Intermec Technologies BTS080 8520-00080 radio in 700C User Manual 578 100 083J
Intermec Technologies Corporation 8520-00080 radio in 700C 578 100 083J
Contents
Compliance Insert
578-100-083 Revision J Page 1 of 3
*578-100-083J*
*578-100-083J*
Compliance Statement Insert
Device Name: Pen Notepad Computer Model Number: Model 700C (740/741, 750/751, & 760/761 Configurations)
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can result in
personal injury, fire, or battery explosion.
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved
by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate
the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model 700C Configurations Used with the Optional IP3 RFID Tag Reader
When installing and using the Intermec IP3 scan handle RFID tag reader on the 700C, a 20-cm (8-inch) passing distance must be maintained from any body part of
the user or nearby persons and the tag reader. The antenna must not be touched during transmitter operation.
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model 700C Configurations with GSM/GPRS Radio
The Model 700C Pen Notepad computer has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are
based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate or SAR. Tests for SAR are conducted using
standardized methods with the device transmitting at its highest certified power level.
While there may be differences between the SAR levels of various products, they are all designed to meet the relevant guidelines for exposure to the radio waves.
For residents of the European Union and other countries/regions that have adopted the International Commission on Non-Ionizing Radiation Protection (ICNIRP)
SAR limit of 2W/Kg averaged over 10 grams of tissue for uncontrolled general population exposure, the highest SAR value for the Model 700C Pen Notepad
computer, as tested by Compliance Certification Services, for use at the ear is 0.266W/Kg (10g) and 0.460W/kg (10g) for body worn.
For residents of Canada and the United States and other countries/regions that have adopted the SAR limit recommended by Industry Canada RSS-102 and Federal
Communications Commission Office of Engineering and Technology (OET) Bulletin 65, which is 1.6W/kg averaged over one (1) gram of tissue for uncontrolled
general population exposure, the highest SAR value for the Model 700C Pen Notepad computer, as tested by Compliance Certification Services, for use at the ear is
0.375W/kg.
For body worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The highest SAR value for the Model 700C Pen Notepad
computer, as tested by Compliance Certification Services, when worn on the body is 0.689 W/kg."
578-100-083 Revision J Page 2 of 3
*578-100-083J*
*578-100-083J*
Compliance Statement Insert
Device Name: Pen Notepad Computer Model Number: Model 700C (740, 750, & 760 Configurations)
The responsible party for the compliance of this device is: Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model 700C Configurations with CDMA Radio
The Model 700C Pen Notepad computer has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are
based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate or SAR. Tests for SAR are conducted using
standardized methods with the device transmitting at its highest certified power level.
While there may be differences between the SAR levels of various products, they are all designed to meet the relevant guidelines for exposure to the radio waves.
For residents of Canada and the United States and other countries/regions that have adopted the SAR limit recommended by Industry Canada RSS-102 and Federal
Communications Commission Office of Engineering and Technology (OET) Bulletin 65, which is 1.6W/Kg averaged over one (1) gram of tissue for uncontrolled
general population exposure, the highest SAR value for the Model 700C Pen Notepad computer, as tested by Celltech Lab Inc., for use at the ear is 1.47W/kg.
For body worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for
this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The highest SAR value for the Model 700C Pen Notepad
computer, as tested by Celltech Lab Inc., when worn on the body is 1.0 W/kg.
Laser Compliance and Precaution
The 700C is registered with the CDRH as a Class II Laser Product (CFR 21 Subpart J). This product has a maximum output of
1.0 mW at 630-680 nm.
Warning
There are no user serviceable parts inside the 700C. Use of controls or adjustments, or performance of procedures other
than those specified herein, may result in hazardous laser light exposure of up to 1 mW at 630-680 nm.
Avertissement
Aucune des pièces internes du modèle 700C ne peut être réparée par l’utilisateur.
L’utilisation d’appareils de contrôle et ajustement ainsi que l’exécution de procédures d’utilisation autres que celles qui
sont indiquées dans la présente publication peuvent entraîner une exposition dangereuse à la lumière laser pouvant
atteindre jusqu’à 1 mW à 630-680 nm.
Note: There are no controls or adjustments provided for routine operation or maintenance of the 700C.
Remarque: Aucun appareil de contrôle ou d’ajustement n’est fourni pour les opérations de routine ou de maintenance de
l’appareil 700C.
The label shown below is attached on the underside of the 700C devices containing a laser scanner.
578-100-083 Revision J Page 3 of 3
*578-100-083J*
*578-100-083J*
DECLARATION OF CONFORMITY
(According to ISO/IEC Guide 22 and EN 45014)
PAGE ONE OF ONE
THE PRODUCT HEREWITH COMPLIES WITH THE REQUIREMENTS OF :
THE LOW-VOLTAGE DIRECTIVE 73/23/EEC.
THE EMC DIRECTIVE 89/336/EEC.
THE R&TTE DIRECTIVE 1999/05/EC.
Manufacturer’s Name: European Representative:
Intermec Technologies Corporation Intermec International Incorporated
6001 36th Avenue West Sovereign House, Vastern Road
Everett, WA 98203 Reading, Berkshire
RG1 8BT England
Declares that the product listed below:
Product Type: ITE/Residential, Commercial, and Light Industrial
Product Name: Model 700C
Model Number: Model 700C Options: All
Beginning Serial Number: All Date Issued: April 21, 2005
Conforms to the following product specifications:
Safety: IEC 950 / EN 60950
EMC: EN 55022 : 1998 / CISPR Publication 22 : 1997, Class B Limits and Methods
EN 55024 : 1998 (CISPR 24) Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement
EN 61000-4-2 : 1995 – Electrostatic Discharge
EN 61000-4-3 : 1995 – Radiated RF Field
EN 61000-4-4 : 1995 – Electrical Fast Transients
EN 61000-4-5 : 1995 – Voltage Surge
EN 61000-4-6 : 1996 – Conducted RF Field
EN 61000-4-8 : 1995 – Magnetic Field
EN 61000-4-11 : 1994 – Voltage Dips, Short Interruptions, and Variations
EN61000-3-2 : 1995 + A1 : 1998 + A2 : 1998 + A14 : 2000 – Harmonic Current Emissions
EN61000-3-3 : 1994 – Voltage Fluctuation and Flicker
Radio: ETSI EN 300 328
ETSI 3GPP TS 51.010-1
Laser: IEC 60825-1 / EN 60825-1 – Class 2 (630-680 nm 1.0W)
Linear Imager: IEC 60825-1 / EN 60825-1 – Class 1 LED Product
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
Company Official: Michael Abel Position: Vice President
Signature: Signed Copy on File Date: April 21, 2005
European Contact: Intermec International Incorporated, Sovereign House, Vastern Road, Reading, Berkshire, RG1 8BT England;
Phone INT+44 118 987 9400; Fax INT+44 118 987 9401
Czech Republic Contact: Global AmeriTech Corporation, Rytirska 10, 110 00, Prague 1, Czech Republic;
Phone INT+420-224 210 493; Fax INT+420-224 211 729