Intel 9560NG Intel Dual Band Wireless-AC 9560 User Manual Intel WiFi Adapter Information Guide

Intel Mobile Communications Intel Dual Band Wireless-AC 9560 Intel WiFi Adapter Information Guide

User Manual

Intel® WiFi Adapter Information GuideThis version of Intel® PROSet/Wireless WiFi Software is compatible with the adapters listed below. However, notethat newer features provided in this software release are generally not supported for older, legacy adapters.The following adapters are supported on this release for Windows* 10:Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 8260 (64-bit only)Intel® Dual Band Wireless-AC 8265Intel® Wireless-AC 9260Intel® Wireless-AC 9560Intel® Wireless Gigabit 11000Intel® Tri-Band Wireless-AC 18265The following adapters are supported on this release for Windows* 8 and Windows* 8.1 with Windows* 7 driversfrom Intel®:Intel® Centrino® Wireless-N 100Intel® Centrino® Wireless-N 130Intel® Centrino® Wireless-N 1000Intel® Centrino® Wireless-N 1030Intel® Centrino® Advanced-N 6200Intel® Centrino® Advanced-N 6230The following adapters are supported on this release for Windows* 8 with Windows* 8 drivers from Intel®:Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Wireless-N + WiMAX 6150Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6235Intel® Centrino® Advanced-N + WiMAX 6250Intel® Centrino® Ultimate-N 6300Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 3168Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260The following adapters are supported on this release for Windows* 8.1 with Windows* 8 drivers from Intel®:Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Wireless-N + WiMAX 6150
Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6235Intel® Centrino® Advanced-N + WiMAX 6250Intel® Centrino® Ultimate-N 6300The following adapters are supported on this release for Windows* 8.1 with Windows* 8.1 drivers from Intel®:Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 3168Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260Intel® Tri-Band Wireless-AC 17265Intel® Tri-Band Wireless-AC 18260Intel® Wireless Gigabit 11000With your WiFi network card, you can access WiFi networks, share files or printers, or even share your Internetconnection. All of these features can be explored using a WiFi network in your home or office. This WiFi networksolution is designed for both home and business use. Additional users and features can be added as your networkingneeds grow and change.This guide contains basic information about Intel adapters. It includes information about several adapter propertiesthat you can set to control and enhance the performance of your adapter with your particular wireless network andenvironment. Intel® wireless adapters enable fast connectivity without wires for desktop and notebook PCs.Adapter SettingsRegulatory InformationSpecificationsImportant InformationSupportWarrantyGlossaryDepending on the model of your Intel WiFi adapter, your adapter is compatible with 802.11a, 802.11b, 802.11g, and802.11n (draft 2.0) wireless standards. Operating at 5GHz or 2.4GHz frequency at data rates of up to 450 Mbps, youcan now connect your computer to existing high-speed networks that use multiple access points within large or smallenvironments. Your WiFi adapter maintains automatic data rate control according to the access point location andsignal strength to achieve the fastest possible connection. All of your wireless network connections are easilymanaged by the WiFi connection utility. Profiles that are set up through the WiFi connection utility provide enhancedsecurity measures with 802.1X network authentication.Information in this document is subject to change without notice.© 2004–2014 Intel Corporation. All rights reserved. Intel Corporation, 5200 N.E. Elam Young Parkway,Hillsboro, OR 97124-6497 USAThe copying or reproducing of any material in this document in any manner whatsoever without the writtenpermission of Intel Corporation is strictly forbidden. Intel® is a trademark or registered trademark of IntelCorporation or its subsidiaries in the United States and other countries. Other trademarks and trade names may beused in this document to refer to either the entities claiming the marks and names or their products. Intel disclaimsany proprietary interest in trademarks and trade names other than its own. Microsoft and Windows are registeredtrademarks of Microsoft Corporation. Windows Vista is either a registered trademark or trademark of MicrosoftCorporation in the United States and/or other countries.*Other names and brands may be claimed as the property of others.
Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make anycommitment to update the information contained herein.IMPORTANT NOTICE FOR ALL USERS OR DISTRIBUTORS:Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet allnecessary local and governmental regulatory agency requirements for the regions that they are designated and/ormarked to ship into. Because wireless LANs are generally unlicensed devices that share spectrum with radars,satellites, and other licensed and unlicensed devices, it is sometimes necessary to dynamically detect, avoid, andlimit usage to avoid interference with these devices. In many instances Intel is required to provide test data to proveregional and local compliance to regional and governmental regulations before certification or approval to use theproduct is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully controlparameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include,without limitation, RF power, spectrum usage, channel scanning, and human exposure.For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary formatwith the wireless LAN adapters (e.g., the EEPROM and firmware). Furthermore, if you use any patches, utilities, orcode with the Intel wireless LAN adapters that have been manipulated by an unauthorized party (i.e., patches,utilities, or code (including open source code modifications) which have not been validated by Intel), (i) you will besolely responsible for ensuring the regulatory compliance of the products, (ii) Intel will bear no liability, under anytheory of liability for any issues associated with the modified products, including without limitation, claims under thewarranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assistin providing support to any third parties for such modified products.Note: Many regulatory agencies consider Wireless LAN adapters to be "modules", and accordingly, condition system-level regulatory approval upon receipt and review of test data documenting that the antennas and systemconfiguration do not cause the EMC and radio operation to be non-compliant.March 27, 2017
Back to ContentsAdapter SettingsThe Advanced tab displays the device properties for the WiFi adapter installed on your computer.How to AccessAt the Intel® PROSet/Wireless WiFi Connection Utility, Advanced Menu click Adapter Settings. Select theAdvanced tab.WiFi Adapter Settings DescriptionName Description802.11ac Mode(5GHz)The 802.11ac standard builds on 802.11n standard. 802.11ac Mode delivers up to 867Mbps(theoretical) by increasing channel bandwidth to 80MHz and adding higher densitymodulation (256 QAM). Select Enabled or Disabled to set the 802.11ac mode of the WiFiadapter. Enabled is the default setting. This setting applies to 802.11ac capable adaptersonly.802.11nChannel Width(2.4 GHz)Set high throughput channel width to maximize performance. Set the channel width toAuto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to802.11n capable adapters only.NOTE: This setting does not apply to the Intel® Wireless WiFi Link 4965AGN (uses 20 MHzchannel width only).802.11nChannel Width(5.2 GHz)Set high throughput channel width to maximize performance. Set the channel width toAuto or 20MHz. Use 20MHz if 802.11n channels are restricted. This setting applies to802.11n capable adapters only.NOTE: This setting does not apply to the following adapters:Intel® WiFi Link 1000Intel® Wireless WiFi Link 4965AGN802.11n Mode The 802.11n standard builds on previous 802.11 standards by adding multiple-inputmultiple-output (MIMO). MIMO increases data throughput to improve transfer rate. SelectEnabled or Disabled to set the 802.11n mode of the WiFi adapter. Enabled is the defaultsetting. This setting applies to 802.11n capable adapters only.NOTE: To achieve transfer rates greater than 54 Mbps on 802.11n connections, WPA2*-AES security must be selected. No security (None) can be selected to enable network setupand troubleshooting.An administrator can enable or disable support for high throughput mode to reduce power-consumption or conflicts with other bands or compatibility issues.Ad HocChannel802.11b/gSelect Enabled or Disabled.Ad Hoc QoSMode Quality of Service (QoS) control in ad hoc networks. QoS provides prioritization of trafficfrom the access point over a wireless LAN based on traffic classification. WMM (Wi-FiMultimedia) is the QoS certification of the Wi-Fi Alliance (WFA). When WMM is enabled, theWiFi adapter uses WMM to support priority tagging and queuing capabilities for Wi-Finetworks.WMM EnabledWMM Disabled (Default)
Bluetooth®AMP Enable or disable Bluetooth® AMP. AMP stands for alternate MAC/PHY and uses the 802.11(Wi-Fi) as the high-speed transport. If disabled, Bluetooth HS is turned off.HT Mode/VHTMode/Disabled This settings lets you select HT Mode (High Throughput mode), VHT Mode (Very HighThroughput Mode) or to disable both modes. HT Mode supports 802.11n compatibility,whereas VHT Mode supports 802.11ac compatibility.Fat ChannelIntolerant This setting communicates to access points that this WiFi adapter does not prefer 40MHzchannels in the 2.4GHz band. The default setting is for this to be turned off (disabled), sothat the adapter does not send this notification. If the access point continues to use 40MHzchannels, the WiFi adapter will also use 40MHz channels if the 802.11n Channel Width(2.4GHz) setting is AUTO.NOTE: This setting does not apply to the following adapters:Intel® Wireless WiFi Link 4965AG_Intel® PRO/Wireless 3945ABG Network ConnectionMixed modeprotection Use to avoid data collisions in a mixed 802.11b and 802.11g environment. Request toSend/Clear to Send (RTS/CTS) should be used in an environment where clients may nothear each other. CTS-to-self can be used to gain more throughput in an environment whereclients are in close proximity and can hear each other.Preferred Band In an environment with other radiating devices nearby (such as microwave ovens, cordlesstelephones, access points, or client devices), in order to reduce interference you may preferthe 5GHz band over the 2.4GHz band, or vice-versa. Your choices are:No PreferencePrefer 2.4GHz bandPrefer 5GHz bandHere are the various Wi-Fi bands:802.11 legacy - 2.4GHz802.11a - 5GHz802.11b - 2.4GHz802.11g - 2.4GHz802.11n - 2.4GHz and 5GHz802.11ac - 5GHz802.11ad - 60GHzRoamingAggressiveness This setting lets you define how aggressively your wireless client roams to improveconnection to an access point. There are five available settings.3. Medium: This is the default. A balanced setting between not roaming andperformance.1. Lowest: Your wireless client will not roam. Only significant link qualitydegradation causes it to roam to another access point.5. Highest: Your wireless client continuously tracks the link quality. If anydegradation occurs, it tries to find and roam to a better access point.TransmitPower Default Setting: Highest power setting.Lowest: Minimum Coverage: Set the adapter to the lowest transmit power. Enables youto expand the number of coverage areas or confine a coverage area. Reduces the coveragearea in high traffic areas to improve overall transmission quality and avoids congestion andinterference with other devices.Highest: Maximum Coverage: Set the adapter to a maximum transmit power level.Select for maximum performance and range in environments with limited additional WiFiradio devices.NOTE: The optimal setting is for a user to always set the transmit power at the lowest
possible level that is still compatible with the quality of their communication. This allows themaximum number of wireless devices to operate in dense areas and reduce interferencewith other devices that it shares the same radio spectrum with.NOTE: This setting takes effect when either Network (Infrastructure) or Device to Device(ad hoc) mode is used.Wake on MagicPacket This setting, enabled, wakes the computer from a sleep state when it receives a "magicpacket" from a sending computer. The magic packet contains the MAC address of theintended destination computer.Enabling turns on Wake on Magic Packet. Disabling turns off Wake on Magic Packet.Disabling this only disables the magic packet feature, not Wake on Wireless LAN.Wake onPattern Match This feature wakes the computer from a sleep state when a particular wake pattern isreceived at the adapter. This feature is supported by the Window* 7 and Windows 8. Suchpatterns typically are:Wake on new incoming TCP connection for IPv4 and IPv6 (TCP SYN IPv4 and TCP SYNIPv6).Wake on 802.1x re-authentication packets.Disabling this only disables the pattern match feature, not Wake on Wireless LAN.Wireless Mode Select which mode to use for connection to a wireless network:802.11a only: Connect the wireless WiFi adapter to 802.11a networks only. Notapplicable for all adapters.802.11b only: Connect the wireless WiFi adapter to 802.11b networks only. Notapplicable for all adapters.802.11g only: Connect the wireless WiFi adapter to 802.11g networks only.802.11a and 802.11g: Connect the WiFi adapter to 802.11a and 802.11g networksonly. Not applicable for all adapters.802.11b and 802.11g: Connect the WiFi adapter to 802.11b and 802.11g networksonly. Not applicable for all adapters.802.11a, 802.11b, and 802.11g: (Default) - Connect to either 802.11a, 802.11bor 802.11g wireless networks. Not applicable for all adapters.OK Saves settings and returns to the previous page.Cancel Closes and cancels any changes.Back to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsRegulatory InformationThis section provides regulatory information for the following wireless adapters:Intel® Centrino® Wireless-N 100Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 130Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 1000Intel® Centrino® Wireless-N 1030Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Wireless-N + WiMAX 6150Intel® Centrino® Advanced-N 6200Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6230Intel® Centrino® Advanced-N 6235Intel® Centrino® Advanced-N + WiMAX 6250Intel® Centrino® Ultimate-N 6300Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 3168Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260Intel® Dual Band Wireless-AC 8265Intel® Wireless-AC 9260Intel® Wireless-AC 9560Intel® Tri-Band Wireless-AC 17265Intel® Tri-Band Wireless-AC 18260Intel® Tri-Band Wireless-AC 18265Intel® Wireless Gigabit Sink W13100Intel® Wireless Gigabit 11000NOTE: Due to the evolving state of regulations and standards in the wireless LAN field (IEEE 802.11 andsimilar standards), the information provided herein is subject to change. Intel Corporation assumes noresponsibility for errors or omissions in this document.Intel WiFi/WiMAX Wireless AdaptersInformation in this section supports the following wireless adapters:Intel® Centrino® Wireless-N + WiMAX 6150Intel® Centrino® Advanced-N + WiMAX 6250See Specifications for complete wireless adapter specifications.NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.The following information is provided:Information for the UserRegulatory InformationRegulatory ID
Information for OEMs and Host IntegratorsINFORMATION FOR THE USERSafety NoticesUSA FCC Radio Frequency ExposureThe FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposurerequirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217.Proper operation of this radio according to the instructions found in this manual will result in exposure substantiallybelow the FCC’s recommended limits.The following safety precautions should be observed:Do not touch or move antenna while the unit is transmitting or receiving.Do not hold any component containing the radio such that the antenna is very close or touching any exposedparts of the body, especially the face or eyes, while transmitting.Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may causedamage to the radio.Use in specific environments:The use of wireless adapters in hazardous locations is limited by the constraints posed by the safetydirectors of such environments.The use of electronic devices equipped with wireless adapters on airplanes is governed by rules for eachcommercial airline operator.The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting capsor in an explosive environment unless the transmitter has been modified to be qualified for such use.Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas.Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronicdevices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere withcritical aircraft instruments. Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integratorsshould consider this FCC rule in host devices.Other Wireless DevicesSafety Notices for Other Devices in the Wireless Network: See the documentation supplied with wirelessadapters or other devices in the wireless network.Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac, and 802.16e Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, 802.11ac,and 802.16e wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g,802.11n, 802.11ac, and 802.16e products are designed for use only in specific countries, and are not allowed to beoperated in countries other than those of designated use. As a user of these products, you are responsible for
