Intel VLMRX58G Intel Video Link Module Rx 5.8 GHz User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3368696
Application ID	yyZ+mol1AEmQr8wMFI6QIA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.67kB (545858 bits)
Date Submitted	2017-04-24 00:00:00
Date Available	2017-04-24 00:00:00
Creation Date	2017-04-20 20:01:26
Producing Software	Microsoft® Word 2013
Document Lastmod	2017-04-20 20:01:26
Document Title	User manual
Document Creator	Microsoft® Word 2013
Document Author:	Andreas Gaede-Tsangas

Intel® Video Link Module Rx 5.8 GHz
Model: VLMRX58G
Manual (USA)
Revision 2.0
Revision History
Revision
2.0
Description
VLMRX58G – C2PC, Intel
FA5, Micro-UFL, USA
Date
2017-04-01
Overview
The VLMRX58G is the image receiving g device of a wireless video link system consisting of a
VLMTX58G transmitter and a VLMRX58G receiver/transceiver.
Instruction
Do only use
with specified antennas
within specified supply voltage range
interfacing via provided HDMI, USB port.
Page 1 of 4
Specification:
Supported frequency
ranges
DFS Operation
Modulation
Bandwidth
Data Rates
Supply Input range
Antenna connection
Permissive antenna
type/gain
Antenna configuration
5.15 GHz – 5.25 GHz
5.25 GHz – 5.35 GHz (DFS)
5.470 GHz – 5.725 GHz (DFS)
5.725 GHz – 5.85 GHz
Master (with radar detection)
OFDM 16QAM (similar to 802.11a/n) on a proprietary protocol
40 MHz
40 MHz mode: 72.46 Mbps
Min. 6 VDC , Typ. 10 VDC , Max. 28 VDC
µUFL
Connector type: 50 Ohm nominal
Intel FA5 antenna
Model: Antenna-002
Peak Gain: 8.02dBi
Type: (Circularly polarized) patch antenna
3 antennas (2 receiving antennas, 1 antenna multiplexed to 1x
receiving RF 1x transmitting antenna port
Transmitter Output Power
Band
USA
output power (conducted)
Band 1
5190MHz (CH38): 13.93 dBm
5.15 GHz – 5.25 GHz 5230MHz (CH46): 14.24 dBm
Band 2
5270MHz (CH54): 14.41 dBm
5.25 GHz - 5.35 GHz 5310MHz (CH62): 15.11 dBm
Band 3
5510MHz (CH 102): 12.57 dBm
5.470 GHz - 5.725 GHz 5550MHz (CH 110): 12.68 dBm
5590MHz (CH118): 12.13 dBm
5670MHz (CH134): 12.74 dBm
Band 4
5755MHz (CH 151): 12.78dBm
5.725 GHz – 5.85 GHz 5795MHz (CH159): 14.30dBm
Page 2 of 4
Connection
Figure 2 VLMRX58G Bottom View
5V
5V
GND
GND
USB
HDMI
Figure 1 VLMRX58G Top View
N/C
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help.
Important Note
Changes or modifications made to this equipment not expressly approved by Intel Corporation may
void the FCC and ISED authorization to operate this equipment.
Page 3 of 4
The product is provided with an approved antenna. Use only supplied or approved antenna by Intel
Corporation. Any changes or modifications to the Antenna may void the FCC and ISED regulatory
approvals obtained for the product.
End-users and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least
20 cm from all persons. RF exposure compliance must be ensured by integrator.
Contact
Intel Corporation
2200 Mission College Boulevard
Santa Clara, CA 95054
Page 4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Andreas Gaede-Tsangas
Creator                         : Microsoft® Word 2013
Create Date                     : 2017:04:20 20:01:26+02:00
Modify Date                     : 2017:04:20 20:01:26+02:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools