Intermatic CA3500 Split-Duplex Receptacle User Manual CA3500

Intermatic Inc Split-Duplex Receptacle CA3500

Exhibit D Users Manual per 2 1033 b3

WARNING: Read instructions completely before installation and retain for future reference.WARNING:WARNING:OTHER CAUTIONS:For installation and/or use in accordance with appropriate electrical codes and regulations.Consult a qualified electrician for installation and operation.1. For remote operation, use with Z-Wave compatible control for wireless control from any location.2. Disconnect power when servicing or changing load.3. Use this device only with copper or copper clad wire.Model CA3500Split-Duplex ReceptacleSpecifications:Ratings:Colors:Connections:RF Information:Network Information:Local control via Activator Buttonor Local Control via Current Senseor Wireless RF ControlIncludes white, ivory, and light almondsnap-on face plates.Black-Line, White-Neutral,Green-GroundMinimum Range:50ft indoor; 100ft outdoorFrequency: 908.42 MHzMesh Network - Each line powerednode acts as a repeater to routedistant signals.Data Rate: 9600 bits/secondSize: 232 Z-Wave™ NodesOperating Temperature Range:32°F (0°C) to 104°F (40°C)Power Consumption: 2.0W Max125VAC, 50/60Hz15A General Purpose LoadsINSTALLATION:1. WARNING: TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER ANDTEST THAT POWER IS OFF BEFORE WIRING.Operation:2. For retrofit applications, remove wall plate and disconnect receptacle.3. Refer to wiring diagram for proper connection of receptacle.4. Check that all wire connections are secure.5. Place all wires inside junction box. Install receptacle using (2) mounting screws furnished. Completeinstallation with a decorator style wall-plate.6. Reconnect your electrical power.7. Press activator button to turn load on; press activator button to turn load off.8. For programming instructions refer to the (158CA12789).InTouch Installer & Users GuideThe CA3500 Split-Duplex Receptacle is a Z-wave™ enabled device which is fully compatible with any Z-waveenabled network. Z-wave enabled devices display the Z-wave logo and guarantee connectivity andinteroperability between devices. Each line powered node in a Z-wave network is designed to act as arepeater forming a mesh network eliminating radio “dead spots” and providing the highest level of reliability.- Multiple location On/Off control of receptacle when used with wireless accessory controls.- “Local Control” feature senses user need for current and will automatically activate receptacle.- Up-front activator switch always operates local load, does not require central control system.FeaturesFaceplate Color ConversionThe frame and faceplate color of this device can beconverted to match interior design requirements.Simply use one of the included color plates (white,ivory, or light almond) and proceed as follows (pleasenote that the device must be removed from the junctionbox to change the faceplate, follow the installationinstructions and warnings).1. Select the color of the face you desire.2. The frame has snaps on its sides. Using a smallscrewdriver or thumbnail, gently remove the frame andfaceplate from the housing body.3. Take the new frame and position it properly to thehousing body. Notice that the locking snaps will align inonly the proper direction. Line up the plastic snaps withthe slots in the housing body and snap into place.4. The frame snaps in with an audible click. Ensure thatboth snaps are secure. Replace the device in thejunction box following installation instructions.The color conversion is complete.FaceplateSnapFCC STATEMENT OF COMPLIANCEWARNING! Changes or modifications not expressly approved by Intermatic Inc. could void the user’s authority to operate theequipment.This device complies with part 15 of the FCC rules. Operation of this device is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna or device.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This product is compatible with other Z-Wave enabled products™Providing a Brighter Solution™158CA12477REFWIRELESS CONTROLSTM
WhiteStandard InstallationHot BlackNeutralWire Connector GroundGreen120VAC50/60 HzCA3500ActivatorButtonHotReceptacleControlledReceptacleStatusLEDThis product is compatible with other Z-Wave enabled products™LIMITED TEN YEAR WARRANTYIf within ten (10) years from date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace, at itssole option. This warranty applies only to the original purchaser and is not transferable. This warranty excludes and this is disclaimed liability for labor forremoval of this product or reinstallation. The warranty does not apply to: (a) damage caused by accident, abuse, mishandling, dropping, acts of God, or anynegligent use; (b) units which have been subject to unauthorized repair, opened, taken apart, or otherwise modified; (c) units not used in accordance withdirections; (d) damages exceeding the cost of the product. Some states do not allow a limitation of damages, so the foregoing limitation may not apply to you.This warranty gives you specific legal rights and you may have other rights that vary from state to state.This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing postage prepaid to thenearest authorized service center listed. Please be sure to wrap the product securely when mailing to avoid shipping damage. This warranty is made by:Intermatic Incorporated, After Sales Service, 7777 Winn Road, Spring Grove, IL 60081-9698, 815-675-7000 www.intermatic.comINTERMATIC INCORPORATED WILL NOT BELIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES.ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULARPURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION ASTHE WARRANTY PERIOD STATED ABOVE.Wire Connector InstallationConnect wires as follows:Screw wire connectors on clockwise making sure nobare conductors show below the wire connector.Secure each connector with electrical tape.Insert wires straightthen twist clockwiseSecure each connnectorwith electrical tapeStrip wires to expose3/8” of conductors3/8”For non-standard wiring applications, refer toWire Combination & Connector ChartYellow Wire Connector Combination Chart1- #10 AWG1 #12 AWGor2 #14 AWGor2 #16 AWG+1- #12 AWG1to2#12AWGor1to3#14AWGor1to4#16AWG+1- #14 AWG1to3#14AWGor1to4#16AWGor1to4#18AWG+1- #16 AWG1to4#16AWGor1to4#18AWG+CA3500 SplitDuplex ReceptacleProviding a Brighter Solution™WIRELESS CONTROLSTM

Navigation menu