2757 2767 PIB
2015-08-27
: InterLogix 2757 2767 Pib 2757_2767_PIB library
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
S E N T R O L P R O D U C T I N F O R M A T I O N B U L L E T I N 2757/2767 SERIES HIGH SECURITY CONCEALED MAGNETIC CONTACTS LISTED • Ideal for high security applications Specifically designed for high security applications • Balanced, triple-biased features make defeat of switch virtually impossible in prisons, military installations, government facilities, and commercial operations the Sentrol 2757/2767 Series Magnetic Contacts are virtually impossible to defeat . Total encapsulation coupled with recess • Fits standard ANSI door cut-outs mounting prevents access to the switch and to cabling, • Adjustable contact (2767) and magnet for loose fitting doors and prevents tampering with an external magnet . These contacts are factory calibrated for operation in steel and are not subject to sticking or freezing on seldom-used doors . In addition, the 2767 Contacts are adjustable for use in loose fitting doors . continued 2757/2767 Sentrol Series Product Descriptions and Specifications The 2757/2767 is comprised of three independent Form C biased reed switches wired in SPOT configuration . The 2757D has six independent Form C biased reed switches wired in DPDT configuration . They all conform to the specifications for Class IV Preadjusted Balanced Magnetic Contacts and are UL rated . For central station direct wire circuits (indoor and outdoor) . Each contact and magnet has a face plate of 14 ga . stainless steel with mounting holes on 4 .125" centers, countersunk for #8 flathead screws . All contacts and magnets are potted in polyurethane in their respective housings . The contacts have an actuating gap distance (make) of up to 0 .4" (1 .031 cm), and are provided with a supervised loop . The 2767 contact is adjustable ±0 .3" from end to end, and ±0 .25" from side to side . Electrical diagrams 2757 Installation Instructions The 2757/2767 Magnetic Contacts are designed to fit into standard ANSI cutouts for mortise installation . If door and jamb are provided with ANSI cutouts and blanks, simply remove the blanks and install the switch and magnet in place . If no cutout is provided, cut holes 1 .25" (3 .18 cm)W x 4 .875" (12 .38 cm)L x 1 .250" (3 .18 cm)D in both the door and jamb for the 2757 and 2757D models, and 1 .25" (3 .18 cm)W x 4 .875" (12 .38 cm)L x 1 .000" (2 .54 cm)D for the 2767 . Switch and magnet should be within 0 .625" both vertically and horizontally for proper alignment . Connect contact leads to security loop per the electrical schematics below and test the loop for continuity . Electrical Specifications : Voltage Current Power 50 V AC/DC max 0 .5 A max 2 .5 W max 2767 3 50' 0 .875" 8 .89 cm 2 .22 cm I- 4,875' 12 .38 cm 3 .250' 8 .26 cm Note : 2757D is up to 1 .5' 3 .81 cm I 1 .000" 2 .54 cm c$D 0 .875' 1 .25' 2 .22 cm 3 .18 cm 1, r : 4 .125' 10 .48 cm 4.875' 12 .38 cm 0 .640' 1 .63 cm 4 .125" 10 .48 cm Ordering Information ' Gap distance part Number Loop Type Electrical Configuration Gap Distance* Lead Type 2757 Open or Closed SPDT Up to 0 .4" 3' Vinyl jacketed 2757D Open or Closed DPDT Up to 0 .4" 3' Vinyl jacketed 2767 Open or Closed SPDT Up to 0 .375" 3' Vinyl jacketed is nominal make distance ±20% CORPORATE HEADQUARTERS SENTROL . INC 12345 SW Leveton Dr., Tualatin, OR 97062 Tel. ; 503.692 .4052 Fax : 503 .691 .7566 http :/Iwww.sentrol .com U .S . & Canada : 800 .547 .2556 Technical Service : 800 .648 .7424 FaxBack : 800.483 .2495 Sentrol reserves the right to change specifications without notice . ©1996 Sentrol, Inc . C-2121-FLG10K-0496 Printed on recycled paper
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:9b66528d-130c-4a5d-8789-c01e6b3fec2e Producer : OmniPage 12 http://www.scansoft.com Create Date : 2005:03:31 10:36:12Z Creator Tool : OmniPage 12 http://www.scansoft.com Modify Date : 2005:03:31 10:46:45-08:00 Metadata Date : 2005:03:31 10:46:45-08:00 Document ID : uuid:91e89f1a-e69c-4c0f-ac8d-b3b05efe5086 Format : application/pdf Creator : OmniPage 12 http://www.scansoft.comEXIF Metadata provided by EXIF.tools