Intermec Technologies RN41B wireless portable printer User Manual UserMan 1 EHA RN41B

Intermec Technologies Corporation wireless portable printer UserMan 1 EHA RN41B

Contents

Manual

PB22&PB32 Portable Label and Receipt Printer User’sGuide
Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2009 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. PB22/PB32 Portable Label and Receipt Printer User’s Guide  ii
Before You Begin Before You Begin This section provides you with safety information, technical support information, and sources for additional product information. Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. This section explains how to identify and understand warnings, cautions, and notes that are used in this document.  A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment. A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Support > Returns and Repairs > Warranty. PB22/PB32 Portable Label and Receipt Printer User's Guide vi
Before You Begin Web Support Visit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. Visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support for your Intermec product. Telephone Support In the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click About Us > Contact Us. Service Location Support For technical support in South Korea, use the after service locations listed below: AWOO Systems 102-1304 SK Ventium 522 Dangjung-dong Gunpo-si, Gyeonggi-do Korea, South 435-776 Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 Email: sbkang@awoo.co.kr Sammi Information Systems Co Ltd 7-9FL, Seo Jo Building 103-15, Galwor-Dong Seoul, Yong San-ku Korea, South 140-807 Contact: Kyung-Hee Koo Telephone: +82-2-790-5508 Email: jlovekoo@sammicomputer.co.kr Who Should Read This Manual This user’s guide is for the person who is responsible for installing, configuring, and maintaining the PB22/PB32 printer. PB22/PB32 Portable Label and Receipt Printer User's Guide  vii
Before You Begin This guide provides you with information about the features of the PB22/PB32, and how to install, configure, operate, maintain, and troubleshoot it. Before you work with the PB22/PB32, you should be familiar with your network and general networking terms, such as IP address. Related Documents This table contains a list of related Intermec documents and their part numbers. Document Title  Part Number Intermec Fingerprint Programmer’s Reference Manual 937-005-xxx Intermec Printer Language (IPL) Developer’s Guide 934-013-xxx Intermec Printer Language (IPL) Command Reference 937-007-xxx ManualESC/P Programmer’s Reference Manual.  937-010-xxx The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free. To download documents 1  Visit the Intermec web site at www.intermec.com. 2  Click Support > Manuals. 3  Use the Product Category field, the Product Family field, and the Product field to help you locate the product whose documentation you want to download. PB22/PB32 Portable Label and Receipt Printer User's Guide viii
1  Using the PB22/PB32 Portable Label and Receipt PrinterUse this chapter to familiarize yourself with the PB22/PB32 Portable Label and Receipt Printer. In this chapter you will find these sections: •Learning About the PB22/PB32 Mobile Label Printer •Using the Batteries •Loading Media •Printing a Test Page 1
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Learning About the PB22/PB32 Mobile Label and Receipt Printer The PB22/PB32 is a rugged direct thermal label and receipt printer that is designed for use with the CK3x, 700 series, CK6x, CN3, CN3e, CK3, CV30, and CV60 mobile computers as well as the SF51 and SR61 scanners. The PB22 uses 50.8 mm (2 in) media and the PB32 uses 76.2 mm (3 in) media. The PB22/PB32 provides: •  print resolution of 203 dpi. •  print speeds of up to 100 mm per second (4 ips). •  802.11 or Bluetooth radio options. Identifying the Parts of the Printer Use this illustration to familiarize yourself with some of the features of the PB22/PB32. Self-strip door Communication portMedia cover release button Control panel Ready-to-WorkindicatorPB22/PB32 Printer: This illustration shows the important features of the PB22/PB32 printer. A weather-resistant flap protects the communications ports and the external power connector. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 2
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Understanding the Control Panel The PB22/PB32 control panel contains four buttons, a liquid crystal display (LCD), and one LED indicator. Use the four buttons to navigate the menu system and perform functions on the PB22/PB32 printer. See the following tables to understand the buttons, the menu system, and what the LED means. OKSETUP:SER-COMStandby button  Info button Feed button  Setup buttonReady-to-WorkindicatorUnderstanding How to Use the PB22/PB32 Buttons Button Name Button Function Feed  Press to advance label or receipt paper. The amount of media that feeds is dependent on the type of media you are using. It will advance by 5 mm (0.2 inch), feed out an entire label, or feed a configured length of media based on your media and settings. If the printer is printing, pressing this button causes the printer to pause. Press the button again to resume printing. Setup  Press to display the Setup menu. Not used with ESC/P firmware. Standby  Press to put the printer in Standby mode. In Standby (Power)  mode, power to the radio, the display, and the backlight are turned off.Press to turn the printer back on and put in Ready mode.PB22/PB32 Portable Label and Receipt Printer User’s Guide  3
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Understanding How to Use the PB22/PB32 Buttons (continued) Button Name Button Function Info  Press to display a summary of network connection information and error conditions. Each setting in the summary information displays on the screen for five seconds. All of the buttons can act as “soft keys,” which means that the function of each button depends on the state of the printer. A small icon appears in the screen next to the button to indicate the function it performs. Understanding the Soft Keys Button Soft Keys  Description •  Moves up one level in the menu system. This soft key appears in Setup mode. •Increases the value of a number when editing settings such as an IP address. This soft key appears in Setup mode. •Pauses the printing job. This icon appears only when you are printing. Exit Setup mode and return to Ready mode. Moves through the settings at the same level in the menu system. •Moves down one level in the menu system and saves changes to a setting. •Exits a printing job or exits Information mode. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 4
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer There is only one LED on the PB22/PB32 printer: the Ready-to-Work™ indicator. Understanding the Ready-to-Work Indicator Indicator State Description Off When the light is off, it can mean one of several conditions: •The printer is in Standby mode. •The printer is in Info mode. •The printer is in Setup mode. On  The PB22/PB32 is turned on and operating. Blinking A blinking light can mean one of several conditions: •The printer is out of paper. •The media cover is open. •There is a printer error that requires you to perform an action. For a list of possible problems, see “Troubleshooting the PB22/PB32” on page 42. Understanding the Printer Firmware Your PB22/PB32 printer comes with Intermec Printer Language (IPL), Fingerprint, or Intermec Receipt Protocol (ESC/P) firmware. The choice of firmware affects the functionality of the printer and how you interact with it. This manual contains information for using the different types of printer firmware. When the printer is shipped from the factory, the first person to turn on the printer will have the option of choosing which printer firmware to run on the printer. Press the appropriate button to choose a firmware type. FPIPLESCPChoosing the Printer Firmware PB22/PB32 Portable Label and Receipt Printer User’s Guide  5
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer The current firmware type and version display on the PB22/PB32 screen when the printer is in Ready mode. OKIPL 11.1.0The screen of a PB22/PB32 running IPL firmware Understanding the Printer Sounds The PB22/PB32 plays sounds in response to several actions that you can take with the printer. Use the following table to understand when the sounds occur and what they mean. Understanding the Printer Sounds Sound Occurs When: Power  •You insert a battery in the printer. •The PB22/PB32 starts charging the battery. •You plug in the AC adaptor. Hardware  You open the media door, close the media door, or insert a cable. Button  You press any of the PB22/PB32 buttons. Error  •The printer cannot feed paper or print a job because of a hardware issue such as the media door open, a paper jam, or there is no media. •An error occurs such as a paper jam, a print error, or the printer is out of range. Understanding the Backlight The screen backlight on the PB22/PB32 behaves the same way as a screensaver on your PC. After a set amount of time elapses without any user interaction, the backlight goes off. The screen backlight turns on when: •  the printer begins printing. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 6
