Intex Development SM24101-T Transmitter for Swim Trainer User Manual
Intex Development Company Limited Transmitter for Swim Trainer Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3346111 |
| Application ID | kPPfpwh8ELhYNmk/So4G7g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 470.79kB (5884842 bits) |
| Date Submitted | 2017-04-06 00:00:00 |
| Date Available | 2017-04-06 00:00:00 |
| Creation Date | 2017-02-21 09:49:04 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2017-02-21 09:49:44 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
OWNER’S MANUAL
English
303
PO
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
Hydro Flow™ Swim Trainer
Model SM24101
110-120V AC / 60Hz
For illustrative purposes only. Pool not included.
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves the
right to change specifications and appearance, which may result in
updates to the instruction manual without notice.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
303-*PO-R0-1702
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
TABLE OF CONTENTS
Warnings..................................................................................... 3
Parts Reference.......................................................................... 4-5
Product Specification................................................................ 6
Setup Instructions...................................................................... 6-13
Operating Instructions............................................................... 14-15
Maintenance............................................................................... 15
Internal Parts Replacements..................................................... 16-17
Troubleshooting Guide.............................................................. 18-19
Limited Warranty......................................................................... 20
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
Page 2
303
PO
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
READ AND FOLLOW ALL INSTRUCTIONS
WARNING
• To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with
disabilities.
• Children must stay away from this product and electrical cord(s).
• Assembly and disassembly by adults only.
• Cleaning and user maintenance must be performed by adults only who understand the risk of electric shock.
• For domestic pool use only. Not for commercial use.
• Risk of electric shock. If replacement of the plug or cord is needed, use only identical replacement parts.
• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment
to the product.
• Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit
interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the
receptacle is protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maximum
rate of 30mA. Do not use a portable residual current device (PRCD).
• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and
other equipment.
• To reduce the risk of electric shock, replace damaged cord immediately. Use a qualified electrician to replace the cord.
• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to
connect unit to electric supply; provide a properly located outlet.
• The appliance is only to be used with the provided transformer.
• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
• Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI since the ALCI will not protect people.
• Position the transformer away from the pool, so as to prevent children from climbing on it and accessing the pool.
• Pool covers must be completely removed before using this product.
• People using medications and/or having an adverse medical history should consult a physician before
using this product.
• Do not use drugs or alcohol before or during the use of this product.
• Do not use this product when it is snowing, raining, thundering or lightning.
• Do not use this product immediately following strenuous exercise.
• Do not sit, straddle, step or exert pressure on the product as injury could occur.
• Never play or swim near the swim trainer vent holes.
• Keep hair away from the swim trainer vent holes. Your hair may be trapped causing permanent injury or drowning.
Wear a swim cap.
• Do not obstruct the swim trainer vent holes.
• This product is intended to be used only for the purposes described in the manual!
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC SHOCK,
ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.
SAVE THESE INSTRUCTIONS
Page 3
303
PO
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
Intex Rectangular Frame Pool Mounting Bracket
In Ground Pool Mounting Bracket
14
11
15
13
10
12
Intex Round Frame Pool Mounting Bracket.
NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.
IGP
Intex Rectangular Intex Round Frame
Frame Pool
Pool
POOL
REF. NO.
DESCRIPTION
QTY.
SPARE PART NO.
12591
Mounting Bracket
12592
12592
Bracket space filler
12593
12593
Mounting bracket screw
12396
12396
12396
Anchor screws
12407
Bracket pole
12594
12594
Bracket pole fixer
12595
12595
Screws
16
12598
12598
Pin
12406
12406
10
Horizontal pipe lugs
12597
11
A/B/C gap filler set
12405
12
Horizontal pipe fixer
12596
13
Horizontal pipe A
12403
14
Horizontal pipe B
12402
15
screws
12599
12599
SAVE THESE INSTRUCTIONS
Page 4
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents
and become familiar with all the parts.