ensuring that the products are used only in the countries for which they were intended and for verifying that they areconfigured with the correct selection of frequency and channel for the country of use. The device transmit powercontrol (TPC) interface is part of the Intel® PROSet/Wireless WiFi Connection Utility Software. Operationalrestrictions for Equivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviationfrom the permissible power and frequency settings for the country of use is an infringement of national law and maybe punished as such.Wireless InteroperabilityThe wireless adapter is designed to be interoperable with other wireless LAN products that are based on directsequence spread spectrum (DSSS) radio technology and to comply with the following standards:IEEE Std. 802.11b compliant Standard on Wireless LANIEEE Std. 802.11g compliant Standard on Wireless LANIEEE Std. 802.11a compliant Standard on Wireless LANIEEE Std. 802.11n draft 2.0 compliant on Wireless LANIEEE 802.16e-2005 Wave 2 compliantWireless Fidelity certification, as defined by the Wi-Fi AllianceWiMAX certification as defined by the WiMAX ForumThe Wireless Adapter and Your HealthThe wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energyemitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devicessuch as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standardsand recommendations. These standards and recommendations reflect the consensus of the scientific community andresult from deliberations of panels and committees of scientists who continually review and interpret the extensiveresearch literature. In some situations or environments, the use of the wireless adapter may be restricted by theproprietor of the building or responsible representatives of the applicable organization. Examples of such situationsmay include:Using the wireless adapter on board airplanes, orUsing the wireless adapter in any other environment where the risk of interference with other devices orservices is perceived or identified as being harmful.If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization orenvironment (an airport, for example), you are encouraged to ask for authorization to use the adapter before youturn it on.REGULATORY INFORMATIONUSA - Federal Communications Commission (FCC)This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHzfrequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in thefrequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCCrules.Intel® wireless adapters are intended for OEM integrators only.Intel® wireless adapters cannot be co-located with any other transmitter unless approved by the FCC.This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following twoconditions:This device may not cause harmful interference.This device must accept any interference that may cause undesired operation.Class B Device Interference StatementThis wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wirelessadapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmfulinterference to radio communications. There is no guarantee, however, that such interference will not occur in aparticular installation. If this wireless adapter does cause harmful interference to radio or television reception (whichcan be determined by turning the equipment off and on), the user is encouraged to try to correct the interference bytaking one or more of the following measures:Reorient or relocate the receiving antenna of the equipment experiencing the interference.Increase the distance between the wireless adapter and the equipment experiencing the interference.Connect the computer with the wireless adapter to an outlet on a circuit different from that to which theequipment experiencing the interference is connected.Consult the dealer or an experienced radio/TV technician for help.NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructionsas described in the user documentation that comes with the product. Any other installation or use willviolate FCC Part 15 regulations.Safety Approval ConsiderationsThis device has been safety approved as a component and is for use only in complete equipment where theacceptability of the combination is determined by the appropriate safety agencies. When installed, considerationmust be given to the following:It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd editionincluding the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).The device shall be supplied by a SELV source when installed in the end-use equipment.A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-12nd edition.Low HalogenApplies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intelcomponents as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may notbe better for the environment.Japan5GHz 帯は室内でのみ使用のことKorea해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음.해당 무선 설비는 5150-5250MHz 대역에서 실내에서만 사용할 수 있음.MexicoLa operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivono cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo laque pueda causar su operación no deseada.Taiwan
第十二條經型式認識合格之低功率射頻電機. 非經許可  公司、 商號或使用者均不得擅自變更頻率‵ 加大功率或變更原設計之特性及功能.第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信 經發現有干擾現象時 應立即停用 並改善至無干擾時方得繼續使用。前項合法通信, 指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備 限於室內使用。Radio ApprovalsTo determine whether you are allowed to use your wireless network device in a specific country, please check to seeif the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEMRegulatory Guidance document.Modular Regulatory Certification Country MarkingsA list of countries requiring regulatory markings is available. Note that the lists include only countries requiringmarking but not all certified countries. To find the regulatory country marking information for your adapter, performthese steps:1.  Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html2.  Click on the link for your adapter.3.  Click on Regulatory Marking Document for your adapter.INFORMATION FOR OEMs and HOST INTEGRATORSThe guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters innotebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions ofcompliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described hereinare fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with nofurther restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM orintegrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible todetermine the required host regulatory testing and/or obtaining the required host approvals for compliance.Intel® wireless adapters are intended for OEMs and host integrators only.The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.The Intel® wireless adapters must be operated with an access point that has been approved for the country ofoperation.Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is notpermitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third partieswill void authorization to operate the adapter.Antenna Type and GainsOnly antennas of the same type and with equal or less gains as shown below may be used with the Intel® wirelessadapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation.AntennaType AntennaLocation(Main/Aux)2.4GHzPeak Gainin dBi*2.6GHzPeak Gainin dBi*5.2GHzPeak Gainin dBi*5.5GHzPeak Gainin dBi*5.7GHzPeak Gainin dBi*PIFA Main
Aux 3.24 3.47 3.73 4.77 4.77MIMO*All antenna gains include cable loss.Antenna Placement Within the Host PlatformTo ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed innotebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operatingmodes and orientations of the host platform, with strict adherence to the table below. The antenna separationdistance applies to both horizontal and vertical orientation of the antenna when installed in the host system.Intel® Wireless Adapter Minimum required antenna-to-user separation distanceIntel® Centrino® Wireless-N + WiMAX 6150 18 mmIntel® Centrino® Wireless-N + WiMAX 6350 17 mmSimultaneous Transmission of Intel® Wireless Adapters with Other Integrated orPlug-In TransmittersBased upon FCC Knowledge Database publication number 616217 when there are multiple transmitting devicesinstalled in a host device, an RF exposure transmitting assessment shall be performed to determine the necessaryapplication and test requirements. OEM integrators must identify all possible combinations of simultaneoustransmission configurations for all transmitters and antennas installed in the host system. This includes transmittersinstalled in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation fromuser). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessmentto determine if any additional requirements for testing or FCC approval is necessary.Information To Be Supplied to the End User by the OEM or IntegratorThe following regulatory and safety notices must be published in documentation supplied to the end user of theproduct or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system mustbe labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer's instructions asdescribed in the user documentation that comes with the product. Intel Corporation is not responsible for any radioor television interference caused by unauthorized modification of the devices included with the wireless adapter kit orthe substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation.The correction of interference caused by such unauthorized modification, substitution or attachment is theresponsibility of the user. Intel Corporation and authorized resellers or distributors are not liable for any damage orviolation of government regulations that may arise from the user failing to comply with these guidelines.Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio UsageThe following statement on local restrictions must be published as part of the compliance documentation for all802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16ewireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g, 802.11n, and 802.16eproducts are designed for use only in specific countries, and are not allowed to be operated in countries other thanthose of designated use. As a user of these products, you are responsible for ensuring that the products are usedonly in the countries for which they were intended and for verifying that they are configured with the correctselection of frequency and channel for the country of use. Any deviation from the permissible power and frequencysettings for the country of use is an infringement of national law and may be punished as such.
Intel WiFi Adapters, 802.11n and 802.11ac CompliantThe information in this section applies to the following products:Intel® Centrino® Wireless-N 100Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 130Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 1000Intel® Centrino® Wireless-N 1030Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Advanced-N 6200Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6230Intel® Centrino® Advanced-N 6235Intel® Centrino® Ultimate-N 6300Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 3168Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260Intel® Dual Band Wireless-AC 8265Intel® Wireless-AC 9260Intel® Wireless-AC 9560Intel® Tri-Band Wireless-AC 17265Intel® Tri-Band Wireless-AC 18260Intel® Tri-Band Wireless-AC 18265Intel® Wireless Gigabit Sink W13100Intel® Wireless Gigabit 11000See Specifications for complete wireless adapter specifications.NOTE: In this section, all references to the "wireless adapter" refer to all adapters listed above.The following information is provided:Information for the UserRegulatory InformationRegulatory IDInformation for OEMs and Host IntegratorsStatements of European ComplianceINFORMATION FOR THE USERSafety NoticesUSA FCC Radio Frequency ExposureThe FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF)electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposurerequirements found in FCC Part 2, 15C, 15E along with guidance from KDB 447498, KDB 248227 and KDB 616217.Proper operation of this radio according to the instructions found in this manual will result in exposure substantiallybelow the FCC’s recommended limits.
The following safety precautions should be observed:Do not touch or move antenna while the unit is transmitting or receiving.Do not hold any component containing the radio such that the antenna is very close or touching any exposedparts of the body, especially the face or eyes, while transmitting.Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may causedamage to the radio.Use in specific environments:The use of wireless adapters in hazardous locations is limited by the constraints posed by the safetydirectors of such environments.The use of wireless adapters on airplanes is governed by the Federal Aviation Administration (FAA).The use of wireless adapters in hospitals is restricted to the limits set forth by each hospital.Explosive Device Proximity Warning Warning: Do not operate a portable transmitter (including this wireless adapter) near unshielded blasting capsor in an explosive environment unless the transmitter has been modified to be qualified for such use.Antenna Warnings Warning: The wireless adapter is not designed for use with high-gain directional antennas.Use On Aircraft Caution Caution: Regulations of commercial airline operators may prohibit airborne operation of certain electronicdevices equipped with radio-frequency wireless devices (wireless adapters) because their signals could interfere withcritical aircraft instruments. Caution: 60 GHz/802.11ad equipment is not permitted on aircraft per FCC §15.255. OEM and host integratorsshould consider this FCC rule in host devices.Other Wireless DevicesSafety Notices for Other Devices in the Wireless Network: See the documentation supplied with wirelessadapters or other devices in the wireless network.Local Restrictions on 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and 802.11ac Radio Usage Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11d, 802.11g, 802.11n, and802.11ac wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11d, 802.11g,802.11n, and 802.11ac products are designed for use only in specific countries, and are not allowed to be operatedin countries other than those of designated use. As a user of these products, you are responsible for ensuring thatthe products are used only in the countries for which they were intended and for verifying that they are configuredwith the correct selection of frequency and channel for the country of use. The device transmit power control (TPC)interface is part of the Intel® PROSet/Wireless WiFi Connection Utility Software. Operational restrictions forEquivalent Isotropic Radiated Power (EIRP) are provided by the system manufacturer. Any deviation from thepermissible power and frequency settings for the country of use is an infringement of national law and may bepunished as such.Wireless InteroperabilityThe wireless adapter is designed to be interoperable with other wireless LAN products that are based on directsequence spread spectrum (DSSS) radio technology and to comply with the following standards:IEEE Std. 802.11b compliant Standard on Wireless LANIEEE Std. 802.11g compliant Standard on Wireless LANIEEE Std. 802.11a compliant Standard on Wireless LANIEEE Std. 802.11n compliant Standard on Wireless LAN
IEEE Std. 802.11ac draft compliant on Wireless LANWireless Fidelity certification, as defined by the Wi-Fi AllianceThe Wireless Adapter and Your HealthThe wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energyemitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devicessuch as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standardsand recommendations. These standards and recommendations reflect the consensus of the scientific community andresult from deliberations of panels and committees of scientists who continually review and interpret the extensiveresearch literature. In some situations or environments, the use of the wireless adapter may be restricted by theproprietor of the building or responsible representatives of the applicable organization. Examples of such situationsmay include:Using the wireless adapter on board airplanes, orUsing the wireless adapter in any other environment where the risk of interference with other devices orservices is perceived or identified as being harmful.If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization orenvironment (an airport, for example), you are encouraged to ask for authorization to use the adapter before youturn it on.REGULATORY INFORMATIONUSA - Federal Communications Commission (FCC)This wireless adapter is restricted to indoor use due to its operation in the 5.15 to 5.25 and 5.470 to 5.75GHzfrequency ranges. No configuration controls are provided for Intel® wireless adapters allowing any change in thefrequency of operations outside the FCC grant of authorization for U.S. operation according to Part 15.407 of the FCCrules.Intel® wireless adapters are intended for OEM integrators only.Intel® wireless adapters cannot be co-located with any other transmitter unless approved by the FCC.This wireless adapter complies with Part 15 of the FCC Rules. Operation of the device is subject to the following twoconditions:This device may not cause harmful interference.This device must accept any interference that may cause undesired operation.NOTE: The radiated output power of the adapter is far below the FCC radio frequency exposure limits.Nevertheless, the adapter should be used in such a manner that the potential for human contact duringnormal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposurelimits, you should keep a distance of at least 20cm between you (or any other person in the vicinity), orthe minimum separation distance as specified by the FCC grant conditions, and the antenna that is builtinto the computer. Details of the authorized configurations can be found at http://www.fcc.gov/oet/ea/by entering the FCC ID number on the device.Class B Device Interference StatementThis wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This wireless adapter generates, uses, and can radiate radio frequency energy. If the wirelessadapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmfulinterference to radio communications. There is no guarantee, however, that such interference will not occur in aparticular installation. If this wireless adapter does cause harmful interference to radio or television reception (whichcan be determined by turning the equipment off and on), the user is encouraged to try to correct the interference bytaking one or more of the following measures:Reorient or relocate the receiving antenna of the equipment experiencing the interference.