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer •  you press a button. •  you connect the printer to external power. •  you are communicating with or sending data to the printer. You can change the amount of time to have elapse before the backlight turns off using the Setup menu. Options for backlight are always off, always on, 5 seconds, 10 seconds, 20 seconds, 30 seconds, or 60 seconds. Using the Batteries The PB22/PB32 uses a rechargeable 2250 mAh lithium-ion battery (Model AB27) for power. You must fully charge the battery before you can use the PB22/PB32. A fully charged battery can last up to one week without needing to be recharged when the printer is in Standby mode. Use Intermec Model AB27 battery only. Use of another battery may present a risk of fire or explosion. The Model AB27 battery may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate. Dispose of used batteries promptly. Keep away from children. Installing the Battery Make sure you fully charge the battery before you use your PB22/ PB32. You can charge the battery before or after you install them into the PB22/PB32. To install the battery 1  Lay the PB22/PB32 upside down on a flat surface. PB22/PB32 Portable Label and Receipt Printer User’s Guide  7
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer 2  Insert the battery with the tab facing away from the front control panel. 3  Insert the edge of the battery under the lip of the PB22/PB32 and then push down until you hear the battery latch click. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 8
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Charging the Batteries There are two ways to charge the PB22/PB32 battery: •Connect AC power to the printer using a 12 VDC power supply and charge the battery while it is in the PB22/PB32. •Charge the battery in the AC18 4-bay battery charger. For information on charging your battery in the 4-bay battery charger, see the AC18 4-Bay Battery Charger Instructions (P/N 943-128-xxx). It takes approximately 3 hours to charge the battery while it is installed in the PB22/PB32 printer. To charge the battery inside the PB22/PB32, you need: •an Intermec 12 VDC power supply (Model AE19). •  an AC power cord. To charge the battery inside the PB22/PB32 1  Install the battery in the PB22/PB32. For help, see the previous section, “Installing the Battery” on page 7. 2  Connect the power supply to the DC power connector on the printer. 3Connect one end of the power cord to the power supply and then plug the other end into an AC outlet. Understanding the Battery Icons The easiest way to tell the status of your battery is to look at the battery icons on the control panel of the PB22/PB32. Battery Icon Status Icon Status Battery is fully charged. Battery has a medium charge. You should be able to work for several more hours before charging or replacing the battery. Battery is low. Recharge the battery. PB22/PB32 Portable Label and Receipt Printer User’s Guide  9
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Battery Icon Status (continued) Icon Status Battery is critically low. You need to replace the battery now. Battery charging error. You may need to replace the battery. External power connected and there is no battery in the printer. Extending Battery Life Here are some tips for extending the overall life of your battery: •Never expose the battery to direct sunlight or temperatures over 50°C (122°F). •Only charge the battery inside the PB22/PB32 using a power supply or in the 4-bay battery charger (Model AC18). •Do not set the backlight to always on. The always on setting disabled automatic power saving modes. Here are some tips for extending the life of your battery between charges: •Press the Standby button to put the printer in Standby mode. •Remove the battery from the printer if you will not be using it for three days or more. •Do not operate the PB22/PB32 in extremely cold temperatures, the allowable operating cold temperature is -20°C (-4°F). Using the PB22/PB32 in temperatures below freezing reduces the overall battery life. Remember that any rechargeable battery loses its ability to maintain a charge over time. You can only recharge it a finite number of times before you must replace it. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 10
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Loading Media You can use roll or fanfold receipt media with the PB22/PB32 printer. The PB22/PB32 ships with a small amount of media loaded and a test page printed to verify that the printer works. The PB22/PB32 supports self-strip printing applications. For information on how to correctly load media for self-strip printing, see “To load media for self-strip printing” on page 14. For information on media, see “Specifications” on page 52. To load media 1  Press down on the blue media cover release button until the cover releases. 2  If necessary, unlock the media support lock before sliding the two media supports apart. PB22/PB32 Portable Label and Receipt Printer User’s Guide  11