19
18
17
20
16
21
22
24
23
31
33
27
30
25
28
26
29
32
REF. NO.
DESCRIPTION
QTY.
IGP
POOL
Intex Rectangular Intex Round Frame
Frame Pool
Pool
SPARE PART NO.
16
Display panel
12379
12379
12379
17
Display panel antenna
12391
12391
12391
18
Remote control
12381
12381
12381
19
Emergency stop lanyard
12374
12374
12374
20
Clamp knob
12395
12395
12395
21
Circuitry box
12387
12387
12387
22
Support bracket
12398
12398
12398
23
Support plate
12399
12399
12399
24
Adjustable bolt with nut
12397
12397
12397
25
Anchor adjustable bolt
12390
12390
26
Wheels
12389
12389
12389
27
Motor
12383
12383
12383
28
Transformer
12377
12377
12377
29
Transformer fuse
12394
12394
12394
30
Transformer fan
12393
12393
12393
31
Propeller kit
12385
12385
12385
32
Swim-trainer unit
12375
12375
12375
33
Adjustable bolt spacer
12600
12600
12600
SAVE THESE INSTRUCTIONS
Page 5
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
PRODUCT SPECIFICATIONS
Model:
Voltage:
SM24101
Transformer input 110-120V AC / 60Hz 8A
Transformer output 24V DC 35A
Suitable for:
In ground pool or Intex above ground metal frame pools
Pool water temperature range: 25ºC - 35ºC
Speed Setting*
m/s
0.66
0.77
0.83
0.94
0.98
1.06
1.16
1.21
ft/s
2.17
2.53
2.72
3.08
3.22
3.48
3.81
3.97
* Approximate
This device generates a constant flow of pool water that allows the user to swim
uninterrupted in the swimming pool.
SETUP INSTRUCTIONS
• Pool must be filled with water prior to installation. Two adults required.
• Tools required: one Philip screwdriver, one flat screwdriver and one small adjustable
wrench.
• Pool size requirements:
Pool water depth: 100cm (39 inch) minimum.
Pool length: 4.6m (15') minimum.
Pool width: 2.5m (8.2') minimum.
Transformer Location Requirement
1. The transformer must be installed on a solid level and vibration-free area.
2. Provide a location protected from the weather, moisture, rain, splashing water, flooding
and freezing temperature.
3. Provide adequate access, space and lighting for routine maintenance.
4. The transformer requires free circulation of air for cooling.
Swim-Trainer Unit and Support Bracket Assembly, for all type of pools.
20
22
24
25
NOTE: Make sure the pool wall is able to support a load of 25 kg (55 Lbs) or more
before installation.
SAVE THESE INSTRUCTIONS
Page 6
303
PO
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
Pool Mounting Bracket Assembly
A: For Intex Rectangular Frame Pools
1. Mounting Bracket Assembly (see figures 1.1 to 1.2):
1.1
1.2
OR
NOTE: Center the swim-trainer unit on the short-end side of the pool.
2. Installing the mounting bracket assembly onto a rectangular frame pool wall
(see figures 2.1 to 2.3)
2.1
SAVE THESE INSTRUCTIONS
Page 7
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
• Lock the bracket poles and mounting bracket assembly onto the U-shaped side
support with the bracket pole fixer (7) and screws (8). (see figure 2.2).
NOTE: Make sure all the screws are securely tightened and the mounting bracket
top surface is level.
2.2
2.3
3. Swim-Trainer Unit Assembly (see figures 3.1 to 3.2).
• Be sure the swim-trainer unit “support bracket” is closed before installing the
swim-trainer unit onto the mounting bracket assembly (see figure 3.1).
3.1
22
MIN
• Extend the support plate, and adjust the depth by loosening the arm collar and
extending the support plate arm until the swim-trainer unit is perfectly horizontal,
retighten to lock it in place. NOTE: The support plate must rest against the inside of
the pool wall surface. (see figure 3.2).
