Intermec Technologies RFID2450PCC-5 RF Identification Tag PCMCIA Radio User Manual 010312M1

Download:
Mirror Download [FCC.gov]
Document ID	164949
Application ID	kplF8JaUFFhIyyuuIS95fg==
Document Description	app M 2450 radio DOC User Maunal
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.29kB (28603 bits)
Date Submitted	2001-08-16 00:00:00
Date Available	2001-09-25 00:00:00
Creation Date	2001-05-18 16:06:46
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2001-08-15 16:33:06
Document Title	010312M1.PDF
Document Creator	Microsoft Word
Document Author:	Intermec User

Intermec Technologies Corporation
EMC Test Laboratory
DOC. NO.: 577-500-979
2450 PC Card Radio Module, FCC 15.247, Canada RSS-210, RSS-102
APPENDIX M, 2450 PC Card-5 Users Manual and DoC insert
REPORT NO: 010312-1 rev a
DATE: March 12, 2001
Page 1 of 2
FCC ID: EHARFID2450PCC-5
MEASUREMENT/TECHNICAL REPORT
Technologies Corporation
EMC Test Laboratory
Cedar Rapids, IA
Intermec Technologies Corporation
RF Identification (RFID) 2450 PC Card –5
2.4 GHz Spread Spectrum Transmitter
REPORT NO: 010312-1
DATE: March 12, 2001
APPENDIX M
DECLARATION OF CONFORMITY INSERT, USER INFORMATION
FOR THE 2450 PC CARD
Compliance Statement Insert
Device Name: RF Identification Radio Module
FCC ID: EHARFID2450PCC-5
Model Number: 2450 PC Card –5
The responsible party for the compliance of this device is:
Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals
approved by Intermec Technologies Corporation. The use of accessories other than those recommended or changes to this
product that are not approved by Intermec Technologies Corporation may void the compliance of this product and may result in
the loss of the users authority to operate the equipment.
This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the radio of television receiving antenna.
Increase the separation between the computer equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
WARNING: per the FCC and Canadian RF (radio frequency) exposure requirements,
(1) Antennas must be supplied and installed as recommended by Intermec Technologies to ensure compliance to RF exposure
requirements. The antennas approved for use are Intermec part numbers 805-576-001 and 203-622-001. Correct antenna
mounting is fully described within the Intermec RFID 2450 PC Card Users Guide.
(2) When installing and using Intermec approved remote antennas associated the RFID reader, a 10-cm (4-inch) passing distance
must be maintained from any body part of the user or near by persons and the remote antenna. The antenna must not be
touched during transmitter operation.
(3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses
to control RF exposure.
WARNING CANADA USERS: To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing. The end user is responsible to obtain the license.
578-100-0xx Revision A
*578-100-0xx*
*578-100-0xx*
Page 1 of 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : 2001:05:18 16:06:46
Title                           : 010312M1.PDF
Author                          : Intermec User
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2001:08:15 16:33:06-05:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools