Inventec BC8121AABAB0 PDA Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1033269
Application ID	LwEci9jdkgF9Tpvkoho85A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	98.22kB (1227805 bits)
Date Submitted	2008-11-20 00:00:00
Date Available	2008-11-24 00:00:00
Creation Date	2008-09-18 15:31:20
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2008-10-01 14:25:59
Document Title	Microsoft Word - C111_Eng_UM_20080918_for FCC test.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	IEC950331

Velocity 111 User Manual
This is only the beginning.
We are constantly enhancing and improving our user experience. For the latest information on what
we’ve added and how it works visit us online.
www.velocitymobile.com
Copyright © 2008 Velocity Mobile All Rights Reserved.
No part of this manual, including the product and software described in it, may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language in any form, by any means, without prior written permission from Velocity
Mobile.
Velocity Mobile provides this publication “as is” without warranty of any kind. This information could include technical
inaccuracies or typographical errors. Velocity Mobile may make improvements and/or changes in the product. Information and
specifications contained in this document are subject to change at any time without notice.
The information contained in this document does not affect or change the product specifications or warranties. Velocity Mobile
is not liable for any damages resulting from the use of this product.
IMPORTANT PRECAUTIONS
Please read the following information carefully before you start using the Velocity 111 to avoid any damage caused by improper
usage:

The device is not charged when you take it out of the box. The battery should be charged for at least 8 hours before
first use. Do not remove the battery while charging.

Do not service any product yourself. Service needed on components inside these compartments should be done by an
authorized service technician or provider.

Do not use batteries which have not been specified by the manufacturer, as this may cause leakage or rupture.
Damage caused by using batteries not specified by the manufacturer is not covered under warranty.

Do not charge the battery with an unspecified AC Adapter, as this may cause damage to both the device and the
battery.

Do not leave the AC adapter in places where the temperature may be lower than ‐20℃(‐4℉) or higher than 70℃(158
℉) as this may damage the AC adaptor.

When discarding the batteries, dispose of them in a proper manner, according to the battery manufacturer’s
instructions and your local laws.

Power off the device and remove the battery before inserting SIM card. Make sure the SIM card snaps correctly into
the SIM socket.

Do not open or tamper with the device cover, as this will void your warranty.

Do not press hard on this product, as it may cause damage to the screen or the internal components.
Do not use the device at gas or refueling stations, chemical plants, and places containing explosives or flammable

materials. The product should be placed away from heat sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.

Do not strike, shake, or heat the device in a way which may cause battery leakage or rupture and damage to the
device.

Use only a manufacturer‐specified stylus. Do not scratch the screen or otherwise bring it into contact with any hard
objects (e.g. loose change in your pocket).

Do not clean the screen with chemical detergents. Only use cloths specifically designed for cleaning liquid‐crystal
displays. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning, but NEVER use water to clean the LCD screen.

Do not expose the device to prolonged direct sunlight, or leave the device in a humid environment for extended
periods of time, as this may cause damage to the device and battery.

Do not immerse the device in water. Never use the product in a wet location.

The device may interfere with the navigation and/or communication systems on aircraft. The use of the device on an
aircraft is prohibited by laws in most countries.

This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and
medical clinics.

Always use hands‐free devices, if you need to use the telephony services, while driving a vehicle.

Please turn down the volume before using headphones or other audio devices.

Do not place the product on an unstable base.

Do not push objects of any kind into cabinet slots or other openings in the device.

The device should be operated from the type of power indicated on the marking label. If there are noticeable signs of
overheating, unplug the device from the electrical outlet immediately and refer servicing to an authorized service
provider.

Warning: Do not remove or damage the warranty void label on the device, as this will void your warranty.
Non‐ionizing Radiation
This product should be operated only in the suggested typical conditions to ensure good radiative performance and safety from
interference. For safety reasons, as with all other mobile radio‐transmitting equipment, it is recommended that no part of the
human body be allowed to come too close to the antenna during operation of the equipment.
Trademark Information
Microsoft, MS‐DOS, Windows, Windows NT, Windows Server, Window Vista, Windows Mobile, ActiveSync, Excel, Internet
Explorer, Windows Live, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
All other trademarks are property of their respective owners.
Table of Contents
VELOCITY 111 USER MANUAL ................................................................................................................................ 1
CHAPTER 1: OVERVIEW.......................................................................................................................................... 6
1.1 INTRODUCTION .....................................................................................................................................................6
1.2 INTRODUCTION CONT. ...........................................................................................................................................8
1.3 INSTALLING SIM CARD, BATTERY AND MICRO SD CARD .....................................................................................9
1.4 BATTERY INFORMATION ......................................................................................................................................11
CHAPTER 2: BASIC OPERATIONS........................................................................................................................... 13
2.1 GETTING STARTED ..............................................................................................................................................13
2.2 TODAY SCREEN ...................................................................................................................................................14
2.3 VOTA (VELOCITY OVER THE AIR) .....................................................................................................................16
2.4 VELOCITY TOOLBAR ...........................................................................................................................................17
2.5 START MENU ......................................................................................................................................................17
2.6 PROGRAMS, SETTINGS AND ICONS ......................................................................................................................18
2.7 INPUT METHODS .................................................................................................................................................20
CHAPTER 3: SYNCHRONIZING INFORMATION....................................................................................................... 23
3.1 INSTALLING AND SETTING UP ACTIVESYNC ........................................................................................................23
3.2 INSTALLING AND SETTING UP WMDC ................................................................................................................23
3.3 SYNCHRONIZING INFORMATION ..........................................................................................................................24
3.4 CHANGING SETTINGS FOR AN INFORMATION TYPE .............................................................................................24
3.5 SYNCHRONIZING WITH EXCHANGE SERVER ........................................................................................................25
3.6 SYNCHRONIZING VIA BLUETOOTH ......................................................................................................................25
CHAPTER 4: PHONE.............................................................................................................................................. 26
4.1 MAKING A CALL .................................................................................................................................................26
4.2 CONFIGURING THE PHONE ..................................................................................................................................28
4.3 VOICE CALL IN-CALL OPTIONS ..........................................................................................................................30
4.4 VIDEO CALL IN-CALL OPTIONS ..........................................................................................................................31
CHAPTER 5: CONTACTS & MESSAGING................................................................................................................. 33
5.1 USING CONTACTS ...............................................................................................................................................33
5.2 TEXT MESSAGING ...............................................................................................................................................34
5.3 MULTIMEDIA MESSAGING SERVICE ....................................................................................................................35
5.4 E-MAIL ...............................................................................................................................................................36
5.5 USING SIM MANAGER........................................................................................................................................38
CHAPTER 6: BASIC APPLICATIONS ........................................................................................................................ 40
6.1 USING CALENDAR ..............................................................................................................................................40
6.2 USING NOTES .....................................................................................................................................................41
6.3 USING TASKS ......................................................................................................................................................43
CHAPTER 7: CONNECTING TO THE INTERNET ....................................................................................................... 45
7.1 SETTING UP INTERNET CONNECTIONS .................................................................................................................45
7.2 USING A WI-FI CONNECTION ..............................................................................................................................47
7.3 USING WIRELESS MANAGER ..............................................................................................................................49
7.4 USING INTERNET EXPLORER MOBILE .................................................................................................................50
CHAPTER 8: TRANSFERRING FILES TO AND FROM THE DEVICE ............................................................................. 53
8.1 USING ACTIVESYNC ...........................................................................................................................................53
8.2 TRANSFERRING FROM MEMORY CARDS ..............................................................................................................53
8.3 USING BLUETOOTH .............................................................................................................................................54
CHAPTER 9: OTHER APPLICATIONS....................................................................................................................... 56
9.1 WINDOWS LIVE MESSENGER ..............................................................................................................................56
9.2 JETCET PDF5 ...................................................................................................................................................57
9.3 WINDOWS MEDIA ...............................................................................................................................................58
9.4 MIDLET MANAGER ............................................................................................................................................59
9.5 PHONE PROFILE ..................................................................................................................................................59
9.6 GPS ....................................................................................................................................................................60
9.7 INTERNET SHARING ............................................................................................................................................61
CHAPTER 10: CAMERA ......................................................................................................................................... 63
10.1 OVERVIEW ........................................................................................................................................................63
10.2 TAKING A PICTURE ............................................................................................................................................64
10.3 TAKING A VIDEO ................................................................................................................................................64
10.4 SETTINGS AND OPTIONS....................................................................................................................................64
10.5 PICTURES AND VIDEOS .....................................................................................................................................65
APPENDIX ............................................................................................................................................................ 66
A.1 SPECIFICATIONS .................................................................................................................................................66
A.2 REGULATORY NOTICES ......................................................................................................................................68
Chapter 1: Overview
1.1 Introduction
Hardware Overview
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Volume up
Press to turn up the volume; Press and hold for maximum volume.
Record *
Press to record a voice note.
Volume down
Press to turn down the volume; Press and hold to turn the ringer off.
MicroSD Card Slot
Power slider
Slide the button to the right and hold to turn on; slide the button to the left to lock, slide the button to the
right to turn off the back light.
2.5mm Headphone TV out
Stylus
Forward facing camera
Use this camera for video calling.
Telephone receiver
Speaker for listening to phone calls.
Indication LED
Indicates notification/battery/GSM status. The blue light flashes when notifications exist for messages, missed
calls or reminders. LED displays solid red or green light when the battery is under charge or the battery is fully
charged. Green light flashes when GSM/UMTS is on.
Touch screen
2.46‐inch TFT LCD touch screen display.
SEND
Press to activate the dialer and to initiate a call.
Start
Press to pull down the start menu.
Jog ball
Scroll up, down, left or right to navigate; press to select.
OK
Press to make a selection.
END
Press to end a call; press and hold to return to the Today screen.
QWERTY keypad
Microphone
Mini‐USB Cable Connector
Back cover lock
Velocity Button
Press to launch Velocity toolbar. Press and hold to activate the launcher.
OK (side key)
Press to make a selection.
Camera Button*
Press and hold to launch the camera.
Reset
Using the stylus, press to soft reset the device. Be sure to switch the device into sleep mode before resetting
the device, otherwise unsaved data or settings may be lost.
Speaker
26
Main camera
27
Back cover
* These buttons are configurable. To assign new programs/functions, select StartSettingsButtons.
10
11
22
12
13
14 15
16
23
24
17
18
19
26
21
25
20
27
25
1.2 Introduction cont.
What’s in the box
AC Adapter
Stereo Headset
USB Cable
Video Out Cable
Protective Pouch
Battery
UK Plug
EU Plug
Extra Stylus
1
1.3 Installing SIM Card, Battery and Micro SD Card
Installing the SIM Card and Battery
If you want to use the telephone features of the device, you must install a valid SIM card.
Unlock and remove the battery cover.
Place the SIM card with the gold contact facing down.
NOTE: When removing the SIM card, pull out the tray which fixes the SIM card, and then remove the
SIM card from the tray.
Reinsert the battery. Push the opposite end of the battery until it snaps into place.
Replace the back cover. Press the back cover until it snaps into place.
NOTE: The device is supplied with a rechargeable Li‐ion polymer battery. This battery is supplied
completely discharged and should be charged for at least 8 hours before first use. Please follow the
normal turn‐off procedure to remove the battery; otherwise unsaved data may be lost.
Installing a MicroSD Card
Use a certified MicroSD card in this slot to expand the device’s storage memory (SDHC supported). To
install the MicroSD card, do the following:
1.
2.
Unlock and remove the back cover.
Remove the media card slot cover.
10
3.
Insert the media card into the slot logo side up.
To remove the MicroSD card, gently press in on the card to eject.
NOTE: Inserting the MicroSD card in the wrong direction by force can cause damage to the card and the
card slot.
1.4 Battery Information
Battery performance depends on many factors, including your wireless service provider’s network
configuration, signal strength, the temperature of the environment in which you operate your phone,
the features and settings you select and use, items attached to your phone’s connecting ports, and your
voice, data, and other program usage patterns.
Battery life estimates (approximations subject to network conditions):
 Talk time(GSM): 4 hours
 Standby time(GSM): 200 hours
Charge Time (average):
 Charge by AC adaptor: 3 hours
 Charge by USB bus: 5 hours
Reducing Risk of Fire or Burns





