Inventec Appliances JGW200001 GSM/GPRS 1900 module User Manual UPMJGW200001 Rev2
Inventec Appliances (Jiangning) Corporation GSM/GPRS 1900 module UPMJGW200001 Rev2
User manual
CM-G100 Usermanual/Datasheet GSM/GPRS DATA MODULE CM-G100 Useramnual/Datasheet Jun 08, 2009 Confidential Page 1 of 10 CM-G100 Usermanual/Datasheet Contents DOCUMENT HISTORY ...................................................................................................................................................3 1. OVERVIEW ................................................................................................................................................................4 1.1 1.2 1.3 2. ABOUT THE PRODUCT ...........................................................................................................................................4 ABOUT SAFETY .....................................................................................................................................................5 ABOUT OPERATION ...............................................................................................................................................5 TECHNICAL SPECIFICATIONS............................................................................................................................6 2.1 2.2 2.3 2.4 2.5 GENERAL SPECIFICATIONS ...................................................................................................................................6 RECEIVE SPECIFICATIONS ....................................................................................................................................6 TRANSMIT SPECIFICATIONS ..................................................................................................................................7 COMPLIANCE WITH STANANDARDS .......................................................................................................................8 CONNECTIVITY ......................................................................................................................................................8 3. PIN ASSIGNMENT....................................................................................................................................................8 4. OUTLINE & DIMENSION .......................................................................................................................................9 4.1 4.2 4.3 CM-G100 OUTLINE ..............................................................................................................................................9 DISASSEMBLY VIEW ............................................................................................................错误!未定义书签。 RF CONNECTOR .................................................................................................................................................10 Jun 08, 2009 Confidential Page 2 of 10 CM-G100 Usermanual/Datasheet Document History Version Draft Jun 08, 2009 Date 2009/06/08 Author Fan Cros Confidential Comments New Issue. Page 3 of 10 CM-G100 Usermanual/Datasheet 1. Overview Thank you very much for choosing this product. Please carefully read this Operation Manual before use CM-G100. Please keep the Operation Manual well after reading. 1.1 About the Product It is GSM-SIM card and it is an independent miniature module of GSM’s wireless communication part. The operation method is different from the corresponding products. So please refer to the Operation Manual of every product. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Some electronic devices are susceptible to electromagnetic interference sent by this equipment if inadequately shielded. Please use this equipment at least 20cm or as far as you can from TV set, radio and other automated office equipment so as to avoid interference. This device is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The maximum antenna gain which is allowed for use with the device for mobile or fixed operating conditions should not exceed 5dBi. This device is to be used only for fixed and mobile applications. If the final product after integration is intended for portable use, a new application and FCC is required. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. Jun 08, 2009 Confidential Page 4 of 10 CM-G100 Usermanual/Datasheet When the module is installed into a host device, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: "Contains FCC ID: UPMJGW200001" 1.2 About Safety Do not disassemble or reconstruct or repair the card. Do not drop or strongly impact the card. Do not bend or press it. Do not wet it or touch it with wet hand. Do not touch the terminal part or score it. Do not conserve it in a direct sun light or a high temperature place. Do not conserve it in a damp or dirty place. Please conserve it in a place where children can not touch to avoid them putting the card in their mouths accidentally. Please teach the content of this operation manual to your children when they use. And, please make sure that they comply with the indication when using. 