3.2
Water level
90 Degree
SAVE THESE INSTRUCTIONS
Page 8
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
B: For Intex Round Frame Pools
1. Mounting Bracket Assembly (see figures 4.1 to 4.5):
• Identify the frame pool pipe shape. For “ ” shape pipe see figure 4.2 to 4.5.
For “O” shape pipe see figure 4.3 to 4.5.
4.1
• For “ ” shape pipe, remove the bracket space filler (3) from the mounting bracket (2).
(see figure 4.2). For “O” shape pipe go to next step.
• Insert the bracket poles (6) into the mounting bracket (2) inner holes (see figure 4.3).
4.2
4.3
• Connect the horizontal pipe A (13) with horizontal pipe B (14) together, then attach
the horizontal pipe assembly to the mounting bracket assembly using the bracket
pole fixer (7) and screws (8) (see figures 4.4 to 4.5).
4.4
4.5
14
13
12
SAVE THESE INSTRUCTIONS
Page 9
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
2. Installing the mounting bracket assembly onto a round frame pool wall
(see figures 5.1 to 5.3):
5.1
• Attach the mounting bracket assembly onto the frame pool vertical legs with the
horizontal pipe lugs (10), screws (8), and depending on the shape of the vertical leg
pipe include A/B/C gap filler (11) (see figure 5.2).
For “ ” shape vertical leg pipe, do not include the A/B/C gap filler (11).
For 38mm diameter vertical leg pipe include “A” gap filler.
For 44mm diameter vertical leg pipe include “B” gap filler.
For 48mm diameter vertical leg pipe include “C” gap filler.
NOTE: Make sure all the screws are securely tightened and the mounting bracket top
surface is level.
5.2
5.3
11
10
3. Swim-Trainer Unit Assembly (see figures 5.4 to 5.5).
• Be sure the swim-trainer unit “support bracket” is closed before installing the
swim-trainer unit onto the mounting bracket assembly (see figure 5.4).
5.4
22
MIN
SAVE THESE INSTRUCTIONS
Page 10
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
5.5
Ajustable nut
for adjusting the
distance
Water level
90
Degree
C: For In Ground Pools
13
”)
m(
2m
33
215m
m(8.5
”)
6.2
Ø10mm(0.4”)
50mm(2”)
1. Mounting Bracket Assembly (see
figures 6.1 to 6.3):
• Make sure the top surface of the pool
edge is stable, flat and level.
• Pay attention to the electrical, gas and
water lines when drilling the holes.
• All screws provided must be used.
• Drill two holes on the center of the
short-end side of the pool edge where the
mounting bracket will be installed. Insert
the in ground pool screws (5) into the
holes, and make sure the screws are
fully inserted (see figures 6.1 to 6.2).
6.1
MAX 40mm(1.5”)
Water level
100~250mm(4~10”)
• Adjust the nut on the swimming machine
until the support plate is against the pool
wall and the swim-trainer unit is perfectly
horizontal (see figure 5.5).
6.3
• Place the in ground pool mounting
bracket (1) over the installed screws (5)
and tighten the nuts securely
(see figure 6.3).
SAVE THESE INSTRUCTIONS
Page 11
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
2. Swim-Trainer Unit Assembly (see figures 6.4 to 6.5).
• Be sure the swim-trainer unit “support bracket” is closed before installing the
swim-trainer unit onto the mounting bracket assembly (see figure 6.4).
6.4
22
Max
• Adjust the support nuts on the
swim-trainer unit until the swim-trainer
unit is horizontal with the water surface
(see figure 6.5).
6.5
Water level
Swim-Trainer Unit height adjustment
and display panel assembly, for all
types of pools
1. The swim-trainer unit must be submerged
in water with only the top surface of the
housing exposed. Lock the nuts in place
after the height of the swim-trainer unit
is adjusted (see figure 7).
2. Attach the display panel (16) onto the
swim-trainer unit mounting bracket.