Do not attempt to open, disassemble or service the battery pack.
Do not crush or puncture the battery, short the external contacts or dispose of in fire or
water.
Do not expose to temperatures above 45˚C (113˚F) or below ‐10˚C (14˚F).
Replace only with the battery pack designated for this product.
Recycle or dispose of used batteries as stipulated by local regulation and in a manner that
respects the environment.
Checking the Battery Power
Select StartSettingsSystem tabPower.
11
Optimizing Power Performance
Select StartSettings System tabPowerAdvanced and then adjust settings.
Managing a Low Battery
When the low‐battery warning appears, do the following:
1. Turn off Bluetooth and/or WiFi if they are currently enabled.
2. Immediately save your current data.
3. Plug in or turn off the device.
Charging the Battery
1.
2.
To charge the battery, make sure the battery is sitting in the battery slot correctly.
Do one of the following:
 Connect the device to the AC adapter and plug the AC adapter into a power outlet.
 Connect the device to a PC with the USB cable (supplied with the device).
NOTE: To charge the device with the USB cable, you must connect the device to a functioning USB port
on a PC that is powered on.
IMPORTANT: For safety reasons, charging will not occur at temperatures below 0˚C/32˚F or above
40˚C/104˚F.
12
Chapter 2: Basic Operations
2.1 Getting Started
Turning On/Off the Device
a) When the device is off: push the power slider at the top of the device to the right to turn on the
device.
b) When the device is turned on: push the power slider to the right to switch the device into sleep
mode. You can still receive phone calls and messages when the device is in sleep mode.
c) When the device is in sleep mode: push the power slider to the right.
d) To power off the device completely, push the power slider to the right and hold for 3 seconds
and the system will ask you to confirm before powering off the device.
Calibrating the device
Calibrating the device ensures that the system will respond to your on‐screen touch interactions in the
correctly. When you turn on the device for the first of time, you will be asked to calibrate the device. If
you would like to re‐calibrate the device, follow the steps below:
1. Select StartSettingsSystem tabScreen.
2. Select the Align Screen button and follow the on‐screen instructions.
13
2.2 Today Screen
Today Screen
The Today screen is your home screen. It displays system status and shows you the time and weather in
the city that you select.
Status Bar
Location
Softkeys
NOTE: You can access the Today screen by bringing up the Velocity toolbar and selecting the Today icon,
or by selecting StartToday or by pressing the END button.
14
Status Bar Notification Icons
New e‐mail
Roaming
New Text (SMS) or Multimedia (MMS)
message
New Voicemail message
Bluetooth headset detected
Ringer on
New notifications
Ringer off
New instant message
Ringer in vibration mode
Voice call
HSPA available
Voice call in progress
HSPA in use
Calls are being forwarded
GPRS available
Call on hold
GPRS in use
Missed call
EDGE available
Battery full
EDGE in use
Low battery
No SIM card installed
Battery alert
Bluetooth connection in progress
Extremely low battery
Wi‐Fi connection in progress
Battery charging
Data Connection is active
Signal strength
Connection is not active
No signal
Synchronization in progress
Flight mode
Synchronization error
No service
Alarm
15
Location
Location allows you to see the time and weather in cities that are important to you right from your
home screen.
Adding Locations
You can add locations through the location settings. To access the location settings, press and hold on
the location information panel on your home screen. Select Add a City, you can then enter a city directly
or locate nearby cities via GPS.
Switching Locations
If you have more than one location, you can switch the location by sliding your finger left or right on the
location panel.
2.3 VOTA (Velocity Over the Air)
VOTA (Velocity Over the Air) is an over‐the‐air updates system that uses your devices data connection to
download and install software upgrades and new features. VOTA will automatically install the necessary
files and clean up the installation files at the end of the update process.
Installing a VOTA (Velocity Over the Air) Update
1.
2.
3.
4.
5.
6.
A message will appear informing you that a VOTA update is available. Select Install.
For verification, select Install to continue.
VOTA will begin downloading the installation files.
VOTA will begin the install after the installation files have been downloaded.
VOTA will clean up the installation files after the install is complete.
The installation is now complete. Select Close to exit.
16
2.4 Velocity Toolbar
The Velocity toolbar allows you to:
 Create a customized, quick access tool to applications you prefer.
 Close open applications.
To launch the toolbar, press the Velocity button on the side of the device or swipe your fingertip from
the Velocity logo below the screen toward the middle of the screen.
Velocity Button
To customize the toolbar, press and hold the Velocity button to show all applications first. Press and
hold a program icon and then drag it in order to add/remove it to/from the toolbar.
2.5 Start Menu
The Start menu is accessible by selecting the Start button at the top left of the screen and is divided into
4 main functions as follow:
Recently used applications
Today screen
Primary applications
More applications and Help information
17
2.6 Programs, Settings and Icons
Programs
Games
Two games are installed on the device: Bubble Breaker and Solitaire.
ActiveSync
Synchronize information between the device and a PC or Exchange Server.
Auto Config
Select your mobile operator manually and automatically apply the correct data settings
for that operator.
Calculator
Perform basic calculations such as addition, subtraction, multiplication and division.
File Explorer
Organize and manage the files and folders on the device.
Getting Started
Brief introductions and shortcuts of common used items.
Internet Sharing
Use the device as an external modem for a PC, connecting through a USB port or
Bluetooth.
JETCET PDF 5
View PDFs on the device.
Messenger
Send and receive instant messages with your Windows Live Messenger contacts.
MIDlet Manager
Install Java applications from local files or a network.
Modem Link
Share the device connection with a PC or laptop.
Notes
Take notes on the device.
Phone Profile
Create and set profiles.
Pictures & Videos
Organize and share pictures and videos.
Remote Desktop
Mobile
Create a connection between the devices and a Window Terminal Server.
Search
Search the device.
SIM Manager
Lets you manage your SIM card. See “5.5 Using SIM Manager” for details.
Sim Toolkit
A software toolkit that comes with the SIM card. The functionality of this toolkit
depends on your SIM card provider.
Task Manager
Manage currently running programs.
Tasks
Create, edit and synchronize tasks.
Unit Converter
Convert commonly used measurements.
VCamera
Take pictures and videos.
Windows Live
Access Spaces, Instant Messenger and Windows Live services.
Windows Media
Play music and video.
Wireless Manager
Turn on/off wireless, Bluetooth and phone features.
18
Settings
Personal
Buttons
Configure button actions.
Input
Configure input methods.
Lock
Set a password to unlock the device.
Menus
Configure the Start menu.
Owner Information
Enter and edit owner information.
Phone
Configure the Phone features.
Sounds &
Notifications
Configure program and event sounds.
Today
Configure the Today screen items and theme, including the background wall‐paper and
device color‐scheme.
About
Windows Mobile information and device name.
Backlight
Configure the display backlight and adjust the brightness of display and keypad.
Certificates
Manage personal and root certificates.
Clock & Alarms
Set time and alarms.
Customer Feedback
Send volunteered, non‐personal information about how you use Windows Mobile
software to Microsoft.
Device Information
Display information about device system, software and hardware.
Encryption
Encrypt files as they are placed on a storage card.
Error Reporting
Enable or disables the in‐built error reporting system.
External GPS
Let you define the ports used for GPS configuration.
Factory Reset
Reset all settings to the manufacturer defaults.
Managed Programs
List programs that have been installed remotely by your system administrator.
Memory
Check available device memory and memory card information.
Power
Power management settings.
Regional Settings
Configure the device’s locale.
Remove Programs
Allow you to view and remove installed applications.
Screen
Let you align the screen. See “Calibrating the device” in Chapter 2 for details.
Task Manager
Help you to manage currently running programs.
TV‐OUT Config
Select your TV output type here.
Windows Update
Let you download Windows Mobile updates such as critical security fixes.
System
19
Connections
Beam
Turn on/off the beam feature.
Bluetooth
Configure Bluetooth settings. See “8.3 Using Bluetooth” for details.
Connections
Configure the device’s connections.
Domain Enroll
Allow you to connect the device with company resources.
Network Cards
USB Connection
Wi-Fi Network
Wireless Manager
Configure the network adapter. When connecting to Wi‐Fi, you can configure wireless
networks here as well.
You can set your device to synchronize with a PC or function as a card reader when it is
connected to your PC through the USB port.
Display detailed information for a connected Wi‐Fi Network. You can change Wi‐Fi
Network settings here as well.
Turn on/off wireless, Bluetooth and phone features.
2.7 Input Methods
The device contains 4 software input methods: keyboard, Letter Recognizer, Block Recognizer and
Transcriber.
Keyboard
Letter/Block Recognizer
Transcriber
Keyboard
1.
2.
Select the keyboard icon
in the center of the bottom menu bar to launch the keyboard. If
the keyboard is not the selected input method, select the arrow next to the keyboard icon
and select Keyboard.
Select the keys on the on‐screen keyboard to enter text or do any of the following:

Select
on the on‐screen keyboard to enter capital letters.