Increase the distance between the wireless adapter and the equipment experiencing the interference.Connect the computer with the wireless adapter to an outlet on a circuit different from that to which theequipment experiencing the interference is connected.Consult the dealer or an experienced radio/TV technician for help.NOTE: The adapter must be installed and used in strict accordance with the manufacturer's instructionsas described in the user documentation that comes with the product. Any other installation or use willviolate FCC Part 15 regulations.Safety Approval ConsiderationsThis device has been safety approved as a component and is for use only in complete equipment where theacceptability of the combination is determined by the appropriate safety agencies. When installed, considerationmust be given to the following:It must be installed into a compliant host device meeting the requirement of UL/EN/IEC 60950-1 2nd editionincluding the general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 (Fire Enclosure).The device shall be supplied by a SELV source when installed in the end-use equipment.A heating test shall be considered in the end-use product for meeting the requirement of UL/EN/IEC 60950-12nd edition.Low HalogenApplies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intelcomponents as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB /substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may notbe better for the environment.Canada – Industry Canada (IC)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following twoconditions: (1) this device may not cause interference, and (2) this device must accept any interference, includinginterference that may cause undesired operation of the device.Cet appareil se conforme aux normes Canada d'Industrie de RSS permis-exempt. L'utilisation est assujetti aux deuxconditions suivantes: (1) cet appareil ne peut pas causer d'interférences, et (2) cet appareil doit accepter desinterférences , y compris des interférences qui peuvent causer desopérations non désirées de l'appareil.Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequencyrange of 5.15GHz to 5.25GHz to reduce the potential for harmful interference to co-channel mobile satellite systems.High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radarstations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use withthis device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85GHz frequencyrange in point-to-point operation. To comply with RF exposure requirements all antennas should be located at aminimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body ofall persons.Attention: l'utilisation d'un réseau sans fil IEEE802.11a est restreinte à une utilisation en intérieur à cause dufonctionnement dans la bande de fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilisé àl'intérieur des bâtiments pour la bande de fréquence 5.15-5.25 GHz afin de réduire les possibilités d'interférencesnuisibles aux canaux co-existants des systèmes de transmission satellites. Les radars de puissances ont fait l'objetd'une allocation primaire de fréquences dans les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuventcréer des interférences avec ce produit et/ou lui être nuisible. Le gain d'antenne maximum permissible pour uneutilisation avec ce produit est de 6 dBi afin d'être conforme aux limites de puissance isotropique rayonnéeéquivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point-à-point.Pour se conformer aux conditions d'exposition de RF toutes les antennes devraient être localisées à une distanceminimum de 20 cm, ou la distance de séparation minimum permise par l'approbation du module, du corps de toutes
les personnes.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type andmaximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference toother users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power(e.i.r.p.) is not more than that necessary for successful communication.Selon les règlements de Canada d'Industrie, cet émetteur de radio peut seulement fonctionner en utilisant uneantenne du type et de gain maximum (ou moindre) que le gain approuvé pour l'émetteur par Canada d'Industrie.Pour réduire lesinterférences radio potentielles avec les autres utilisateurs, le type d'antenne et son gain devraientêtre choisis de façon à ce que la puissance isotrope rayonnée équivalente(P.I.R.E.) ne soit pas supérieure à celle quiest nécessaire pour une communication réussie.European UnionThe low band 5.15 - 5.35GHz is for indoor use only.This equipment complies with the essential requirements of the European Union directive 2014/53/EU. SeeStatements of European Union Compliance.European Union Declarations of ConformityTo view the European Union Declaration of Conformity for your adapter, perform these steps.1.  Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html2.  Click on "User Guide."3.  Scroll to your adapter.To view additional regulatory information for your adapter, perform these steps:1.  Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html2.  Click on the link for your adapter.3.  Click on Regulatory Marking Document for your adapter.Waste Electrical and Electronic Equipment Directive (WEEE)Restriction of Hazardous Substances Directive (RoHS) Compliant
All products described herein are compliant with the European Union's RoHS Directive.For CE Mark-Related Questions related to the wireless adapter, contact:Intel Corporation Attn: Corporate Quality 2200 Mission College Blvd. Santa Clara, CA 95054-1549 USAJapan5GHz 帯は室内でのみ使用のことKorea해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음.해당 무선 설비는 5150-5250MHz 대역에서 실내에서만 사용할 수 있음.MexicoLa operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivono cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo laque pueda causar su operación no deseada.MoroccoThe operation of this product in the radio channel 2 (2417 MHz) is not authorized in the following cities: Agadir,Assa-Zag, Cabo Negro, Chaouen, Goulmima, Oujda, Tan Tan, Taourirt, Taroudant and Taza.The operation of this product in the radio channels 4, 5, 6 et 7 (2425 - 2442 MHz) is not authorized in the followingcities: Aéroport Mohamed V, Agadir, Aguelmous, Anza, Benslimane, Béni Hafida, Cabo Negro, Casablanca, Fès,Lakbab, Marrakech, Merchich, Mohammédia, Rabat, Salé, Tanger, Tan Tan, Taounate, Tit Mellil, Zag.Pakistan"PTA APPROVED MODEL"Taiwan第十二條經型式認識合格之低功率射頻電機. 非經許可  公司、 商號或使用者均不得擅自變更頻率‵ 加大功率或變更原設計之特性及功能.第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信 經發現有干擾現象時 應立即停用 並改善至無干擾時方得繼續使用。前項合法通信, 指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備 限於室內使用。Singapore
Radio ApprovalsTo determine whether you are allowed to use your wireless network device in a specific country, please check to seeif the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEMRegulatory Guidance document.Modular Regulatory Certification Country MarkingsA list of countries requiring regulatory markings is available. Note that the lists include only countries requiringmarking but not all certified countries. To find the regulatory country marking information for your adapter, performthese steps:1.  Open this web site: http://www.intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000007443.html2.  Click on the link for your adapter.3.  Click on Regulatory Marking Document for your adapter.Regulatory IDEurope: Models 3160HMW, 3160NGW, 3160SDW, 3165NGW, 7260SDW, 7260NGW, 7260HMW, 7265D2W,7265NGW, 8260D2W, 8260NGW, 8260NGWH, 18260NGWSoftware Version Intel® PROSet/Wireless WiFi Software 19.x and previous versions(WiFi/BT)Intel® Wireless Dock Manager 3.x and previous versions (WiGig)Maximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/n mode 20dBm EIRP max (100mW)(2400 - 2483.5 MHz)BLE / Bluetooth 10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/acmode13.98 dBm EIRP Max (25mW)(57 - 64 GHz)IEEE802.11 ad mode 25 dBm EIRP maxThis equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Intel® Dual Band Wireless-AC 3165Due to the very small size of the 3165D2W/3165NGW (12x16), the marking has been placed in this user manualbecause the product label on the device is considered too small to be readable.USA: Model 3165D2W, FCC ID: PD93165D2Canada: Model 3165D2W, IC: 1000M-3165D2Japan: Model 3165D2W:Korea: Model 3165D2W, MSIP-CRM-INT-7265D2WTaiwan: Model 3165D2W,China: Model 3165D2W, CMIIT ID: 2015AJ3466 (M)Europe: Model 3165D2WSoftware Version Intel® PROSet/Wireless WiFi Software 19.x and previousversionsMaximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/n mode 20dBm EIRP max (100mW)(2400 - 2483.5 MHz)Bluetooth/BLE 10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/acmode13.98 dBm EIRP Max (25mW)This equipment complies with the essential requirements of the European Union directive 2014/53/EU.
Australia: Model 3165D2WSingapore: Model 3165D2WArgentina:Model 3165D2W,Model 3165NGW,Intel® Dual Band Wireless-AC 3168Due to the very small size of the 3168NGW, the marking has been placed in this user manual because the productlabel on the device is considered too small to be readable.Europe: Model 3168NGWSoftware Version Intel® PROSet/Wireless WiFi Software 19.x and previousversionsMaximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/n mode 20dBm EIRP max (100mW)
(2400 - 2483.5 MHz)Bluetooth/BLE10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/acmode13.98 dBm EIRP Max (25mW)This equipment complies with the essential requirements of the European Union directive 2014/53/EU.Argentina: Model 3168NGW,Intel® Dual Band Wireless-AC 7265Due to the very small size of the 7265D2W (12x16), the marking has been placed in this user manual because theproduct label on the device is considered too small to be readable.USA: Model 7265D2W, FCC ID: PD97265D2Canada: Model 7265D2W, IC: 1000M-7265D2Japan: Model 7265D2W:Korea: Model 7265D2W, MSIP-CRM-INT-7265D2WTaiwan: Model 7265D2W,China: Model 7265D2W, CMIIT ID: 2014AJ3467 (M)Australia: Model 7265D2W,
Argentina: Model 7265D2W,Intel® Wireless Gigabit Sink W13100Due to the very small size of the 13100NGW, the marking has been placed in this user manual because the productlabel on the device is considered too small to be readable.Europe: Model 13100NGWSoftware Version Intel® Wireless Dock Manager 3.x and previous versionsMaximum Power Output(57 - 64 GHz)IEEE802.11 ad mode 25 dBm EIRP maxThis equipment complies with the essential requirements of the European Union directive 2014/53/EU.Singapore: Model 13100NGWIntel® Tri-Band Wireless-AC 17265Due to the very small size of the 17265NGW, the marking has been placed in this user manual because the productlabel on the device is considered too small to be readable.Europe: Model 17265NGWSoftware Version Intel® PROSet/Wireless WiFi Software 19.x and previous versions(WiFi/BT)
Intel® Wireless Dock Manager 3.x and previous versions (WiGig)Maximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/nmodeBluetooth20dBm EIRP max (100mW)(2400 - 2483.5 MHz)BLE 10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/acmode13.98 dBm EIRP Max (25mW)(57 - 64 GHz)IEEE802.11 ad mode 25 dBm EIRP maxThis equipment complies with the essential requirements of the European Union directive 2014/53/EU.Singapore: Model 17265NGWIntel® Dual Band Wireless-AC 8260Due to the very small size of the 8260D2W (12x16), the marking has been placed in this user manual because theproduct label on the device is considered too small to be readable.USA: Model 8260D2W, FCC ID: PD98260D2 (FCC ID without suffix "U" denotes factory installation only);FCC ID: PD98260D2U (FCC ID with suffix “U” denotes user installation or replacement permitted andsupported by bios locking feature)Canada: Model 8260D2W, IC: 1000M-8260D2Japan: Model 8260D2W:
Korea: Model 8260D2W, MSIP-CRM-INT-8260D2WTaiwan: Model 8260D2W,China: Model 8260D2W, CMIIT ID: 2014AJ3467 (M)Australia: Model 8260D2W,Argentina: Model 8260D2W,Due to the very small size of the 8260NGWH/8260NGW, the marking has been placed in this user manual becausethe product label on the device is considered too small to be readable.Argentina: Model 8260NGWH,Argentina: Model 8260NGW,Intel® Dual Band Wireless-AC 8265
Due to the very small size of the 8265NGW (22mm x 30mm x 2.4mm), the marking has been placed in this usermanual because the product label on the device is considered too small to be readable.USA: Model 8265NGWFCC ID: PD98265NG (FCC ID without suffix "U" denotes factory installation only)FCC ID: PD98265NGU (FCC ID with suffix “U” denotes user installation or replacement permittedand supported by BIOS locking feature)Canada: Model 8265NGW, IC: 1000M-8265NGJapan: Model 8265NGW:RF 003-160104TEL D160055003Korea: Model 8265NGW, MSIP-CRM-INT-8265NGW,Taiwan: Model 8265NGWChina: Model 8265NGWEurope: Models 8265NGW, 8265D2WSoftware Version Intel® PROSet/Wireless WiFi Software 19.x and previousversionsMaximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/n modeBluetooth20dBm EIRP max (100mW)(2400 - 2483.5 MHz)BLE 10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/ac 13.98 dBm EIRP Max (25mW)
mode(57 - 64 GHz)IEEE802.11 ad mode 25 dBm EIRP maxThis equipment complies with the essential requirements of the European Union directive 2014/53/EU.Australia: Model 8265NGW,Brazil: Model 8265NGW: ANATEL: XXXXXXXXXX,Argentina: Model 8265NGW,Singapore: Model 8265NGW:Pakistan: Model 8265NGW"PTA APPROVED MODEL"Due to the very small size of the 8265D2W (12mm x 16mm x 1.8mm), the marking has been placed in this usermanual because the product label on the device is considered too small to be readable.USA: Model 8265D2W, FCC ID: PD98265D2Canada: Model 8265D2W, IC: 1000M-8265D2Japan: Model 8265D2W:RF 003-160129TEL D160076003
Korea: Model 8265D2W, MSIP-CRM-INT-8265D2W,Taiwan: Model 8265D2WChina: Model 8265D2WAustralia: Model 8265D2W,Brazil: Model 8265D2W: ANATEL: XXXXXXXXXX,Argentina: Model 8265D2W,Singapore: Model 8265D2W:Pakistan: Model 8265D2W"PTA APPROVED MODEL"
Intel® Tri-band Wireless AC 18265Due to the very small size of the 18265NGW module, the regulatory marking has been placed in this user manualbecause the product label on the device is considered too small to be readableUSA: Model 18265NGW, FCC ID: PD918265NG (This module is for factory installation only)Canada: Model 18265NGW, IC : 1000M-18265NGJapan: Model 18265NGWKorea: Model 18265NGW, MSIP-CRM-INT-18265NGWTaiwan: Model 18265NGWChina: Model 18265NGW, CMIIT ID: 2016AJ7066 (M)Europe: Model 18265NGW,Software Version Intel® PROSet/Wireless WiFi Software 19.x and previous versions(WiFi/BT)Intel® Wireless Dock Manager 3.x and previous versions (WiGig)Maximum Power Output(2400 - 2483.5 MHz)IEEE802.11 b/g/nmodeBluetooth20dBm EIRP max (100mW)(2400 - 2483.5 MHz)BLE 10dBm EIRP max (10mW)(5150 - 5725 MHz)IEEE802.11 a/n/acmode23dBm EIRP max (200mW)The low band 5.15 - 5.35 GHz is for indoor use only(5725 - 5875 MHz)IEEE802.11 a/n/acmode13.98 dBm EIRP Max (25mW)(57 - 64 GHz) 25 dBm EIRP max
IEEE802.11 ad modeThis equipment complies with the essential requirements of the European Union directive 2014/53/EU.Australia: Model 18265NGW,Brazil: Model 18265NGW, ANATEL: XXXXXXXXXXXXXSingapore: Model 18265NGW,Intel® Wireless Gigabit 11000Due to the very small size of the 11000D2W/11000D2W LC, the marking has been placed in this user manualbecause the product label on the device is considered too small to be readable.USA: Model 11000D2W and 11000D2W LC, FCC ID: PD911000D2Canada: Model 11000D2W, IC: 1000M-11000D2Japan: Model 11000D2W:Korea: Model 11000D2W, MSIP-CRM-INT-11000D2WTaiwan: Model 11000D2W and 11000D2W LC,
China: Model 11000D2W, CMIIT ID: 2016DJ0267 (M); Model 11000D2W LC, CMIIT ID: 2016DJ0268 (M)Europe: Model 11000D2WSoftware Version Intel® Wireless Dock Manager 3.x and previous versionsMaximum Power Output(57 - 64 GHz)IEEE802.11 ad mode 25 dBm EIRP maxAustralia: Model 11000D2W,Singapore: Model 11000D2W/11000D2W LC:INFORMATION FOR OEMS and HOST INTEGRATORSThe guidelines described within this document are provided to OEM integrators installing Intel® wireless adapters innotebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the conditions ofcompliance with FCC rules, including RF exposure. When all antenna type and placement guidelines described hereinare fulfilled the Intel® wireless adapters may be incorporated into notebook and tablet PC host platforms with nofurther restrictions. If any of the guidelines described herein are not satisfied it may be necessary for the OEM orintegrator to perform additional testing and/or obtain additional approval. The OEM or integrator is responsible todetermine the required host regulatory testing and/or obtaining the required host approvals for compliance.Intel® wireless adapters are intended for OEMs and host integrators only.The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular approval.The Intel® wireless adapters must be operated with an access point that has been approved for the country ofoperation.Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is notpermitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third partieswill void authorization to operate the adapter.
