and/ or obtain t he required approvals for

com pliance.

Ant enna Ty pe and Ga ins

Only ant ennas of t he sam e t ype and wit h equal or less gains as shown below m ay be used wit h the I nt el®

wireless adapters. Ot her t ypes of antennas and/ or higher gain antennas are not aut horized.

Ant enna Ty pe Ant enna Loca t ion 2 .4 GHz 2 .6 GHz 5 .2 GHz 5 .5 GHz 5 .7 GH z

( Main/ Au x) Pe ak Gain

in dBi*

Pe ak Gain

in dBi*

Pe ak Gain

in dBi*

Pe ak Gain

in dBi*

Pe ak Gain

in dBi*

PI FA Main 3.24 3.47 3.73 4.77 4.97

Aux

MI MO

* All ant enna gains include cable loss.

Ant enna Placem ent W it hin t he H ost Syst em

To ensure RF exposure com pliance, the ant enna( s) used wit h the I nt el® wireless adapt ers m ust be inst alled in t he

host syst em t o provide a m inim um separat ion dist ance from all persons, in all operat ing m odes and orientat ions of

the host syst em , wit h st rict adherence to the t able below. The ant enna separat ion distance applies t o bot h

horizont al and vert ical orient at ion of the ant enna when inst alled in t he host syst em .

W ireless Adapt e r Minim um r equired ant enna - to- user

sepa rat ion dist ance

I nt el® Centrino® Wireless- N 100 9 m m

I nt el® Centrino® Wireless- N 105 9 m m

I nt el® Centrino® Wireless- N 130 8 m m

I nt el® Centrino® Wireless- N 135 9 m m

I nt el® WiFi Link 1000* 20 m m

I nt el® Centrino® Wireless- N 1030 8 m m

I nt el® Centrino® Wireless- N 2200 9 m m

I nt el® Centrino® Wireless- N 2230 9 m m

I nt el® Centrino® Advanced - N 6200* 20 m m

I nt el® Centrino® Advanced - N 6205 12 m m

I nt el® Centrino® Advanced - N 6230 12 m m

I nt el® Centrino® Advanced - N 6235 12 m m

I nt el® Centrino® Ultim ate-N 6300 13 m m

* This wireless adapt er m ay be inst alled in m obile devices only

(requires > 20 cm antenna separat ion from t he body of user).