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer 3Insert a roll of media and close the media supports so the roll is held firmly in place. Make sure you load the media clockwise so that it pulls off the core from the bottom of the printer. 4  Lock the media support lock.5  Pull out approximately 8 cm (3 in) of the media.PB22/PB32 Porotable Label and Receipt Printer User’s Guide 12
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer 6Close the media cover until it latches. The printer emits the hardware sound to tell you that the media door closed correctly. PB22/PB32 Portable Label and Receipt Printer User’s Guide  13
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer 7  Press down on the self-strip door to make sure the media cover is completely latched. 8  Press the Feed button to advance the media. To load media for self-strip printing 1  Complete Steps 1 through 4 in the previous procedure. 2  Open the self-strip door in the media cover. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 14
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer 3Remove a label from the roll of media so that you are left with several inches of label liner. 4Feed the label liner over the self-strip bar and out the back of the self-strip door. 5Close the media cover until it latches and press down on the self-strip door to make sure it locks. The separated liner and media spool from the self-strip mechanism. PB22/PB32 Portable Label and Receipt Printer User’s Guide  15
Chapter 1 — Using the PB22/PB32 Portable Label and Receipt Printer Printing a Test PageAfter you have loaded media in the printer, you are ready to print a testprint. You can choose from several testprint options for each type of firmware. If you cannot get the testprint information to print, see “Troubleshooting the PB22/PB32” on page 42. To print a test print with a PB22/PB32 loaded with IPL firmware 1  Press the Setup button. 2  Press  until you reach Test/Service. 3  Press   to enter the Test/Service menu system. 4  Press   to enter the Testprint Config menu. 5  Press   to enter the Config menu. 6  Press   to choose a testprint. 7  Press   to print the Config testprint of your choice. To print a testprint with a PB22/PB32 loaded with Fingerprint firmware 1  Press the Setup button. 2  Press  until you reach Print Defs. 3  Press  to enter the Print Defs menu system. 4  Press  until you reach Testprint. 5  Press   to enter the Testprint menu. 6  Press   to choose a testprint. 7  Press   to print the testprint of your choice. To print a self test with a PB50 loaded with ESC/P firmware •  Send the ESC EZ{TP} command to the printer. PB22/PB32 Porotable Label and Receipt Printer User’s Guide 16
3Troubleshooting and Maintaining the PB22/PB32 Use this chapter to solve problems you may encounter while using the PB22/PB32. You will also find information on booting the printer and routine maintenance. 41
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Troubleshooting the PB22/PB32 You may have printer operation, print quality, or printer communication problems at some time during the life of the PB22/ PB32 printer. It is easy to fix most of the problems and you will find solutions in “Troubleshooting Printer Problems and Finding Solutions” on page 44. If you cannot find the answer to your problem, you may need to contact Product Support. Contacting Product Support Before you call Intermec Product Support, you may want to visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support. If you still need help after visiting Knowledge Central, you may need to call Product Support. To talk to an Intermec Product Support representative in the U.S.A. or Canada, call: 1-800-755-5505 Outside the U.S.A. and Canada, go to www.intermec.com and click Contact to find your local Intermec representative. Before you call Intermec Product Support, make sure you have the following information ready: •  Printer serial number •  Firmware type and version •  Bluetooth, wireless, or serial port settings You can find all of the information listed above in the printer menu system or on a test print page. Understanding Error Messages Use the following tables to troubleshoot some common error message you may see display on PB22/PB32 screen. Some of the error messages are specific to the type of firmware you have loaded on your PB22/ PB32. PB22/PB32 Portable Label and Receipt Printer User’s Guide 42
