Intermec Technologies 2011B-2 2011B Radio in 700C, 751G, and CN2NI/CN2 User Manual CN2NI Compliance Insert
Intermec Technologies Corporation 2011B Radio in 700C, 751G, and CN2NI/CN2 CN2NI Compliance Insert
Contents
Compliance Insert 2
578-100-118 Revision A Page 1 of 3
*578-100-118A*
*578-100-118A*
Compliance Statement Insert
Device Name: Handheld Computer Model Number: CN2NI
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can result in
personal injury, fire, or battery explosion.
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the
equipment.
FCC Digital Emissions Compliance
This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant to Part 15 of the
FCC Rules, and it must not be used in a residential environment. It generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instruction manual, it may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the interference at
the user’s own expense.
Canadian Digital Apparatus Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model CN2
The Model CN2NI Handheld Computer has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are based
on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate or SAR. Tests for SAR are conducted using standardized
methods with the device transmitting at its highest certified power level.
While there may be differences between the SAR levels of various products, they are all designed to meet the relevant guidelines for exposure to the radio waves.
For residents of Canada and the United States and other countries/regions that have adopted the SAR limit recommended by Industry Canada RSS-102 and Federal
Communications Commission Office of Engineering and Technology (OET) Bulletin 65, which is 1.6W/kg averaged over one (1) gram of tissue for uncontrolled
general population exposure, the highest SAR value for the Model CN2NI Handheld Computer when worn on the body is 0.823 W/kg. The Model CN2NI Handheld
Computer has been tested and found to meet the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of
other accessories may not ensure compliance with FCC RF exposure guidelines.
578-100-118 Revision A Page 2 of 3
*578-100-118A*
*578-100-118A*
DECLARATION OF CONFORMITY
(According to ISO/IEC Guide 22 and EN 45014)
PAGE ONE OF ONE
THE PRODUCT HEREWITH COMPLIES WITH THE REQUIREMENTS OF :
THE LOW-VOLTAGE DIRECTIVE 73/23/EEC.
THE EMC DIRECTIVE 89/336/EEC.
THE R&TTE DIRECTIVE 1999/05/EC.
Manufacturer’s Name: European Representative:
Intermec Technologies Corporation Intermec International Incorporated
6001 36th Avenue West Sovereign House, Vastern Road
Everett, WA 98203 Reading, Berkshire
RG1 8BT England
Declares that the product listed below:
Product Type: ITE/Residential, Commercial, and Light Industrial
Product Name: CN2NI
Model Number: CN2NI Options: All
Beginning Serial Number: All Date Issued: January 5, 2005
Conforms to the following product specifications:
Safety: IEC 60950 / EN 60950
IEC 60825-1 / EN 60825-1
EMC: EN 55022 : 1998 / CISPR Publication 22 : 1997, Class A Limits and Methods
EN 55024 : 1998 (CISPR 24) Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement
EN 61000-4-2 : 1995 – Electrostatic Discharge
EN 61000-4-3 : 1995 – Radiated RF Field
EN 61000-4-4 : 1995 – Electrical Fast Transients
EN 61000-4-5 : 1995 – Voltage Surge
EN 61000-4-6 : 1996 – Conducted RF Field
EN 61000-4-8 : 1995 – Magnetic Field
EN 61000-4-11 : 1994 – Voltage Dips, Short Interruptions, and Variations
EN61000-3-2 : 1995 + A1 : 1998 + A2 : 1998 + A14 : 2000 – Harmonic Current Emissions
EN61000-3-3 : 1994 – Voltage Fluctuation and Flicker
ETSI EN 301 489-17
Radio: ETSI EN 300 328-2
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
Company Official: Michael Abel Position: Vice President
Signature: Signed Copy on File Date: _05-JAN-2005_______
European Contact: Intermec International Incorporated, Sovereign House, Vastern Road, Reading, Berkshire, RG1 8BT England;
Phone INT+44 118 987 9400; Fax INT+44 118 987 9401
578-100-118 Revision A Page 3 of 3
*578-100-118A*
*578-100-118A*
PROHLÁŠENÍ O DODRŽOVÁNÍ TECHNICKÝCH NAŘÍZENÍ
(V souladu se směrnicí 22 ISO/IEC a EN 45014)
STRÁNKA JEDNA Z JEDNÉ STRÁNKY
ZDE UVEDENÝ VÝROBEK SPLŇUJE POŽADAVKY:
SMĚRNICE 73/23/EEC PRO NÍZKONAPĚŤOVÁ ZAŘÍZENÍ
SMĚRNICE EMC 89/336/EEC
SMĚRNICE R&TTE 1999/05/EC
Jméno výrobce: Evropský zástupce:
Intermec Technologies Corporation Intermec International Incorporated
6001 36th Avenue West Sovereign House, Vastern Road
Everett, WA 98203, USA Reading, Berkshire
RG1 8BT England
prohlašuje, že níže uvedený výrobek:
Typ výrobku: Vybavení informační technologie/rezidenční, komerční a lehké průmyslové
Název výrobku: CN2NI
Číslo výrobku: CN2NI Varianty: Všechny
Počáteční sériové číslo: Všechna Datum vydání: 05. Leden 2005
Splňuje následující parametry výrobku:
Bezpečnostní: IEC 60950 / EN 60950
IEC 60825-1 / EN 60825-1
EMC: EN 55022 : 1998 / CISPR vyhláška 22: 1997, Limity a metody třídy A
EN 55024: 1998 (CISPR 24) Vybavení informační technologie – charakteristiky odolnosti –
Limity a metody měření
EN 61000-4-2 : 1995 – Elektrostatický výboj
EN 61000-4-3 : 1995 – Vyzařované vysokofrekvenční pole
EN 61000-4-4: 1995 – Rychlé přechodové elektrické jevy
EN 61000-4-5: 1995 – Napěťový ráz
EN 61000-4-6: 1996 – Vedené vysokofrekvenční pole
EN 61000-4-8: 1995 – Magnetické pole
EN 61000-4-11: 1994 – Krátkodobé poklesy napětí, krátká přerušení a pomalé změny napětí
EN61000-3-2: 1995 + A1: 1998 + A1: 1998 + A1: 2000 – Vyzařované harmonické proudy
EN61000-3-3: 1994 – Kolísání napětí a blikání
ETSI EN 301 489-17
Radio: ETSI EN 300 328-2
Já, níže podepsaný, tímto potvrzuji, že výše uvedené vybavení splňuje požadavky výše uvedených nařízení a
standardů.
Zástupce společnosti: Michael Abel Pozice: viceprezident
Podpis: Podepsaná kopie v evidenci Datum: 05. Leden 2005
Evropský kontakt: Intermec International Incorporated, Sovereign House, Vastern Road, Reading, Berkshire, RG1 8BT England;
Telefon: MEZIN. +44 118 987 9400; Fax MEZIN.+44 118 987 9401
Kontakt v České republice: Global AmeriTech Corporation, Rytířská 10, 110 00, Praha 1, Česká republika;
Telefon: MEZIN. +420-224 210 493; Fax MEZIN. +420-224 211 729