Intermec Technologies BTM311 BTM311 User Manual 1
Intermec Technologies Corporation BTM311 1
Contents
User Manual Supplement
PRELIMINARY DRAFT P/N 074476-001
Note: You only need to read this information if your
Intermec product has a Bluetooth™ compatible module
from Actiontec® Electronics.
Important BTM311 Bluetooth Radio
Information!
Contents
For Users in the United States and Canada.................................................. 2
For Users Outside of the United States and Canada..................................... 3
Pour les utilisateurs en dehors du Canada et des Etats-unis .......................... 5
Für Benutzer außerhalb von Kanada und den Vereinigten Staaten............... 6
Per gli utenti al di fuori del Canada o degli Stati Uniti................................. 7
Para Usuarios Fuera de Canada o de los Estados Unidos.............................. 8
Para Usuários Fora do Canadá ou dos Estados Unidos................................. 9
..................................................... 9
For Users in the United States and Canada
Place this supplement in your manual.
This device complies with Part 15 of the FCC rules and with RSS-210
of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that can cause undesired operation.
Federal Communications Commission Compliance
FCC Digital Emissions Compliance: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and
receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for
help.
Changes or modifications not expressly approved by
Intermec could void the user’s authority to operate this
equipment.
2 PRELIMINARY DRAFT
This radio meets the FCC RF exposure guidelines
when used with the Intermec accessories supplied or
designated for this product. Use of other accessories
may not ensure compliance with the FCC RF exposure
guidelines.
Specific Absorption Rate, or SAR, is a measurement of
radio frequency energy. This radio is categorically
exempt from routine SAR evaluation. The FCC
excludes radios from routine SAR evaluation if the
maximum peak power is less than 24.5 mW. The
maximum peak power for this radio, as measured using
corresponding FCC requirements, is 13.8 mW.
Use of any other transmitting devices within 20 cm
(8 in) of this radio could void the user’s authority to
operate this equipment.
For Users Outside of the United States and Canada
Place this supplement in your manual.
The Intermec product you purchased transmits and receives data
using a 2.4 GHz Frequency Hopping Spread Spectrum system.
Programming and configuration information for the transceivers is
also provided in the host device documentation. Please check the
Intermec web site for additional documentation at
www.intermec.com.
Hereby, Intermec Technologies Corporation declares that this
Bluetooth module is in compliance with the essential requirements
and other relevant provisions of R&TTE Directive (1999/5/EC). This
product has been assessed to the following standards:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950:1992 (incl. Amdt. 1-4, 11)
PRELIMINARY DRAFT 3
The transmitter module’s output power is 13.8 mW. The products
using this module are intended for business and industrial
environments. They should not be used in residential environments
and by children.
0981
This product is marked with this logo and uses
radio frequency bands that are harmonized
throughout the European Community.
The following table indicates the areas of intended use of the
equipment and any known restrictions.
Country of License
Intended Use Yes No Required Restrictions Details
Austria X
Belgium X
Cyprus X
Czech Republic X
Denmark X
Estonia X
Finland X
France X
Germany X
Greece X
Hungary X
Ireland X
Italy X
Lithuania X
Latvia X
Luxembourg X
Malta X
The
Netherlands
X
Poland X
Portugal X
Slovakia X
Slovenia X
Spain X
Sweden X
United
Kingdom
X
4 PRELIMINARY DRAFT
Country of License
Intended Use Yes No Required Restrictions Details
Other non-EU:
China X
Iceland X
Liechtenstein X
Norway X
Switzerland X
Japan X
Additional EMI/RFI Compliance
This device meets the Class B limit requirements of CISPR 22.
Pour les utilisateurs en dehors du Canada et des Etats-unis
Veuillez placer ce supplément dans votre manuel.
Le produit Intermec que vous avez acheté peut transmettre et recevoir
des données à l’aide d’un système d’étalement du spectre en bond de
fréquence de 2,4 GHz.
