Intelligent Technology FW151A IEEE 802.11n Wireless 1T1R Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2010799
Application ID	Hhlt00iy6HWAus+mMnHKsw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.1kB (438729 bits)
Date Submitted	2013-07-08 00:00:00
Date Available	2013-07-08 00:00:00
Creation Date	2017-10-26 18:09:54
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 18:09:54
Document Title	Microsoft Word - User Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	maggie

Quick Start Guide
FW151A
IEEE802.11n Wireless 1T1R Router
This Quick Start Guide is intended for experienced installers. For more
information, refer to the relevant sections in the FW151A Manual.
Hardware Installation
‹ General Hardware Features
Step 1: Set the slider to Router
Step 2: Connect to an Ethernet port with Internet access.
Step 3: Connect the USB port to a power adaptor or computer.
Driver Installation
Windows 7:
If you connect the FW151A's USB port to a computer running Windows 7,
the Autopaly screen will display. Click Setup.exe to install the USB driver.
For previous versions of Windows, locate and double‐click the Setup.exe
file in the CD drive on your computer.
Step 1: Click the my computer, there is no “FW151A_Autorun” disk.
Step 2: Put the USB plug to the port of computer, then it will
display“FW151A_Autorun” disk.
Step 3: Click the icon FW151A_Autorun, the atuopaly screen will display.
Click Setup.exe to install USB network drivers.
Step 4: Compete Step 1 to 3, check the computer management and
device manager.
Windows XP:
If you connect the FW151A's USB port to a computer running Windows
XP. Click Setup.exe to install the USB driver. For previous versions of
Windows, locate and double‐click the Setup file in the CD drive on your
computer.
Step 1: Click the my computer, there is no “FW151A_Autorun” disk.
Step 2: Put the USB plug to the port of computer, then it will display
“FW151A_Autorun” disk.
Step 3: Open FW151A‐Autorun disk. Click the Setup.exe to install USB
network drivers.
Step 4: Compete Step 1 to 4, check the computer management and
device manager.
Accessing the Web Configurator
FW151A default vaule:
IP address: 192.168.1.1
Username: admin
Password: admin
Router Mode:
If your FW151A’s hardware slider switch to Router.
Step 1: Make sure your FW151A hardware is properly connected and
prepare your computer or computer network to connect to the FW151A.
Because the DHCP server is enable, so we don’t need manual set local IP
address.
Step 2: Launch your web browser.
Step 3: The FW151A default IP as 192.168.1.1. Type "http://192.168.1.1"
as the website address.
AP Mode:
If your FW151A’s hardware slider switch to AP. When the FW151A work
on AP mode, the DHCP sever is disable.
Step 1: Set the local IP address must be in the same subnet of FW151A.
Step 2: Launch your web browser.
Step 3: Type "http://192.168.1.1" as the website address.
WISP+UR Mode:
If your FW151A’s hardware slider switch to WISP+UR.
Step 1: Make sure your FW151A hardware is properly connected and
prepare your computer or computer network to connect to the FW151A.
Because the DHCP server is enable, so we don’t need manual set local IP
address.
Step 2: Launch your web browser.
Step 3: The FW151A default IP as 192.168.1.1. Type "http://192.168.1.1"
as the website address.
Wireless Connection
Manual Connection:
SSID: FW151A
KEY: 00000000
Step 1: Make sure the wireless LAN is enabled your FW151A.
Step 2: Make sure the wireless adapter on your computer is working
properly.
Step 3: Select the SSID and enter the wireless security key to connect
your computer to the FW151A
Using WPS:
Step 1: Make sure your FW151A is turned on and working as an AP or
wireless router. Make sure the device is placed within range of your
network.
Step 2: Make sure that you have installed the wireless client in your
computer.
Step 3: In the wireless client utility, find the WPS settings. Enable WPS
and press the WPS button.
Step 4: Press the WPS hardware button of FW151A.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes
or modifications not expressly approved by party responsible for
compliance coulk void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co‐located or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : maggie
Create Date                     : 2013:07:05 16:46:18+08:00
Modify Date                     : 2013:07:08 17:09:03-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2013:07:08 17:09:03-07:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual
Creator                         : maggie
Document ID                     : uuid:9ad59393-17bd-4c22-92e3-7e131a446f17
Instance ID                     : uuid:54d63cec-ed53-4c3e-a6ca-f8a4ecf2b631
Page Count                      : 12

EXIF Metadata provided by EXIF.tools