IntelliDOT IDOT-002 200077-01 RF3 Board User Manual
IntelliDOT 200077-01 RF3 Board
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1160372 |
| Application ID | QeHWU6Iya+I+u0HESIieJQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 2.88kB (35939 bits) |
| Date Submitted | 2009-08-27 00:00:00 |
| Date Available | 2009-08-28 00:00:00 |
| Creation Date | 2009-08-24 18:26:32 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2009-08-24 18:26:32 |
| Document Title | Microsoft Word - intellidot_install_guide_DN001-01 200077-01_REV_C.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | DW8 |
IntelliDOT Corporation 13520 Evening Creek Drive North Suite 400 San Diego, CA 92128 858-746-3100 tel www.intelliDOT.net Work Instruction: Design Notes and Install Guide: Utilizing the RF3 Module Model: 200524-01 Document Number: DN001-01 Revision: C Name Title Document author: Trace Funderburk Director of Manufacturing Approved by: William Roof VP of Engineering Approved by: Mike Oslovar Director of Quality Assurance Date effective 6/16/06 9 Aug 09 24 aug 09 Change approval reference Initial The change from previous revision Signature Revision level Release Added Regulatory information, Section 7, Edited document title. David Waitt Added section 5.2.3 and dimension drawing to section 7.0 per TCB request - David Waitt All Quality System Documents are Controlled in Sharepoint. All other copies are considered UNCONTROLLED. Document Number: DN001-01 Revision: C Title: Design Notes: Utilizing 200077-01 RF3 Boards in future designs 1. Objective 1.1 The objective of this procedure is to identify any special notes that have to do with the integration of the Assembly RF3 Board (200077-01) into future designs. 2. References NONE 3. Definitions RF3 Board: is a communications module, currently used in Models MT150M and MT200 FCC: Federal Communication Commission IC: Industry of Canada 4. Responsibilities VP of Engineering: is responsible for making sure the instructions are adhered to. Any deviation from the instructions below require retesting and certification of the RF3 Module. 5. Instruction 5.1 RF3 board has been certified as a module, allowing for the module to be used in multiple designs. Currently those designs are the IntelliDOT CAREt MT150M and MT200. 5.2 Including the RF3 Module in future CAREt designs must: 5.2.1 NOT alter the module design in any way, including but not limited to the frequency of operation, the power output requirements or the on-board antenna configuration. 5.2.2 KEEP labeling in manuals, CAREt and module labels that meet the requirements associated with the certification and registration with the FCC and IC. This includes but is not limited to safety warnings, registration notes and identification. 5.2.3 Only incorporate the module in designs that employ only minor construction differences from the CAREt M150 and M200 models. 6. Distribution All parties working on the electrical design of the RF3 board or the inclusion of the RF3 board in any hand held design shall be provided a copy of this document. All Quality System Documents are Controlled on Sharepoint. All other copies (printed or soft) are considered UNCONTROLLED. IntelliDOT CONFIDENTIAL PRINTED: 8/24/2009 Page 2 of 4 Document Number: DN001-01 Revision: C Title: Design Notes: Utilizing 200077-01 RF3 Boards in future designs Regulatory Requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 7. Regulatory Requirements This device has been certified with a “Limited Modular Approval” Wit this certification the device can be integrated into different hosts providing that the conditions and requirements below are met. User Manual Requirements The user manual for the host device must include the following statement required by FCC Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this device not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The user manual shall NOT contain any instructions on how to remove the device from the host. Labeling Requirements The external surface of the host must be labeled with the following information: “Contains FCC ID R9M-IDOT-002 IC: 7701A-IDOT002” Additionally the external label should contain the following statement, unless the devcice is too small to incorporate the wording. In that case the text must appear in the user manual with the text above This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. All Quality System Documents are Controlled on Sharepoint. All other copies (printed or soft) are considered UNCONTROLLED. IntelliDOT CONFIDENTIAL PRINTED: 8/24/2009 Page 3 of 4 Document Number: DN001-01 Revision: C Title: Design Notes: Utilizing 200077-01 RF3 Boards in future designs RF Exposure Requirements The user manual for the host device must instruct the user that any body worn accessories used with the device may not contain any metal in close proximity to the host device. The host device must maintain the internal separation distances outlined below between the internal antenna and the closets external surface of the device. The host device shall not contain any metallic components in close proximity to the antenna of the module. 1 cm Front View Display 1 cm Antenna 2.7 cm Top View Front of the unit 3 cm Side View 3 cm Rear of the unit All Quality System Documents are Controlled on Sharepoint. All other copies (printed or soft) are considered UNCONTROLLED. IntelliDOT CONFIDENTIAL PRINTED: 8/24/2009 Page 4 of 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2009:08:24 18:26:32-07:00 Create Date : 2009:08:24 18:26:32-07:00 Format : application/pdf Title : Microsoft Word - intellidot_install_guide_DN001-01 200077-01_REV_C.doc Creator : DW8 Document ID : uuid:bb1512fe-853b-4bf1-b89b-93d2ffa2d9bf Instance ID : uuid:cfecd9e4-eaf4-46ab-8bf6-4616243d9125 Page Count : 4 Author : DW8EXIF Metadata provided by EXIF.tools