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Possible PB22/PB32 Error Icons and Messages Error Icon  Error Message  Description Pause  The print job is paused. Paper out (IPL)  The printer is out of paper. Load a new roll of Out of Paper  media. For help, see “Loading Media” on (Fingerprint)  page 11. Testfeed not done The printer did not perform a test feed before it printed out test labels. It is important to perform a test feed because it calibrates the sensor. To perform a testfeed: •In Fingerprint, press the Feed button for more than 1 second. •In IPL and ESC/P, open and close the media door and then Press the Feed button. Printhead hot  The printhead is overheated and needs to cool ‘down. In IPL, wait for printing to resume automatically. In Fingerprint and ESC/P, your print job is lost. Upgrading  The printer is loading new firmware. LSS too high, LSS too lowThese errors can occur when you run a test feed without any media installed, or if you have incorrect media settings. Load the printer with media (see “Loading Media” on page 11), run Test mode (see “Understanding Test Mode” on page 21), and select the appropriate media type. IP configuration  The printer is trying to acquire an IP address error from the network. Wait for the printer to complete the task before taking any action. IP link error  No network connection. PB22/PB32 Portable Label and Receipt Printer User’s Guid  43
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Possible PB22/PB32 Error Icons and Messages (continued) Error Icon  Error Message  Description Field out of label  You are attempting to print in an area that extends beyond the print window. See the programmer’s reference manual for your type of firmware (IPL, Fingerprint, or ESC/P) for information on how to set the media parameters. Printhead lifted The printer is not completely closed. Press down on the media cover to make sure it is latched. Troubleshooting Printer Problems and Finding Solutions Use the following tables to troubleshoot some common problems you may encounter with the PB22/PB32 printer. Printer Problems and Solutions Problem Possible Solution The printer does not  •  Replace the battery with a charged battery. turn on when you press  •  Connect external power to make sure the printer Standby.  works correctly and to charge the battery. The blue light (Ready- •  Make sure media is loaded and the media cover to-Work indicator) is  is closed. For help, see “Loading Media” on blinking.  page 11. •There is a printing error. The screen displays an error message containing information on the error. •The printer is paused. The printer is cancelling a print job. Printer keeps printing  •  Check media settings.or feeding when it  •  Make sure the label gap sensor is clean. For help, should stop.  see “Upgrading the Firmware” on page 48. The printout is not in  •  Check for errors in the software application. the desired position.  •  Make sure the label gap sensor and platen roller are clean. PB22/PB32 Portable Label and Receipt Printer User’s Guide 44
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Printer Problems and Solutions (continued) Problem Possible Solution The printer is not  •  Verify that the wireless settings are correct. For printing with an 802.11  help, see “Setting Up 802.11 Radio wireless connection.  Communications” on page 28. •Make sure the printer has an IP address. •Make sure the printer is connected to the network. •Make sure the printer is in Ready mode. The printer is not printing with a Bluetooth connection. •Re-establish a Bluetooth connection with the mobile computer or scanner. For help, see your mobile computer user’s manual or “Setting Up Bluetooth Communications” on page 27. •Make sure the mobile computer can print to a known good printer. •Print a Bluetooth test print page to make sure that the mobile printer discovered your printer. For help, see “Printing a Test Page” on page 16. •Make sure the printer is in Ready mode. When printing, the printer is skipping labels. Perform a testfeed: •In Fingerprint, press the Feed button for more than 1 second. •In IPL, open and close the media door and then Press the Feed button. Make sure the label gap sensor is clean. For help, see “Upgrading the Firmware” on page 48. Printout is faded or weak. •Fingerprint users: adjust the media constant/ factor and contrast (-10% to +10%). •IPL users: adjust the media sensitivity setting (-10 to +10). •ESC/P users: adjust the Media Sensitivity command or the Set Dark Adjust command. For help, see the ESC/P Programmer’s Reference Manual (P/N 937-010-xxx). •Check to see if the printhead needs cleaning. For help, see “Upgrading the Firmware” on page 48. PB22/PB32 Portable Label and Receipt Printer User’s Guid  45
