User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3085012 |
| Application ID | 9GEqudf6zgvWOHWshzAczg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 49.8kB (622525 bits) |
| Date Submitted | 2016-08-03 00:00:00 |
| Date Available | 2017-02-02 00:00:00 |
| Creation Date | 2016-08-02 16:22:13 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2016-08-02 16:22:13 |
| Document Title | Microsoft Word - Cloud Rest User Manual_V0.3_20160726_A-2 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | joyce |
Cloud Rest User Manual Rev 0.3 Revision history Data Doc.Rev. Changes 19‐JULY‐2016 Rev.0.1 Initial Release 25‐JULY‐2016 Rev.0.2 Add FCC statements 26‐JULY‐2016 Rev.0.3 • • • Correct project name to Cloud Rest Modify some spelling mistake Add WLAN operation description 1.Introduction 1.1 Purpose This document illustrate detail information how to use Cloud Rest and assemble peripherals. 1.2 Document Reference Table Document 1.3 Cloud Rest Introduction Document Number 1.4 Main Features The table shows the specification and interface that are supported on the Cloud Rest module 2 Cloud Rest Function Validation 2.1Board connection and Operate The below pictures depict the front and back side of the Cloud Rest device and the peripherals connected 2.1.1 Power on Power on with 12V/2A DC adaptor with 10pin power cable. System will boot up automatic after plug in power cable on VAT_IN connector 2.1.2 EMMC Command NA 2.1.3 SSD Command NA 2.1.4 Micro SD Command NA 2.1.5 Motion Camera Command NA 2.1.6 Rear Camera Command NA 2.1.7 Front Camera Command NA 2.1.8 DS4 Camera Command 1) login: root password: Cr1BsP2aDmIn3 2)command export DISPLAY=:0 DSSimpleCaptureGL 2.1.9 WLAN Operation Intel®Dual‐Band Wireless‐AC 8260 (code name Snowfield Peak or SfP) is M.2 connectivity module for Notebooks, Tablets and PCs. It supports 802.11abgn+ac MIMO 2x2 radio technology When you have both update DRTU and drtu_core18_aero.tar.bz2, please go with: [In board DUT] 1) copy drtu_core18_aero.tar.bz2 to your board. 2) de‐compress it like " tar vzxf drtu_core18.tar.gz". 3) cd drtu_core18 4) ./install.sh 5) reboot [Windows] 1) Install the DRTU setup.exe. (Just keep clicking next step till done installation) Every time you want to run DRTU: [Note] You need to attach a USB ethernet in the board. And you need to make sure both board and Windows can ping each other IP address. [Board DUT] Run rservice step: 1) cd /drtu_core18/ 2) ./enter_mfg_mode.sh [Windows] Run DRTU : 1) Use your Windows DTRU connect to board IP. 2.1.10 WWAN Command NA 2.1.11 Barometer Command NA 2.1.12 A+G Command NA 2.1.13 Magnetic Command NA 2.1.14 CAN 2.0 Command NA 2.1.15 PCIE Command NA 4. Statements FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. The antenna(s) used for this transmitter must not be co-located of operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. Ln order to avoid the possibility of exceeding the Fcc radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8inches) during normal operation. IC Statements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-0003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites d'exposition aux rayonnements de la IC pour un environnement non contrôlé. L'antenne doit être installé de façon à garder une distance minimale de 20 centimètres entre la source de rayonnements et votre corps. L'émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur. The device for the UNII band-1 is only for indoor use.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2016:08:02 16:22:13+08:00 Create Date : 2016:08:02 16:22:13+08:00 Format : application/pdf Title : Microsoft Word - Cloud Rest User Manual_V0.3_20160726_A-2 Creator : joyce Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:03d0eb93-b065-4a9d-ab72-b3d42a81fdca Instance ID : uuid:0ef8f76e-d377-4b95-9a13-e0a58d76020b Page Count : 10 Author : joyceEXIF Metadata provided by EXIF.tools