1.3 About Operation Please insert the card in proper strength. The product will be a little heating-up when using. It’s not an abnormal phenomenon. If a malfunction appears because of inserting the card into an uncorresponding product, our company won’t be in charge of it. Please notice the static. Please clean with dry soft cloth when the card is dirty. Lost or Damage and so on will get a reimbursable service. There may be a modification of specification or function without a notification. Please conserve your information which inputted into the card in another memory. If the information disappears unfortunately, our company won’t be in charge of it. Jun 08, 2009 Confidential Page 5 of 10 CM-G100 Usermanual/Datasheet 2. Technical Specifications 2.1 General Specifications items Access Mode Protocol Date Rate(Max.) Transmit/Receive Frequency Interval Max Output Power Operation Voltage Current Consumption (Typical) Frequency Stability Size Weight Operation Temperature Storage Temperature Descriptions Global System for Mobile communication(GSM) , General Packet Radio Service(GPRS) 3GPP TS 51.010-1 (GSM/GPRS) GPRS multi slot class 12 : 48Kbps (up link), 48Kbps (down link) GSM/GPRS 900 45MHz GSM/GPRS1800 95MHz GSM/GPRS 1900 80MHz GSM/GPRS 900 33dBm (Power class : 4) GSM/GPRS 1800 30dBm (Power class : 1) GSM/GPRS 1900 30dBm (Power class : 1) 3.4V~4.2V Idle 3mA Voice Communication 170mA Data Communication 200mA ±0.1ppm (at carrier frequency) (W) 25.6 mm ± 0.10 mm (D) 42.0 mm ± 0.20 mm (H) 4.0 mm ± 0.15mm Approximately below 10g 0ºC ~ +50ºC -10°C ~ + 60°C 2.2 Receive Specifications items Frequency Range GSM/GPRS 900 GSM/GPRS1800 GSM/GPRS 1900 Minimum Input level for Reference Performance GSM/GPRS 900/1800/1900 Jun 08, 2009 Confidential Descriptions 925 ~ 960MHz 1805 ~ 1880MHz 1930 ~ 1990MHz Propagation condition : Type of Channel Static, BLER : 10% under PDTCH/CS-1 (dBm) -104 PDTCH/CS-2(dBm) -104 PDTCH/CS-3(dBm) -104 PDTCH/CS 4(dBm) -101 Page 6 of 10 CM-G100 Usermanual/Datasheet 2.3 Transmit Specifications items Frequency Range Frequency Error Phase Error Transmit Output Power ORFS@Spectrum to modulation due ORFS@Spectrum due to switching transient Jun 08, 2009 Descriptions GSM/GPRS 900 880 ~ 915MHz GSM/GPRS1800 1710 ~ 1785MHz GSM/GPRS 1900 1850 ~ 1910MHz ±0.1ppm (at carrier frequency) Peak phase error 20 Degree RMS phase error 5 Degree Power Level Output Power (dBm) Tolerence (dBm) 33 ±2 GSM/GPRS 900 31 ±3 29 ±3 GSM/GPRS 30 ±2 1800/1900 28 ±3 Frequency ±600~ 0~ offset ±200 ±250 ±400 <±180 ±100 (KHz) GSM/GPRS 900 Relative +0.5 -30 -33 -60 -60 (dB) Absolute -36 -51 (dBm) Frequency ±600~ 0~ offset ±200 ±250 ±400 <±180 ±100 (KHz) GSM/GPRS Relative 1800/1900 +0.5 -30 -33 -60 -60 (dB) Absolute -36 -56 (dBm) Power Frequency offset (KHz) (dBm) ±400 ±600 ±1200 ±1800 33 -19 -21 -21 -24 31 -21 -23 -23 -26 GSM/GPRS 900 29 -23 -25 -25 -28 27 -23 -26 -27 -30 25 -23 -26 -29 -32 23 -23 -26 -31 -34 ≤21 -23 -26 -32 -36 Power Frequency offset (KHz) (dBm) ±400 ±600 ±1200 ±1800 30 -22 -24 -24 -27 GSM/GPRS 28 -23 -25 -26 -29 1800/1900 26 -23 -26 -28 -31 24 -23 -26 -30 -33 22 -23 -26 -31 -35 ≤20 -23 -26 -32 -36 Confidential Page 7 of 10 CM-G100 Usermanual/Datasheet 2.4 Compliance with Stanandards 3GPP TS 51.010-1 (GSM/GPRS) GPRS/EGPRS Multislot Class 12, Phase 2+ 2.5 Connectivity UART in dedicated socket 3. PIN Assignment Plug number Name of signal Direction TXD RXD RTS* CTS* DTR*/INTM J→C J←C J→C J←C J→C DCD*/INTH J←C POWER ON J→C UART sends serial data UART receives serial data UART send data ready (L: ON, H: OFF) UART ready (L: ON, H: OFF) UART receive data ready (L: ON, H: OFF) or host unit wake up G-SIM (L: OFF, H: ON) UART data carrier detect (L: ON, H: OFF) or G-SIM wake up host unit (L: OFF, H: ON) G-SIM power control (L: OFF, H: ON) INS* J←C G-SIM detection signal (L: plugged in, H: not plugged in) 10 11 12 13 14 15 16 17 18 Vcc GND REC+ RECSIMVCC MIC+ MICSIMRST SIMDATA SIMCLK Vcc GND J←C J←C J←C J→C J→C J←C J C J←C Power Grounding Signal of receiving unit, analogue differential input. Signal of receiving unit, analogue differential input. Supply power for external SIM Signal of microphone, analogue differential input. Signal of microphone, analogue differential input. SIM reset SIM data SIM clock Jun 08, 2009 Content Confidential Page 8 of 10 CM-G100 Usermanual/Datasheet 4. Outline & Dimension 4.1 CM-G100 Outline Jun 08, 2009 Confidential Page 9 of 10 CM-G100 Usermanual/Datasheet 4.2 RF Connector Jun 08, 2009 Confidential Page 10 of 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2009:06:18 13:00:21+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2009:06:18 13:00:21+08:00 Format : application/pdf Creator : Zhao Yang Title : Microsoft Word - UPMJGW200001_User Manual_Rev2.doc Document ID : uuid:cb91e5eb-d27a-4e99-831a-52405ccb957f Instance ID : uuid:d6916b1c-9686-4421-8d88-a6c16815b434 Page Count : 10 Author : Zhao YangEXIF Metadata provided by EXIF.tools