Intel ND5 Health Tracking Band User Manual

Intel Corporation Health Tracking Band

User manual

Intel Confidential — Do Not ForwardLois/Clark Device BehaviorApril 28, 2015New Business Group UXDocument Owner: Anna Mansour anna.mansour@intel.com
Intel Confidential — Do Not Forward |ContentsCURRENT JEWELRY (DEVICE) BEHAVIORSPECIAL SITUATIONS FOR THE R/GA APPPLANNED JEWELRY (DEVICE) BEHAVIOR231022
Intel Confidential — Do Not Forward |Current Jewelry Behavior3
Intel Confidential — Do Not Forward |Summary of Device Behaviors (Completed)4Exact LED Colors TBD pending testing. Inactive = no movement/no alerts received from paired phone.
Intel Confidential — Do Not Forward |Summary of Device Behaviors (Planned)5Exact LED Colors TBD pending testing. Inactive = no movement/no alerts received from paired phone.[By Beta. App must guide user to do FW update]
Intel Confidential — Do Not Forward |Bluetooth Advertising6Events that will make the Device advertise itself (30 seconds):If the Device has not been paired with a phone! The device is turned on! The bluetooth pairing information is removed (via an 8-second button press)! [Planned] The button is pressed once when the device is already turned onIf the Device has been paired with a phone! The device is turned on! A button press! A recognized double or triple tap! The BLE connection is interrupted! The bluetooth pairing information is removed (via an 8-second button press)! Periodically (~every 1s) to maintain a constant connection! [Planned] When movement (accelerometer) occurs after device hasn’t moved in a given time TBDMore details in Clark/Lois BLE Behaviors document.
Intel Confidential — Do Not Forward |Button Overview7Vibra Device turns offVibraVibra Vibra VibraVibraTurn on / BLE AdvertiseDevice wipes pairing infoDevice goes to recover mode0 Sec 3 Sec 8 Sec 12 SecButtonButtonButtonButtonHW ResetUser releases button in response to vibraUser releases button in response to vibraUser releases button in response to vibraPower OnPower OffWipe Pairing InfoRecovery Mode(used rarely)Note: If device is already powered on, pressing the button will trigger BLE to advertiseNote: Currently, on release of the device button the haptic response is played. This will be fixed so that the haptics play after the button is held for the specified time.Hold button for 12s for recovery mode/hw reset until light feedback (exact pattern TBD)
Intel Confidential — Do Not Forward |Debug Notifications!– Extra Lights You’re Experiencing8These occur along with the normal behaviors. They are temporary debugging codes and will be removed before the Beta Field Trial.Please see Device Release Notes for the most up to date debug notifications.
Intel Confidential — Do Not Forward |Tap Input9Pattern Error: Feedback if a tap not successfully sent to phone. Buzz: 250ms LED: Red 5 Flicker (100ms On, 100ms Off)Pattern Gestures: Blink feedback for two and 3 taps.
Intel Confidential — Do Not Forward |Special Situations for the R/GA App to handle10
Intel Confidential — Do Not Forward |[Planned] Recovery Mode11Recovery Mode is needed for 3 situations1.  Device is non-functioning and no other fixes work (User-Initiated)2.  If BLE link is cut during FOTA (Automatic)3.  If too many critical problems have been detected (Automatic)There should be:• In-App detection of Recovery Mode and guidance for getting the user out of it (a firmware update).• FAQ/Support for putting the device into Recovery Mode when nothing else works, and getting the device out of Recovery Mode.• FAQ/Support for what to do when the device goes into Recovery Mode by itself.
Intel Confidential — Do Not Forward |Unpairing a Device –!Potential IssuesUnpairing should be done on both the jewelry and the phone to prevent future pairing issues. The user needs to be instructed to unpair from both the phone and the jewelry.Two potential sticky situations:12Scenario 1: Kate is lending her watch to JulieJulie can’t pair until she wipes watch BT settings.Scenario 2: Olivia got a new phoneOlivia can’t pair until she wipes the watch BT settings.Jewelry is still paired, Phone has no pairing info/is new?Scenario 3: Kate gets her watch back from JulieKate’s phone will have old pairing info, even though it recognizes the watch. She won’t be able to pair until she removes the device from her BT menu.Jewelry is wiped, Phone is still paired?
Intel Confidential — Do Not Forward | 13Pairing, Wiping, Reconnecting
Intel Confidential — Do Not Forward |Pairing New Jewelry –!Never Been Paired14Begin Pairing Flow In AppUser follows App instructions to trigger Bluetooth advertisingConfirmation of Pairing on JewelryPaired & Connected1 Blink (500 ms)1 Buzz (250 ms)PAIRBrand new devices arrive in a shipping mode. They must be put on the charger to get out of shipping mode and be able to pair. It will power on automatically and advertise.Put Device on Charger and plug inWe recommend requiring the user to press the button (an intentional act).Note: A firmware update might be necessary right after pairing.