Connect the display cable plug to the
display panel receptacle. Tighten up the
display cable collar nut (see figure 8) by
hand. Make sure the display cable plug is
firmly attached and the collar nut is
securely tightened.
Water level
3. Place the flat magnetic end of the
emergency stop lanyard (19) on the
swim-trainer unit (32) housing in order
to activate the unit (see figure 8).
IMPORTANT: During an emergency
situation, pull the emergency stop
lanyard handle, the unit will stop and
the display panel will go blank.
16
19
SAVE THESE INSTRUCTIONS
32
Page 12
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
SETUP INSTRUCTIONS (continued)
Connecting the swim-trainer unit to the
transformer (see figures 9.1 to 9.2).
1. Be sure the transformer (2) switch is
OFF, connect the transformer cable to
a grounded electrical outlet.
9.1
ON/OFF Switch
Power
receptacle
Fuse Box
2. Transformer must be fixed to a solid,
level ground or base. Connect the
swim-trainer unit power cable plug into
the transformer power receptacle. Be
sure the plug collar is securely tightened
(see figure 9.1 to 9.2).
9.2
3. Position the transformer 2m or more away
from the pool, so as to prevent children
from climbing on it and accessing the pool.
4. Test the GFCI or RCD before use:
a) Press the “RESET” button. The
indicator on the RCD should be “ON”.
b) Press the “TEST” button. The indicator
on the RCD should be “OFF”.
c) Press the “RESET” button again to
start using the product.
d) Do not use the product if the test
failed. Contact a qualified electrician to
inspect the electrical outlet socket.
425mm
6.4m
5. Turn the transformer switch ON.
NOTE: To reactivate the swim-trainer unit after the emergency stop lanyard is pulled,
replace the emergency stop lanyard back into the swim-trainer unit, unplugged and
re-plugged the power cable from the transformer.
SAVE THESE INSTRUCTIONS
Page 13
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
303
PO
OPERATION INSTRUCTIONS
Display Panel Function
Zone #2 Function
Zone #1 Function
B C
Antenna
Zone #1 Function
A: On/Off Button
B: Speed Increase Button
C: Speed Decrease Button
D: Speed Setting Display
A: On/Off Button: Once the swim-trainer unit is connected to the
transformer and the transformer turned ON, use this button to active the system.
The LED panel will show the default speed setting once activated.
B/C: Speed Adjustment Buttons: Press to increase or decrease the speed setting.
NOTE: The default speed is 3; speed adjustment ranges from 1 to 8.
D: Speed Setting Display: Once activated the system displays the swim-trainer
unit speed automatically.
Zone #2 Function
H: Toggle button between Timer “
” and Counter “
” Mode.
Timer Mode: Allows the user to program the duration of the
swimming time (in minutes). Once the time is reached,
the machine will stop. Maximum setting is 90 minutes.
E: Timer Increase Button
F: Timer Decrease
G: Timer Review/Confirm Button
I: Timer LED Display
Counter Mode: Tracks the duration (in minutes) or calorie
(in kcal) or distance (in kilometer or mile) of the swim.
E/F: Counter unit toggle button (minute / kcal
/ kilometer / mile)
G: Counter On/Pause Button. Press for 2 sec
to reset the counter.
I: Counter LED Display
SAVE THESE INSTRUCTIONS
Page 14
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
303
PO
OPERATION INSTRUCTIONS (continued)
Remote Control:
1. Remove the insulation material under the battery.
Battery type (included): CR2032. Be sure the battery cover
is securely attached.
2. Place the remote control in a reachable location (on top
of the horizontal pool frame). The back of the remote
control is magnetized”.
Emergency Cut off Button
Note: In an emergency situation, simply press the “emergency cut off” button to shut off the
system completely, the indicator light inside the remote control housing will light up and the
display panel will indicate “C”.
MAINTENANCE
•
•
Check and make sure all screws are securely tightened on a regular basis.
When not in use, fold the display panel down and cover the pool with a pool cover.