Les informations de programmation et de configuration pour les
émetteurs-récepteurs sont également fournies dans la documentation
de l’appareil hôte. Pour obtenir toute documentation supplémentaire,
veuillez consulter le site web d’Intermec, à l’adresse
www.intermec.com.
Par la présente, Intermec Technologies Corporation déclare que ce
Bluetooth radio est conforme aux exigences de base et autres exigences
pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a été
évalué par rapport aux normes suivantes:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950:1992 (comprenant l’amendement 1-4, 11)
La puissance de sortie du module émetteur-récepteur est de 13.8 mW.
Les produits utilisant ce module sont destinés à des environnements
commerciaux et industriels. Ils ne doivent pas être utilisés dans des
environnements résidentiels et par des enfants.
PRELIMINARY DRAFT 5
0981
Ce produit porte ce logo et utilise des
bandes RF qui sont harmonisées à travers
l’Union Européenne.
Le tableau suivant répertorie les zones d’utilisation prévues pour
l’équipement et les restrictions connues.
Pays d’utilisation Licence
prévu Oui Non requise Restrictions Détails
Belgique X
France X
Conformité additionnelle à la norme EMI/RFI
Cet appareil respecte les limites imposées pour la Classe B par le
CISPR 22.
Für Benutzer außerhalb von Kanada und den Vereinigten
Staaten
Legen Sie diese Ergänzung in Ihr Handbuch.
Das Intermec-Produkt, das Sie gekauft haben, sendet und empfängt
Daten mit Hilfe eines 2,4-GHz-Frequenzsprung-
Spreizspektrumsystems.
Dieses Produkt übermittelt elektromagnetische Wellen in einem
Frequenzbereich von 2,4 GHz. Es wurde getestet und in
Übereinstimmung mit U.S. (OET Anleitung 65) und kanadischen
(RSS 102) RF-Bestrahlungsvorschriften befunden. Zur Zeit gibt es in
der EU keine Richtlinien, die diesen Produkttyp abdecken.
In der Dokumentation des Hostgerätes finden Sie außerdem
Informationen zum Programmieren und Konfigurieren der Sende-
Empfangs-Geräte. Weitere Hinweise erhalten Sie auf der Intermec-
Website unter www.intermec.com.
Hiermit erklärt Intermec Technologies Corporation, dass das
Bluetooth Radio mit den wesentlichen Anforderungen und anderen
sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC)
übereinstimmt. Dieses Produkt wurde gemäß der folgenden Normen
bewertet:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
6 PRELIMINARY DRAFT
• EN 60950:1992 (einschl. Amdt. 1-4, 11)
Die Ausgangsleistung des Sende-Empfangs-Moduls beträgt 13.8 mW.
Die Produkte, die dieses Modul verwenden, sind für geschäftliche und
industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden
und in der Nähe von Kindern verwendet werden.
0981
Das Produkt ist mit diesem Markenzeichen
versehen und verwendet
Radiofrequenzbreiten, die in der
Europäischen Gemeinschaft überall
aufeinander abgestimmt sind.
Zusätzliche Elektromagnetische Störung-Übereinstimmung
Dieses Gerät entspricht den Grenzbestimmungen der Klasse B von
CISPR 22.
Per gli utenti al di fuori del Canada o degli Stati Uniti
Si prega di collocare questo supplemento nel manuale per la
configurazione senza la radio.
Il prodotto Intermec che avete acquistato trasmette e riceve i dati
tramite un sistema a 2,4 GHz che utilizza la tecnologia FHSS (salto di
frequenze, spettro esteso).
La documentazione del dispositivo host fornisce inoltre le
informazioni sulla programmazione e la configurazione dei transceiver.
Per altre informazioni, consultate il sito web Intermec all’indirizzo
www.intermec.com.