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Printer Problems and Solutions (continued) Problem Possible Solution The battery charge is  •  Check the battery date. If the battery is a few not lasting as long as it  years old, the shortened life may be due to should. normal aging. •Replace the battery. The test pages do not  •  Make sure that the blue light is not blinking. If print.  it is, make sure your printer has media and that the media cover is closed. •Make sure that you can advance media by pressing the Feed button. Print quality it poor.  •Clean the printhead. For help, see “Upgrading the Firmware” on page 48. •Check the battery and recharge or replace as necessary. For help, see “Charging the Batteries” on page 9. •Check the quality of the media. Use only Intermec media to ensure superior print quality and product performance. •Check that the printer is set to the appropriate Constant/Factory or sensitivity number for the media you are using. Troubleshooting Communication Problems Use Dump mode to verify that the printer is receiving data from the host correctly. Using the Line Analyzer in Fingerprint In Dump mode, the printer runs a Fingerprint program called Line Analyzer. The Line Analyzer captures incoming characters on the communication ports and prints them on one or more labels. The easiest way to enter Dump mode is through Test mode or Extended Test mode. For help, see “Understanding Test Mode” on page 21. After the printer enters Dump mode, it tells you it has entered Dump mode by printing it on a label. The display shows the Dump mode icon and printer is ready to receive data. PB22/PB32 Portable Label and Receipt Printer User’s Guide 46
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 While the printer is receiving data, the Ready-to-Work indicator blinks. After a half of a second, if no more characters have been received, the printer times out. The program considers the transmission terminated and prints out a label. Printable characters are printed in black-on-white. Control characters and space characters (ASCII 000 to 032 dec) are printed in white-on-black. As long as a continuous string of characters is being received, the program wraps the lines until the label is full and then starts to print another label. After each character transmission, the following information prints: •Page number •Number of characters printed on the label •Total number of characters received so far When you exit Dump mode, a final label prints to inform you that it is exiting from Dump mode. Using Dump Mode in IPL When you enter Dump mode, the printer captures incoming characters on the communication ports and prints them on one or more labels. If you have IPL firmware on your printer, you can access Dump mode in two different ways with slightly different results: •You can access Dump mode through Test mode or Extended Test mode and you will receive printouts that look exactly like those produced with the Line Analyzer program in Fingerprint. For more information, see the previous procedure, “Using the Line Analyzer in Fingerprint” on page 46. •You can access Dump mode from the Setup menu. If you access Dump mode this way, characters are printed on a continuous line along with corresponding hexadecimal numbers. To enter Dump mode from the Setup menu 1  Press the Setup button. 2  Press  until you reach Test/Service. 3  Press   to enter the Test/Service menu. PB22/PB32 Portable Label and Receipt Printer User’s Guid  47
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 . . 4Press  until you reach Data Dump and then press 5  Press   to select Yes and then press 6Cold boot the printer to exit Dump mode. For help, see the next procedure, “Cold Booting the PB22/PB32.” Cold Booting the PB22/PB32 You rarely need to cold boot the PB22/PB32 printer, unless you are upgrading the firmware. If your printer occasionally locks up, you will want to cold boot it. A cold boot reinitializes the 802.11 radio and clears the working memory. Note: The Setup menu is not affected by a cold boot. Your printer retains all of your configuration settings after the printer powers back up. To reset the PB22/PB32 1  Disconnect the PB22/PB32 from power if externally powered. 2  Remove the battery from the PB22/PB32 for at least one second. 3  Insert the battery back into the PB22/PB32. 4  Reconnect external power if your PB22/PB32 is externally powered. Upgrading the Firmware The latest firmware and software is always available for download from the Intermec web site at www.intermec.com. To download firmware updates 1  Go to the Intermec web site at www.intermec.com. 2  Click Support > Downloads. 3  In the Select a Product field, choose PB22/PB32 mobile printer. The latest available software displays on the page. 4  Download the latest firmware version to your computer. Make sure you choose the correct firmware upgrade for your IPL, Fingerprint, or ESC/P printer. PB22/PB32 Portable Label and Receipt Printer User’s Guide 48