Antenna Type and GainsOnly antennas of the same type and with equal or less gains as shown below may be used with the Intel® wirelessadapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation.AntennaType AntennaLocation(Main/Aux)2.4GHzPeak Gainin dBi*2.6GHzPeak Gainin dBi*5.2GHzPeak Gainin dBi*5.5GHzPeak Gainin dBi*5.7GHzPeak Gainin dBi*PIFA MainAux 3.24 3.47 3.73 4.77 4.77MIMO*All antenna gains include cable loss.Antenna Placement Within the Host PlatformTo ensure RF exposure compliance the antenna(s) used with the Intel® wireless adapters must be installed innotebook or tablet PC host platforms to provide a minimum separation distance from all persons, in all operatingmodes and orientations of the host platform, with strict adherence to the table below. The antenna separationdistance applies to both horizontal and vertical orientation of the antenna when installed in the host system.Wireless Adapter Minimum required antenna-to-user separation distanceIntel® Centrino® Wireless-N 100 9 mmIntel® Centrino® Wireless-N 105 9 mmIntel® Centrino® Wireless-N 130 8 mmIntel® Centrino® Wireless-N 135 9 mmIntel® Centrino® Wireless-N 1000* 20 mmIntel® Centrino® Wireless-N 1030 8 mmIntel® Centrino® Wireless-N 2200 9 mmIntel® Centrino® Wireless-N 2230 6 mmIntel® Centrino® Advanced-N 6200* 20 mmIntel® Centrino® Advanced-N 6205 12 mmIntel® Centrino® Advanced-N 6230 12 mmIntel® Centrino® Advanced-N 6235 8 mmIntel® Centrino® Ultimate-N 6300 13 mmIntel® Dual Band Wireless-AC 7260 8 mmIntel® Dual Band Wireless-N 7260 8 mmIntel® Wireless-N 7260 8 mmIntel® Dual Band Wireless-AC 3160 8 mmIntel® Dual Band Wireless-AC 3165 8 mmIntel® Dual Band Wireless-AC 7265 8 mmIntel® Dual Band Wireless-N 7265 8 mmIntel® Wireless-N 7265 8 mmIntel® Dual Band Wireless-AC 8260 8 mmIntel® Dual Band Wireless-AC 8265 8 mmIntel® Wireless-AC 9260 8 mmIntel® Wireless-AC 9560 8 mmIntel® Tri-Band Wireless-AC 17265 8 mm
Intel® Tri-Band Wireless-AC 18260 8 mmIntel® Tri-Band Wireless-AC 18265 8 mmIntel® Wireless Gigabit Sink W13100 8 mmIntel® Wireless Gigabit 11000 8 mm* This wireless adapter may be installed in mobile devices only (requires > 20 cm antenna separation from thebody of user).For WiFi/Bluetooth combination adapters it is recommended that a 5 cm separation distance between transmittingantennas be provided within the host system to maintain an adequate separation ratio for simultaneous WiFi andBluetooth transmission. For less than 5 cm separation the separation ratio must be verified according to FCCpublication KDB 447498 for the specific adapter.Additional regulatory authorization process may be required if wishing to place the 60 GHz/802.11ad RFEM (antennaarray) closer than 20 cm to the user.Simultaneous Transmission of Intel® Wireless Adapters with Other Integrated orPlug-In TransmittersBased upon FCC Knowledge Database publication number 616217, when there are multiple transmitting devicesinstalled in a host device, an RF exposure transmitting assessment shall be performed to determine the necessaryapplication and test requirements. OEM integrators must identify all possible combinations of simultaneoustransmission configurations for all transmitters and antennas installed in the host system. This includes transmittersinstalled in the host as mobile devices (>20 cm separation from user) and portable devices (<20 cm separation fromuser). OEM integrators should consult the actual FCC KDB 616217 document for all details in making this assessmentto determine if any additional requirements for testing or FCC approval is necessary.Information To Be Supplied to the End User by the OEM or IntegratorThe following regulatory and safety notices must be published in documentation supplied to the end user of theproduct or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system mustbe labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.The wireless adapter must be installed and used in strict accordance with the manufacturer's instructions asdescribed in the user documentation that comes with the product. For country-specific approvals, see RadioApprovals. Intel Corporation is not responsible for any radio or television interference caused by unauthorizedmodification of the devices included with the wireless adapter kit or the substitution or attachment of connectingcables and equipment other than that specified by Intel Corporation. The correction of interference caused by suchunauthorized modification, substitution or attachment is the responsibility of the user. Intel Corporation andauthorized resellers or distributors are not liable for any damage or violation of government regulations that mayarise from the user failing to comply with these guidelines.Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad Radio UsageThe following statement on local restrictions must be published as part of the compliance documentation for all802.11a, 802.11b, 802.11g, 802.11n, and 802.11ad products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11adwireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n productsare designed for use only in specific countries, and are not allowed to be operated in countries other than those ofdesignated use. As a user of these products, you are responsible for ensuring that the products are used only in thecountries for which they were intended and for verifying that they are configured with the correct selection offrequency and channel for the country of use. Any deviation from permissible settings and restrictions in the countryof use could be an infringement of national law and may be punished as such.
Statements of European ComplianceEach of the adapters listed below comply with the essential requirements of the European Union directive2014/53/EU.Intel® Centrino® Wireless-N 100Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 130Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 1000Intel® Centrino® Wireless-N 1030Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Advanced-N 6200Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6230Intel® Centrino® Advanced-N 6235Intel® Centrino® Ultimate-N 6300Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260Intel® Dual Band Wireless-AC 8265Intel® Wireless-AC 9260Intel® Wireless-AC 9560Intel® Tri-Band Wireless-AC 17265Intel® Tri-Band Wireless-AC 18260Intel® Tri-Band Wireless-AC 18265Intel® Wireless Gigabit Sink W13100Intel® Wireless Gigabit 11000Back to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsSpecificationsThis section provides specification information for the family of Intel® wireless adapters. The following list may notbe all inclusive.Intel® Centrino® Wireless-N 100Intel® Centrino® Wireless-N 105Intel® Centrino® Wireless-N 130Intel® Centrino® Wireless-N 135Intel® Centrino® Wireless-N 1000Intel® Centrino® Wireless-N 1030Intel® Centrino® Wireless-N 2200Intel® Centrino® Wireless-N 2230Intel® Centrino® Wireless-N + WiMAX 6150Intel® Centrino® Advanced-N 6200Intel® Centrino® Advanced-N 6205Intel® Centrino® Advanced-N 6230Intel® Centrino® Advanced-N 6235Intel® Centrino® Advanced-N + WiMAX 6250Intel® Centrino® Ultimate-N 6300Intel® Dual Band Wireless-AC 7260Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Intel® Dual Band Wireless-AC 3160Intel® Dual Band Wireless-AC 3165Intel® Dual Band Wireless-AC 3168Intel® Dual Band Wireless-AC 7265Intel® Dual Band Wireless-N 7265Intel® Wireless-N 7265Intel® Dual Band Wireless-AC 8260Intel® Dual Band Wireless-AC 8265Intel® Wireless-AC 9260Intel® Wireless-AC 9560Intel® Tri-Band Wireless-AC 17265Intel® Tri-Band Wireless-AC 18260Intel® Tri-Band Wireless-AC 18265Intel® Wireless Gigabit Sink W13100Intel® Wireless Gigabit 11000Intel® Centrino® Wireless-N 100, Intel® Centrino® Wireless-N 105,Intel® Centrino® Wireless-N 130 and Intel® Centrino® Wireless-N 135Form Factor PCI Express* Half-Mini CardDimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x4.5 mm)Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees Celsius
Humidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)WiFiFrequencyModulation 2.4 GHz (802.11b/g/n)Frequency band 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates MIMO Configuration: 1X1Tx/Rx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3,30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsBluetoothSupport Intel® Centrino® Wireless-N 100: NoneIntel® Centrino® Wireless-N 105: NoneIntel® Centrino® Wireless-N 130: Bluetooth 2.1, 2.1 + EDR, 3.0, 3.0+HSIntel® Centrino® Wireless-N 135: Bluetooth 4.0 (Bluetooth Low-Energy andBluetooth 3.0 +HS)GeneralOperatingSystems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bitand 64-bit)Wi-Fi Alliance*certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WPSCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11hArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS,EAP-AKAProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Centrino® Wireless-N 1000Form Factor PCI Express* Mini Card and Half-Mini CardSKUs Intel® Centrino® Wireless-N 1000 - 1X2 MC/HMCDimensions Mini Card: Width 2.0 in x Length 1.18 in x Height 0.18 in (50.80 mm x 30 mm x 4.5mm)Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30mm x 4.5 mm)Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityConnector Interface 52-pin Mini Card edge connector
Voltage 3.3 VOperating Temperature 0 to +80 degrees CelsiusHumidity 50% to 90% non-condensing (at temperatures of 25 ºC to 35 ºC)WiFiFrequency Modulation 2.4 GHz (802.11b/g/n)Frequency band 2.41-2.474 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM, CCK, DQPSK, DBPSKWireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11n DataRates 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2,65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsGeneralOperating Systems Microsoft Windows* XP (32 and 64 bit) and Windows Vista* (32 and 64 bit), UbuntuLinux*Wi-Fi Alliance*certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise,WPA2-Personal, WPA2-Enterprise, WMM, WPSCisco CompatibleExtensions certification Cisco Compatible Extensions, v4.0WLAN Standard IEEE 802.11g, 802.11b, 802.11n, 802.11d, 802.11e, 802.11i,Architecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, 802.1X: EAP-SIM,LEAP, PEAP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKAEncryption AES-CCMP 128-bit, WEP 128-bit and 64-bit, CKIP, TKIPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Centrino® Wireless-N 2200 and Intel® Centrino® Wireless-N2230Form Factor PCI Express* Half-Mini CardDimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x4.5 mm)Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)WiFiFrequencyModulation 2.4 GHz (802.11b/g/n)
Frequency band 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates MIMO Configuration: 2X2Tx/Rx: 300, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45,43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsBluetoothSupport Intel® Centrino® Wireless-N 2200: NoneIntel® Centrino® Wireless-N 2230: Bluetooth 4.0 (Bluetooth Low-Energy andBluetooth 3.0 +HS)GeneralOperatingSystems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bitand 64-bit)Wi-Fi Alliance*certification Wi-Fi* certification for 802.11b, 802.11g, 802.11n, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WPSCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0IEEE Feature Sets IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11hArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS,EAP-AKAProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Centrino® Wireless-N 1030 and Intel® Centrino® Advanced-N6230Form Factor PCI Express* Half-Mini CardDimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5mm)AntennaInterfaceConnectorHirose U.FL-R-SMT mates with cable connector U.FL-LP-066AntennaDiversity On-board diversityNetworkStandards 802.11a/b/g/n (varies by adapter) and Bluetooth 3.0 + HSConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)
WiFi NetworkStandardsIntel® Centrino® Wireless-N 1030: 802.11b/g/nIntel® Centrino® Advanced-N 6230: 802.11a/g/nFrequencyModulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n)Frequencyband 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWirelessMedium 5 GHz UNII: Orthogonal Frequency DivisionMultiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates Intel® Centrino® Advanced-N 6230:Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2Intel® Centrino® Wireless-N 1030:Rx (Mbps): 300, 270, 243, 240, 180Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3,30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11aData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsBluetooth Bluetooth Version 3.0 + HSGeneralOperatingSystems Microsoft Windows* XP (32-bit and 64-bit)Windows Vista* (32-bit and 64-bit)Windows* 7 (32-bit and 64-bit)Windows* 8 (32-bit and 64-bit)Windows* 8.1 (32-bit and 64-bit)Wi-FiAlliance*certificationWi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP,PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2PCiscoCompatibleExtensionscertificationCisco Compatible Extensions, v4.0WLANStandard IEEE 802.11g, 802.11b, 802.11a, 802.11nArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKAProductSafety UL, C-UL, CB (IEC/EN 60950-1)Intel® Centrino® Advanced-N 6235
Form Factor PCI Express* Half-Mini CardDimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5mm)AntennaInterfaceConnectorHirose U.FL-R-SMT mates with cable connector U.FL-LP-066AntennaDiversity On-board diversityNetworkStandards 802.11a/b/g/n and Bluetooth 4.0ConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n)Frequencyband 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWirelessMedium 5 GHz UNII: Orthogonal Frequency DivisionMultiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11aData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsBluetooth Bluetooth Version 4.0 (3.0 +HS )GeneralOperatingSystems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and64-bit)Wi-FiAlliance*certificationWi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPS, WMM, WMM Power Save, EAP-SIM, LEAP,PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKA, P2PCiscoCompatibleExtensionscertificationCisco Compatible Extensions, v4.0WLANStandard IEEE 802.11g, 802.11b, 802.11a, 802.11nArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKAProductSafetyUL, C-UL, CB (IEC/EN 60950-1)
Intel® Centrino® Advanced-N + WiMAX 6250 and Intel® Centrino®Wireless-N + WiMAX 6150Form Factor PCI Express* Half-Mini CardDimensions Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5mm)AntennaInterfaceConnectorHirose U.FL-R-SMT mates with cable connector U.FL-LP-066AntennaDiversity On-board diversityConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)WiFiFrequencyModulation Intel® Centrino® Advanced-N + WiMAX62502.4 GHz (802.11b/g/n), 5 GHz (802.11a/n)Intel® Centrino® Wireless-N + WiMAX 61502.4 GHz (802.11b/g/n)Frequencyband 5.15 GHz - 5.85 GHz (dependent oncountry) 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWirelessMedium 5 GHz UNII: Orthogonal Frequency DivisionMultiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates Intel® Centrino® Wireless-N + WiMAX 6150MIMO Configuration: 1X2Rx: 300, 270, 243, 240, 180 MbpsRx/Tx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30,28.9, 21.7, 15, 14.4, 7.2 MbpsIntel® Centrino® Advanced-N + WiMAX 6250MIMO Configuration: 2X2Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIEEE 802.11aData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsGeneralOperatingSystems Microsoft Windows* XP (32-bit and 64-bit)Windows Vista* (32-bit and 64-bit)Windows* 7 (32-bit and 64-bit)
Windows* 8 (32-bit and 64-bit)Windows* 8.1 (32-bit and 64-bit)Wi-Fi Alliance*certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP,TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKACiscoCompatibleExtensionscertificationCisco Compatible Extensions, v4.0IEEE FeatureSets Intel® Centrino® Wireless-N + WiMAX 6150: IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11dIntel® Centrino® Advanced-N + WiMAX 6250: 802.11a, IEEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11dArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKAProduct Safety UL, C-UL, CB (IEC/EN 60950-1)WiMAX GeneralOperatingSystems Microsoft Windows* XP (32-bit and 64-bit)Windows Vista* (32-bit and 64-bit)Windows* 7 (32-bit and 64-bit)Windows* 8 (32-bit and 64-bit)Windows* 8.1 (32-bit and 64-bit)StandardCompliance 802.16e-2005 Corrigenda 2 (D4)WiMAXSystem ProfileFeature setIntel® Centrino® Wireless-N + WiMAX 6150: Mobile WiMAX release 1, Wave II. Supports 3A and 1A/B profilesIntel® Centrino® Advanced-N + WiMAX 6250: Mobile WiMAX release 1, Wave II. Supports 3A, 5A/C, 1A/B, and 5BL profilesSecurity Key Management Protocol (PKMv2)Encryption 128-bit CCMP (Counter-Mode/CBC-MAC) based on AES encryptionWiMAXFrequencyband Intel® Centrino® Wireless-N + WiMAX 6150: 2.3-2.4 GHz / 2.496-2.690 GHzIntel® Centrino® Advanced-N + WiMAX 6250: 2.3-2.4 GHz / 2.496-2.690 GHz / 3.4-3.8 GHzModulation UL - QPSK, 16 QAMDL - QPSK, 16 QAM, 64 QAMWirelessMedium Duplex mode: TDD operations Scalable OFDMA (SOFDMA): 512 and 1024FFTsub-carrier permutation: PUSC Intel® Centrino® Wireless-N + WiMAX 6150:Channel bandwidths: 5 and 10 MHzIntel® Centrino® Advanced-N + WiMAX6250:Channel bandwidths: 5, 7, 8.75 and 10 MHzWiMAXNetworkReleaseFeature setSPWG/NWG Release 1.5
RatePerformanceIntel® Centrino® Wireless-N + WiMAX 6150:Up to 10 Mbps DL and 4 Mbps UL @ peak rate(OTA performance, 10MHz channel)Intel® Centrino® Advanced-N + WiMAX 6250:Up to 20 Mbps DL and 6 Mbps UL @ peak rate(OTA performance, 10MHz channel)RFTransmitterOutput PowerCompliance with Power class 2Intel® Centrino® Advanced-N 6200, Intel® Centrino® Advanced-N6205 and Intel® Centrino® Ultimate-N 6300Form Factor Intel® Centrino® Advanced-N 6200, Intel® Centrino® Ultimate-N 6300:PCI Express* Full-Mini Card and Half-Mini Card.Intel® Centrino® Advanced-N 6205: PCI Express* Half-Mini Card.Dimensions Full-Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in (50.95 mm x 30 mm x 4.5mm)Half-Mini Card: Width 1.049 in x Length 1.18 in x Height 0.18 in (26.64 mm x 30 mm x 4.5mm)AntennaInterfaceConnectorHirose U.FL-R-SMT mates with cable connector U.FL-LP-066AntennaDiversity On-board diversityConnectorInterface 52-pin Mini Card edge connectorVoltage 3.3 VOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n)Frequencyband 5.15 GHz - 5.85 GHz (dependent oncountry) 2.400 - 2.4835 GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWirelessMedium 5 GHz UNII: Orthogonal Frequency DivisionMultiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.IEEE 802.11nData Rates Intel® Centrino® Ultimate-N 6300:Tx/Rx: 450, 405, 360, 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIntel® Centrino® Advanced-N 6200, Intel® Centrino® Advanced-N 6205:Tx/Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 MbpsIEEE 802.11aData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Data RatesIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsGeneralOperatingSystems Microsoft Windows* XP (32-bit and 64-bit)Windows Vista* (32-bit and 64-bit)Windows* 7 (32-bit and 64-bit)Windows* 8 (32-bit and 64-bit)Windows* 8.1 (32-bit and 64-bit)Wi-Fi Alliance*certification Wi-Fi* certification for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WMM, WMM Power Save, EAP-SIM, LEAP, PEAP,TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKACiscoCompatibleExtensionscertificationCisco Compatible Extensions, v4.0WLANStandard IEEE 802.11g, 802.11b, 802.11a, 802.11nArchitecture Infrastructure or ad hoc (peer-to-peer) operating modesSecurity WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise, AES-CCMP 128-bit, WEP128-bit and 64-bit; 802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAP-TLS, EAP-TTLS, EAP-AKAProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 7260Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0 for both form factorsAntenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandardsIntel® Dual Band Wireless-AC 7260Model 7260HMW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, HMCModel 7260NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2OperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 7260: 2 X 2Data Rates All data rates are theoretical maximums.
IEEE 802.11ac DataRatesIntel® Dual Band Wireless-AC 7260: Up to 867 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 7260HMWModel 7260NGWGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-N 7260Intel® Wireless-N 7260Form Factors Half-Mini Card, M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe, USB 2.0 for both form factorsAntenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11 NetworkingStandards Intel® Dual Band Wireless-N 7260Model 7260HMW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, HMCModel 7260NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2Model 7260HMW NB - 802.11agn, 2x2, PCIe, USB, HMCModel 7260NGW NB - 802.11agn, 2x2, PCIe, USB, M.2Intel® Wireless-N 7260
Model 7260HMW BN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2Model 7260NGW BN - 802.11bgn, 2x2, Bluetooth 4.0, PCIe, USB, M.2Operating Temperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)Frequency Modulation(See above, not allbands supported by alladapters)5GHz (802.11a/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.802.11n spatial streams All adapters: 2 X 2 spatial streamsData Rates All data rates are theoretical maximums.IEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130,120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4,7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 7260HMW ANModel 7260NGW ANModel 7260HMW BNModel 7260NGW BNGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer deviceconnections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensions certification Cisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct* Encryption WPA2, AES-CCMP
and AuthenticationProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 3160Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0 for both form factorsAntenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandardsIntel® Dual Band Wireless-AC 3160Model 3160HMW - 802.11agn, ac, 1x1, Bluetooth 4.0, PCIe, USB, HMCModel 3160NGW - 802.11agn, ac, 1x1, Bluetooth 4.0, PCIe, USB, M.2OperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 3160: 1 X 1Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 3160: Up to 433 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8,45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 3160HMWModel 3160NGWGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco Compatible Cisco Compatible Extensions, v4.0
ExtensionscertificationSecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 3165 (Model 3165NGW)Form Factors M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandards802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11wOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 3165: 1 X 1Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 3165: Up to 433 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8,45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE)GeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)
Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 3168Form Factors M.2 2230 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandards802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11wOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 3168: 1 X 1Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 3168: Up to 433 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8,45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates11, 5.5, 2, 1 Mbps
Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.2 (BLE)GeneralOperating Systems Linux, Windows* 8.1 (64-bit), Windows* 10 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 7265 (Model 7265NGW)Form Factors M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandardsIntel® Dual Band Wireless-AC 7265Model 7265NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2OperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 7265: 2 X 2Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 7265: Up to 867 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 7265NGWGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-N 7265 (Models 7265NGW AN and 7265NGWNB)Intel® Wireless-N 7265 (Model 7265NGW BN)Form Factors M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe, USB 2.0Antenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11 NetworkingStandards Intel® Dual Band Wireless-N 7265Model 7265NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.2Model 7265NGW NB - 802.11agn, 2x2, PCIe, USB, M.2Intel® Wireless-N 7265Model 7265NGW BN - 802.11bgn, 2x2, Bluetooth 4.0, PCIe, USB, M.2Operating Temperature 0 to +80 degrees CelsiusHumidity 50% to 90% non-condensing (at temperatures of 25 ºC to 35 ºC)Frequency Modulation(See above, not allbands supported by all5GHz (802.11a/n) 2.4GHz (802.11b/g/n)
adapters)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.802.11n spatial streams All adapters: 2 X 2 spatial streamsData Rates All data rates are theoretical maximums.IEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130,120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4,7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 7265NGW ANModel 7265NGW NBModel 7265NGW BNGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer deviceconnections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensions certification Cisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct* Encryptionand Authentication WPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Dual Band Wireless-AC 8260Form Factors Half-Mini Card and M.2 (Next Generation Form Factor - NGFF)Electrical interfaces PCIe and USB 2.0 for both form factorsAntenna InterfaceConnector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversity
IEEE 802.11NetworkingStandardsIntel® Dual Band Wireless-AC 8260Model 8260NGW - 802.11agn, ac, 2x2, Bluetooth 4.0, PCIe, USB, M.2OperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 8260: 2 X 2Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 8260: Up to 867 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) supported by thefollowing adaptersModel 8260NGWGeneralOperating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-bit)Wi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)
Intel® Dual Band Wireless-AC 8265 (Models8265NGWH/8265NGW/8265D2W)GeneralDimensions (H x Wx D) M.2 2230: 22 mm x 30 mm x 2.4 mmM.2 1216: 12 mm x 16 mm x 1.8 mmWeight M.2 2230: 2.6gM.2 1216: 0.6gAntenna Diversity SupportedRadio ON/OFFControl SupportedConnector Interface M.2: PCIe, USB, or UART (M.2 1216 only)OperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1*, Microsoft Windows 10*, Linux* (limitedfeature support), AndroidWi-Fi Alliance*certification Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*, ProtectedManagement Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracast*as Source.IEEE WLANStandard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,802.11k, 802.11v pending OS support; Fine Timing Measurement based on802.11REVmcRoaming Supports seamless roaming between access pointsBluetooth Dual Mode Bluetooth* 4.2, BLESecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA,EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMPWi-Fi Direct*Encryption andAuthenticationWPA2-PSK, AES-CCMPComplianceProduct Safety UL, C-UL, CB (IEC 60950-1)Model NumbersModels Model 8265NGWH 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, LTECoexistence, eFEM, M.2 2230 HEModel 8265NGW 802.11ac, 2x2, Bluetooth* 4.2, PCIe, USB, M.22230 MSModel 8265D2W 802.11ac, 2x2, Bluetooth* 4.2, PCIe, LTECoexistence, M.2 1216 SDFrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent on country)
Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256QAMCCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Dual Band Wireless-AC 8265: 2 X 2Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Dual Band Wireless-AC 8265: Up to 867 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsIntel® Wireless-AC 9260 (Model 9260NGW)GeneralDimensions (H x W xD) M.2 2230: 22 mm x 30 mm x 2.4 mmWeight M.2 2230: 2.6gAntenna Diversity SupportedRadio ON/OFFControl SupportedConnector Interface M.2: PCIe, USBOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)Operating Systems Microsoft Windows 10*, Linux* (limited feature support), Chrome*Wi-Fi Alliance*certification Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*,WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct*.IEEE WLAN Standard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,802.11k, 802.11v pending OS support; Fine Timing Measurement based on802.11REVmcRoaming Supports seamless roaming between access pointsBluetooth Bluetooth* 5SecurityAuthentication WPA* and WPA2*, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA, EAP-AKA)AuthenticationProtocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2*Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMPWi-Fi Direct*Encryption andAuthenticationWPA2-PSK, AES-CCMPCompliance
US Government FIPS, FISMAProduct Safety UL, C-UL, CB (IEC 60950-1)Model NumbersModel 9260NGW 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe,USB, M.2 2230FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent oncountry)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal FrequencyDivision Multiplexing (OFDM) 2.4GHz ISM: Orthogonal FrequencyDivision Multiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Wireless-AC 9260: 2 X 2Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates 1.73 Gbps when using 160MHz channelsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsIntel® Wireless-AC 9560 (Models 9560NGW/9560D2W)GeneralDimensions (H xW x D) M.2 2230: 22 mm x 30 mm x 2.4 mmM.2 1216: 12 mm x 16 mm x 1.8 mmWeight M.2 2230: 2.6gM.2 1216: 0.6gAntenna Diversity SupportedRadio ON/OFFControl SupportedConnectorInterface M.2: CNVioOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)OperatingSystems Microsoft Windows 10*, Linux* (limited feature support), Chrome*Wi-Fi Alliance*certification Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*,WPS2*, Protected Management Frames, Wi-Fi Miracast* as Source, and Wi-Fi Direct* (ForMicrosoft Windows* only).IEEE WLANStandardIEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r, 802.11k,802.11v pending OS support; Fine Timing Measurement based on 802.11-2016
Roaming Supports seamless roaming between access pointsBluetooth Bluetooth* 5SecurityAuthentication WPA* and WPA2*, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA, EAP-AKA)AuthenticationProtocols PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2*Encryption 64-bit and 128-bit WEP, 128-bit AES-CCMPWi-Fi Direct*Encryption andAuthenticationWPA2-PSK, AES-CCMPComplianceUS Government FIPS, FISMAProduct Safety UL, C-UL, CB (IEC 60950-1)Model NumbersModels 9560NGW 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe,USB, M.2 22309560D2W 802.11ac wave 2, 2x2, Bluetooth* 5, PCIe,USB, M.2 1216FrequencyModulation 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 5.15GHz - 5.85GHz (dependent oncountry) 2.400 - 2.4835GHz (dependent on country)Modulation BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium 5GHz UNII: Orthogonal Frequency DivisionMultiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency DivisionMultiplexing (OFDM)Channels All channels as defined by the relevant specification and country rules.Spatial streams Intel® Wireless-AC 9560: 2 X 2Data Rates All data rates are theoretical maximums.IEEE 802.11acData Rates 1.73 Gbps when using 160MHz channelsIEEE 802.11nData Rates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11aData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11gData Rates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11bData Rates 11, 5.5, 2, 1 MbpsIntel® Tri-Band Wireless-AC 17265 (17265NGW/17265NGW LC)Form Factors M.2 Type 3030Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel® Wireless Gigabit-Antenna M10041Module using X-FL, and one dedicated for BluetoothAntenna InterfaceConnector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11 802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h,
NetworkingStandards802.11wOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 60GHz(802.11ad) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 57GHz - 64GHz(dependent oncountry)5.15GHz - 5.85GHz(dependent on country) 2.400 - 2.4835GHz (dependenton country)Modulation DPSK, BPSK,QPSK, 16 QAM, BPSK, QPSK, 16 QAM, 64QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium DMG control PHY,DMG SC PHY 5GHz UNII: OrthogonalFrequency DivisionMultiplexing (OFDM)2.4GHz ISM: OrthogonalFrequency Division Multiplexing(OFDM)Channels 1, 2 and 3,subject to countryrulesAll channels as defined by the relevant specification and countryrules.Spatial streams N/A Intel® Tri-Band Wireless-AC 17265Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Tri-Band Wireless-AC 17265: Up to 867 MbpsIEEE 802.11ad DataRates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE)GeneralOperating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standbyWi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-CGMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)
Intel® Tri-Band Wireless-AC 17265 (17265NGW/17265NGW LC)Form Factors M.2 Type 3030Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel® Wireless Gigabit-Antenna M10041Module using X-FL, and one dedicated for BluetoothAntenna InterfaceConnector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandards802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h,802.11wOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 60GHz(802.11ad) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 57GHz - 64GHz(dependent oncountry)5.15GHz - 5.85GHz(dependent on country) 2.400 - 2.4835GHz (dependenton country)Modulation DPSK, BPSK,QPSK, 16 QAM, BPSK, QPSK, 16 QAM, 64QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium DMG control PHY,DMG SC PHY 5GHz UNII: OrthogonalFrequency DivisionMultiplexing (OFDM)2.4GHz ISM: OrthogonalFrequency Division Multiplexing(OFDM)Channels 1, 2 and 3,subject to countryrulesAll channels as defined by the relevant specification and countryrules.Spatial streams N/A Intel® Tri-Band Wireless-AC 17265Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Tri-Band Wireless-AC 17265: Up to 867 MbpsIEEE 802.11ad DataRates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE)GeneralOperating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standbyWi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensions Cisco Compatible Extensions, v4.0
certificationSecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-CGMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Tri-Band Wireless-AC 18260 (18260NGW)Form Factors M.2 Type 2230Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel® Wireless Gigabit-Antenna M10041or M10042 Module using X-FL (single coax cable to carry power, IF and control)Dimensions 22 mm x 30 mm x S3 [1.5mm Max (Top Side)/ 0.1mm max (bottom side)]Antenna InterfaceConnector X.FL; Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066Antenna Diversity On-board diversityIEEE 802.11NetworkingStandardsIEEE 802.11abgn, 802.11ac, 802.11ad, 802.11d, 802.11e, 802.11i, 802.11h, 802.11wOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 60GHz(802.11ad) 5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 57GHz - 64GHz(dependent oncountry)5.15GHz - 5.85GHz(dependent on country) 2.400 - 2.4835GHz (dependenton country)Modulation DPSK, BPSK,QPSK, 16 QAM, BPSK, QPSK, 16 QAM, 64QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium DMG control PHY,DMG SC PHY 5GHz UNII: OrthogonalFrequency DivisionMultiplexing (OFDM)2.4GHz ISM: OrthogonalFrequency Division Multiplexing(OFDM)Channels 1, 2 and 3,subject to countryrulesAll channels as defined by the relevant specification and countryrules.Spatial streams N/A Intel® Tri-Band Wireless-AC 18260Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Intel® Tri-Band Wireless-AC 18260: Up to 867 MbpsIEEE 802.11ad DataRates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11g DataRates54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE), 4.1GeneralOperating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standbyWi-Fi Alliance*certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0,Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensionscertificationCisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-CGMP, TKIPWi-Fi Direct*Encryption andAuthenticationWPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Tri-Band Wireless-AC 18265 (18265NGW)GeneralDimensions (H x Wx D) M.2 2230: 22 mm x 30 mm x 2.4 mm [1.5mm Max (Top Side)/ 0.1mm Max (BottomSide)]Weight M.2 2230: 2.4gAntenna Diversity SupportedRadio ON/OFFControl SupportedConnector interface M.2: PCIe, USB Interface to Intel® Wireless Gigabit-Antenna M10101 Module using X-FL(single coax cable to carry power, IF and control)OperatingTemperature(Adapter Shield)0 to +80 ºCHumidity Non-Operating 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)Operating Systems Microsoft Windows 7*, Microsoft Windows 8.1*, Microsoft Windows 10, Linux* (limitedfeature support), AndroidWi-Fi Alliance Wi-Fi CERTIFIED* a/b/g/n/ac, WMM*, WMM-PS*, WPA*, WPA2*, WPS2, ProtectedManagement Frames, Wi-Fi Direct* for peer to peer device connections, Wi-Fi Miracastas SourceIEEE WLANStandard IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w; 802.11r,802.11k, 802.11v pending OS support; Fine Timing Measurement based on802.11REVmcRoaming Supports seamless roaming between respective access pointsBluetooth Dual Mode Bluetooth* 4.2, BLE
FrequencyModulation60GHz(802.11ad)5GHz (802.11ac/n) 2.4GHz (802.11b/g/n)Frequency band 57GHz - 64GHz(dependent oncountry)5.15GHz - 5.85GHz(dependent on country) 2.400 - 2.4835GHz (dependenton country)Modulation DPSK, BPSK,QPSK, 16 QAM, BPSK, QPSK, 16 QAM, 64QAM, 256 QAM CCK, DQPSK, DBPSKWireless Medium DMG control PHY,DMG SC PHY 5GHz UNII: OrthogonalFrequency DivisionMultiplexing (OFDM)2.4GHz ISM: OrthogonalFrequency Division Multiplexing(OFDM)Channels 1, 2 and 3,subject to countryrulesAll channels as defined by the relevant specification and countryrules.Spatial streams N/A Intel® Tri-Band Wireless-AC 18265Data Rates All data rates are theoretical maximums.IEEE 802.11ac DataRates Up to 867 MbpsIEEE 802.11ad DataRates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 MbpsIEEE 802.11n DataRates Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2IEEE 802.11a DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11g DataRates 54, 48, 36, 24, 18, 12, 9, 6 MbpsIEEE 802.11b DataRates 11, 5.5, 2, 1 MbpsSecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP), EAP-SIM, EAP-AKAAuthenticationProtocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMPWi-Fi Direct*Encryption andAuthenticationWPA2-PSK, AES-CCMPComplianceProduct Safety UL, C-UL, CB (IEC 60950-1)Intel® Wireless Gigabit Sink W13100Form Factors M.2 Type 3030Electrical interfaces M.2 Key 1-DP: 2xPCIe, USB, DP. Interface to Intel® Wireless Gigabit-AntennaM10041 Module using X-FL, and one dedicated for BluetoothAntenna InterfaceConnector X.FLAntenna Diversity On-board diversityIEEE 802.11 NetworkingStandards 802.11ac, 802.11ad, 802.11abgn, 802.11a, 802.11d, 802.11e, 802.11i, 802.11h,802.11wOperating Temperature 0 to +80 degrees Celsius
Humidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)Frequency Modulation 60GHz (802.11ad)Frequency band 57GHz - 64GHz (dependent on country)Modulation DPSK, BPSK, QPSK, 16 QAM,Wireless Medium DMG control PHY, DMG SC PHYChannels 1, 2 and 3, subject to country rulesSpatial streams Intel® Wireless Gigabit Sink W13100Data Rates All data rates are theoretical maximums.IEEE 802.11ad DataRates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 MbpsGeneralOperating Systems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standbyArchitecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modesCisco CompatibleExtensions certification Cisco Compatible Extensions, v4.0SecurityAuthentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKAAuthentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2Encryption 64-bit and 128-bit WEP, AES-CCMP, AES-CGMP, TKIPWi-Fi Direct* Encryptionand Authentication WPA2, AES-CCMPProduct Safety UL, C-UL, CB (IEC/EN 60950-1)Intel® Wireless Gigabit 11000Dimensions 20.5 mm x 14.2 mm x 1.8 mm (shield included)Weight 2 gramsElectricalinterfaces Soldered module has a proprietary land plan. Interface to Intel® Wireless GigabitAntenna-M 10042R using X-FL (single coax cable to carry power, IF and control)Antenna InterfaceConnector X.FLAntenna Diversity On-board diversityIEEE 802.11NetworkingStandards802.11adOperatingTemperature 0 to +80 degrees CelsiusHumidity 50% to 90% RH non-condensing (at temperatures of 25 ºC to 35 ºC)FrequencyModulation 60GHz (802.11ad)Frequency band 57GHz - 64GHz (dependent on country)Modulation DPSK, BPSK, QPSK, 16 QAM,Channels 1, 2 and 3, subject to country rulesData Rates All data rates are theoretical maximums.IEEE 802.11adData Rates 4620, 3850, 3080, 2503, 2310, 1925, 1540, 1251, 1155, 963, 770, 385 Mbps
GeneralOperatingSystems Microsoft Windows 7*, Microsoft Windows 8.1* with connected standby, MicrosoftWindows 10* with connected standbyBack to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsImportant InformationSafety InformationThird Party Software NoticesSafety InformationIt is important that you read the safety information regarding your WiFi adapter. Please see the User's Guide forsafety and regulatory notices.Third Party Software NoticesPortions of Intel® PROSet/Wireless WiFi Connection Utility include software under the following terms:OpenSSL LicenseCopyright (c) 1998-2006 The OpenSSL Project. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that thefollowing conditions are met:1.  Redistributions of source code must retain the above copyright notice, this list of conditions and the followingdisclaimer.2.  Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation and/or other materials provided with the distribution.3.  All advertising materials mentioning features or use of this software must display the followingacknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSLToolkit. (http://www.openssl.org/)"4.  The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote productsderived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.5.  Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their nameswithout prior written permission of the OpenSSL Project.6.  Redistributions of any form whatsoever must retain the following acknowledgment: "This product includessoftware developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includessoftware written by Tim Hudson (tjh@cryptsoft.com).Original SSLeay LicenseCopyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was writtenso as to conform with Netscape's SSL.This library is free for commercial and non-commercial use as long as the following conditions are adhered to. Thefollowing conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not justthe SSL code. The SSL documentation included with this distribution is covered by the same copyright terms exceptthat the holder is Tim Hudson (tjh@cryptsoft.com).Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this packageis used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can bein the form of a textual message at program startup or in documentation (online or textual) provided with thepackage.Redistribution and use in source and binary forms, with or without modification, are permitted provided that thefollowing conditions are met:1.  Redistributions of source code must retain the copyright notice, this list of conditions and the followingdisclaimer.2.  Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation and/or other materials provided with the distribution.3.  All advertising materials mentioning features or use of this software must display the followingacknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"The word 'cryptographic' can be left out if the routines from the library being used are not cryptographicrelated.4.  If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)you must include an acknowledgement: "This product includes software written by Tim Hudson(tjh@cryptsoft.com)"THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS:' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULARPURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICTLIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THISSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e.this code cannot simply be copied and put under another distribution license [including the GNU Public License.]zlib.h -- interface of the 'zlib' general purpose compression library, version 1.2.3, July18th, 2005Copyright (C) 1995-2005 Jean-loup Gailly and Mark AdlerThis software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liablefor any damages arising from the use of this software. Permission is granted to anyone to use this software for anypurpose, including commercial applications, and to alter it and redistribute it freely, subject to the followingrestrictions:1.  The origin of this software must not be misrepresented; you must not claim that you wrote the originalsoftware. If you use this software in a product, an acknowledgment in the product documentation would beappreciated but is not required.2.  Altered source versions must be plainly marked as such, and must not be misrepresented as being the originalsoftware.3.  This notice may not be removed or altered from any source distribution.Jean-loup Gailly jloup@gzip.orgMark Adler madler@alumni.caltech.edu