Long Term Storage and Winterization
You must disassemble and store the product indoors when the temperature drops below 0OC /
32OF or when the appliance will not be used for a long period of time.
IMPORTANT: Close the support bracket before
10
disassembling and removing the swim-trainer unit from
the mounting bracket assembly (Only for Intex
22
Rectangular Frame Pools).
1. Turn off the transformer and unplug the power cable
from the electrical outlet.
2. Disconnect the swim-trainer unit power cable from the
transformer.
3. Remove the swim-trainer unit and the
mounting bracket assembly from the pool by reversing
the installation instructions.
4. Clean the swim-trainer unit with a garden hose, and air-dry thoroughly under the sun.
5. Store the unit and accessories in a dry place. The storage’s temperature should be between
0OC / 32OF and 40OC (104OF). The original packing can be used for storage.
SAVE THESE INSTRUCTIONS
Page 15
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
INTERNAL PARTS REPLACEMENTS
Tools required: one Philip screwdriver, one flat screwdriver and one small adjustable
wrench.
A: Propeller and motor disassembly
31
MAX
22
27
SAVE THESE INSTRUCTIONS
Page 16
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
303
PO
English
INTERNAL PARTS REPLACEMENTS (continued)
B: Swim-trainer unit bracket and circuitry box disassembly
16
20
22
24
22
33
SAVE THESE INSTRUCTIONS
10
Page 17
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
303
PO
TROUBLESHOOTING GUIDE
LED PANEL
CODE
PROBLEM
● The
●
●
●
●
●
●
maximum operating time
(90 minutes) has finished under the
same set mode.
● It's normal. Turn off and unplug the unit.
Then plug the RCD/GFCI back and
restart all back again.
Low water level.
swim-trainer unit is not fully immersed
in the water.
Remote control is in an emergency cut
off situation.
Household voltage is too low.
●
Household voltage is too heigh.
Clogged motor impeller
● Check
●
●
●
●
Fill the pool with water up to correct water
level (see pool owner‘s manual).
Make sure the device is under the water.
It‘s normal. Turn off the transformer for 1
minute, then plug in.
Check the voltage is within the range
stated on the device housing.
the voltage is within the range
stated on the device housing
Turn off the power, check and clean the
motor impeller
●
Water temperature is around
35°C (95°F)
● Turn off and unplug the unit. When the
water has cooled down, plug the RCD/
GFCI back and restart all over again.
●
Operating time is too long
Water temperature is around
35°C (95°F)
● Turn off and unplug the unit, after 30
minutes later plug the RCD/GFCI back
and restart all over again.
●
Turn off and unplug the unit. When the
water has cooled down, plug the RCD/
GFCI back and restart all over again.
●
SOLUTION
SAVE THESE INSTRUCTIONS
Page 18
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
303
PO
TROUBLESHOOTING GUIDE (continued)
PROBLEM
Mounting bracket
can‘t be assembled
with the in ground
pool
CAUSE
ground is not concrete, i.e., it is
asphalt, lawn or earth.
The screws are not fully inserted in the
drill holes.
● The
● Assembly
●
●
The support bracket is not opened.
Adjust the support nuts on the
swim-trainer unit.
swim-trainer unit is
not horizontal with
the water surface
●
No output from the
transformer
swim-trainer unit will hibernate if no
operating more than 1 hour.
● The transformer fuse broken.
● Motor too hot and overload protection is
shut off.
No LED display
●
●
●
●
●
●
●
Abnormal display /
buttons not working
●
Too noisy / Jet water
is weak or shaking
●
●
●
●
Remote Control out
of control
SOLUTION
●
The transformer is unplugged or off.
The transformer is not connected with
swim-trainer unit.
Display panel cord is loose.
Display panel failure.
Emergency stop lanyard is put wrong
place.
Display panel cord is loose.
Display panel failure.
Swim-trainer unit is not fully immersed in
the water.
The motor impeller is broken.
swim-trainer unit components
not securely connected or in place.
