Intermec Technologies IM4 IM4 User Manual 934 018 006
Intermec Technologies Corporation IM4 934 018 006
Contents
User Guide
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1311489 |
| Application ID | 3mzJApRDthXaYH7SqbkhQg== |
| Document Description | User Guide |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 240.72kB (3009061 bits) |
| Date Submitted | 2010-07-14 00:00:00 |
| Date Available | 2010-07-14 00:00:00 |
| Creation Date | 2010-05-06 10:12:04 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2010-05-06 10:30:05 |
| Document Title | 934-018-006.book |
| Document Creator | FrameMaker 8.0 |
| Document Author: | kvu |
IP30 Handheld RFID Reader IP30, IP30NI User’s Guide Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2008-2010 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. ii IP30 Handheld RFID Reader User’s Guide Document Change Record This page records changes to this document. The document was originally released as Revision 001. Version Number Date Description of Change 006 4/2010 This document was revised to include: • new operating temperature specifications. • new CN4NI and CK61 information. 005 6/2009 Revised specifications for new read and write ranges. 004 2/2009 Revised specifications for new 865 MHz EU standard. 003 8/2008 Revised to support the CK3 Mobile Computer. 002 4/2008 Revised to include correct part numbers for the CK61 power supply. IP30 Handheld RFID Reader User’s Guide iii IP30 Handheld RFID Reader User’s Guide iv Contents Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Service Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix 1 Getting Started .......................................................... 1 Introducing the IP30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking the IP30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Learning About the IP30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Understanding the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About the Intermec Ready-to-Work Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Understanding the Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Charging and Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Attaching the IP30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Attaching the IP30 to the CN3B or CN3F Mobile Computer. . . . . . . . . . . . . . . . . . 9 Attaching the IP30 to the CN4 Series Mobile Computer . . . . . . . . . . . . . . . . . . . . . 11 Attaching the IP30 to the CK3 Series Mobile Computer . . . . . . . . . . . . . . . . . . . . . 15 Attaching the IP30 to the CK61 Series Mobile Computer . . . . . . . . . . . . . . . . . . . . 18 Establishing a Connection With the IP30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2 Creating and Using RFID Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 RFID Applications and the IP30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Using the RFID Resource Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Creating Applications for the IP30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Configuring RFID Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 IP30 Handheld RFID Reader User’s Guide Configuring the BRI Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3 Upgrading and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Upgrading the IP30 Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Upgrading the IP30 Firmware Using a Media Card . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Upgrading the IP30 Using SmartSystems Foundation. . . . . . . . . . . . . . . . . . . . . . . 31 Calling Intermec Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Troubleshooting the IP30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Problems While Working With RFID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Problems With Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 IP30 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 RFID Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Port Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Serial Port (COM1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Adapter Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 IP30 Handheld RFID Reader User’s Guide vi Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information This section explains how to identify notes that are in this document. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Support > Returns and Repairs > Warranty. Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided “as is with all faults.” All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose. Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product. Telephone Support In the U.S.A. and Canada, call 1-800-755-5505. vii IP30 Handheld RFID Reader User’s Guide Before You Begin Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click About Us > Contact Us. Service Location Support For the most current listing of service locations, go to www.intermec.com and click Support >Returns and Repairs > Repair Locations. For technical support in South Korea, use the after service locations listed below: AWOO Systems 102-1304 SK Ventium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 E-mail: mjyun@awoo.co.kr IN Information System PTD LTD 6th Floor Daegu Venture Center Bldg 95 Shinchun 3 Dong Donggu, Daegu City, Korea E-mail: jmyou@idif.co.kr or korlim@gw.idif.co.kr Who Should Read This Manual This document is for the person who is responsible for installing, configuring, and maintaining the IP30. This document provides you with information about the features of the IP30, and how to install, configure, operate, maintain, and troubleshoot it. IP30 Handheld RFID Reader User’s Guide viii Before You Begin Related Documents Here are some related Intermec documents that you might find useful: • Basic Reader Interface Programmer’s Reference Manual • Intermec Computer Command Reference Manual The Intermec web site at www.intermec.com contains our documents (as .pdf files) that you can download for free. To download documents 1 Visit the Intermec web site at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page. For example, to find the CN3 computer product page, click Computers > Handheld Computers > CN3. 4 Click the Manuals tab. 5 If your product does not have its own product page, click Support > Manuals. Use the Product Category field, the Product Family field, and the Product field to help you locate the documentation for your product. Patent Information Product is covered by one or more of the following patents: 4864158, 4888591, 4999636, 5030807, 5055659, 5280159, 5504485, 5521601, 5550547, 5673037, 5763867, 5777561, 5825045, 5828318, 5828693, 5850181, 5850187, 5942987, 5995019, 6078251, 6121878, 6122329, 6172596, 6195053, 6249227, 6280544, 6286762, 6286763, 6288629, 6360208, 6384712, 6404325, 6429775, 6486769, 6501807, 6525648, 6639509, 6645327, 6677852, 6768414, 6784789, 6816063, 6919793, 7039359, 7103087, 7117374, 7121467, 7158046, 7207486, 7298268 There may be other U.S. and foreign patents pending. ix IP30 Handheld RFID Reader User’s Guide Before You Begin IP30 Handheld RFID Reader User’s Guide 1 Getting Started Use this chapter to familiarize yourself with the IP30 Portable RFID Reader. This chapter covers these topics: • Introducing the IP30 • Learning About the IP30 • Using the Battery • Attaching the IP30 • Establishing a Connection With the IP30 Chapter 1 — Getting Started Introducing the IP30 The IP30 allows you to connect via Bluetooth or USB. Together, the IP30 and your mobile computer provide a high-performance mobile RFID solution that allows you to bring the read/write device to the tagged product rather than moving tagged products past a fixed reader. The IP30 supports the following mobile computers: • CN3B and CN3F Mobile Computers. CN3 WAN configurations are not supported with the IP30. • CN4 Series Mobile Computer. • CK3 Series Mobile Computer. • CK61 and CK61ex Series Mobile Computers. Note: When paired with CN4NI and CN4ENI products, the IP30 supports North America NI, Division 2, Class I, II and III as defined in ANSI/ISA 12.12.01 for operation in environments where flammable and explosive gases and vapors may be present. The Bluetooth Version of the IP30 Attached to the CN3 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started Unpacking the IP30 When you unpack the IP30, these items are included: • IP30 RFID Handle • Product documentation • Mounting plates (for CK3 and CK61 Series Mobile Computers only) What You Need To use the IP30, you need these items: • Battery (Model AB3 or AB19) • Battery charger or dock with power supply • CN3B, CN3F, CN4, CK3, or CK61 Series Mobile Computer • A custom application to read and write tags. For help, see “RFID Applications and the IP30” on page 26. You may also need to upgrade your Windows operating system and SmartSystems Platform