Intermec Technologies 1555-2450 Hand Held Tag Reader User Manual Corrected page for

Download:
Mirror Download [FCC.gov]
Document ID	149123
Application ID	Pva6ewR6JhP6zfGGhIdc3Q==
Document Description	Corrected page for user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.6kB (20014 bits)
Date Submitted	2001-05-10 00:00:00
Date Available	2001-05-24 00:00:00
Creation Date	2001-05-10 15:13:23
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-10 15:14:10
Document Title	Corrected page for user manual

Regulatory statements
USA & Canada: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This
device requires a radio license, unless it it used totally inside a building. (The user must obtain this license.)
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil exige une
license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir cette license.)
To prevent radio interference to the licensed service, this device is intended to be operated indoors only and should be kept away from windows
to provide maximum shielding.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant
to part 15 of the FCC Rules and it must not be used in a residential environment; however, it has also been tested and found to comply with the more
stringent requirements for a class B device, pursuant to Part 15 of the FCC rules. It generates, uses, and can radiate radio frequency energy. If
not installed and used in accordance with the instructions, it may cause interference to radio communications. If this equipment causes interference,
the user will be required to correct the interference at the user’s own expense.
To maintain compliance with the FCC Rules, the I/O cables that interconnect between the device and any peripheral (such as a reader) must be
as specified by Intermec.
This product complies with the American National Standards Institute NCIT 256-1999 standard for RFID Item Management.
Operator Warning: FCC regulations limit exposure to radio frequency (RF) radiation. To comply with these regulations, the operator of this
device must maintain a distance of at least 5 cm (2 inches) from the front part of the device to any bystanders under normal operating conditions.
While the device is on, the operator’s body and parts of the body, such as eyes, hands, or head, must be 5 cm (2 inches) or farther
from the front of the device.
This device is UL listed (UL 1950/C22.2 No. 950) for safety when powered by a host system or by one of the following external Intermec
power supplies: Catalog No. and P/N 043230 ~100V, 50/60 Hz or Catalog No. and P/N 047793 ~120V, 60 Hz. This device is CSA
certified.
Intermec hereby declares that the Sabre 1555 has been tested and found compliant with the below listed standards as required by the EMC Directive
89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as amended by 93/68/EEC: EN55022, EN50082-2, EN60950
This device is TÜV GS licensed (EN 60950 and EN 60825-1) for safety when powered by a host system or by the following external Intermec power
supply: Catalog No. and P/N 047795 ~230V, 50 Hz. For 240V applications use the power supply: Catalog No. 047794 (P/N 5014UK) ~240V, 50
Hz. The device is CSA certified.
Australia-New Zealand: This equipment has been tested and found to conform to the Australian EMC framework
concerning Class
standard AS/NZS 3548.
digital
devices,
prescribed
by
the
Australian
and
New-Zealand
N309
Mexico: Este equipo cumple con la certificatión NOM.
The information contained in this document is for informational purposes only and is subject to change without notice. No part of this document
may be copied or reproduced in any manner without the prior written permission of Intermec Technologies Corporation.
Sabre products are covered by patents issued or pending in the USA and other countries.
The word Intermec, the Intermec logo, Sabre and EasySet are either trademarks or registered trademarks of Intermec.
Throughout this document, trademarked names may be used. Rather than put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.
To comply with RF exposure limits, bystanders should stay away from the front of this product, at least 5 cm (2 in) for
the
2450
MHz
version
and
cm
(1.5
in)
for
the
915-MHz
version,
when
it is in operation. This product complies with all other RF exposure requirements while the unit is in operations,
including specific absorption rate (SAR) limits for the user's hand.
Changes or modifications not expressly approved by Intermec could void the user's authority to operate this equipment.
11
1555gs PC.p65
11
5/10/01, 3:11 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:05:10 15:14:10-06:00
Create Date                     : 2001:05:10 15:13:23-06:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 1

EXIF Metadata provided by EXIF.tools