Adapter DriverPortions of the driver include software under the following terms:WPA SupplicantCopyright (c) 2003-2007, Jouni Malinen <jkmaline@cc.hut.fi> and contributors. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that thefollowing conditions are met:Redistributions of source code must retain the above copyright notice, this list of conditions and the followingdisclaimer.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and thefollowing disclaimer in the documentation and/or other materials provided with the distribution.Neither the name of Jouni Malinen nor the names of its contributors may be used to endorse or promoteproducts derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS ORIMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER ORCONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIALDAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OFUSE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANYWAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.__________Copyright (c) 2001, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.All rights reserved.LICENSE TERMSThe free distribution and use of this software in both source and binary form is allowed (with or without changes)provided that:1.  Distributions of this source code include the above copyright notice, this list of conditions and the followingdisclaimer;2.  distributions in binary form include the above copyright notice, this list of conditions and the followingdisclaimer in the documentation and/or other associated materials;3.  the copyright holder's name is not used to endorse products built using this software without specific writtenpermission.DISCLAIMERThis software is provided 'as is' with no explicit or implied warranties in respect of its properties, including, but notlimited to, correctness and fitness for purpose.Issue Date: 29/07/2002This file contains the definitions required to use AES (Rijndael) in C.Portions Licensed from Devicescape Software, Inc.Intel® PROSet/Wireless WiFi Connection Utility contains software licensed from Devicescape Software, Inc. Copyright(c) 2004 - 2008 Devicescape Software, Inc. All rights reserved."Odd Button" Artistic License
Portions of this software contain the standard version of "Odd Button" licensed under the Artistic License. The sourcecode for "Odd Button" may be found online at http://sourceforge.net/projects/oddbutton.Back to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsCustomer SupportIntel support is available online or by telephone. Available services include the most up-to-date product information,installation instructions about specific products, and troubleshooting tips.Online SupportTechnical Support: http://www.intel.com/supportNetwork Product Support: http://www.intel.com/networkCorporate Web Site: http://www.intel.comBack to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsWarranty InformationOne-Year Limited Hardware WarrantyLimited WarrantyIn this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications.Intel warrants to the purchaser of the Product that the Product, if properly used and installed, will be free fromdefects in material and workmanship and will substantially conform to Intel’s publicly available specifications for theProduct for a period of one (1) year beginning on the date the Product was purchased in its original sealedpackaging.SOFTWARE OF ANY KIND DELIVERED WITH OR AS PART OF THE PRODUCT IS EXPRESSLY PROVIDED "AS IS",SPECIFICALLY EXCLUDING ALL OTHER WARRANTIES, EXPRESS, IMPLIED (INCLUDING WITHOUT LIMITATION,WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE), providedhowever, that Intel warrants that the media on which the software is furnished will be free from defects for a periodof ninety (90) days from the date of delivery. If such a defect appears within the warranty period, you may returnthe defective media to Intel for replacement or alternative delivery of the software at Intel's discretion and withoutcharge. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text,graphics, links or other items contained within the software.If the Product which is the subject of this Limited Warranty fails during the warranty period for reasons covered bythis Limited Warranty, Intel, at its option, will:REPAIR the Product by means of hardware and/or software; ORREPLACE the Product with another product, OR, if Intel is unable to repair or replace the Product,REFUND the then-current Intel price for the Product at the time a claim for warranty service is made to Intelunder this Limited Warranty.THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER APPLICABLE STATE,NATIONAL, PROVINCIAL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGINAL PURCHASER OF THE PRODUCT.Extent of Limited WarrantyIntel does not warrant that the Product, whether purchased stand-alone or integrated with other products, includingwithout limitation, semi-conductor components, will be free from design defects or errors known as "errata." Currentcharacterized errata are available upon request. Further, this Limited Warranty does NOT cover: (i) any costsassociated with the replacement or repair of the Product, including labor, installation or other costs incurred by you,and in particular, any costs relating to the removal or replacement of any Product soldered or otherwise permanentlyaffixed to any printed circuit board or integrated with other products; (ii) damage to the Product due to externalcauses, including accident, problems with electrical power, abnormal, mechanical or environmental conditions, usagenot in accordance with product instructions, misuse, neglect, accident, abuse, alteration, repair, improper orunauthorized installation or improper testing, or (iii) any Product which has been modified or operated outside ofIntel’s publicly available specifications or where the original product identification markings (trademark or serialnumber) have been removed, altered or obliterated from the Product; or (iv) issues resulting from modification(other than by Intel) of software products provided or included in the Product, (v) incorporation of software products,other than those software products provided or included in the Product by Intel, or (vi) failure to apply Intel-suppliedmodifications or corrections to any software provided with or included in the Product.How to Obtain Warranty ServiceTo obtain warranty service for the Product, you may contact your original place of purchase in accordance with itsinstructions or you may contact Intel. To request warranty service from Intel, you must contact the Intel CustomerSupport ("ICS") center in your region (http://www.intel.com/support/wireless/) within the warranty period duringnormal business hours (local time), excluding holidays and return the Product to the designated ICS center. Pleasebe prepared to provide: (1) your name, mailing address, email address, telephone numbers and, in the USA, valid
credit card information; (2) proof of purchase; (3) model name and product identification number found on theProduct; and (4) an explanation of the problem. The Customer Service Representative may need additionalinformation from you depending on the nature of the problem. Upon ICS's verification that the Product is eligible forwarranty service, you will be issued a Return Material Authorization ("RMA") number and provided with instructionsfor returning the Product to the designated ICS center. When you return the Product to the ICS center, you mustinclude the RMA number on the outside of the package. Intel will not accept any returned Product without an RMAnumber, or that has an invalid RMA number, on the package. You must deliver the returned Product to thedesignated ICS center in the original or equivalent packaging, with shipping charges pre-paid (within the USA), andassume the risk of damage or loss during shipment. Intel may elect to repair or replace the Product with either a newor reconditioned Product or components, as Intel deems appropriate. The repaired or replaced product will beshipped to you at the expense of Intel within a reasonable period of time after receipt of the returned Product byICS. The returned Product shall become Intel’s property on receipt by ICS. The replacement product is warrantedunder this written warranty and is subject to the same limitations of liability and exclusions for ninety (90) days orthe remainder of the original warranty period, whichever is longer. If Intel replaces the Product, the LimitedWarranty period for the replacement Product is not extended.WARRANTY LIMITATIONS AND EXCLUSIONSTHIS WARRANTY REPLACES ALL OTHER WARRANTIES FOR THE PRODUCT AND INTEL DISCLAIMS ALL OTHERWARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, COURSE OF DEALING AND USAGEOF TRADE. Some states (or jurisdictions) do not allow the exclusion of implied warranties so thislimitation may not apply to you. ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THELIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Some states (or jurisdictions) donot allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.LIMITATIONS OF LIABILITYINTEL’S RESPONSIBILITY UNDER THIS OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO REPAIR,REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIESFOR ANY BREACH OF WARRANTY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, INTEL IS NOT RESPONSIBLE FORANY DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTYOR UNDER ANY OTHER LEGAL THEORY (INCLUDING WITHOUT LIMITATION, LOST PROFITS, DOWNTIME, LOSS OFGOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING,REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH A SYSTEM CONTAININGTHE PRODUCT), EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states (orjurisdictions) do not allow the exclusion or limitation of incidental or consequential damages, so theabove limitations or exclusions may not apply to you. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE OR JURISDICTION. ANY AND ALLDISPUTES ARISING UNDER OR RELATED TO THIS LIMITED WARRANTY SHALL BE ADJUDICATED IN THE FOLLOWINGFORUMS AND GOVERNED BY THE FOLLOWING LAWS: FOR THE UNITED STATES OF AMERICA, CANADA, NORTHAMERICA AND SOUTH AMERICA, THE FORUM SHALL BE SANTA CLARA, CALIFORNIA, USA AND THE APPLICABLE LAWSHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASIA PACIFIC REGION (EXCEPT FOR MAINLAND CHINA),THE FORUM SHALL BE SINGAPORE AND THE APPLICABLE LAW SHALL BE THAT OF SINGAPORE. FOR EUROPE ANDTHE REST OF THE WORLD, THE FORUM SHALL BE LONDON AND THE APPLICABLE LAW SHALL BE THAT OF ENGLANDAND WALES IN THE EVENT OF ANY CONFLICT BETWEEN THE ENGLISH LANGUAGE VERSION AND ANY OTHERTRANSLATED VERSION(S)OF THIS LIMITED WARRANTY (WITH THE EXCEPTION OF THE SIMPLIFIED CHINESEVERSION), THE ENGLISH LANGUAGE VERSION SHALL CONTROL.IMPORTANT! UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS SOLD HEREUNDER ARENOT DESIGNED, OR INTENDED FOR USE IN ANY MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS,TRANSPORTATION SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MISSION CRITICAL APPLICATION IN WHICHTHE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAYOCCUR.WEEE
Back to TopBack to ContentsTrademarks and Disclaimers
Back to ContentsGlossaryTerm Definition802.11 The 802.11 standard refers to a family of specifications developed by the IEEE for wirelessLAN technology. The 802.11 specifies an over-the-air interface between a wireless client anda base station or between two wireless clients and provides 1 or 2 Mbps transmission in the2.4 GHz band using either frequency hopping spread spectrum (FHSS) or direct sequencespread spectrum (DSSS).802.11a The 802.11a standard specifies a maximum data transfer rate of 54 Mbps and an operatingfrequency of 5 GHz. The 802.11a standard uses the Orthogonal Frequency DivisionMultiplexing (OFDM) transmission method. Additionally, the 802.11a standard supports802.11 features such as WEP encryption for security.802.11b 802.11b is an extension to 802.11 that applies to wireless networks and provides 11 Mbpstransmission (with a fallback to 5.5, 2 and 1 Mbps) in the 2.4 GHz band. 802.11b uses onlyDSSS. Throughput data rate 5+ Mbps in the 2.4 GHz band.802.11g The 802.11g standard specifies a maximum data transfer rate of 54 Mbps, an operatingfrequency of 2.4GHz, and WEP encryption for security. 802.11g networks are also referred toas Wi-Fi* networks.802.11n A task group of the IEEE 802.11 committee has defined a new draft specification thatprovides for increased throughput speeds of up to 540 Mbps. The specification provides forMultiple-Input-Multiple-Output (MIMO) technology, or using multiple receivers and multipletransmitters in both the client and access point, to achieve improved performance.802.1X 802.1X is the IEEE Standard for Port-Based Network Access Control. This is used inconjunction with EAP methods to provide access control to wired and wireless networks.AAA Server Authentication, Authorization and Accounting Server. A system to control access to computerresources and track user activity.Access Point(AP) A device that connects wireless devices to another network. For example, a wireless LAN,Internet modem or others.Ad Hoc Network A communication configuration in which every computer has the same capabilities, and anycomputer can initiate a communication session. Also known as a peer-to-peer network, adevice to device network or a computer-to-computer network.AES-CCMP Advanced Encryption Standard - Counter CBC-MAC Protocol is the new method for privacyprotection of wireless transmissions specified in the IEEE 802.11i standard. AES-CCMPprovides a stronger encryption method than TKIP. The AES algorithm is capable of usingcryptographic keys of 128, 192, and 256 bits to encrypt and decrypt data in 128-bit blocks.AES-CCMP uses the AES block cipher, but restricts the key length to 128 bits. AES-CCMPincorporates two sophisticated cryptographic techniques (counter mode and CBC-MAC) toprovide improved security between the mobile client and the access point.Authentication Verifies the identity of a user logging onto a network. Passwords, digital certificates, smartcards and biometrics are used to prove the identity of the client to the network. Passwordsand digital certificates are also used to identify the network to the client.Availablenetwork One of the networks listed under Available networks on the Wireless Networks tab of theWireless Network Connection Properties (Windows* XP environment). Any wireless networkthat is broadcasting and is within receiving range of the WiFi adapter appears on the list.BER Bit Error Rate. The ratio of errors to the total number of bits being sent in a datatransmission from one location to another.Bit Rate The total number of bits (ones and zeros) per second that a network connection can support.Note that this bit rate will vary, under software control, with different signal path conditions.Broadcast SSID Used to allow an access point to respond to clients on a wireless network by sending probes.BSSID A unique identifier for each wireless client on a wireless network. The Basic Service SetIdentifier (BSSID) is the Ethernet MAC address of each adapter on the network.