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 5Extract the .zip file to a folder on your computer. You have options for upgrading the firmware based on whether your PB22/PB32 has a Bluetooth radio or an 802.11 b/g radio. Use one of the following procedures to upgrade your printer firmware. Your printer should reboot after you finish upgrading the firmware. If it does not reboot, you will need to cold boot the printer. For help, see “Cold Booting the PB22/PB32” on page 48. To upgrade your printer using PrintSet 1  Download the latest version of PrintSet from the Intermec web site at www.intermec.com. 2Select File > Add Printer to start the Add Printer Wizard which guides you through the process of adding your printer.3Select your printer under My Printers and then go to Printer >Firmware Wizard.The Firmware Wizard guides you through the necessary steps to update your firmware. To upgrade your printer using a serial connection 1  Make sure you have established a serial communications between your PC and the PB22/PB32. For help, see “Setting Up Serial Communications” on page 36. 2Use Fingerprint, IPL, or ESC/P commands to send the upgrade file to the printer. For help with Fingerprint, IPL, or ESC/P commands and information, see either the Fingerprint Programmer’s Reference Manual (P/N 937-005-xxx), the IPL Programmer’s Reference Manual (P/N 937-007-xxx), or the ESC/P Programmer’s Reference Manual (P/N 937-010-xxx). You can download these documents from the Intermec web site at www.intermec.com. PB22/PB32 Portable Label and Receipt Printer User’s Guid  49
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Cleaning the Printer To properly maintain your PB22/PB32, you should clean it at the recommended intervals. To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer. Use only the cleaning agents specified in this section. Intermec is not responsible for damage caused by any other cleaning materials used on this printer. Clean the printer with a cotton swab saturated with alcohol. PB22/PB32 Mobile Label Printer: Identifying the parts of the PB22/PB32 to clean regularly . Tear bar Paper sensor Label takensensorPlaten roller Label gap sensor PrintheadCleaning the PB22/PB32 Printer Printer Part Cleaning Method  Cleaning Interval Printhead Use 70% isopropyl alcohol on  After every five rolls of media a cotton swab to clean the  or more often if necessary. print elements from end to end. PB22/PB32 Portable Label and Receipt Printer User’s Guide 50
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 Cleaning the PB22/PB32 Printer Printer Part Cleaning Method  Cleaning Interval Platen roller Rotate the platen roller and  After every five rolls of media clean it thoroughly with 70%  or more often if necessary. isopropyl alcohol on a cotton swab. Paper sensors Clean thoroughly with 70%  After every five rolls of media isopropyl alcohol and a  or more often if necessary. cotton swab. Tear bar Clean thoroughly with 70%  As needed. isopropyl alcohol and a cotton swab. Exterior  Clean with a water-dampened  As needed. cloth. Interior Brush or air blow. Make sure  After every five rolls of media the paper sensor is free of  or more often if necessary. dust. PB22/PB32 Portable Label and Receipt Printer User’s Guid  51
Chapter 3 — Troubleshooting and Maintaining the PB22/PB32 PB22/PB32 Portable Label and Receipt Printer User’s Guide 52
A  Specifications51
Chapter A — Specifications SpecificationsPhysical Dimensions PB22 Depth:  71.1 mm (2.8 in) Height:  176.4 mm (6.9 in) Width:  101.6 mm (4.0 in) Weight:  450 g (1 lb) with battery PB32 Depth:  81.6 mm (3.21 in) Height:  182.2 mm (7.2 in) Width:  127.6 mm (5.0 in) Weight:  700 g (1.54 lb) with battery Power Specifications AC power adapter  100 to 240 V, 43 to 63 Hz voltage: Printer voltage:  12 VDC and 50 Hz to 60 Hz Operating power:  Rechargeable 7.2 V 2250 mAh lithium-ion battery Temperature and Humidity Specifications Operating temperature:  -20°C to 50°C (-4°F to 122°F)Storage temperature:  -40°C to 70°C (-40°F to 158°F) Charging temperature:  0°C to 45°C (32°F to 113°F) Relative humidity:  10 to 90% non-condensing Sealing: IP54 Memory RAM: 16 MB Flash: 64 MB PB22/PB32 Portable Label and Receipt Printer User’s Guide 52
