Intel ND15 XBEE 900 HP User Manual Module installation instruction V3

Intel Corporation XBEE 900 HP Module installation instruction V3

Module installation instruction V3

Intel Corporation 2200 Mission College Blvd Santa Clara, CA 95054 Installation Addendum – FCC ID: 2AB8ZND15 This module is approved for use with the antennas described in the Digi manual, XBee-PRO 900HP/XBee-PRO XSC RF Modules User Guide, page 181, when installed so that the end device and antennas are a minimum of 20cm from persons. RF exposure information needs to be included in the end product’s user manual to ensure installation in accordance with these conditions. Use in such portable conditions is limited to devices manufactured by Intel or by ODMs. The device shall be installed onto a ski, snowboard or similar device such that the device is located at least 39mm from wrists, ankles, feet and hands. Installation instructions and user information must clearly reflect this and the instructions must indicate that this separation distance is required to ensure compliance with RF exposure requirements. The host equipment into which the module is installed must be labelled with the following visible to the user: Contains FCC ID: 2AB8ZND15

Navigation menu