Select
on the on‐screen keyboard to enter accented letters.

Select
on the on‐screen keyboard to enter symbols and numbers.
Letter Recognizer
Letter Recognizer recognizes one letter, number or symbol at a time.
20




To launch Letter Recognizer, select the input method selector arrow (the upward arrow
next to the input method icon) and select Letter Recognizer.
Write uppercase letters in the left recognition area (the ABC box).
Write lowercase letters in the middle recognition area (the abc box).
Write numbers and symbols in the right recognition area (the 123 box).
Block Recognizer
Block Recognizer recognizes letters written in one stroke.
 To launch Block Recognizer, select the input method selector arrow (the upward arrow
next to the input method icon) and select Block Recognizer.
 Write lowercase letters in the text recognition area (the abc box on the left).
 Write numbers and symbols in the numeric recognition area (the 123 box on the right).
 To input symbols, select any recognition area, text or numeric, once and write symbols.
NOTE: Select ? in Letter or Block Recognizer to see a demo on how to write recognizable characters.
Transcriber
Transcriber recognizes handwriting in cursive and/or print. It uses the full screen as its recognition area.
It interprets the movement of the stylus on the screen as you write.
 To launch Transcriber, select the input method selector arrow (the up arrow next to the input
method icon) and select Transcriber.
 Write anywhere on the screen.
NOTE: The Transcriber comes with detailed help pages. Select
21
if you need further assistance.
Hardware Keyboard
Other than the on‐screen keyboard, this device is equipped with a QWERTY keyboard. Please see below
for tips of using the QWERTY keypad.
Press this key to erase the letter to
the immediate left of the cursor.
Press the “FN” key once and then
press this key to delete the first
letter on the right side of the
cursor. To delete letters constantly,
hold down the “FN” key and press
this key at the same time.
(1) Press this key once ( ),
the first letter you enter
will be capitalized.
(2) Pressing this key twice
( ), all letters you enter
will be capitalized.
(3) Hold down this key and
press another key at the
same time to enter capital
letters constantly.
In
mode, press this key again
to enter lower case letters.
The “FN” key is used to access the symbols and numbers on the
keypad. You can choose any of the three methods to input
symbols/numbers:
(1) Press the “FN” key once (
symbol or number.
), the next character you enter will be a
(2) Press the “FN” key twice ( ), you can then enter numbers and
symbols constantly.
(3) Hold down the “FN” key and press another key at the same time to
enter its corresponding symbol.
To return to enter letters, press the “FN” key again in
Corresponding letters/symbols for each character:
àáâäåæãąă
ÀÁÂÄÅÆÃĄĂ
çćĉ©
ÇĆĈ©
ð
Đ
èéêëę
ÈÉÊËĘ
ìíîïĩij
ÌÍÎÏĨIJ
ł
Ł
ñ
Ñ
òóôõöőøœ
mode.
22
ÒÓÔÕÖŐØŒ
þ¶
Þ¶
®
®
ßşš
ߪŠ
ț
Ț
ùúûüűũµ
ÙÚÛÜŰŨµ
ý
Ý
źż
ŹŻ
You can input symbols and
accented letters by using this key.
After pressing a character, press
the “SYM” key repeatedly, you can
see all accent types of this
character being displayed in
sequence cyclically. Stop pressing
the “SYM” key while the desired
character shows. Please refer to the
table below for corresponding
symbols and accented letters for
each character.
Chapter 3: Synchronizing Information
ActiveSync and Windows Mobile Device Center (WMDC) synchronize information on the device with
information on your PC or Exchange server. ActiveSync works on computers that have the Windows XP
Operating systems while WMCD works on computers that have Windows Vista.
Specifically, you can use ActiveSync or WMCD to:
 Synchronize Outlook e‐mail, contacts, calendar or tasks on your phone with your PC.
 Synchronize pictures, video and music between the device and your PC.
 Synchronize Outlook e‐mail, contacts, calendar appointments and tasks on your phone
directly with Exchange Server.
 Copy files between your phone and your PC without synchronizing.
 Select which types of information are synchronized and specify how much information is
synchronized. For example, you can choose how many weeks of past calendar appointments
to synchronize.
3.1 Installing and Setting up ActiveSync
IMPORTANT: Be sure to install ActiveSync on the PC before connecting the device to it.
1.
2.
3.
Install ActiveSync on your PC, as described on the Windows Mobile™ Getting Started Disc.
After setup completes, the Synchronization Setup Wizard automatically starts when you
connect the device to the PC (through a USB cable or Bluetooth).
Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard, you
can:
 Create a synchronization relationship between your PC and the device.
 Configure an Exchange Server connection to synchronize directly with Exchange Server.
To synchronize the device with Exchange Server, obtain the name of the Exchange Server,
your user name, password and domain name from your administrator before completing
the wizard.
 Choose information types to synchronize.
Once synchronization completes, you can disconnect your phone from your PC.
3.2 Installing and Setting up WMDC
The Windows Vista operating system includes the basic WMDC application partially installed, you can
fully install WMDC on your computer from the Getting Started Disc.
1. Follow the instruction on the Windows Mobile™ Getting Started Disc to install WMCD on your
PC.
2. Connect the device to your PC, WMDC will start automatically.
3. Do either of the following on the home screen of WMDC:
 Click Set up your device to select items that your want to synchronize. WMDC
synchronizes the device automatically when you finish the set up.
 Click Connect without setting up your device to transfer files, check updates or explore
the device without synchronizing Outlook information.
23
3.3 Synchronizing Information
Starting and Stopping Synchronization Manually
1.
2.
3.
On the device, select StartProgramsActiveSync.
To start synchronization, select Sync.
To stop synchronizing, select Stop.
IMPORTANT: You can start and stop synchronization only if the device already has a sync relationship
with a PC or Exchange Server. Some Anti‐Virus software may conflict with ActiveSync.
Changing Information is Synchronized
ActiveSync and WMDC synchronize a limited amount of information by default to save storage space on
your phone. You can change the amount of information that is synchronized by performing the following
steps.
1. On the Today screen, click StartPrograms ActiveSync.
2. Select MenuOptions.
3. Do one or more of the following:
 Select the checkbox for the items you want to synchronize. If you cannot select a
checkbox, you might have to clear the checkbox for the same information type elsewhere
in the list.
 Clear the checkbox for any items you want to exclude.
 To customize synchronization of a computer, select the computer name and then click
Settings.
 To customize synchronization of particular information, select the information type and
then click Settings.
 To stop synchronizing with one computer completely, select the computer name and click
Delete.
IMPORTANT: Outlook e‐mail can be synchronized with only one computer and one Exchange ActiveSync
server.
3.4 Changing Settings for an Information Type
IMPORTANT: Before changing settings for an information type on the device, disconnect the device
from your PC.
1.
2.
3.
4.
5.
Select StartProgramsActiveSyncMenuOptions.
Select one of the information types (e.g. E‐mail, Tasks or Calendar items).
Do one of the following:
 To view or change settings for an information type (when available), select Settings.
 To view or change settings for a computer or Exchange Server, select Settings.
Change the amount of information to be synchronized or other settings.
Select OK (or Finish in the Exchange Server settings wizard).
24
3.5 Synchronizing with Exchange Server
To set up the device to synchronize directly with Exchange Server, you will need to get the name of the
server and the server domain name from your service provider or system administrator. You must also
know your Exchange user name and password.
1.
2.
3.
4.
5.
6.
7.
8.
On the device screen, select StartProgramsActiveSyncMenuConfigure Server. If you
have not yet set up synchronization with Exchange Server, this menu item will say Add Server
Source.
Enter your Email address and then tap Next.
Enter your user name, password, and domain name, then select Next. If you want the device
to save your password so that you will not need to enter it on each connection, select the Save
password checkbox.
In Server address, enter the name of the server running Exchange Server, then select Next.
Select This server requires an encrypted (SSL) connection if you want to receive personal
information more securely. However, if you select option this and your ISP does not support an
SSL connection, you will be unable to receive e‐mail.
Select the checkboxes for the types of information items that you want to synchronize with
Exchange Server.
To change available synchronization settings, select the type of information and select Settings.
To change the rules for resolving synchronization conflicts, select MenuAdvanced.
Tap Finish.
NOTE: You can also use ActiveSync or WMDC to set up the device to synchronize remotely with the
Exchange Server. The set up wizard is started when you connect the device to your PC after installing
ActiveSync or WMCD on the PC.
3.6 Synchronizing via Bluetooth
Connecting to a PC Using Bluetooth
1.
2.
3.
4.
5.
6.
7.
Your PC must be equipped with a suitable Bluetooth radio.
Follow the instructions in ActiveSync Help on the PC for configuring Bluetooth on your PC to
support ActiveSync.
On the device, select StartProgramsActiveSync.
Select MenuConnect via Bluetooth. Ensure that the device and PC are within close range.
If this is the first time you have connected to this PC via Bluetooth, you must complete the
Bluetooth wizard on the phone and set up a Bluetooth partnership with the PC before
synchronizing. This process will typically involve exchanging a pass‐key between the device and
the PC.
Select Sync.
When finished, select MenuDisconnect Bluetooth.
NOTE: To preserve battery power, turn off Bluetooth after the synchronization is completed.
25
Chapter 4: Phone
4.1 Making a Call
The Phone Screen
From the phone screen, you can see dial records and Contacts and choose to make a video or voice call.
To access the Phone Screen, do any of the following:
 Press the SEND hardware button.
 Select Phone on the Today screen.
 Select Start Phone.
Smart Dial Area
Backspace
Call History
Video Call
Voice Call
Making a Call by Using the Phone Keypad
1.
2.
3.
On the Phone screen, select Keypad if the keypad is not displayed.
Enter the number to dial using the keypad.
Select matching contacts that come up in the smart dial area to dial that number and/or
contact or finish entering the number and press
video call.
26
to make a voice call or
to make a
Making a Call from Call History
1.
2.
On the Phone screen, select
to display call history full screen.
Scroll to the desired number or contact. Press TALK to make a voice call; select
MenuVideo call to make a video call.
Making a Call from Contacts
Do either of the following to make a call from Contacts:
 Voice Call. On the Phone Screen, select Hide Keypad to show all Contacts on the smart dial
area. Tap on the desired contact in the list and then tap on the number you want to dial.
 Video Call. Select Contacts on the Today screen, scroll to the desired contact, select
MenuVideo call.
Making a Call from Speed Dial
You can create speed dial entries for frequently called numbers or frequently accessed items. Speed Dial
allows you to dial a number by pressing a single key. For example, if you assign location 2 to a contact in
Speed Dial, you can simply press and hold 2 on the Phone Keypad to dial the contact’s number. Speed
dials can be created only for numbers that are stored in Contacts.
On the Phone screen, do either of the following:
 Select MenuSpeed Dial. Scroll to the desired contact and press TALK to make a voice call;
select MenuVideo call to make a video call.
 Select Hide Keypad to show speed dial entries on the smart dial area. Scroll to the number
and then press TALK.
To create a speed dial entry for a contact
1.
2.
3.
4.
5.
6.
Tap Contacts on the Today screen.
Tap the contact for whom to create a speed dial.
Scroll to the phone number (if there is more than one) for which to create a speed dial.
Select MenuAdd to Speed Dial.
In Location, select the speed dial number to use.
Select OK when finished.
NOTE: The first speed dial location is generally reserved for your voice mail. Speed Dial uses the next
available location by default. If you want to place a number in a location that is already used, the new
number replaces the existing number.
To delete a speed dial entry
1.
2.
3.
On the Phone screen, select Hide Keypad.
Select the entry that you want to delete.
Select Delete.
27
Receiving/Rejecting a Call
When you receive a phone call, you have the option to answer it or ignore it.
 To accept an incoming call, select Answer on the screen or press TALK to accept an incoming
call.
 To hang up a call, select Ignore on the screen or press END.
NOTE: To adjust the earpiece volume during a call, press the volume up/down button on the phone side
panel. Adjusting the volume at any other time to change sound levels for the phone ringer, system
notifications and music.
You can mute the volume of incoming calls by pressing and holding the volume down button.
4.2 Configuring the Phone
Your wireless service provider may provide useful services such as Call Barring, Caller ID, Call Forwarding,
Call Waiting, Voice Mail and Text Messages and Fixed Dialing. You can view and edit these settings from
the Network.
Activating PIN Security
Most Subscriber Identity Module (SIM) cards are preset with a personal identification number (PIN) that
is provided by your wireless service provider. When PIN Security is activated, you need to enter the PIN
whenever you use your phone.
1. Select StartSettingsPhoneRequire PIN when phone is used.
2. Enter the preset PIN provided by your wireless service provider.
3. Select Enter.
NOTE: If your PIN is entered incorrectly three times, the SIM card will be blocked. If this happens, you
can unblock it with the PIN Unblocking Key (PUK) obtained from your wireless service provider.
Changing the Ring Type and Ring Tone
You can choose how to be notified for incoming calls.
1. Select StartSettingsPhone.
2. In the Ring type list, select the desired option.
3. In the Ring tone list, select the sound you want to use.
4. Select OK.
Changing the Ringer Volume
You can press volume up and down on the left side of the device to change the ringer volume or do the
following:
1. Select the volume icon in the status bar on the screen.
2. Do one of the following:
 Move the slider to the desired volume level.
 Select On, Vibrate or Off to quickly change both the ringer and system and settings.
28
Blocking Incoming or Outgoing Calls
1.
2.
Select StartSettingsPhoneServices tab.
Select Call BarringGet Settings.
3.
Choose the calls you want to block, and select OK.
 Block incoming calls: All calls, When roaming, Off.
 Block outgoing calls: All calls, International, International except to home country, Off.
Displaying Caller ID
You can provide a way for people to see your number when you are calling them.
1. Select StartSettingsPhoneServices tab.
2. Select Caller IDGet Settings.
3. Select Everyone, No one or Only to contact.
Call Waiting
When you are in another call, you will be notified of an incoming call if this option is selected.
1. Select StartSettingsPhoneServices tab Call WaitingGet Settings.
2. Select Notify me or Do not notify me, then select OK.
NOTE: Another way of changing phone settings is to select MenuOptionsServices from the Phone
keypad.
Time Update
You can have the device update the time zone and clock automatically when it connects to a wireless
service provider’s network. (Not all service providers support this function, please contact your service
provider for details.)
 Select StartSettingsPhoneTime Update tab, then select Update time zone and clock
automatically (NITZ).
29
4.3 Voice Call In‐Call Options
The device provides various options for managing multiple calls at the same time. You are notified when
you have another incoming call, and you have the choice of ignoring or accepting the call. If you are
already on a call and accept the new call, you can choose to switch between the two callers or set up a
conference call between all three parties.
Speaker On/Off
Mute/Unmute
End Call
Note
Hold
Contact
Answering a Second Call
1.
2.
Select Answer to take the second call and put the first call on hold.
To switch between two calls, tap MenuSwap.
3.
To end the second call and return to the first call, select
hardware button.
on the screen or press the END
Conference Call
1.
Either put a call on hold and dial a second number or accept a second incoming call when you
have one in progress. (To dial a second number, tap
on the screen to put the first phone on
2.
or Keypad to dial a second number.)
hold and then tap
Tap MenuConference.
3.
To end the second call and return to the first call, select
on the screen or press END.
NOTE: If the conference conneciton is successful, the word “conference” will appear at the top of the
screen. Not all service providers support confernec calling. Contact your service provider for details.
Muting the Microphone
The device’s microphone can be turned off during a call. If you turn off the microphone, the caller
cannot hear you. However, you can still hear the caller.
 Select Mute during a call to turn the microphone off.
30