Bundle (SSPB) before you can connect the IP30 to your mobile computer. Microsoft Windows Mobile and SmartSystems Platform Bundle Versions Needed Mobile Computer Windows Mobile Version SmartSystems Platform Bundle Version CK3 Windows Mobile 6.1 or later. SSPB version 6.20 or later. • • CN3B, CN3F • • CK61 Windows Mobile 5.0 version 3.21 or later. Windows CE version 5.0 or later. SSPB version 5.50 or later. Windows Mobile 5.0 version 3.21 or later. Windows Mobile 6.1 version 4.41.32 or later. • SSPB version 5.50 or later for Windows Mobile 5.0. • SSPB version 7.00.36 or later for Windows Mobile 6.1. CN4 Windows Mobile 6.1 version 4.41.32 or later. SSPB version 7.00.36 or later. For more information on how to upgrade your Windows operating system and SmartSystems Platform Bundle (SSPB), see your mobile computer user’s manual. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started Learning About the IP30 This section explains the LEDs and ports on the IP30. Understanding the LEDs The IP30 has five LEDs that show you the operating status of the reader. LED Icon Descriptions LED Icon LED Name Intermec Ready-to WorkTM indicator Description Blue LED remains on when an the IP30 is connected to the mobile computer. For more information, see the next section. Data Communications Flashes when there is data communications between the reader and the mobile computer. RFID Transmit Flashes when the IP30 RFID reader is transmitting data. Tag ID Flashes when an RFID tag ID is successfully read or written to. Battery This LED indicates the status of the battery: • Green: The battery is fully charged (more than 80% capacity). • Orange: The battery is charged (from 20% to 80% capacity). • Red: The battery is low (less than 20% capacity). IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started About the Intermec Ready-to-Work Indicator The blue Ready-to-WorkTM indicator shows when a connection is established between your mobile computer and IP30. The next table explains the different states of the Ready-to-Work indicator. Ready-To-Work Indicator Descriptions LED Description Off The IP30 is not yet ready for operation, or the IP30 is in low power mode. Blinking The IP30 is not associated with or connected to the mobile computer. Steady A connection has been established between the IP30 and the mobile computer. The IP30 enters low power mode if there is no host activity after 5 minutes. The IP30 will remain Ready-to-Work as long as the mobile computer maintains a a communications link. To determine if the IP30 is ready to work, pull the trigger. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started Understanding the Ports The USB version of the IP30 for the CK61 has two ports located on the IP30 adapter. To access these ports, you must remove the port cover. To remove the port cover • On the bottom of the IP30 adapter, remove the port cover by pulling it away from the right side of the IP30. Power port COM 1 IP30 USB Adapter Port Descriptions Port Description Power Connect a power supply to the CK61 to power and charge the CK61. Use power supply P/N 851-065-005. For North America use power supply P/N 851-065-105. Note that this does not charge the IP30. To charge the IP30 battery see the next section. COM 1 Connect other RS-232 devices such as printers to the CK61. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started Using the Battery The IP30 uses the Model AB3 and Model AB19 batteries as a main power source. You must use the Model AB19 (P/N 318-037-001) battery for NI environments where flammable and explosive gases and vapors may be present. The battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it, above 100C (212F), or incinerate it. Disposed of used batteries promptly. Keep away from children. Contact your Intermec representative for replacement batteries. Charging and Installing the Battery To charge the IP30 battery you need to have a power supply (P/N 851-082-103), a country specific power cord, and one of these chargers or accessories: • AC6 2-Bay Charger (P/N 852-907-001) • AC7 4-Bay Charger (P/N 852-908-001) • AC20 Quad Charger with IP30 Battery Pack Adapter (P/N 871-233-001) • AD20 Single Charger with IP30 Battery Pack Adapter (P/N 871-233-001) The IP30 does not ship with any of these accessories. For more information on these accessories, contact your local Intermec sales representative. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started To charge the IP30 battery • Insert the battery into a slot on the battery charger. A fully discharged battery charges to full capacity in approximately 4 hours. 10 11 12 1 6 5 To install the battery 1 Insert the battery into the IP30. Battery release button 2 Once the battery is in the IP30, push the battery release button and slide the battery in until the battery is secure. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started To remove the battery • Push the battery release button on the bottom of the IP30 battery to remove it. Note: Charging the IP30 battery does not charge the mobile computer that it is connected to. See the mobile computer user’s manual for charging options. Attaching the IP30 You can connect the IP30 using a Bluetooth connection, a USB connection, or a USB connection connected to a common access card reader. The IP30 can connect to the following mobile computers: • CN3B, and CN3F Mobile Computers • CN4 Series Mobile Computers • CK3 Series Mobile Computers • CK61 Series Mobile Computers The next sections describe how to connect the IP30 to your mobile computer. Attaching the IP30 to the CN3B or CN3F Mobile Computer This section explains how to connect the IP30 to the CN3 using a Bluetooth connection, a USB connection, or a USB connection connected to the Model AR6 Common Access Card Reader. To attach the IP30 to the CN3 1 Remove the CN3 handstrap and insert it into the IP30 handle. IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started 2 Insert the CN3 into the IP30. 3 Lock the CN3 into place by lowering it into the IP30 locking bracket. 4 If you are using the Bluetooth version of the IP30, go to “Establishing a Connection With the IP30” on page 22. Otherwise, continue to the next step. If you are using the USB version of the IP30, insert the IP30 USB adapter into the docking connector until it snaps into place. 10 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started 5 Configure the IP30. For help, see “Configuring RFID Settings” on page 27. Attaching the IP30 to the CN4 Series Mobile Computer This section explains how to connect the IP30 to the CN4 using a Bluetooth connection, a USB connection, or a USB connection connected to the Model AR6 Common Access Card Reader. To attach the IP30 to the CN4 1 Remove the CN4 handstrap and insert it into the IP30 handle. IP30 Handheld RFID Reader User’s Guide 11 Chapter 1 — Getting Started 2 Insert the CN4 into the IP30. 3 Lock the CN4 into place by lowering it into the IP30 locking bracket. 4 If you are using the Bluetooth version of the IP30, go to “Establishing a Connection With the IP30” on page 22. Otherwise, continue to the next step. 5 Connect the USB adapter or the Model AR6 Common Access Card Reader to the IP30. If you are using the USB version of the IP30: a Insert the IP30 USB adapter into the docking connector until it snaps into place. 12 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started b Configure the IP30. For help, see “Configuring RFID Settings” on page 27. If the USB adapter has captive screws: a Remove the side fasteners from the CN4 by unscrewing the two screws located on the bottom of the CN4. Screw (2 places) b Insert the USB adapter and secure it by screwing in the two captive screws. IP30 Handheld RFID Reader User’s Guide 13 Chapter 1 — Getting Started If you are using the AR6 Common Access Card Reader: a Insert the AR6 into the docking connector until it snaps into place. b Insert the right-angle USB cable into the USB port located on the bottom of the AR6. Wrap the VelcroTM strap around the AR6 to secure the USB cable. d Configure the IP30. For help, see “Configuring RFID Settings” on page 27. 14 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started Attaching the IP30 to the CK3 Series Mobile Computer This section explains how to attach the Bluetooth and USB version of the IP30 to your CK3. To attach the IP30 to the CK3 1 Remove the CK3 handstrap by removing the Phillips head screw. 2 Attach the mounting plate onto the CK3 by using the Phillips head screw provided with your IP30. Turn the screw clockwise to secure it onto the mobile computer. IP30 Handheld RFID Reader User’s Guide 15 Chapter 1 — Getting Started 3 Lock the CK3 into place by lowering it into the IP30’s locking bracket. 4 If you are using the Bluetooth version of the IP30, go to “Establishing a Connection With the IP30” on page 22 to establish a connection between your mobile computer and the IP30. 