Intel VLMTX58G Intel Video Link Module Tx 5.8 GHz User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3345686
Application ID	Ksqq/iCpSa9GtUmTAUBz+w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.62kB (795249 bits)
Date Submitted	2017-04-05 00:00:00
Date Available	2017-04-05 00:00:00
Creation Date	2017-03-17 10:54:04
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-03-17 10:54:04
Document Title	User manual
Document Creator	Microsoft® Word 2010
Document Author:	Andreas Gaede-Tsangas

Intel® Video Link Module Tx 5.8 GHz
Model: VLMTX58G
Manual (USA, Canada)
Revision 1.0
Revision History
Revision
1.0
Description
VLMTX58G – Module
Change in ID and Multiple
Listing for USA and Canada
Date
2017-03-17
Overview
The VLMTX58G is the image transmitting device of a wireless video link system consisting of a
VLMTX58G transmitter and a VLMRX58G receiver/transceiver.
Instruction
Do only use
with specified antennas
within specified supply voltage range
interfacing via provided HDMI, USB port, THC connector.
Page 1 of 5
Specification
Module output
(frequencies)
DFS Operation
Modulation
Bandwidth
Data Rates
Supply Input range
Antenna connection
Permissive antenna
type/gain
Antenna configuration
Module Input
5.15 GHz – 5.25 GHz
5.25 GHz – 5.35 GHz (DFS)
5.470 GHz – 5.725 GHz (DFS)
5.725 GHz – 5.85 GHz
Client (without radar detection)
OFDM 16QAM (similar to 802.11a/n) on a proprietary protocol
10 MHz, 20 MHz 40 MHz
10 MHz mode: 18.11 Mbps
20 MHz mode: 36.23 Mbps
40 MHz mode: 72.46 Mbps
5 VDCV ± 10% / 1A
RP-SMA male
Connector type: 50 Ohm nominal
Manufacturer: STEREN
Model: WIFI Internal Antenna 3070-09-350
P/N: 3070-09-350
Peak Gain: 2.0 dBi
uncorrelated MIMO with 2 antennas multiplexed to 2x transmitting RF
ports and 1 x receiving RF antenna port
HDMI
Transmitter Output Power
Band
Band 1
5.15 GHz – 5.25 GHz
Band 2
5.25 GHz - 5.35 GHz
Band 3
5.470 GHz - 5.725 GHz
Band 4
5.725 GHz – 5.85 GHz
USA
output power
24 dBm
(conducted)
24 dBm
(conducted)
24 dBm
(conducted)
24 dBm
(conducted)
Page 2 of 5
Canada
output power
23 dBm
(EIRP)
23 dBm
(EIRP)
24 dBm
(conducted)
24 dBm
(conducted)
Connection
Figure 1 VLMTX58G Top View
HDMI in
Figure 2 VLMTX58G Bottom View
Antenna 1
THC
Antenna 2
50
USB
N/C
Pin
Signal
Designation
Pin
Signal
Designation
VCC_5V
+5V
VCC_5V
+5V
VCC_5V
+5V
VCC_5V
+5V
VCC_5V
+5V
VCC_5V
+5V
GND8
GND
GND5
GND
NC
GND4
GND
10
12
LED1
+3.3V (Video Indication)
11
Spare2
+3.3V PC5. Pull down using 4.7KOhm
14
LED2
+3.3V (Network Indication)
13
Spare1
+3.3V PC2. Pull down using 4.7KOhm
16
Link/ Boot Mode
GPIO
Active low (start registration in low). Keep
high or NC when not in use
15
Reset
Active Low
18
NC
17
NC
20
NC
19
NC
22
NC
21
NC
24
NC
23
Reserved
3.3V Pull down using 4.7KOhm
26
NC
25
Reserved
NC
28
NC
27
Reserved
3.3V Pull down using 4.7KOhm
30
GND7
GND
29
GND3
GND
32
Reserved
Pull Down using 4.7KOhm
31
GND2
GND
34
NC
33
Reserved
NC
36
NC
35
Reserved
NC
38
Reserved
NC
37
UART4_RX
+3.3V MAVLink
40
Reserved
NC
39
UART4_TX
+3.3V MAVLink
42
Reserved
NC
41
Reserved
Keep NC
44
Reserved
NC
43
Reserved
Keep NC
46
Reserved
NC
45
Reserved
Keep NC
48
Reserved
NC
47
Reserved
Keep NC
50
GND6
GND
49
GND1
GND
Table 1:Transmitter Host Connector
Page 3 of 5
FCC and ISED Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence.