Select Unmute to turn the microphone on.
4.4 Video Call In‐Call Options
When in a video call, you can see yourself and the person you are talking to showing on the screen at
the same time. During the call, you can choose to turn off the camera or switch between the forward
facing camera and the main camera.
You
Other person
Camera On/Off
Mute/Unmute
Switch Camera
End Call
Switch Window
Brightness
Changing Settings

Turn off camera. The left window plays the local captured video from the camera on the
device, to turn off this camera, select
from the other side.
on the screen. You can still see the captured video

Switch camera. To switch between the forward facing or main cameras, select
screen.

Switch Window. To switch the size of preview window and remote window, select
screen.

on the screen to adjust the brightness; there are four levels for
Brightness. Select
brightness.
Night Mode. During a call, select MenuNight Mode On/Off to switch between night mode
and normal mode.
Hands‐free. If you use Bluetooth headset, select MenuTurn Hands‐free On/Off to switch
between speaker and headset.


on the
on the
Video Call Options
You can show a still image while turning off the camera and assign a ringtone for video call.
1. Select MenuVideo Call Options on the Phone screen.
2. In Default video setting, select the image that you want to display when you
turn off the camera.
31
3.
4.
If you select User define, tap the text box under File to view available pictures
and then select one.
In Video call ringtone, assign a ringtone in the drop‐down list.
32
Chapter 5: Contacts & Messaging
5.1 Using Contacts
In Contacts you can store phone numbers, e‐mail addresses, home addresses and any other information
that relates to a contact (such as a birthday or an anniversary date). You can also add a picture or assign
a specific ring tone to a contact.
You can quickly communicate with people using the contact list. Click a contact in the list for a summary
of contact information and available communication methods. This summary page will allow you to call
or send a message, depending on the information available for that contact.
If you use Outlook on your PC, you can synchronize contacts between your phone and PC.
Creating a New Contact
1.
2.
3.
4.
Do any of the following:
 Select StartContactsNew.
 Select Contacts on the Today screen New.
Select Outlook Contact.
Enter information for the new contact.
Select OK.
NOTE: If someone who isn't in your list of contacts calls you or sends you a message, you can create a
contact from Call History or from the message by selecting MenuSave to Contacts.
To save an existing contact to your SIM card, open the contact, select MenuSave to SIM.
Viewing and Editing Contact Information
1.
2.
3.
4.
5.
Select StartContacts or select Contacts on the Today screen.
Select the contact whose information you want to view.
To edit the information, select MenuEdit.
Do any of the following:
 Select Picture and select a picture you want to add. This can be an existing picture, or you
can take a new picture using the camera program.
 Select Ring Tone and select the ring tone you want to use for this contact. This will allow
you to know who is calling without having to look at the screen.
 Select Categories and select one of the options or create a new category.
When finished making changes, select OK.
Sending an E‐mail to a Contact
1.
2.
3.
4.
Select StartContacts on the Today screen.
Select the contact from the list.
Select the e‐mail account to use.
Enter a subject, compose your message, then select Send.
33
Sending a Text Message to a Contact
1.
2.
3.
Select StartContacts or select Contacts on the Today screen.
Select the contact you want to send a text message to, then select Send text message.
Compose your message then press Send.
Creating a SIM Contact
Contacts can be created and stored on a subscriber identity module (SIM). If you move the SIM to
another phone, your SIM contacts are moved as well.
1. Select StartContactsNew. Alternatively, select Contacts on the Today screen and then
select New.
2. Select SIM Contact.
3. Enter the name and phone number of the contact then select OK.
5.2 Text Messaging
Creating a Text Message
1.
2.
3.
4.
Select Start MessagingText Messages.
Select MenuNew.
Enter the recipient’s text message number in the To field. Insert a semicolon (;) between
multiple text message numbers.
Enter your message and select Send. Depending on phone signal, text messages will be sent
immediately.
NOTE: You can quickly enter text message numbers from your contact cards. In the To field, press ENTER
and select a recipient from the list. Then select the recipient’s phone number.
You can request a delivery notification for the text message. Select MenuMessage OptionsRequest
message delivery notification.
Using Preset Text Messages
You can quickly insert preset or frequently used messages into your text message. While composing a
message, select MenuMy Text and then add a preset message to insert.
Reading a Text Message
1.
2.
Select StartMessagingText Messages.
Select Inbox ▼, then select Inbox under Text Messages.
34
3.
In the message list, select the text message you want to read.
5.3 Multimedia Messaging Service
Creating and sending Multimedia Message Service (MMS) messages to your friends and family is fun and
easy. You can include text as well as existing or newly captured photos, video clips or audio before
sending your MMS.
MMS messages can be broken up into various slides, where each of the slides can be any combination of
audio or video clip, an image and/or text.
Composing a MMS Message
1.
2.
3.
4.
5.
Select StartMessagingMMS.
Select MenuNew.
Enter the recipient addresses in the To, Cc, and/or Bcc fields. Insert a semicolon between
multiple addresses.
In Subject, enter a subject.
To create a slide, do any combination of the following:
 Select Insert Picture/Video and select a picture or video clip (or snap or record a new
one).
35
6.


