Intermec Technologies CWAN-RIM902 RADIO MODEM MODULE User Manual compliance insert

Intermec Technologies Corporation RADIO MODEM MODULE compliance insert

compliance insert

Norand Mobile Systems Division, EMC Test Lab FCC ID: EHACWAN-RIM902DOC. NO.: 577-500-914 REPORT NO: 990824-1RIM Radio Module FCC SAR Page 1 of 2APPENDIX E, Declaration of Conformity InsertTechnologies CorporationNorand Mobile Systems DivisionEMC Test LaboratoryMEASUREMENT/TECHNICAL REPORTIntermec Technologies CorporationCellular Radio ModuleOEM From RIM 902REPORT NO: 990824-1DATE: August 24 , 1999APPENDIX EDECLARATION OF CONFORMITY INSERT, USER INFORMATION
Norand Mobile Systems Division, EMC Test Lab FCC ID: EHACWAN-RIM902DOC. NO.: 577-500-914 REPORT NO: 990824-1RIM Radio Module FCC SAR Page 2 of 2APPENDIX E, Declaration of Conformity InsertCompliance Statement InsertDevice Name: Hand-held Computer Model Number: 6600The responsible party for the compliance of this device is: Intermec Technologies Corporation550 Second Street SECedar Rapids, Iowa 52401 USA(319) 369-3100CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions canresult in personal injury, fire, or battery explosion.This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripheralsapproved by Intermec Technologies Corporation. The use of accessories other than those recommended or changes to thisproduct that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result inthe loss of the users authority to operate the equipment.WARNING: Per the FCC RF exposure requirements, the user shall not touch the antenna while the transceiver is in use.FCC Digital Emissions ComplianceThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or moreof the following measures:• Reorient or relocate the radio of television receiving antenna.• Increase the separation between the computer equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.• Consult the dealer or an experienced radio television technician for help.Canadian Digital Apparatus ComplianceThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.Telephone Installation Warning NoticesThe following notices apply to equipment that may be connected to telephone lines or systems. For your personal safety, and to protect this equipmentfrom potential electrical or physical damage, do NOT connect equipment to telephone lines or data communication equipment unless the followingwarnings have been read, understood, and complied with.• Never install telephone wiring during a lightning storm.• Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.• Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.• Use caution when installing or modifying telephone lines.• Avoid using telephone (other than cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.• Do not use the telephone to report a gas leak in the vicinity of the leak.Installation do téléphone : avertissementsLes avertissements qui suivent s'appliquent à tout équipement qui peut être branché aux lignes ou systemes téléphoniques. Pour votre sécuritépersonnelle et pour protéger l'équipement de tout dommage électrique ou physique potentiel, NE PAS brancher un ordinateur tablette électronique ou sespériphériques aux lignes téléphoniques ou équipements avant que les avertissements suivants aient été lus, compris et observés:• Ne jamais installer de câblage téléphonique pendant un orage électrique.• Ne jamais installer de prise téléphonique dans un endroit humide à moins que la prise ait été spécifiquement conçue pour être utilisée dans lesendroits humides.• Ne jamais toucher les fils de téléphone ou de l'équipement terminal non isolés à moins que la ligne téléphonique n'ait été débranchée del'interface réseau.

Navigation menu