CA (CertificateAuthority) A corporate certification authority implemented on a server. In addition, Internet Explorer'scertificate can import a certificate from a file. A trusted CA certificate is stored in the rootstore.CCX (CiscoCompatibleeXtension)Cisco Compatible Extensions Program ensures that devices used on Cisco wireless LANinfrastructure meet the security, management and roaming requirements.Certificate Used for client authentication. A certificate is registered on the authentication server (forexample, RADIUS server) and used by the authenticator.CKIP Cisco Key Integrity Protocol (CKIP) is a Cisco proprietary security protocol for encryption in802.11 media. CKIP uses a key message integrity check and message sequence number toimprove 802.11 security in infrastructure mode. CKIP is Cisco's version of TKIP.Client computer The computer that gets its Internet connection by sharing either the host computer'sconnection or the access point's connection.DSSS Direct Sequence Spread Spectrum. Technology used in radio transmission. Incompatible withFHSS.EAP Short for Extensible Authentication Protocol, EAP sits inside of Point-to-Point Protocol's (PPP)authentication protocol and provides a generalized framework for several differentauthentication methods. EAP is supposed to head off proprietary authentication systems andlet everything from passwords to challenge-response tokens and public-key infrastructurecertificates all work smoothly.EAP-AKA EAP-AKA (Extensible Authentication Protocol Method for UMTS Authentication and KeyAgreement) is an EAP mechanism for authentication and session key distribution, using theUniversal Mobile Telecommunications System (UMTS) Subscriber Identity Module (USIM).The USIM card is a special smart card used with cellular networks to validate a given userwith the network.EAP-FAST EAP-FAST, like EAP-TTLS and PEAP, uses tunneling to protect traffic. The main difference isthat EAP-FAST does not use certificates to authenticate.Provisioning in EAP-FAST is negotiated solely by the client as the first communicationexchange when EAP-FAST is requested from the server. If the client does not have a pre-shared secret Protected Access Credential (PAC), it can request to initiate a provisioningEAP-FAST exchange to dynamically obtain one from the server.EAP-FAST documents two methods to deliver the PAC: manual delivery through an out-of-band secure mechanism, and automatic provisioning.Manual delivery mechanisms can be any delivery mechanism that the administrator ofthe network feels is sufficiently secure for their network.Automatic provisioning establishes an encrypted tunnel to protect the authentication ofthe client and the delivery of the PAC to the client. This mechanism, while not assecure as a manual method may be, is more secure than the authentication methodused in LEAP.The EAP-FAST method can be divided into two parts: provisioning, and authentication. Theprovisioning phase involves the initial delivery of the PAC to the client. This phase only needsto be performed once per client and user.EAP-GTC The EAP-GTC (Generic Token Card) is similar to the EAP-OTP except with hardware tokencards. The request contains a displayable message, and the response contains the stringread from the hardware token card.EAP-OTP EAP-OTP (One-Time Password) is similar to MD5, except it uses the OTP as the response.The request contains a displayable message. The OTP method is defined in RFC 2289.EAP-SIM Extensible Authentication Protocol-Subscriber Identity Module (EAP-SIM) authentication canbe used with:Network Authentication types: Open, Shared, and WPA*-Enterprise, WPA2*-Enterprise.
Data Encryption types: None, WEP and CKIP.A SIM card is a special smart card that is used by Global System for Mobile Communications(GSM) based digital cellular networks. The SIM card is used to validate your credentials withthe networkEAP-TLS A type of authentication method that uses EAP and a security protocol called the TransportLayer Security (TLS). EAP-TLS uses certificates that use passwords. EAP-TLS authenticationsupports dynamic WEP key management.EAP-TTLS A type of authentication method that uses EAP and Tunneled Transport Layer Security(TTLS). EAP-TTLS uses a combination of certificates and another security method such aspasswords.Encryption Scrambling data so that only the authorized recipient can read it. Usually a key is needed tointerpret the data.FHSS Frequency-Hop Spread Spectrum. Technology used in radio transmission. Incompatible withDSSS.File and printersharing A capability that allows a number of people to view, modify, and print the same file(s) fromdifferent computers.Fragmentationthreshold The threshold at which the wireless adapter breaks the packet into multiple frames. Thisdetermines the packet size and affects the throughput of the transmission.GHz(Gigahertz) A unit of frequency equal to 1,000,000,000 cycles per second.Host computer The computer that is directly connected to the Internet via a modem or network adapter.Infrastructurenetwork A wireless network centered around an access point. In this environment, the access pointnot only provides communication with the wired network, but also mediates wireless networktraffic in the immediate neighborhood.IEEE Institute of Electrical and Electronics Engineers (IEEE) is an organization involved in definingcomputing and communications standards.InternetProtocol (IP)addressThe address of a computer that is attached to a network. Part of the address designateswhich network the computer is on, and the other part represents the host identification.LAN (Local AreaNetwork) A high-speed, low-error data network covering a relatively small geographic area.LEAP (LightExtensibleAuthenticationProtocol)A version of Extensible Authentication Protocol (EAP). LEAP is a proprietary extensibleauthentication protocol developed by Cisco that provides a challenge-responseauthentication mechanism and dynamic key assignment.MAC (MediaAccess Control)AddressA hardwired address applied at the factory. It uniquely identifies network hardware, such asa wireless adapter, on a LAN or WAN.Mbps(Megabits-per-second)Transmission speed of 1,000,000 bits per second.MHz(Megahertz) A unit of frequency equal to 1,000,000 cycles per second.MIC (Michael) Message Integrity Check (commonly called Michael).MS-CHAP An EAP mechanism used by the client. Microsoft Challenge Authentication Protocol (MS-CHAP) Version 2, is used over an encrypted channel to enable server validation. Thechallenge and response packets are sent over a non-exposed TLS encrypted channel.ns(Nanosecond) 1 billionth (1/1,000,000,000) of a second.OFDM Orthogonal Frequency Division Multiplexing.Openauthentication Allows any device network access. If encryption is not enabled on the network, any devicethat knows the Service Set Identifier (SSID) of the access point can gain access to thenetwork.
PEAP Protected Extensible Authentication Protocol (PEAP) is an Internet Engineering Task Force(IETF) draft protocol sponsored by Microsoft, Cisco, and RSA Security. PEAP creates anencrypted tunnel similar to the tunnel used in secure web pages (SSL). Inside the encryptedtunnel, a number of other EAP authentication methods can be used to perform clientauthentication. PEAP requires a TLS certificate on the RADIUS server, but unlike EAP-TLSthere is no requirement to have a certificate on the client. PEAP has not been ratified by theIETF. The IETF is currently comparing PEAP and TTLS (Tunneled TLS) to determine anauthentication standard for 802.1X authentication in 802.11 wireless systems. PEAP is anauthentication type designed to take advantage of server-side EAP-Transport Layer Security(EAP-TLS) and to support various authentication methods, including user passwords andone-time passwords, and Generic Token Cards.Peer-to-Peermode A wireless network structure that allows wireless clients to communicate directly with eachother without using an access point.Power savemode The state in which the radio is periodically powered down to conserve power. When theportable computer is in Power Save mode, received packets are stored in the access pointuntil the wireless adapter wakes up.Preferrednetwork One of the networks that has been configured. Such networks are listed under Preferrednetworks on the Wireless Networks tab of the Wireless Network Connection Properties(Windows* XP environment).RADIUS(RemoteAuthenticationDial-In UserService)RADIUS is an authentication and accounting system that verifies user's credentials andgrants access to requested resources.RF (RadioFrequency) The international unit for measuring frequency is Hertz (Hz), which is equivalent to the olderunit of cycles per second. One MegaHertz (MHz) is one million Hertz. One GigaHertz (GHz) isone billion Hertz. For reference: the standard US electrical power frequency is 60 Hz, the AMbroadcast radio frequency band is 0.55 -1.6 MHz, the FM broadcast radio frequency band is88-108 MHz, and microwave ovens typically operate at 2.45 GHz.Roaming Movement of a wireless node between two micro cells. Roaming usually occurs ininfrastructure networks built around multiple access points. Current wireless networkroaming is only supported in the same subnet of a network.RTS threshold The number of frames in the data packet at or above which an RTS/CTS (request tosend/clear to send) handshake is turned on before the packet is sent. The default value is2347.Shared key An encryption key known only to the receiver and sender of data. This is also referred to asa pre-shared key.SIM (SubscriberIdentityModule)A SIM card is used to validate credentials with the network. A SIM card is a special smartcard used by GSM-based digital cellular networks.Silent mode Silent Mode Access Points or Wireless Routers have been configured to not broadcast theSSID for the wireless network. This makes it necessary to know the SSID in order toconfigure the wireless profile to connect to the access point or wireless router.Single Sign On Single Sign On feature set allows the 802.1X credentials to match your Windows log on username and password credentials for wireless network connections.SSID (ServiceSet Identifier) SSID or network name is a value that controls access to a wireless network. The SSID foryour wireless network card must match the SSID for any access point that you want toconnect with. If the value does not match, you are not granted access to the network. EachSSID may be up to 32 alphanumeric characters long and is case-sensitive.stealth A stealth access point is one that has the capability and is configured to not broadcast itsSSID. This is the WiFi network name that appears when a DMU (Device Management Utility,such as Intel® PROSet/Wireless WiFi Connection Utility) scans for available wirelessnetworks. Although this can enhance wireless network security, it is commonly considered aweak security feature. To connect to a stealth access point, a user must specifically know theSSID and configure their DMU accordingly. The feature is not a part of the 802.11
specification, and is known by differing names by various vendors: closed mode, privatenetwork, SSID broadcasting.TKIP (TemporalKey IntegrityProtocol)Temporal Key Integrity protocol improves data encryption. Wi-Fi Protected Access* uses itsTKIP. TKIP provides important data encryption enhancements including a re-keying method.TKIP is part of the IEEE 802.11i encryption standard for wireless networks. TKIP is the nextgeneration of WEP, the Wired Equivalency Protocol, which is used to secure 802.11 wirelessnetworks. TKIP provides per packet key mixing, a message integrity check and a re-keyingmechanism, thus fixing the flaws of WEP.TLS (TransportLayer Security) A type of authentication method using the Extensible Authentication Protocol (EAP) and asecurity protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates whichuse passwords. EAP-TLS authentication supports dynamic WEP key management. The TLSprotocol is intended to secure and authenticate communications across a public networkthrough data encryption. The TLS Handshake Protocol allows the server and client to providemutual authentication and to negotiate an encryption algorithm and cryptographic keysbefore data is transmitted.TTLS (TunneledTransport LayerSecurity)These settings define the protocol and the credentials used to authenticate a user. In TTLS,the client uses EAP-TLS to validate the server and create a TLS-encrypted channel betweenthe client and server. The client can use another authentication protocol. Typically password-based protocols challenge over this encrypted channel to enable server validation. Thechallenge and response packets are sent over a non-exposed TLS encrypted channel. TTLSimplementations today support all methods defined by EAP, as well as several older methods(CHAP, PAP, MS-CHAP and MS-CHAP-V2). TTLS can easily be extended to work with newprotocols by defining new attributes to support new protocols.WEP (WiredEquivalentPrivacy)Wired Equivalent Privacy, 64- and 128-bit (64-bit is sometimes referred to as 40-bit). This isa low-level encryption technique designed to give the user about the same amount ofprivacy that he would expect from a LAN. WEP is a security protocol for wireless local areanetworks (WLANs) defined in the 802.11b standard. WEP is designed to provide the samelevel of security as that of a wired LAN. WEP aims to provide security by data over radiowaves so that it is protected as it is transmitted from one end point to another.WEP Key Either a pass phrase or hexadecimal key.The pass phrase must be 5 ASCII characters for 64-bit WEP or 13 ASCII characters for 128-bit WEP. For pass phrases, 0-9, a-z, A-Z, and ~!@#$%^&*()_+|`-={}|[]\:";'<>?,./ are allvalid characters.The hex key must be 10 hexadecimal characters (0-9, A-F) for 64-bit WEP or 26hexadecimal characters (0-9, A-F) for 128-bit WEP.Wi-Fi*(WirelessFidelity)Is meant to be used generically when referring of any type to 802.11 network, whether802.11b, 802.11a, or dual-band.WiMAX WiMAX, the Worldwide Interoperability for Microwave Access, is a telecommunicationstechnology aimed at providing wireless data over long distances in a variety of ways, frompoint-to-point links to full mobile cellular type access. It is based on the IEEE 802.16standard. The name WiMAX was created by the WiMAX Forum, which was formed in June2001 to promote conformance and interoperability of the standard. The forum describesWiMAX as "a standards-based technology enabling the delivery of last mile wirelessbroadband access as an alternative to cable and DSL."Wireless router A stand-alone wireless hub that allows any computer that has a wireless network adapter tocommunicate with another computer within the same network and to connect to theInternet.WLAN (WirelessLocal-AreaNetwork)A type of local-area network that uses high-frequency radio waves rather than wires tocommunicate between nodes.WPA* (Wi-FiProtectedAccess)This is a security enhancement that strongly increases the level of data protection andaccess control to a wireless network. WPA is an interim standard that will be replaced withthe IEEE's 802.11i standard upon its completion. WPA consists of RC4 and TKIP and providessupport for BSS (Infrastructure) mode only. WPA and WPA2 are compatible.WPA2* (Wi-Fi This is the second generation of WPA that complies with the IEEE TGi specification. WPA2
ProtectedAccess 2)consists of AES encryption, pre-authentication and PMKID caching. It provides support forBSS (Infrastructure) mode and IBSS (ad hoc) mode. WPA and WPA2 are compatible.WPA-Enterprise Wi-Fi Protected Access-Enterprise applies to corporate users. A new standards-based,interoperable security technology for wireless LAN (subset of IEEE 802.11i draft standard)that encrypts data sent over radio waves. WPA is a Wi-Fi standard that was designed toimprove upon the security features of WEP as follows:Improved data encryption through the temporal key integrity protocol (TKIP). TKIPuses a hashing algorithm to scramble the encryption keys and adds an integrity-checking feature to ensure that the keys have not been tampered with.User authentication, which is generally missing in WEP, through the extensibleauthentication protocol (EAP). WEP regulates access to a wireless network based on acomputer's hardware-specific MAC address, which is relatively simple to be sniffed outand stolen. EAP is built on a more secure public-key encryption system to ensure thatonly authorized network users can access the network.WPA is an interim standard that will be replaced with the IEEE's 802.11i standard upon itscompletion.WPA-Personal Wi-Fi Protected Access-Personal provides a level of security in the small network or homeenvironment.WPA-PSK (Wi-FiProtected-Access Pre-Shared Key)WPA-PSK mode does not use an authentication server. It can be used with the dataencryption types WEP or TKIP. WPA-PSK requires configuration of a pre-shared key (PSK).You must enter a pass phrase or 64 hex characters for a pre-shared key of length 256-bits.The data encryption key is derived from the PSK.Back to TopBack to ContentsTrademarks and Disclaimers

Navigation menu