Chapter A — Specifications Print Speed and Resolution Print speed:  4 ips (100 mm/s) Resolution:  203 dpi (8 dots/mm) Print Technology Printhead: Direct thermal Maximum print width:  PB22 55.88 mm (2.2 in) PB32 83.82 mm (3.3 in) Media Specifications Minimum gap and black mark length:  3.17 mm (0.125 in) Minimum gap, black mark, and notch length:  12.7 mm (0.50 in) Minimum notch length:  6.35 mm (0.25 in) Minimum notch width:  12.7 mm (0.50 in) Black mark width:  Full width of media Core inside diameter:  19.05 mm (0.75 in) 10.16 mm (0.40 in for receipt paper) Roll outside diameter:  PB22 57.15 mm (2.25 in) PB32 67.31 mm (2.65 in) Tracking1 Center Minimum caliper for label with liner and receipts:  0.05 mm (0.002 in) Maximum caliper for label with liner and receipts:  0.165 mm (0.0065 in) Maximum caliper for tags:  0.15 mm (0.006 in) Minimum media length:  12.7 mm (0.5 in) Maximum media length:  Continuous Receipt roll stock media is supplied as a continuous roll. Label, tag, and fanfold media use repeat indicators for non-continuous media. Gap, notch, and black marks are used as repeat indicators: •  Gap: Label and fanfold media •  Notch: Tag media •  Black mark: Label, tag, and fanfold media PB22/PB32 Portable Label and Receipt Printer User’s Guide  53
Chapter A — Specifications Here are a few things to keep in mind when ordering media for the PB22/PB32 printer: •Black marks can only be sensed on the back side of the media. •You can use higher caliper media in the printer, but print quality will be reduced. •Receipt roll stock media has an end of roll indicator. The end of roll indicator is a red marking (on last 3 feet of roll) on the thermally sensitive side of the paper. External Fanfold Media Specifications Stack height:  70 mm (2.75 in) Page length:  152 mm (6 in) to 305 mm (12 in) Note: A 6-inch page length is supplied in 12-inch long stacks (two 6-inch stacks of equal height with the bottom page linked). Specialty media is required for unique customer environments, including printer operating temperature extremes. Intermec recommends that you test the media in your application. Supported Media The PB22/PB32 printer supports direct thermal label, tag, and receipt media. Both North American and European label media are supported in multiple label lengths. Receipt media is supported in both a top coated and an uncoated paper in continuous roll stock only. The default media sensitivity number is: 180. Use the following table as a guide when setting sensitivity numbers. Recommended Media Sensitivity and Constant Sensitivity Constant Description North American Label Media 720 470 450 60 52 48 Duratherm Lightning Plus Duratherm Lightning Perm Duratherm III IR 54  PB22/PB32 Portable Label and Receipt Printer User’s Guide
Chapter A — Specifications Recommended Media Sensitivity and Constant (continued) Sensitivity Constant Description 430  100  Duratherm III Synthetic 180 80 Duratherm II Label 180  80  Duratherm III Label 180  80  Duratherm Near IR 150  50  Duratherm 5 mil Tag 180 80 Duratherm II Floodcoated (NTC) 180  80  Duratherm III Floodcoated (TC) 420  63  Duratherm III NIR Floodcoated (FedEx) North America Receipt Media 401 45 Duratherm TC 102  32  Duratherm NTC - 2 101 30 Duratherm NTC 101  30  Duratherm Receipt - Fanfold 103 75 Duratherm Linerless European Label Media 440 47 Thermal Eco 140 70 Thermal Top 120  67  Thermal Eco Board 140 gr Accessories for the PB22/PB32 You can use these accessories with the PB22/PB32 printer. To order accessories, contact your local Intermec sales representative. AB27 Battery Use the lithium-ion 2250 mAh battery to provide power to the printer. AC18 4-Bay Battery Charger Use the AC18 to charge up to four batteries at a time. The battery charger is designed to sense when a battery is fully charged and not overcharge it, ensuring long and consistent battery life. PB22/PB32 Portable Label and Receipt Printer User’s Guide  55
Chapter A — Specifications AV14 Vehicle Dock Use the vehicle dock to attach the PB22/PB32 to a truck. Belt Clip Use the PB22/PB32 belt clip to attach the printer to your belt. Handstrap Use the PB42 and PB22/PB32 handstrap to conveniently carry your PB22/PB32 printer. With the handstrap attached, you can also attach the shoulder strap. Power Supply (Model AE19) Provides power to the PB22/PB32 and the 4-bay battery charger (Model AC18). Serial Cable The serial adapter is an 8-pin DIN to DB9 connector that connects from the PB22/PB32 printer to your desktop PC. Shoulder Strap Use the shoulder strap in combination with the handstrap to easily carry the PB22/PB32 printer. The wide padded strap makes it comfortable to wear the printer for long periods of time Cart Mount Stands the printer vertically when placed on a flat surface. Excellent for cart or desktop use. PB22/PB32 Portable Label and Receipt Printer User’s Guide 56

Navigation menu