5 Connect the USB adapter or the Model AR6 Common Access Card Reader to the IP30. If you are using the USB version of the IP30: a Insert the IP30 USB adapter into the docking connector until it snaps into place. 16 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started b Configure the IP30. For help, see “Configuring RFID Settings” on page 27. If you are using the AR7 Common Access Card Reader: a Insert the AR7 into the docking connector until it snaps into place. b Insert the right-angle USB cable into the USB port located on the bottom of the AR7. Wrap the VelcroTM strap around the AR7 to secure the USB cable. 6 Configure the IP30. For help, see “Configuring RFID Settings” on page 27. IP30 Handheld RFID Reader User’s Guide 17 Chapter 1 — Getting Started Attaching the IP30 to the CK61 Series Mobile Computer This section explains how to attach the Bluetooth and USB versions of the IP30 to your CK61. Before you attach the IP30, make sure you are using the correct mounting plates. CK61 mounting plate CK61ex mounting plate CK61 and CK61ex Mounting Plates To attach the IP30 to the CK61 1 Remove the CK61 handstrap by turning the quarter screw counterclockwise. 18 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started 2 Attach the correct mounting plate onto the CK61 and turn the quarter screw or screws clockwise to secure it onto the mobile computer. Attaching the CK61 Mounting Plate Attaching the CK61ex Mounting Plate IP30 Handheld RFID Reader User’s Guide 19 Chapter 1 — Getting Started 3 Lock the CK61 into place by lowering it into the IP30 locking bracket. 4 If you are using the Bluetooth version of the IP30, establish a connection between your mobile computer and the IP30. For help, see “Establishing a Connection With the IP30” on page 22. 5 Connect the USB adapter or the Model AR5 Common Access Card Reader to the IP30. If you are using the USB version of the IP30: a Insert the IP30 USB adapter into the docking connector until it snaps into place. 20 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started b Configure the IP30. For help, see “Configuring RFID Settings” on page 27. If you are using the Model AR5 Common Access Card Reader: a Insert the AR5 into the docking connector until it snaps into place. b Insert the right-angle USB cable into the USB port located on the bottom of the AR5. Wrap the VelcroTM strap around the AR5 to secure the USB cable. 6 Configure the IP30. For help, see “Configuring RFID Settings” on page 27. IP30 Handheld RFID Reader User’s Guide 21 Chapter 1 — Getting Started Establishing a Connection With the IP30 To use the IP30, you must first establish a connection between the IP30 and mobile computer using the Wireless Reader Wizard applet. Note: The USB version of the IP30 establishes a connection with your mobile computer once the IP30 USB adapter is plugged in. For help, see “Attaching the IP30” on page 9. To connect to the IP30 using the Wireless Reader Wizard 1 Make sure you have your Bluetooth radio enabled on your mobile computer. See the mobile computer user’s manual for more information. 2 For Windows Mobile 5.0 or Windows Mobile 6.1, select Start > Settings > System and tap the Wireless Readers icon. The Wireless Reader Wizard appears. For Windows CE, select Start > Programs > Windows Explorer. The Windows Explorer screen appears. a Go to Program Files > Intermec > Network. The Network screen appears. b Double-tap the BluetoothReaderWizard icon. 3 Tap Add Reader. The wizard advances to the next screen. 4 Select how you would like to find your reader (the default is Search) and then click Next. The computer starts discovering readers. 5 Select the reader you want to connect to from the Devices list and then tap Next. Note: The Devices list will show all data collection devices, including RFID readers that are Bluetooth enabled. To connect to the right reader, verify that the serial number you selected matches the one located on the bottom of the IP30’s antenna. 6 When prompted to add the reader to your device list, tap Yes. 7 In the Passcode text box, enter the passcode for your reader. The default passcode for Intermec Bluetooth readers is 0000. 22 IP30 Handheld RFID Reader User’s Guide Chapter 1 — Getting Started 8 Tap Next. The computer connects to the reader and displays the remote device information. 9 Tap Finish. 