Intel Confidential — Do Not Forward |Pairing New Jewelry –!Never Been Paired15A Potential Flow Open BoxPlug in Jewelry/ChargerDownload AppIf Jewelry still advertising, skipDevice out of shipping modeand advertises Start Pairing Flow in App“Press Button on Jewelry”Jewelry Found & PairedContinue App Setup FlowUser views instruction cardA Firmware Update may be required
Intel Confidential — Do Not Forward |Pairing New Jewelry –!Previously Paired (ex. sharing/selling)16Remove previous pairingThis will cause the device to broadcast for 30 secondsBegin Pairing Flow In AppFollow App instructions to trigger Bluetooth advertisingConfirmation of Pairing on JewelryPaired & Connected1 Blink (500 ms)1 Buzz (250 ms)*Press*We recommend requiring the user to press the button (an intentional act). PAIR
Intel Confidential — Do Not Forward |Pairing New Jewelry –!Previously Paired17A Potential Flow Receive JewelryAttempt to Pair in AppApp shows help (or FAQ link)If Jewelry still advertising, skipDevice still paired, not found Wipe pairing on DeviceAttempt to Pair in AppJewelry Found & PairedContinue App Setup FlowA Firmware Update may be required“Press Button on Jewelry”
Intel Confidential — Do Not Forward |Wipe the Pairing for the Jewelry18Remove Previous PairingPress Jewelry button for 8s to reset it (Jewelry must be on)At 8 seconds, a notification confirmation is played followed by the Power On pattern*Very Long Press** Press button for 8 seconds until haptic feedback, then release1 Buzz (1.5 seconds)Remove the Jewelry from the phone’s Bluetooth menu. This prevents issues if the user tries to pair the same Jewelry again.Forget this device
Intel Confidential — Do Not Forward |Connecting Jewelry (previously paired) from the Device19Jewelry Connects to PhoneJewelry Finds Phone it is Paired to (if available)Trigger Bluetooth AdvertisingA. One DeviceFound ConnectedEach time the connection does not exist and there is a paired phone, the device will advertise when:• Powered on• A tap is detected• 30 minutes have elapsed without connection since the last advertising event. • [Planned] The button is pressed• [Planned] Device is moved after not moving for a period of time
Intel Confidential — Do Not Forward |Connecting Jewelry (previously paired) from the Device20The first jewelry that has a Bluetooth Advertising condition triggered connects to the phoneB. Multiple Devices – no devices are already connectedConnectedPOR
Intel Confidential — Do Not Forward |Connecting Jewelry (previously paired) from the Device21Option 2: Once the user walks far enough, Jewelry A will disconnect and Jewelry B will eventually connectOption 1: Connect from the appJewelry A is connected and the user wants Jewelry B to connectC. Multiple Devices – one is already connectedConnectedJewelry AJewelry B Jewelry BConnectedCONNECTPOR
Intel Confidential — Do Not Forward |Planned Jewelry Behavior22
Intel Confidential — Do Not Forward |Planned BehaviorsFirst Time Use – Shipping Mode• When receiving a brand new device, it needs to be put on the Qi charger first to get out of shipping mode. It will turn on and advertise (BT) for 30s.Charging Behavior• See page 26-27.• Charger LED displays 2 states: “charging” and “full” (if no alignment of coils, light turns off).Notification Interrupt• Differentiate “local” from “incoming” notification.• Allow some notifications to interrupt others.Device needs to queue notifications and play them out serially.• Incoming Notifications (SMS, email, call etc.) should have the ability to queue and play one after the other.Device Connect/Disconnect Alert• Add as a configuration, off by default.Recovery Mode & Alert• Press button for 12 seconds to trigger Recovery Mode.• Feedback that the device is in Recovery Mode (an LED pattern).• The app will need to walk the user through getting the device out of Recovery Mode (a firmware update).• API update to detect when the device is in Recovery Mode.Firmware Update Success • Buzz: 2 short buzzes (250ms On, 250ms Off).• There is an open bug – currently there is no feedback for FW update success.23
Intel Confidential — Do Not Forward | 24Battery Behavior
Intel Confidential — Do Not Forward |[Planned] Status Alert: Low Battery25Device is inactive for 10 minutes or more. Device is InactiveOnce moved, Device indicates its low battery status. (and sends to the phone, if appropriate)CR
Intel Confidential — Do Not Forward | 26[Planned] Charging the Device Empty Charger Charging (Red, or Amber pending tuning ability) Charged (Blue)LoisClark
Intel Confidential — Do Not Forward |[Planned] Charging Behavior / Taking off of the charger if Power is On 27Display Status Alert: Normal sequence if battery is greater than low.Display Status Alert: Low Battery sequence if device battery is low.Additionally, if battery is not empty, BLE advertises and if Jewelry is in range, connects to paired phone.If the battery is dead, the Device will power on automatically on the charger as soon as it has enough charge.CR
Intel Confidential — Do Not Forward |

Navigation menu