4661034 Itif Ultra Gard & Custom Versions Installation Instructions Apr 1997
2015-08-27
: InterLogix Ultragard & Custom Versions Installation Instructions Apr 1997 UltraGard & Custom Versions_Installation Instructions_Apr 1997 library
Open the PDF directly: View PDF
Page Count: 64
- Special Installation Requirements
- Requirements for UL-Listed Installations
- Canada Listings
- California State Fire Marshall Listing
- Installing the System
- Determining the Panel Location
- Running Wires to the Panel Location
- Mounting the Panel
- Installing the Panel Antennas
- Wiring the Panel
- Setting the Optional Energy Saver Module (ESM), Hardwire Input Module (HIM) and Hardwire Output M...
- Installing the Backup Battery
- Powering Up the Panel
- Adjusting Status Sound Volume
- Programming the Panel
- Clearing Memory
- Entering and Exiting Program Mode
- Deleting Sensor Text
- Programming Sensor Text
- Adding (Learning) Wireless Sensors
- Adding (Learning) Hardwire Sensors
- Deleting Sensors and Hardwire Zones
- Programming Upper Sensors
- Programming Optional Feature Numbers
- Adding (Learning) Wireless Touchpads
- Programming Panel Configuration Options
- Programming the Primary Phone Number
- Programming the Phone Format
- Programming the Siren Time-out
- Programming the Install Code
- Programming the Account Number
- Programming the Entry Delay
- Programming the Extended Delay
- Programming the Exit Delay
- Programming the Activity Time-out
- Programming the House Code
- Programming the Energy Saver Module Freeze and Set Temperatures
- Programming the Touchpad Options
- Programming the Touchpad Unit Number
- Programming the Touchpad Quiet
- Programming Touchpad Key Beeps
- Programming the Interrogator 200 Audio Verification Module Mode, Time-out, and Access Code
- Programming HOM Points
- Programming the Time Zone
- Viewing or Programming the User-Programmable System Settings
- The Duress Code
- Adjusting the Alphanumeric Touchpad Display Brightness
- Requesting CS-4000/Downloader Programming
- Installing Line Carrier Devices
- Installing and Programming the Wireless Interior Siren (WIS)
- Setting the WIS DIP Switches and Installing the Battery
- Connecting an External Siren to the WIS
- Programming the WIS House Code
- Installing X-10 Lamp Modules
- Testing the System
- Testing Sensors
- If a Sensor Fails the Sensor Test
- Testing the Energy Saver Module (ESM)
- Testing the Hardwire Input Module (HIM)
- Testing the Hardwire Output Module (HOM)
- Testing the X-10 Lamp Modules
- Testing Phone Communication
- Testing Central Station Communication
- Displaying the Panel Version Code
- Appendix A: Command Summary
- User Operating Command Summary
- System Settings (User-Programming) Command Summary
- Appendix B: Troubleshooting
- Appendix C: Programming Tables
- Appendix D: System Planning Worksheets
- Appendix E: Panel Connections and Wiring
- Appendix F: UL Requirements