10 Refresh Intermec Settings to see the Bluetooth reader under RFID. You can now configure and modify your device. For help, see “Configuring RFID Settings” on page 27. IP30 Handheld RFID Reader User’s Guide 23 Chapter 1 — Getting Started 24 IP30 Handheld RFID Reader User’s Guide 2 Creating and Using RFID Applications This chapter explains how you can use RFID applications for the IP30 and includes these topics: • RFID Applications and the IP30 • Creating Applications for the IP30 • Configuring RFID Settings • Configuring the BRI Server 25 Chapter 2 — Creating and Using RFID Applications RFID Applications and the IP30 The IP30 communicates with the mobile computer through the Basic Reader Interface (BRI) Server, which can be accessed in the Application Connection screen within Intermec Settings. The BRI Server controls the reader by issuing various BRI commands. • To configure the BRI Server, see “Configuring the BRI Server” on page 28. • For more information on the BRI, see the Basic Reader Interface Programmer’s Reference Manual or the Intermec Computer Command Reference Manual. Using the RFID Resource Kit The Intermec Developer Library RFID Resource Kits includes Java and .NET tools you can use to develop applications that control the reader and data management. The resource kit is available as part of the Intermec Developer Library (IDL). To learn more about the RFID Resource Kit, go to www.intermec.com and choose Products > Applications and Software > Development Tools > Developer Resource Kits. Creating Applications for the IP30 You must create an application for the IP30 before it can read and write tags. Intermec recommends this general outline for developing your RFID application: • Write your application on a development workstation (your desktop PC). • Install and test the application on your mobile computer. Note: European regulatory requirements state that a reader operating in the 869 MHz frequency can only operate for 6 minutes every hour. The IP30 provides event messages periodically informing the user of the remaining time the reader can be used before this time limit expires. For more information, see the RFID Resource Kits. 26 IP30 Handheld RFID Reader User’s Guide Chapter 2 — Creating and Using RFID Applications If you do not have an application but want to verify that your IP30 can read and write tags, you can download the Intermec demo application from the Intermec web site. To download the Intermec RFID demo application 1 Go to www.intermec.com and choose Support > Downloads. The Download screen appears. 2 Select IP30 Handheld RFID Reader from the Downloads list. The Downloads page displays all of the downloads available for the IP30. 3 Download the installation (.cab) file you need and install it onto your mobile computer. For information on how to install applications onto your mobile computer, see your mobile computer user’s manual. Configuring RFID Settings This section explains how you use Intermec Settings to change the settings for the RFID module in the IP30. As you install and test applications, you can configure the RFID settings for the best system performance. To change RFID module settings 1 Go to Intermec Settings on your mobile computer. 2 For Windows Mobile 5.0, tap RFID > Reader 1 > RFID Module. The RFID Module screen appears. For Windows Mobile 6.1, tap RFID > Enable Reader Service, and select the Enable RFID Service check box. For Windows CE, tap RFID > Reader 1 > RFID Module. The RFID Module screen appears. IP30 Handheld RFID Reader User’s Guide 27 Chapter 2 — Creating and Using RFID Applications 3 Change the RFID settings as needed. For help, see the Basic Reader Interface Programmer’s Reference Manual or the Intermec Computer Command Reference Manual. 4 Save your settings. Configuring the BRI Server The IP30 BRI server handles communications between your application and the RFID module. You can configure many settings for the BRI server. To configure BRI server settings 1 Go to Intermec Settings on your mobile computer. 2 Tap RFID > Application Connection. The BRI application server settings appear. 3 Change the BRI application server settings as needed. For help, see the Basic Reader Interface Programmer’s Reference Manual or the Intermec Computer Command Reference Manual. 4 Save your settings. 28 IP30 Handheld RFID Reader User’s Guide 3 Upgrading and Troubleshooting This chapter includes information on upgrading the IP30 and includes these topics: • Upgrading the IP30 Firmware • Troubleshooting the IP30 • Calling Intermec Product Support 29 Chapter 3 — Upgrading and Troubleshooting Upgrading the IP30 Firmware This section explains how to upgrade the IP30 firmware using your mobile computer. There are two ways to upgrade your IP30: • Use a media card. • Use SmartSystemsTM Foundation. You need to download the latest upgrade files from the Intermec web site to your desktop PC. Upgrading the IP30 Firmware Using a Media Card To upgrade the IP30 firmware, you need: • a media card. The CN3 uses a miniSDTM card, the CK3 uses a microSDTM card, and the CK61 uses an SD card. • a media card reader (optional). You can use any file transfer method (ActiveSync, FTP server, and so on) to copy the upgrade files to your media card. Intermec recommends using a media card reader. To upgrade firmware using a media card 1 Make sure you have an active USB or Bluetooth connection with your mobile computer and IP30. For help, see “Attaching the IP30” on page 9. 2 Download the device upgrade (.cab) file from the Intermec web site to your desktop PC. 3 Load the upgrade (.cab) file onto the media card. 4 Insert the media card into your mobile computer. 5 The upgrade (.cab) file will automatically install onto the IP30. 30 IP30 Handheld RFID Reader User’s Guide Chapter 3 — Upgrading and Troubleshooting Upgrading the IP30 Using SmartSystems Foundation You can use the SmartSystems Console to upgrade the firmware on your IP30. The console is part of SmartSystems Foundation, which is available from the Intermec web site. To upgrade firmware using SmartSystems Foundation 1 Make sure you have an active USB or Bluetooth connection with your mobile computer and IP30. For help, see “Attaching the IP30” on page 9. 2 Make sure that your device is Discovered in the SmartSystems Console. For help, see the SmartSystems Foundation Online help. 3 Download the device upgrade (.exe) file onto your desktop PC. 4 Double-click the application file to install it. The application file should appear in the software vault. 5 From the SmartSystems Console in the software vault, locate the upgrade file, and drag-and-drop it to the mobile computer your IP30 is connected to. IP30 Handheld RFID Reader User’s Guide 31 Chapter 3 — Upgrading and Troubleshooting Calling Intermec Product Support You may need to call Intermec Product Support if you have problems operating the IP30. Before calling, be sure you can answer the following questions: • What were you doing when the error occurred? • What error message did you see? • Can you reproduce the problem? • What is the IP30 serial number? • What versions of the IP30 and RFID software are you using? For help viewing software versions, refer to your mobile computer user’s manual. When you have gathered this information, call Intermec Product Support at 1-800-755-5505. Troubleshooting the IP30 This section includes a list of problems and possible solutions. Problems While Working With RFID Many problems that you may encounter when working with your RFID system can be solved by carefully checking the RFID settings and changing them accordingly. For help, see “Configuring RFID Settings” on page 27. If you are still having trouble connecting your IP30, look at the table on the next page for possible solutions. 32 IP30 Handheld RFID Reader User’s Guide Chapter 3 — Upgrading and Troubleshooting Troubleshooting RFID Problems Problem Solution The IP30 is unable to read • Check to see if you have an active Bluetooth or USB connection RFID tags, or seems to between your IP30 and mobile computer. For help, see read tags slowly or “Establishing a Connection With the IP30” on page 22. inconsistently. • To maximize IP30 performance, make sure you have chosen the correct tag types for your application. For help, see “Configuring RFID Settings” on page 27. • Adjust the FIELDSTRENGTH attribute to 26dB. For more information on how to adjust this attribute, see “Configuring RFID Settings” on page 27. • The IP30 uses a linear antenna. It can only read a tag’s antenna which is oriented in the same way as the IP30’s antenna. A tag’s antenna is oriented the same as the IP30 antenna if the tag element is parallel to the front edge of the IP30 antenna. • Move slightly closer or farther from the tag attempting to be read. Environmental factors can reduce the read range or create deadspots. • Make sure that you are not putting metal or other objects on the antenna. Large