The battery is on low power.
SAVE THESE INSTRUCTIONS
the mounting bracket
on the cement ground.
Check and tighten the screws
securely.
● Open and adjust the support
bracket. See “Setup Instructions”.
●
Adjust the support nuts on the
swim-trainer unit.
Turn off the transformer, waiting 2
minutes then turn on agin.
●
Replace the transformer fuse.
● Let the motor cool down and
restart again.
●
Ensure the transformer is plugged
and switched on.
●
Connect the transformer with
swim-trainer unit.
●
Ensure that the display cord is
plugged firmly into the cell housing
receptacle.
●
Contact Intex Service Center.
●
Put the emergency stop lanyard
on correct place. See “Setup
Instructions”.
●
● Ensure the display cable is
plugged firmly into the display
panel receptacle.
● Contact Intex Service Center.
Make sure the device is under
the water.
●
Turn off and replace the motor
impeller.
● Check all components, especially
the support bracket. See “Setup
Instructions”.
●
●
Replace the remote control
battery.
See “Operating Installations”
Page 19
(303PO) MODEL SM24101 SWIMMING MACHINE ENGLISH 7.5” X 10.3” PANTONE 295U 02/21/2017
English
303
PO
LIMITED WARRANTY
PARTS LIST
Your Hydro Flow™ Swim Trainer has been manufactured using the highest quality materials
and workmanship. All Intex products have been inspected and found free of defects prior to
leaving the factory. This Limited Warranty applies only to the Hydro Flow™ Swim Trainer and
accessories listed below.
The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for the period noted below from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase
will be required and must accompany warranty claims or the Limited Warranty is invalid.
Hydro Flow™ Swim Trainer Warranty – 2 Years
If a manufacturing defect is found within the periods noted above, please contact the
appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet.
The Service Center will determine the validity of the claim. If the Service Center directs you
to return the product, please carefully package the product and send with shipping and
insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex
Service Center will inspect the item and determine the validity of the claim. If the provisions
of this warranty cover the item, the item will be repaired or replaced at no charge.
Any and all disputes regarding the provisions of this Limited Warranty shall be brought before
an informal dispute settlement board and unless and until the provisions of these paragraphs
are carried forth, no civil action may be instituted. The methods and procedures of this
settlement board shall be subject to the rules and regulations set forth by the Federal Trade
Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS
WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR
CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This Limited Warranty does not apply if the products are subject to negligence, abnormal use
or operation, accident, improper operation, improper voltage or current contrary to operating
instructions, or to damage by circumstances beyond Intex’s control, including but not limited
to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or
other external environmental forces. This Limited Warranty applies only to those parts and
components sold by Intex. The Limited Warranty does not cover unauthorized alterations,
repairs or disassembly by anyone other than Intex Service Center personnel.
DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN
OR REPLACEMENT. IF YOU ARE MISSING PARTS OR NEED
ASSISTANCE, PLEASE CALL US TOLL-FREE (FOR U.S. AND
CANADIAN RESIDENTS): 1-800-234-6839 OR VISIT OUR WEBSITE:
WWW.INTEXSTORE.COM.
Proof of Purchase must accompany all returns or the warranty claim will be invalid.
SAVE THESE INSTRUCTIONS
Page 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2017:02:21 09:49:04+08:00 Metadata Date : 2017:02:21 09:49:44+08:00 Modify Date : 2017:02:21 09:49:44+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:50c11cff-4547-4749-aa7e-5b35d1135278 Original Document ID : xmp.did:44E86EC5523BE111B301F4AB000B01FB Document ID : xmp.id:F94321EDD7F7E611B5B6D2FE601372A2 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5F45A6E4D7F7E611B5B6D2FE601372A2 Derived From Document ID : xmp.did:6D605E00DDD7E611BE2D95817803DE00 Derived From Original Document ID: xmp.did:44E86EC5523BE111B301F4AB000B01FB Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2017:02:21 09:49:04+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 20 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools