9 XXX Name Installation Sheet 466 5444 A Interlogix Rcr Rex Install Guide

2018-11-08

: Interlogix 466-5444-A-Interlogix Rcr Rex Install-Guide 466-5444-a-interlogix_rcr_rex_install-guide library

Open the PDF directly: View PDF .
Page Count: 7

Scroll down to view the document on your mobile browser.

RCR-REX Request-to-Exit Dual Technology Motion Sensor Installation Guide
Introduction
Installation
Figure 1: Open the cover
Figure 2: Remove the circuit board and cradle
Figure 3: Mounting and wiring access
- Wiring
  - Basic Hook-up
Figure 4: Basic hook-up
- Spike Protection
Figure 5: Spike Protection
- RCR-REX and a Keycard Reader
Figure 6: RCR-REX and a keycard reader
- Monitor Door Contacts (first option)
Figure 7: Monitor door contacts (first option)
- Monitor Door Contacts (second option)
Figure 8: Monitor door contacts (second option)
- Panic Button
Figure 9: Panic Button
- NC, C, NO (I/O) Monitor Relay Section
- R (input) Arm
- S (input) Sounder
- X (input) External
- D (input) Door
- T and T Tamper Switch
- COM (I/O) Common or Ground
- DIP Switch Options
- S2-1 (sounder enable)
- S2-2 (LED control)
- S2-3 (timer reset mode)
- S2-4, S2-5, S2-6 (relay time)
- S2-7 (door monitor mode)
- S2-8 (relay mode)
Initial Power Up
- LED Indicator
- Internal Sounder
- Pattern Adjustment
- PIR Detection Pattern
Figure 10: PIR Detection Pattern
Figure 11: PIR Pattern Adjustment
- Radar Detection Pattern
Figure 12: Radar Detection Pattern
Figure 13: Range Adjustment Control
Operation
- Fail Safe/F ail Secure Modes
Figure 14: Fail Safe/Fail Secure Modes Relay Contacts
- Mask Installation
Figure 15: Mask installation
Specification
Product Ordering
FCC Compliance
Disclaimer
- Contact Information

Navigation menu