Intermatic CA3000 Single Pole & Multi-Way Relay Type Wall Switch User Manual CA3000
Intermatic Inc Single Pole & Multi-Way Relay Type Wall Switch CA3000
Exhibit D Users Manual per 2 1033 b3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 764077 |
| Application ID | +8FdCfmhjTjf25OM4Mt/jg== |
| Document Description | Exhibit D Users Manual per 2 1033 b3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 68.1kB (851256 bits) |
| Date Submitted | 2007-03-02 00:00:00 |
| Date Available | 2007-03-02 00:00:00 |
| Creation Date | 2006-07-31 20:57:06 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2006-07-31 20:57:06 |
| Document Title | CA3000.cdr |
| Document Creator | PScript5.dll Version 5.2 |
TM Providing a Brighter Solution™ This product is compatible with other Z-Wave™ enabled products Model CA3000 Single Pole & Multi-Way Relay Type Wall Switch WIRELESS CONTROLS The CA3000 Wall Switch is a Z-wave™ enabled device which is fully compatible with any Z-wave enabled network. Z-wave enabled devices display the Z-wave logo and guarantee connectivity and interoperability between devices. Each line powered node in a Z-wave network is designed to act as a repeater forming a mesh network eliminating radio “dead spots” and providing the highest level of reliability. Features - Multiple location On/Off when used with wireless accessory controls. - Multiple location On/Off control using conventional 3-way or 4-way wiring and devices. - Mini-scenes allows local control of connected load plus up to 5 additional Z-wave enabled devices. - Full 230 device scene control when used with Intermatic InTouch™ server (CA5500B). - Switch always operates local load, and does not require central control system. WARNING: Read instructions completely before installation and retain for future reference. WARNING: For installation and/or use in accordance with appropriate electrical codes and regulations. WARNING: Consult a qualified electrician for installation and operation. OTHER CAUTIONS: 1. Use only one (1) switch per load. For remote operation, use standard 3-way or 4-way electrical devices for ON/OFF operation or use with Z-Wave compatible control for wireless control from any location. 2. Disconnect power when servicing or changing load. 3. Use this device only with copper or copper clad wire. Specifications: Single-Pole (One Location) or 3-Way (Multi-Location) or Wireless RF Control Operating Temperature Range: 32°F (0°C) to 104°F (40°C) Power Consumption: 2.0W Max Ratings: 120VAC, 50/60Hz 1800 Watts 15A Tungsten; 1800 Watts 15A Resistive/Inductive; 1800VA 15A Ballast; 1/2HP Motor Colors: Includes white, ivory, and light almond snap-on rocker plates. Connections: Black-Line, Blue-Load, Red-Traveler, White-Neutral, Green-Ground RF Information: Minimum Range: 50ft indoor; 100ft outdoor Frequency: 908.42 MHz Network Information: Mesh Network - Each line powered node acts as a repeater to route distant signals. Data Rate: 9600 bits/second Size: 232 Z-Wave™ Nodes INSTALLATION: 1. WARNING: TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER AND TEST THAT POWER IS OFF BEFORE WIRING. 2. For retrofit applications, remove wall plate and disconnect switch. 3. Refer to wiring diagrams for proper connection of switch for intended application. 4. Check that all wire connections are secure. 5. Place all wires inside junction box. Install switch using (2) mounting screws furnished. Complete installation with a decorator style wall-plate. 6. Reconnect your electrical power. 7. Operation: Tap top of rocker to turn load on; tap bottom of rocker to turn load off. 8. For programming instructions refer to the InTouch Installer & Users Guide (158CA12789). Rocker Color Conversion The frame and rocker color of this device can be converted to match interior design requirements. Simply use one of the included color plates (white, ivory, or light almond) and proceed as follows (please note that the device must be removed from the junction box to change the rocker, follow the installation instructions and warnings). 1. Select the color of the face you desire. 2. The frame has snaps on its sides. Using a small screwdriver or thumbnail, gently remove the frame and rocker from the housing body. 3. Take the new frame and position it properly to the housing body. Notice that the locking snaps will align in only the proper direction. Line up the plastic snaps with the slots in the housing body and snap into place. 4. The frame snaps in with an audible click. Ensure that both snaps are secure. Replace the device in the junction box following installation instructions. The color conversion is complete. Rocker Frame Snap FCC STATEMENT OF COMPLIANCE This device complies with part 15 of the FCC rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna or device. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. WARNING! Changes or modifications not expressly approved by Intermatic Inc. could void the user’s authority to operate the equipment. 158CA12470REF TM Providing a Brighter Solution™ WIRELESS CONTROLS This product is compatible with other Z-Wave™ enabled products For non-standard wiring applications, refer to Wire Combination & Connector Chart Wire Connector Installation Connect wires per Single Pole, 3-Way, or Multi-Way Application Diagrams as follows: Screw wire connectors on clockwise making sure no bare conductors show below the wire connector. Secure each connector with electrical tape. Yellow Wire Connector Combination Chart Insert wires straight then twist clockwise 120VAC 50/60 Hz 1- #14 AWG 1- #16 AWG Black Green White Neutral 3-Way Application Blue Hot Red Load 120VAC 50/60 Hz Black Green White Neutral CA3000 Wire Connector 1 to 2 #12 AWG 1 to 3 #14 AWG 1 to 4 #16 AWG or or or 1 to 3 #14 AWG 1 to 4 #16 AWG 1 to 4 #18 AWG or or 1 to 4 #16 AWG 1 to 4 #18 AWG Secure each connnector with electrical tape Single Pole Application Hot 1- #12 AWG 1 #12 AWG or 2 #14 AWG or 2 #16 AWG 3/8” Strip wires to expose 3/8” of conductors 1- #10 AWG Blue Red CA3000 Wire Connector Ground Jumper Load CA-3PS / Standard 3-Way Switch Ground Multi-Way Application Hot 120VAC 50/60 Hz Black Green White Neutral Wire Connector Blue Red CA3000 Load CA-3PS / Standard 3-Way Switch CA-4PS / Standard 4-Way Switch CA-4PS / Standard 4-Way Switch CA-3PS / Standard 3-Way Switch Ground LIMITED TEN YEAR WARRANTY If within ten (10) years from date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace, at its sole option. This warranty applies only to the original purchaser and is not transferable. This warranty excludes and this is disclaimed liability for labor for removal of this product or reinstallation. The warranty does not apply to: (a) damage caused by accident, abuse, mishandling, dropping, acts of God, or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart, or otherwise modified; (c) units not used in accordance with directions; (d) damages exceeding the cost of the product. Some states do not allow a limitation of damages, so the foregoing limitation may not apply to you. This warranty gives you specific legal rights and you may have other rights that vary from state to state. INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing postage prepaid to the nearest authorized service center listed. Please be sure to wrap the product securely when mailing to avoid shipping damage. This warranty is made by: Intermatic Incorporated, After Sales Service, 7777 Winn Road, Spring Grove, IL 60081-9698, 815-675-7000 www.intermatic.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:0a25cebf-81cd-44fd-87a4-db440dcbaa90 Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2006:07:31 20:57:06-05:00 Create Date : 2006:07:31 20:57:06-05:00 Document ID : uuid:0823a46e-1682-470a-b2c2-fc47470bb2b7 Format : application/pdf Title : CA3000.cdr Creator : Author :EXIF Metadata provided by EXIF.tools