L'autorisation d’exploitation est soumise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de d’interférences radioélectriques, et
(2) l'appareil doit accepter toute interference radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le bon fonctionnement.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
•
Consult the dealer or an experienced radio/TV technician for help.
ICES-003 Statement (Canada)
This digital apparatus does not exceed the Class
B limits for radio noise emissions from digital
apparatus set out in the interference-causing
equipment standard entitled “Digital Apparatus,”
ICES-003 of the Canadian Department of
Communications.
Cet appareil numérique respecte les limites
bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la
norme relatives aux interferences causée par du
matériel: “Appareils Numériques”, NMB-003
édictée par le Ministre Canadian des
Communications.
i. the device for operation in the band 5150-5250
MHz is only for indoor use to reduce the
potential for harmful interference to co-channel
mobile satellite systems;
i. Le dispositifs fonctionnant dans la bande
5150-5250 MHz sont réservés uniquement pour
une utilisation à l’intérieur afin de réduire les
risques d’interférence préjudiciable aux
systèmes de téléphonie satellitaire utilisant les
mêmes canaux;
ii. high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350
MHz and 5650-5850 MHz and that these radars
could cause interference and/or damage to LELAN devices.
ii. De plus, les utilisateurs devraient aussi être
avisés que les utilisateurs de radars de haute
puissance sont désignés utilisateurs principaux
(c.-à-d., qu’ils ont la priorité) pour les bandes
5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer des interférenceset/ou
des dommages aux dispositifs LAN-EL.
Page 4 of 5
iii. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies
with the e.i.r.p. limit;
iii. Pour les dispositifs dotés d'antenne (s)
amovible (s), le gain d'antenne maximal autorisé
pour les dispositifs dans les bandes 5250-5350
MHz et 5470-5725 MHz doit être tel que
l'équipement soit toujours conforme aux normes
e.i.r.p. limite;
iv. for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in
the band 5725- 5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits
specified for point- to-point and non-point-topoint operation as appropriate
iv. Pour les dispositifs dotés d'antenne (s)
amovible (s), le gain d'antenne maximal autorisé
pour les dispositifs de la bande 5725- 5850 MHz
doit être tel que l'équipement soit toujours
conforme aux normes e.i.r.p. Limites spécifiées
pour les opérations point à point et non point-àpoint selon le cas
Important Note
Changes or modifications made to this equipment not expressly approved by Intel Corporation may
void the FCC and ISED authorization to operate this equipment.
The product is provided with an approved antenna. Use only supplied or approved antenna by Intel
Corporation. Any changes or modifications to the Antenna may void the FCC and ISED regulatory
approvals obtained for the product.
Les modifications ou modifications apportées à cet équipement qui ne sont pas expressément
approuvées par Intel Corporation peuvent annuler l'autorisation de la FCC et de l'ISED pour utiliser cet
équipement.
Le produit est fourni avec une antenne approuvée. Utilisez uniquement une antenne fournie ou
approuvée par Intel Corporation. Toute modification ou modification de l'antenne peut annuler les
certifications réglementaires FCC et ISED obtenues pour le produit.
End-users and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
Operations in the 5150 - 5250 MHz band are restricted to indoor usage only. This device is not
allowed to operate in the 5600-5650 MHz band as required by Canada regulation (ISED).
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least
20 cm from all persons. RF exposure compliance must be ensured by integrator.
Contact
Intel Corporation
2200 Mission College Boulevard
Santa Clara, CA 95054
Page 5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : de-DE
Tagged PDF                      : Yes
Author                          : Andreas Gaede-Tsangas
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:03:17 10:54:04+01:00
Modify Date                     : 2017:03:17 10:54:04+01:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools