Intermec Technologies 2106 Access Point, 2106 User Manual 072215QSG1

Download:
Mirror Download [FCC.gov]
Document ID	225082
Application ID	aTm917PXvyP/bqUy2+waWg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	74.73kB (934066 bits)
Date Submitted	2002-02-06 00:00:00
Date Available	2002-02-06 00:00:00
Creation Date	2001-12-12 15:11:53
Producing Software	Adobe PDF library 4.800
Document Lastmod	2001-12-13 09:02:40
Document Title	072215QSG1.pdf
Document Creator	Adobe Illustrator 9.0.1

*072215-001*
*072215-001*
Part No. 072215-001
© 2001 Intermec Technologies Corp.
All Rights Reserved
6001 36th Avenue West
Everett, WA 98203-9280
MobileLAN™access 2106
For more information on using the 2106, please see:
• 21XX Universal Access Point Technical Reference Manual (Part No. 067150)
• Intermec Web Site at www.intermec.com
Physical
Dimensions
14.66 cm x 9.32 cm x 3.53 cm
(5.77 in x 3.67 in x 1.39 in)
Operating
Temperature
0°C to +40°C
(+32°F to +104°F)
Weight
205 g (0.45 lb)
Electrical rating
~100 to 240V
1.0 to 0.5A
50 to 60 Hz
072215-001
Specifications
Quick Start Guide
More Information
About the 2106
Safety First
CAUTION
CAUTION
Caution
You must use the appropriate Intermec power supply with this device
or equipment damage may occur.
Conseil
Vous devez utiliser la source d’alimentation Intermec adéquate avec cet
appareil sinon vous risquez d’endommager l’équipement.
Caution
Government regulatory agencies mandate that the antenna not be
alterable. Therefore, the access point uses a custom antenna connector.
Do not attempt to use a different antenna or you may damage the
connector and the access point.
Intermec’s 2106 access point is a wireless local area network (LAN)
product that lets your wireless end devices roam anywhere
throughout an enterprise while maintaining a continuous, high-quality
network connection.
Your 2106 has been certified with an IEEE 802.11a radio.
Conseil
Les agences responsables de la réglementation gouvernementale
exigent que l’antenne ne soit pas modifiable. Par conséquent, le point
d’accès est doté d’un connecteur d’antenne personnalisé. Ne pas
essayer d’utiliser une antenne différente au risque d’endommager le
connecteur et le point d’accès.
MobileLAN™access 2106 Quick Start Guide
Defining the LEDs, Ports, and Antenna Positions
90° Use this position
180°
Use this
position
when the
2106 is
mounted to
a wall.
when the 2106 is
mounted on a
desktop.
Use this position
when storing the
2106.
Power
After the 2106 boots, this LED remains steadily on.
Fit the slots on the back of the 2106
over the hooks on the mounting
bracket.
Plug the AC power
cord into an
AC power outlet.
Radio
This LED flashes when a frame is transmitted
or received on the Radio port.
Wired LAN
This LED flashes when a frame is
transmitted or received on the
Ethernet port.
0°
10/100 BaseT
Ethernet port
Connecting, Mounting, and Applying
Power to the 2106
Root/error
This LED flashes if this
access point is configured
as the root. It remains
steadily on if an error has
Power
occurred.
port
Screws fasten
into mounting
surface.
Mounting
screw (not
provided)
(2 places)
Plug the power
supply into the
power port of the
2106.
Power
Supply
Ethernet
connection
Setting an Initial IP Address
1. Install the MobileLAN access Utility by clicking Install Software from the enclosed CD and
following the instructions that appear on your screen. You can also install the software from
www.mobilelan.intermec.com.
Enter the IP address
of the access point.
2. Reboot the access point and configure parameters A through C in the MobileLAN access
Utility main screen.
Note: You must configure parameters A through C within 60 seconds after the
access point has started. In addition, if the access point you are setting is connected
wirelessly, you must have an active radio connection.
Enter the MAC
address of the access
point (located on the
bottom of the access
point).
Your PC must also be on the same Ethernet segment and subnet as the
access point.
Click Set AP.
Click Configure AP to
use the Web browser
interface to continue
configuring the
access point.
Congratulations!
Your 2106 is now ready to begin transmitting data packets between your end
devices and your wired network.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:12:12 15:11:53-08:00
Creator                         : Adobe Illustrator 9.0.1
Producer                        : Adobe PDF library 4.800
Title                           : 072215QSG1.pdf
Modify Date                     : 2001:12:13 09:02:40-08:00
For                             : John  P Bickley, Intermec Technologies Corp.
Bounding Box                    : -351 82 882 774
Creator Version                 : 9
Container Version               : 9
Page Count                      : 2

EXIF Metadata provided by EXIF.tools