Con la presente Intermec Technologies Corporation dichiara che
questo Bluetooth radio è conforme ai requisiti essenziali e alle altre
clausole importanti della direttiva R&TTE (1999/5/EC). Questo
prodotto è stato valutato in base ai seguenti standard:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950:1992 (incluso Amdt. 1-4, 11)
La potenza di uscita del modulo trasmittente è di 13.8 mW. I prodotti
che utilizzano questo modulo sono destinati ad ambienti industriali e
commerciali e non debbono essere utilizzati in ambienti residenziali e
dai bambini.
PRELIMINARY DRAFT 7
0981
Questo prodotto reca il presente logo e
utilizza bande di radiofrequenza armonizzate
nell’ambito della Comunità Europea.
Ulteriore conformità con EMI/RFI
Questo dispositivo è conforme ai limiti stabiliti in CISPR 22 per la
Classe B.
Para Usuarios Fuera de Canada o de los Estados Unidos
Por favor, coloque este suplemento dentro de su manual.
Este producto de Intermec transmite y recibe datos por medio de un
sistema de espectro ensanchado en lupulización de frecuencia de 2,4
GHz.
Para obtener información sobre la configuración y programación del
transceptor, consulte la documentación provista con el dispositivo
“host”. Para obtener documentación adicional, visite el sitio web de
Intermec: www.intermec.com.
Por la presente, Intermec Technologies Corporation declara que el
Bluetooth radio cumple con los requisitos esenciales de acuerdo con la
directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de
acuerdo con los siguientes estándares o normas:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950:1992 (incl. Enmienda 1-4, 11)
La potencia de salida del módulo transmisor es de 13.8 mW. Los
productos que usan este módulo están destinados para uso en
ambientes comerciales e industriales. No deben ser usados en
ambientes residenciales o en la proximidad de niños.
0981
Este producto está marcado con este
logotipo y utiliza bandas de radiofrecuencia
armonizadas en toda la Comunidad
Europea.
Conformidad adicional con EMI/RFI
Este dispositivo cumple con los límites requeridos para la Clase B de
CISPR 22.
8 PRELIMINARY DRAFT
Para Usuários Fora do Canadá ou dos Estados Unidos
Coloque este suplemento no seu manual.
O produto Intermec que você comprou transmite e recebe dados
usando um sistema FHSS (Espectro de Difusão de Seqüência
Hopping) de 2,4 GHz .
As informações sobre programação e configuração dos transceptores
também são fornecidas na documentação do dispositivo hospedeiro.
Consulte também o site da Intermec na web, no endereço
www.intermec.com, para documentação complementar.
Por este documento, a Intermec Technologies Corporation declara
que o Bluetooth radio atende aos requisitos essenciais e outras
condições relevantes da Diretiva R&TTE (1999/5/EC). Esse produto
foi avaliado em relação aos seguintes padrões:
• ETSI EN 300 328-2 v1.2.1 (2001-12)
• ETSI EN 301 489-17 v1.2.1 (2002-08)
• EN 60950:1992 (incluída Amdt. 1-4, 11)
A potência de saída do módulo transmissor é de 13.8 mW. Os
produtos que usam este módulo são destinados aos ambientes
comerciais e industriais. Eles não devem ser utilizados em ambientes
residenciais e por crianças.
0981
Este produto é identificado por esta
logomarca e utiliza bandas de freqüência de
rádio que estão harmonizadas na Comunidade
Européia.
Conformidades EMI/RFI Adicionais
Este produto atende aos requisitos de limite Classe B do CISPR22.
PRELIMINARY DRAFT 9
•
ETSI EN 300 328-2 v1.2.1 (2001-12)
•
ETSI EN 301 489-17 v1.2.1 (2002-08)
•
13.8
0981
10 PRELIMINARY DRAFT
PRELIMINARY DRAFT 11
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2004 Intermec Technologies
Corporation. All rights reserved.
Important BTM311 Bluetooth Radio Information!
*074476-001*
P/N 074476-001