rings, or hand jewelry can also affect the performance of the IP30. • Check to see if the mobile computer is working properly. If the device is busy, the IP30 will not be able to work as well if there are too many applications running in the background. • Make sure that the battery is fully inserted into the handle. • Make sure your battery is not low, it may affect the performance of the IP30. The IP30 does not respond • Your application may not be communicating with the IP30, the to your RFID application. BRI server on your mobile computer, or both. • You may need to change BRI server settings to communicate with your application. For help, see “Configuring the BRI Server” on page 28. IP30 Handheld RFID Reader User’s Guide 33 Chapter 3 — Upgrading and Troubleshooting Problems With Connectivity The IP30 connects to your mobile computer via Bluetooth and USB connections. For information on how to connect your mobile computer, see “Establishing a Connection With the IP30” on page 22. If you are still having trouble connecting your IP30, look at the table below for possible solutions. Troubleshooting Connectivity Problems Problem Solution You cannot connect to the IP30 via Bluetooth. • Make sure your Bluetooth radio is enabled and that you have established a connection between your IP30 and your mobile computer. • Verify that your IP30 is not connected to different mobile computer than the one you are trying to connect to. • Make sure that the battery is fully inserted into the handle. For help, see “Using the Battery” on page 7. • Set the BTPWROFF attribute in Intermec Settings to its default value of 500. See the Intermec Computer Command Reference Manual. • Check your IP30 battery to see if it still has power. For help, see “Understanding the LEDs” on page 4. You cannot connect to the IP30 via USB. 34 • Make sure that you have secured the USB adapter to your mobile device. For help, see “Attaching the IP30” on page 9. • Make sure that the battery is fully inserted into the handle. For help, see “Using the Battery” on page 7. • Check your IP30 battery to see if it still has power. For help, see “Understanding the LEDs” on page 4. IP30 Handheld RFID Reader User’s Guide A Specifications This appendix includes physical and electrical specifications for the IP30 and information about the port pin assignments. 35 Appendix A — Specifications IP30 Specifications Height 19 cm (7.5 in) Length 19 cm (7.5 in) Width 10.1 cm (4 in) Weight .43 kg (1.9 lbs) without handheld computer. Electrical rating Operating temperature -15ºC to 50ºC (5ºF to 122ºF) Storage temperature -30ºC to 70ºC (-22ºF to 158ºF) Humidity (non-condensing) 10 to 95% 3.7 V, 2400 mA RFID Specifications Protocols supported EPCglobal Class 1 Gen 2 ISO 18000-6B (Fairchild and Phillips) ISO 18000-6C Phillips v1.19 Frequency range 865-867 MHz, 869 MHz, or 915 MHz Output power 915 MHz 865-867 MHz, 869 MHz Maximum: 30 dBm (26 dB for use with WWAN connection on the CN4.) Maximum: 23 dBm Read range (typical maximum) 915 MHz 457 cm (15 ft) 865-867 MHz, 869 MHz 198 cm (6.5 ft) Write range (typical maximum) 915 MHz 228 cm (7.5 ft) 865-867 MHz, 869 MHz 100 cm (3.3 ft) 36 IP30 Handheld RFID Reader User’s Guide Appendix A — Specifications Port Pin Assignments This section describes the port pin assignments for the USB version of the IP30 for the CK61. Serial Port (COM1) Pin 1 Pin 9 Serial Port Pin Assignments Pin Description DCD Receive data (RXD) Transmit data (TXD) DTR Signal ground DSR RTS CTS 5.0 V (up to 500 mA) IP30 Handheld RFID Reader User’s Guide Active Polarity High High 37 Appendix A — Specifications Adapter Port Pin 1 Ground Adapter Port Pin Assignment 38 Pin Description 12 V IP30 Handheld RFID Reader User’s Guide Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2010 Intermec Technologies Corporation. All rights reserved. IP30 Handheld RFID Reader User’s Guide *934-018-006* P/N 934-018-006
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : kvu Create Date : 2010:05:06 10:12:04Z Modify Date : 2010:05:06 10:30:05-07:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : kvu Title : 934-018-006.book Creator Tool : FrameMaker 8.0 Metadata Date : 2010:05:06 10:30:05-07:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:877d4d23-fbcc-4b29-a2e0-fce7e269aa05 Instance ID : uuid:9d25aeba-74b8-4ea9-aeef-6c8239b5cd39 Page Layout : SinglePage Page Mode : UseOutlines Page Count : 50EXIF Metadata provided by EXIF.tools