Select Insert Audio and select an audio clip.
Select Insert Text and enter a message.

Select MenuInsertSound Recorder, then select the RECORD button (
) to record a
new audio clip. Select STOP ( ) button to stop recording.
 Select MenuOptionsBackground Color, select a background color for the slide.
Select Send.
NOTE: After the first slide is filled with content, you can select MenuSlidesInsert to add another
slide to your MMS message.
Previewing a MMS Message
You can preview an MMS message before sending it.
1. To preview your MMS message after composing it but before sending it, select
MenuPreview.
2. Select Done or Replay to dismiss or repeat the preview.
Reading a MMS Message
1.
2.
3.
Select StartMessaging.
Make sure the folder drop‐down list says Inbox▼. If it doesn’t, select the folder drop‐down list
and select Inbox under MMS.
In the message list, select the MMS message you want to read.
Configuring MMS Settings
MMS settings are typically a combination of user preferences and network operator settings. You will
need to consult your network operator for details on the MMS settings specific to the network.
1. Select StartMessagingMMS.
2. Select MenuMMS Settings.
3. Select the type of options to change.
4. Select OK.
5.4 E‐mail
Setting up an E‐mail Account
Before you set up your Internet e‐mail account, please ensure that you have the necessary information
from your e‐mail service provider. The kind of information you’ll need to have ready is tabulated below.
Use this as a check‐list before proceeding with the account set‐up.
Setting
Description
User name
Usually the first part of your e‐mail address, which appears before the “at” sign (@). For some e‐
mail service providers, the full e‐mail address is used as the user name.
Choose a strong password. You will have the option to save your password, so that you do not
need to enter it each time you connect to your e‐mail server.
The domain name. This may not always be required.
The type of e‐mail server that hosts your mailbox (POP3 or IMAP4).
A friendly name for this account (e.g. “My Webmail”). You must use a different name for each
Password
Domain
Server type
Account name
36
Network
Incoming mail server
Require SSL connection
Outgoing mail server
Outgoing server requires
authentication
Outgoing server settings
Use different user name
for outgoing server
User name
Password
Domain
Require SSL connection
(Outgoing mail server
only)
account that you set up.
The type of network your e‐mail server connects to (e.g. Work or The Internet).
The name of your e‐mail server (POP3 or IMAP4).
Select this to ensure you always receive e‐mail for this account using an SSL connection. This
enables you to receive personal information more securely. Please note that if you select this and
your ISP does not support an SSL connection, you will not be able to connect to receive e‐mail.
The name of your outgoing e‐mail server (SMTP).
Your outgoing e‐mail server (SMTP) may require authentication. Note: unless otherwise specified
in the next section, your previously given user name and password will be used for authenticating
against the outgoing e‐mail server.
Your outgoing e‐mail server may require different authentication settings than your incoming e‐
mail server.
A checkbox that lets you enter separate settings for your outgoing e‐mail server.
Your user name for the outgoing e‐mail server.
Your password for the outgoing e‐mail server.
The domain name of the outgoing e‐mail server.
A connection that enables you to send personal information more securely. Note that if you select
this and your ISP does not support an SSL connection, you will not be able to send e‐mail.
Now you are ready to set up your account:
1. Select StartMessagingSetup E‐mail.
2. Enter your e‐mail address and password. Select Save password if you want, or you can enter
the password each time you send and receive e‐mail. Then select Next.
3. Select Next. If the device is connected to the internet, the Auto Setup feature will attempt to
retrieve settings for this e‐mail account, saving you the effort of typing in all the required
settings. If no matching settings are found (or if no internet connection exists), then you will
need to enter each setting manually.
4. Enter the name you want to appear when you send messages, then select Next.
5. In Automatic Send/Receive, select a frequency for sending/receiving e‐mail. Please note that
data charges will probably be incurred if you send and receive e‐mail outside of Wi‐Fi or
Bluetooth range. Select Review all download settings to change your e‐mail settings;
otherwise, select Finish to start downloading messages.
NOTE: To change options for an e‐mail account, select StartMessagingMenuOptions and then
select the type of options to change.
IMPORTANT: If you save your password and then lose your phone, someone finding your phone might
be able to gain access to your e‐mail.
Composing an E‐mail Message
1.
2.
3.
4.
5.
6.
Select StartMessaging.
Select an e‐mail account to use.
Select MenuNew. This will bring up a new e‐mail form.
Enter recipient e‐mail addresses in the To, Cc and/or Bcc fields as necessary. Insert a semicolon
(;) between multiple addresses.
In the Subject field, type in a subject.
Enter a message.
37
7.
Select Send. E‐mail messages are stored in Outbox and are sent to recipients the next time you
synchronize or connect to your e‐mail server and send and receive mail.
NOTE: You can quickly enter e‐mail addresses from your contact cards. In the To field, press ENTER and
select a recipient from the list. Then, select the recipient’s e‐mail address.
To change message settings such as its priority, select MenuMessage Option in the message you are
editing. Select the type of options to change and then Select OK.
Reading an E‐mail Message
1.
2.
3.
Select StartMessaging, select an e‐mail account.
Make sure the folder drop‐down menu says Inbox▼. If it doesn’t, select the drop‐down menu
and select Inbox under this e‐mail account.
In the e‐mail list, select the e‐mail message you want to read.
NOTE: Unread e‐mails are normally listed in the Messaging item on the Today screen. You can access
unread e‐mails directly by selecting the Messaging item on the Today screen.
5.5 Using SIM Manager
The SIM Manager allows you to manage the phonebook in your SIM card. Using the SIM Manager, you
can easily transfer phonebook entries from your SIM card to Contacts.
Adding a Phonebook Entry to the SIM Card
Please note that SIM card contacts can store far less information than Outlook contacts. There is a
restriction on the length of the contact name, you can only have one number per contact.
1. Select StartProgramsSIM Manager.
2. Select New and enter the name and phone number you want to add.
3. Select the Add button.
Deleting a Phonebook Entry from the SIM Card
1.
2.
3.
Select StartProgramsSIM Manager.
Select an entry you want to delete and tap MenuDelete.
Select Yes to confirm that you want to delete the contact.
Saving Phonebook Entries to Contacts
1.
2.
3.
4.
Select StartProgramsSIM Manager.
Select the entries that you want to save to Contacts by checking the checkboxes in front. Select
MenuCheck All if you want to select all entries.
Select MenuSave to Contacts.
Select OK to close the notification dialog box.
38
Saving Contacts to SIM Card
1.
2.
3.
4.
5.
Select StartProgramsSIM Manager.
Select MenuContacts to SIM.
Select the phone type(s) from the Outlook Contacts and then select OK.
Select the contacts you want to save to SIM card by checking the checkboxes in front. Select
MenuCheck All if you want to select all contacts.
Select Save.
NOTE: One SIM card entry can only store one phone nubmer, if you select more than one phone type
from the Outlook Contacts (e.g. Work tel and Mobile tel), SIM Manager will creat different entries
seperately for the same contact and mark the entries with a phone type abbreviation (e.g. Chris/WT and
Chirs/MT).
39
Chapter 6: Basic Applications
6.1 Using Calendar
Use the Calendar application to schedule appointments, including meetings and other events. Your
appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can
synchronize appointments between the device and PC. You can also set Calendar to remind you of
appointments with an audible alarm or flashing light.
You can look at your appointments in several different views (Day, Week, Month, Year and Agenda). To
see detailed appointment information in any view, select the appointment.
Making an Appointment
1.
2.
3.
4.
Select StartCalendar. Alternatively, you can select the appointment item on the Today
Screen.
Select MenuNew Appointment.
Enter information about the appointment.
Select OK to save the appointment.
NOTE: If you make this appointment as an all‐day event, it will not occupy blocks of time in Calendar;
instead, it will appear in banners at the top of the Calendar view.
You can assign a category to an appointment or create a new category for it.
Deleting an Appointment
1.
2.
3.
4.
Select StartCalendar.
In Agenda/Day/Week view, select the appointment to delete.
Select MenuDelete Appointment.
If the appointment is recurring, select All to delete the series or select One to delete only the
current occurrence.
NOTE: When you delete an appointment in Calendar on your phone, it is also deleted on your PC the
next time you synchronize. If the appointment has not been synchronized with a PC, it will be deleted
only from the phone.
Changing Calendar Views
You can look at your appointments in Agenda, Day, Week, Month or Year view. To see detailed
appointment information in any view, select the appointment. To see a list of available actions for an
appointment, select and hold the appointment.
1. Select StartCalendar.
2. Select MenuView, then select the view you want. You can view your calendar in the
following layouts:
 Today’s agenda: your current day’s activities at a glance. Upcoming appoints appear in
bold text; past appointments are dimmed.
40



Appointment for the week: your schedule for the whole week.
Agenda for a specific date: your schedule for a single day in a day‐planner layout. Free
and busy period are shown in time slots of 1/2 hour or 1 hour.
Appointment for the month: your free and booked days for a month. indicates there
is a morning appointment; indicates there is a afternoon appointment; indicates
there are both morning and afternoon appointments; indicates there is a all‐day
event.
NOTE: In Month view, a date will appear in red when the Holiday category is assigned to any
appointment for that day.
You can also cycle through the views by selecting Agenda, Day, Week, Month or Year on the menu bar.
You can quickly see your appointments for the current day in Agenda view, select MenuGo to Today.
Changing the Default Calendar Settings
1.
2.
3.
Select StartCalendar.
Select MenuToolsOptions and then do one of the flowing:
 In Start in, select the calendar view you prefer.
 To specify the first day of the week, in 1st day of week, select Sunday or Monday.
 To specify the number of days you want to appear in a week, in Week view, select 5‐day
week, 6‐day week, or 7‐day week.
Select OK to save settings.
6.2 Using Notes
The Notes program helps you to quickly capture thoughts, questions, reminders, to‐do lists and meeting
notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to
text for easy readability and send notes to others.
Your notes and recordings are displayed in the note list. If you have a long list, select the sort list
(labeled Name by default), and select the option you want. To open a note or play a recording, select it.
To see a list of available actions for a note or recording, select and hold the note or recording.
Creating a Note
1.
2.
3.
Select StartProgramsNotes.
Select New and enter text.
Select OK to save your note.
Setting the Default Input Mode and Template for Notes
1.
2.
3.
Select StartProgramsNotes.
Select MenuOptions.
Select one of the following modes in Default mode:
 Select Writing if you prefer your notes to be handwritten.
 Select Typing if you would like your notes to be typed.
41
4.
Select a template from Default template.
5.
Select OK to save your settings.
NOTE: You can change the input mode when editing a note. Select MenuDraw to switch to a different
mode. A check mark next to Draw indicates that it is in writing mode.
Creating a Stand‐alone Voice Recording
1.
2.
Select StartProgramsNotes.
If the recording toolbar is not shown, select MenuView Recording Toolbar.
3.
Select the RECORD button
start a voice recording.
4.
on the recording toolbar when finished. The recording will appear
Select the STOP button
in the notes list, and you can review it by selecting it.
Select OK to return to the notes list.
5.
on the recording toolbar and speak into the microphone to
NOTE: Except creating a stand‐alone voice recording, you can also add a voice recording to a note.
Editing a Handwritten Note
Two important options for editing a handwritten note are the Undo/Redo Ink items and the select All
and Clear items:
42

Undo/Redo Ink

Select All/Clear
Deleting a Note
1.
2.
3.
Select StartProgramsNotes.
Select and hold the note then select the Delete command.
Select Yes to confirm deleting the selected note.
6.3 Using Tasks
Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You
can set reminders for your tasks and you can organize them by using categories.
Your tasks are displayed in a task list. Overdue tasks are displayed in red.
If you use Outlook on your PC, you can synchronize tasks between the device and PC so that tasks you
create or update on your PC will also be updated on the device and vice versa.
43
NOTE: To quickly see the number of active tasks you have, select StartToday. If the Tasks item is
enabled, you will see the number of active tasks listed on the Today screen.
Creating a Task
1.
2.
Select StartProgramsTasks.
Do one of the following:
 Select the box labeled select here to add a new task, enter the task name and press the
jog ball.
 Select MenuNew Task, and then enter details about the new task.
NOTE: You can synchronize information on your phone with your PC to keep your task list up to date in
both locations.
If you create a new task with a reminder on your PC and then synchronize tasks with your phone, the
reminder will play at the time it was set on your PC.
You can assign a category to a task or create a new category for it. When editing a task, select
CategoriesNew and then give the new category a name. Select Done and the new category will
appear in the list.
Deleting a Task
1.
2.
Select StartProgramsTasks.
Select the task, select MenuDelete Task.
Changing a Task
1.
2.
3.
Select StartProgramsTasks.
Select an existing task and select Edit.
When finished making changes, select OK.
Sorting/Filtering Your Tasks
1.
2.
Select Start ProgramsTasks.
Do one of the following:
 To sort the tasks, select MenuSort by, then select a sorting option (e.g. Status or Due
Date).
 To filter the tasks by category, select MenuFilter, then select a category to display.
Setting Tasks Options
1.
2.
Select StartProgramsTasks.
Select MenuOptions, there are 3 options you can set:
 Set reminders for new items
 Show start and due dates
 Show Tasks entry bar
44
Chapter 7: Connecting to the Internet
7.1 Setting up Internet connections
The device’s powerful networking capabilities allow you to access the Internet or your corporate
network at work through telephony or wireless connections. Specifically, you can configure the device to
establish a connection via GPRS/EDGE/HSPA, Dial‐up and Wi‐Fi, or set up a VPN or network Proxy.
With an active connection on the device, you can browse the Web, download e‐mails or use Window
Live Messenger. Check with your service provider to see if a connection has already been set up for you
and if over‐the‐air configuration is supported.
If you need to manually set up a connection, it is important that you obtain the following information
from your Internet Service Provider (ISP) or the company whose intranet you are trying to access:
 User name
 Password
 Access point name (required for GPRS connection)
 Domain name (required for accessing a corporate network or an intranet)
Creating a GPRS/EDGE/HSPA Connection
Every network connection is different. You should gather all of the relevant information or network
settings you need before starting this process.
1. Select StartSettingsConnections tabConnections.
2. Select Add a new modem connection.
3. Enter a name for the connection.
4. In select a modem, select Cellular Line (GPRS)Next to continue.
5.
6.
In Access point name, enter the access point name then select Next. Access point name will be
provided by your carrier.
In User name, enter your user name for the GPRS network, if required.
45
7.
In Password, enter a password, if required. This information is also provided by your network
operator.
8.
9.
If required, select Advanced and enter information related to Servers and TCP/IP.
Select Finish.
NOTE: The device cannot connect to a PC through ActiveSync while connecting to the Internet using
GPRS/EDGE/HSPA.
Creating a Dial‐up Connection
No all service provider support dial‐up connection, please consult with your service provider. You will
need a phone number to connect to the Internet, a user name and a password in order to continue the
following steps.
1. Select StartSettingsConnection tabConnections.
2. Under My ISP, select Add a new modem connection.
3. In Enter a name for the connection, enter a name for the connection.
4. In Select a modem, select Cellular LineNext.
5. Enter the phone number provided by your service provider, select Next.
6. Enter the user name and password, select Finish.
Creating a Proxy Connection
Proxy connection lets you access the Internet through an intermediary IP address. You should gather all
of the relevant information or network settings you need before starting this process.
1. Select StartSettingsConnections tabConnections.
2. Select Set up my proxy server.
3. Check the checkbox in front of This network connects to the Internet.
4. Check the checkbox in front of This network uses a proxy server to connect to the Internet.
5. Under Proxy server, enter the proxy server name.
6. If the proxy server uses a different port or requires a username and password, select Advanced,
select the proxy type to change its settings, then enter username, password and/or port
number in the proper fields.
7. Select OK.
46
Starting a Connection Manually
You can start a connection manually if there is more than one connection type set on the device.
1. Select StartSettingsConnections tabConnections.
2. Select Manage existing connections.
3. Select and hold the desired connection type, then tap Connect.
Deleting a Connection
1.
2.
3.
Select StartSettingsConnections tabConnections.
Select Manage existing connections in the My ISP section.
Select and hold on the connection you want to delete, then select the Delete command.
7.2 Using a Wi‐Fi Connection
Wi‐Fi is wireless radio technology that allows you to access e‐mail, the internet and broadband
multimedia content. When the device encounters a hot‐spot (a place where you can access Wi‐Fi
networks) it can then connect to that network wirelessly. While some hotspots are free, the most robust
public Wi‐Fi networks are provided by private internet service providers (ISPs) or wireless carriers, and
using these networks will typically require payment of a connection fee.
NOTE: You may need to consult your ISP before running this utility.
IMPORTANT: The Wi‐Fi connection is disabled when the device is synchronizing with a PC.
The Wi‐Fi connection and the GSM connection cannot exist at the same time. The GSM connection will
be disabled automatically while having a Wi‐Fi connection, and vice versa.
Connecting to a Wi‐Fi Network
1.
2.
3.
4.
5.
Select StartSettingsConnections tabWireless Manager.
Select the third button to turn on Wi‐Fi connection (unless it already says “On”).
icon
Follow the prompts to finish related settings. When a Wi‐Fi connection is activated, the
shows at the top of the screen.
If you want to switch to another Wi‐Fi network, select StartSettingsConnections tabWi‐Fi.
(The program “Network Cards” will change its name into “Wi‐Fi” if the Wi‐Fi network is connected
successfully.)
On the Wireless tab, you can see the connected network and other available wireless networks.
47
6.
7.
8.
Select a wireless network then select Connect.
Follow the prompts to finish related settings.
Select OK to close the window.
Checking the Wi‐Fi Connection
You can check the current wireless connection status after connecting to a Wi‐Fi Network.
1. Select StartSettings Connections tabWiFi Network.
2. Information such as the SSID (the Wi‐Fi network name) and the wireless network signal strength
will be shown in a summary screen.
3.
4.
Select other tabs to check IP information, change power saving settings or review other advanced
settings.
Select OK.
Configuring Wi‐Fi Settings
You can configure wireless networks on the device by adding new Wi‐Fi connections and editing
currently available networks.
IMPORTANT: The screen for wireless networks configuration can only be accessed after Wi‐Fi is turned
on.
48
Creating a Wireless Connection
Some Wi‐Fi networks are hidden. You might sometimes need to enter the network settings manually. To
set up a new Wi‐Fi network connection, you will first need to have your home router settings or
information from your administrator about joining the corporate Wi‐Fi network.
1. After turning on Wi‐Fi on the device, do either of the following:
 Open Wireless Manager, select MenuWi‐Fi Settings.
 Select StartSettingsConnections tabNetwork Cards.
2. On the Wireless tabAdd New.
3. Enter the Network name, select a Network type, then select Next. If you want to connect to
another device instead of a network through an access point, select This is a device‐to‐device (ad‐
hoc) connection.
4. Enter required information, then select Next.
5. Select Use IEEE 802.1 x network access control to use EAP (Extensible Authentication Protocol).
Select EAP type: PEAP or Smart Card or Certificate.
6. Select Finish.
Editing a Wireless Network
1.
2.
3.
4.
Open Wireless Manager and then select MenuWi‐Fi Settings.
On the Wireless tab, you can see currently available wireless networks. Select and hold the
network you want to edit, then select Edit on the pop‐up menu.
Change the settings of this wireless network as required.
Select Finish to save your settings.
7.3 Using Wireless Manager
You can use Wireless Manager to activate and de‐activate the various wireless features on the device,
including cellular phone, Bluetooth and Wi‐Fi. Wireless Manager is useful when you need to reduce
battery consumption or if you use the device on an aircraft.
Opening Wireless Manager
To open the Wireless Manager, do one of the following:
 Select the signal strength icon ( ) at the top of the screen then select Wireless Manager.
49

Select StartSettingsConnections tabWireless Manager.
Enabling and Disabling a Wireless Feature
The Wireless Manager allows you to turn connections on and off quickly and easily.
1. Phone: turn the phone on and off.
2. Bluetooth: turn Bluetooth on and off.
3. Wifi: turn wifi on and off.
4. Flight mode: turn all off.
7.4 Using Internet Explorer Mobile
Internet Explorer Mobile is a full‐featured Web browser, optimized for use on your phone. You can use
Internet Explorer Mobile to browse the Internet once you have set up your Internet connection (if you
haven’t done so, please read the previous sections before continuing).
Browsing the Internet
1.
2.
3.
To browse the Internet you must have a valid connection established.
Select StartInternet Explorer.
Do either of the following:


Enter the address in the address bar, and Select .
Select Favorites then select a Web Page from the list.
Adding a Web Page to the Favorite List
1.
2.
3.
4.
5.
Select StartInternet Explorer.
To go to the page you want to add, select MenuAdd to Favorites.
Confirm or change the name and Web page address.
In Create in, select a folder for this favorite.
Select Add.
NOTE: A quick way to add favorites to your phone is to synchronize with your PC using ActiveSync. For
more information, see ActiveSync Help on your PC.
50
Deleting a Favorite
1.
2.
3.
4.
5.
Select StartInternet Explorer.
Select Favorites.
On the Add / Delete tab, select the favorite to delete.
Select the Delete button.
Select Yes to confirm the deletion.
Changing the Size of Text on Web Pages
1.
2.
Select StartInternet Explorer.
Select MenuViewZoom Level, then select the size you want.
Showing or Hiding Pictures on Web Pages
1.
2.
Select StartInternet Explorer.
Select MenuViewShow Pictures. Images on the Web pages that you visit will be download.
Un‐check this item if you do not want Internet Explorer to show pictures.
Changing Web Page Display Options
1.
2.
Select StartInternet Explorer.
Select MenuView, then select one of the following:
1. One Column. Arranges the content into one column that is as wide as the screen. This
means that you will rarely have to scroll horizontally.
2. Fit To Screen. Maintains a layout similar to what you see on a desktop computer, but
makes items smaller and arranges the content so that you can see most of it without
having to scroll horizontally.
3. Desktop. Keeps the same layout and size as on a desktop computer, which will require
both horizontal and vertical scrolling.
Send a Link by E‐mail
1.
2.
3.
4.
5.
Select StartInternet Explorer.
Go to the page you want to send.
Select MenuToolsSend Link.
The Messaging accounts list will appear. Select an account.
A new message will be created with the page address inserted in the message body. Choose a
recipient, enter any accompanying message then select Send.
Clearing History, Cookies, or Temporary Files
From time to time you might want to clear up space on the device and wipe Internet Explorer’s browser
history.
1. Select StartInternet Explorer.
2. Select Menu ToolsOptions.
3. Select the Memory tab.
4. Change the number in the day(s) box if needed.
5. Select Clear History or Delete Files then select OK.
51
Viewing a Page in Full Screen Mode
1.
2.
Select StartInternet Explorer.
Select MenuViewFull Screen.
NOTE: To exit full screen mode, select and hold on the screen and then un‐check the Full Screen item in
the pop‐up menu to cancel the selection.
52
Chapter 8: Transferring Files To and From the device
You might need to transfer application data such as Word documents, Excel spreadsheets, PowerPoint
slides and/or media files from your PC to the device, and vice versa. This section describes different
methods for transferring files to and from the device.
8.1 Using ActiveSync
NOTE: To transfer files from PC to the device with ActiveSync, Windows XP users must first install
Microsoft ActiveSync on the PC first. Windows Vista users do not need to install ActiveSync, but should
use Windows Mobile Device Center, which comes pre‐installed with Vista. Please refer to “Chapter 3.
Synchronizing Information” for details on how to install and set up ActiveSync.
1.
2.
3.
4.
5.
Connect the device to the PC with the USB cable. Microsoft ActiveSync on the PC should start
up the Synchronization Setup Wizard automatically.
Select an information type under Synchronization Options in the Synchronization Setup
Wizard by checking the appropriate checkbox.
Select the Settings button and add the files you want to transfer to the device. Select the OK
button when you finish.
Select Next, then select Finish to start the synchronization process.
On the device, select StartProgramsFile Explorer. The newly transferred files should
appear under My Documents. Check to see if the files have been transferred to the device
successfully.
8.2 Transferring from Memory Cards
1.
2.
3.
4.
5.
6.
Insert your memory card into the device’s MicroSD card slot. (See “1.3 Installing SIM card,
Battery and MicroSD card” for details.)
Select StartProgramsFile Explorer.
In the Show list, select Storage Card.
File Explorer should display all the files stored in your memory card. Select and hold the file or
folder you want to transfer then select Copy from the pop‐up menu.
From the Show list in File Explorer, choose the destination folder for the copied files. (For
example, select My DeviceMy Documents.)
In the destination folder, select MenuEditPaste.
53
8.3 Using Bluetooth
Bluetooth is a short‐range wireless communication technology. Devices with Bluetooth capabilities can
exchange information over a distance of about 10 meters without requiring a physical connection.
Before transferring files, you must turn on Bluetooth and establish a Bluetooth partnership between the
device and the other device.
Turning on Bluetooth
1.
2.
Select StartSettingsConnections tabBluetoothMode tab.
Select the Turn on Bluetooth option.
Creating a Bluetooth Partnership
1.
2.
3.
4.
5.
6.
Select StartSettings Connections tab Bluetooth, then select the Device tab.
Select Add new device. The device searches for other Bluetooth‐enabled devices and displays
them in the list.
Select the device with which you want to create a Bluetooth partnership, then select Next. If
the device you are looking for does not appear in the list, ensure that it is in range and that it
has been made discoverable, then select Refresh.
In Passcode, enter an alphanumeric passcode between 1 and 16 characters, then select Next.
Otherwise, leave the passcode blank. For security reasons, it is strongly recommended that you
use a passcode.
Enter the same passcode on the other device (there will be a prompt to do so).
Select the service to use from the partner device, and select Finish. One of the most common
examples of this is to choose the Microsoft ActiveSync service from the list of your PC’s
available Bluetooth services.
Receiving a File
Before receiving files, you must allow incoming beams. Select StartSettingsConnections tabBeam,
then enable the Receive all incoming beams option.
To receive beamed information, the device must first be made discoverable.
54
1.
2.
3.
4.
5.
6.
Select StartSettingsConnections tabBluetooth, then select the Mode tab.
Select Make this device visible to other devices.
On your PC (or other Bluetooth‐enabled device), locate the file or item you want to send. For
example, on your PC you would use Windows Explorer to locate the file.
In the example above, right‐click the file and select the destination device under “to
Bluetooth.”
Select Yes when the device prompts about receiving a file.
After the transmission process is finished, the file should be saved in My Documents on the
device.
Beaming an Item
Once you create a partnership, the two partnered Bluetooth‐enabled devices don't need to be
discoverable to communicate. In Calendar, Contacts, Notes, Tasks and Pictures, you can beam files and
information to other devices using Bluetooth.
1.
2.
3.
4.
5.
Turn on Bluetooth. Select StartSettingsConnections tab BluetoothMode tab.
Select the Turn on Bluetooth checkbox.
Select an item you want to beam. For example, open a task in Tasks.
Select MenuBeam.
Select the destination device.
Select OK after the transfer is done.
NOTE: If the target device does not appear in the list, ensure that the device is powered on, discoverable
and within close range of the device. Also, ensure that Bluetooth has been enabled on the device.
Bluetooth is turned off by default. However, if you turn Bluetooth on the device will remember this
setting and turn it back on automatically whenever the device powers up.To save battery power, please
remember to turn Bluetooth off after beaming information.
55
Chapter 9: Other Applications
9.1 Windows Live Messenger
You can send instant messages over the Internet with Windows Live Messenger.
NOTE: The device must be connected to the Internet before you can start using Windows Live
Messenger. To connect to the Internet, refer to “Chapter 7. Connecting to the Internet” for details.
You must have a valid Microsoft .NET Passport or Hotmail account before you can sign in to Windows
Live Messenger.
Signing In To Windows Live Messenger
1.
2.
Select StartProgramsMessenger.
In Sign in as, choose a display status (e.g. Online or Busy), then select Sign in.
3.
Before using Windows Live messenger for the first time, you have to accept the Windows Live
Terms of Use and Privacy Statement. Select Accept to continue.
Enter your Windows Live ID and password and select Next.
Select whether to show Windows Live on the Today screen or not. Then select Next.
4.
5.
56
6.
Choose from the Sync options and select Next.
7.
Windows Live will then sign you in online.
To sign out of Windows Live Messenger
Select MenuSign out.
Adding/Deleting a Windows Live Messenger Contact
1. Sign in to Windows Live Messenger.
2. Do any of the following:
 To add a contact, select MenuAdd New Contact, then follow the on‐screen
instructions.
 To delete a contact, select and hold the contact name in the Windows Live contact list,
select View contact’s infoMenuDelete Contact.
Sending an Instant Message
1.
2.
3.
4.
Sign into Windows Live Messenger.
Select the contact’s name, then select Send IM.
Enter a message, select MenuSend.
To close the chat window, select MenuEnd conversation.
Changing Windows Live Messenger Settings
1.
2.
3.
Sign in to Windows Live Messenger.
Select MenuOptions.
Select from the available optionsDone.
9.2 JETCET PDF5
Opening a PDF File
To open a file in JETCET PDF5, select the PDF file in File Explorer or do the following:
57
1.
2.
3.
Select StartProgramsJETCET PDF5.
Select the file that you want to view.
If you want to open a file on the network, tap
address.
to select the location and enter the server
Viewing the Document
After opening a file with JETCET PDF5, you can choose to view the file in full screen or zoom in/out the
file.
 Tap MenuViewFull screen. Use the four‐way navigation pad on the screen to navigate
through the document.

Tap MenuViewTools. Select
to fit the width of the page onto the screen. Select
display the entire page on‐screen. Select
25% to 200%.
to
to zoom in/out the file in the range from
9.3 Windows Media
The device comes with Windows Media Player pre‐loaded, which allows you to play digital audio and
video files stored locally or on a network.
Transferring Music and Videos to the device
If you want to store the media files to a storage card, insert a MicroSD card on the device before
connecting the device to a PC.
1.
2.
3.
4.
5.
6.
On your computer, open Windows Media Player.
Connect the device to your computer using a USB cable.
In Windows Media Player on your computer, click Sync.
Drag each item you want to synchronize to the device pane on the right side of the Windows
Media Player window.
At the bottom of the device pane, click Start Sync. This will start the synchronization process.
After transferring your media files, update your mobile device Media Library:
a. Select StartProgramsWindows Media.
b. Select Menu LibraryMy Device.
c.
Select the LibraryStorage Card if the files are stored in the MicroSD card. Otherwise,
skip this step.
d. Select MenuUpdate Library.
e. Select Done when update is completed.
Playing Media Files on the device
1.
2.
3.
4.
Select MenuLibrary to open the Library screen.
Select a category (e.g. My Music > All Music).
Select an item then select Play.
You can then use the following functions when playing audio or video files:
58
: Display the video in full screen.
: Launches a Web site where you can find music and videos to play.
: Skip to the beginning of the current file or to the previous file.
: Pause/Play.
: Skip to the next file.
: Decrease the volume level.
: Increase the volume level.
: Move to a different position in the currently playing track.
Saving a New Playlist
1.
2.
3.
4.
5.
6.
7.
Select StartProgramsWindows Media.
Select MenuLibrary.
Select a category (e.g. My Music > All Music).
Select an item, select MenuQueue Up. Selected item will be added to the Now
Playing list immediately.
Select MenuNow Playing.
Select MenuSave Playlist.
Enter a name for the playlist, then select Done.
On the Windows Media playback screen you can Select MenuOptions to change playback settings.
9.4 MIDlet Manager
A MIDlet is a Java program which can be downloaded from the Internet Explorer Mobile and work on
the device. You can use MIDlet Manager to handle all Java files on the device, including download,
installation, upgrade and deletion of MIDlets.
Installing a MIDlet
1.
2.
3.
Select StartProgramMIDlet Manager.
Select ActionsInstall, select whether to install the MIDlet from local storage or a website.
 To download and install the MIDlet from a website, launch the MIDlet hyperlink on the
website and then follow prompts on the screen to complete the installation.
 To install the MIDlet from local storage, double click on the file and then follow on‐
screen prompts to complete the installation.
Select OK on the screen.
9.5 Phone Profile
Profiles define how the device reacts when you receive a call or a message, how your keypad sounds
when you press a key and more. Select or customize the most suitable profile for your environment,
such as when you are in a meeting or outdoors. The profiles available are: Normal, Silent, Vibrate,
Outdoor and Headset. Each of them can be renamed or customized to fit your own needs.
59
Viewing Profile Details
You can view the default of each profile by doing the following:
1. Select StartProgramsPhone Profile.
2. Select a profile, select MenuSystem Profile.
Editing a Profile
1.
2.
3.
4.
5.
Select StartProgramsPhone Profile.
Select a profile then select Edit.
Select your preferred sound options for calls and messaging.
Select the Advance tab to set dial pad sound or auto‐answering function.
Select OK to apply the changes.
Restoring a Profile
1.
2.
3.
Select StartProgramsPhone Profile.
Do either of the following:
 Select the profile that you want to restore to default, select MenuRestore Selected.
 Select MenuRestore All to restore all profiles to default.
Select OK.
Using Audio Files as Ring Tones
You can use your own audio file as a ring tone. The device supports .wav, .wma, .mid (type 0), .mp3
audio format files as ring tones. For the audio files to be recognized by the profiles as ring tones, you
must place your audio files in one of the following folders:
 My Device\Windows
 My Device\Windows\Rings
 Storage Card\Rings
Open File Explorer, Select and hold the file, and then select the Set As Ringtone command.
9.6 GPS
A GPS (Global Positioning System) signal receiver is built in the device. You have to install a mapping
software on the device to start navigating. Please follow the instruction of your mapping software to
install it and use the navigation functions. You may need to specify the GPS hardware port when
installing the mapping software. Select the following value if requested.
 GPS hardware port: COM9.
 Baud rate: 9600.
IMPORTANT: Some mapping software or GPS navigation software may not be compatible with the
device, please consult with the software provider/retailer before installing the software.
Receiving Better Satellite Signals
GPS positioning is limited by bad weather (e.g. rainy or cloudy days) and usage location (e.g. tall
buildings, tunnels, underpasses, trees, bridges…etc). Most GPS do not work indoors, nor can GPS signals
penetrate buildings, car sun shades and heat reflective film with metallic content.
60
It can take several minutes the first time you establish a GPS connection. If you find the device can not
detect the satellite signal, try the following:
 Move the device to an open space without tall buildings or trees around it.
 Make sure there are no wireless communication products (e.g. radar‐detecting devices and
mobile phones) nearby since these products may cause unstable signal reception.
 Connect an external Bluetooth GPS receiver (not included in the package) to the device in
order to enhance the reception.
Important Notice about Using GPS






Please set navigation destinations before driving. It is forbidden in most counties to operate
the GPS system when driving.
The GPS is built and operated by the US Defense Department. The accuracy of location data
may be affected by changes made by the Department.
GPS should not be used for precise location measurement. It can only be used as a navigation
aid.
Do not turn on the car engine when the device is connected to the car charger (not included
in the package) as this may damage the device.
Make sure the DC voltage provided by your car and the electric current supplied from your
car charger are compatible with the device before using them.
Using the GPS may drain the battery faster than usual.
9.7 Internet Sharing
With Internet Sharing, you can connect your PC or notebook to the Internet by using the device’s
networking capability.
NOTE: Please remember to install a valid SIM card and establish a GPRS or dial‐up connection before
using Internet Sharing.
In order to use a USB cable connection, you have to install ActiveSync or WMDC on your PC (refer to
chapter three).
Please disable ActiveSync or WMDC before launching Internet Sharing.
Setting up the Device as a USB Modem
1.
2.
3.
4.
5.
Select StartProgramsInternet Sharing.
In PC Connection, select USB.
In Network Connection, select the connection that you want to use.
Connect the device to your PC with the USB cable.
Tap Connect on the device.
Setting up the Device as a Bluetooth Modem
1.
2.
3.
Establish a Bluetooth partnership between the device and your PC (refer to chapter 8.3) and
make sure Bluetooth on the device and your PC are turned on.
Select StartProgramsInternet Sharing.
In PC Connection, select Bluetooth PAN.
61
4.
5.
6.
7.
In Network Connection, select the connection that you want to use.
Tap Connect on the device.
Set up a Bluetooth PAN (Personal Area Network) on your PC.
Tap Connect on the device.
62
Chapter 10: Camera
10.1 Overview
The built‐in Camera application allows you to use the camera /microphone to capture videos and images.
Your camera has the following features:
Single image capture
Time controlled capture
Video capture
Quality, size and file format options
Special effects
Advanced options including anti‐flicker, storage location, reset counter
To open the camera, press and hold the camera button on the side of the device.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Capture mode
Resolution
Quality
Storage location
Shots remaining
Single shot/Timer
Close
Settings
View all pictures
63
10.2 Taking a picture
1. Press and hold the camera button to launch the camera application.
2. Position the device so that the image you want to capture of is displayed on the screen.
3. Press the camera button to take the picture.
10.3 Taking a video
1.
2.
3.
4.
5.
Press and hold the camera button to launch the camera application.
If the camera is in still capture mode, press the capture mode icon on the top left.
Position the device so that image you want to capture is displayed on the screen.
Press the camera button to start recording.
Press the camera button to stop recording.
10.4 Settings and Options
To access settings, press
. Press
to switch between menu pages.
Still Camera
Shooting mode
Single‐shot, Timer‐shot
Resolution
UGA(16000*1200), VGA(640*480), QVGA(320*240)
Effect
Off, Negative, Monochrome, Sepia
Anti flicker
Off, 50Hz, 60Hz
Quality
High, Low, Normal
Other
My Documents/Storage Card: select where you want to
save your files.
Reset Counter: reset the file naming counter back to 1.
Video Camera Settings
Effect
Off, Negative, Monochrome, Sepia
Resolution
QCIF(176*144), QVGA(320*240)
64
Video format
3GP, MP4
Other
My Documents/Storage Card: select where you want to
save your files.
Reset Counter: reset the file naming counter back to 1.
10.5 Pictures and Videos
Viewing and Editing Pictures
To view captured pictures, tap
. Scroll to a picture and do any of the following:
 Select Menu. You can see a list of options for managing the picture (e.g. Delete).
 Select View. You can view the selected picture.
 Select View and then select Menu. From the menu list, you can Zoom in/out, edit and
rename the picture.
Viewing and Managing Videos
1.
2.
3.
Select StartProgramsPictures & Videos.
Select My Pictures ▼, then select My Videos under My Documents.
Tap a video clip to play it or select Menu to show a list of available options.
65
Appendix
A.1 Specifications
System Information
Processor
Operating System
Memory
Qualcomm MSM7201, 400MHz
Windows Mobile 6.1 Professional
128 MB DDR SDRAM
256 MB Flash ROM
Dimensions and Weight
Dimensions
Weight
116 x 62 x 15 mm
145 g with battery
Keys and Notifications
Keys
Notifications
Jog ball
Velocity Button
Volume up and down
Start
OK
OK (side)
Record (configurable)
Camera Button (configurable)
Power Button
SEND and END
QWERTY Keypad
Reset Button
Vibrate
Audible
Visual message
LED: GSM/UMTS (Green Blink)
Missed call/Message Notification (Blue Blink)
Charging (Red)
Full Charged (Green)
Display
Type
Size/Resolution
TFT LCD with touch panel and backlight
2.46’’ QVGA 320x240 65K colors
Cellular connectivity
Band
GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
UMTS/HSDPA/HSUPA: 850,1900, 2100 MHz
UMTS up to 384k download and upload
HSDPA/HSUPA up to 7.2Mbps download and 2Mbps upload
66
System
Antenna
GSM/GPRS/EDGE class 10 supported
Embedded (2G/3G all band, Wi‐Fi, GPS, Bluetooth)
Connectivity and Interface
Bluetooth
SDIO
USB
Wi‐Fi
2.0 compliant + EDR
Supported, MicroSD form factor
USB 2.0 Full Speed, mini USB (Active sync and charging)
802.11b/g compliant
External Memory Card
Card Slot
MicroSD with SDIO
Battery and Power
Battery/Capacity
Talk/Standby Time
Lithium‐Ion Polymer Cell, 1410 mAh
4 hours / 200 hours (average)
Camera Module
Type
Max Resolution
Main camera: 2.0 MP CMOS sensor camera with Fix Focus
Second camera: 0.3MP CMOS
16000 x 1200
GPS
Chipset
GPS Receiver
AGPS compatible
Qualcomm gpsOne (MSM7201 integrated)
8 channels
Yes
Others
Headset Connector
TV‐out
2.5mm stereo connector
Through 2.5mm audio jack with AV cable
67
A.2 Regulatory Notices
Regulatory Agency IDs
For regulatory identification purposes, your product is assigned a model number of Velocity 111.
To ensure continued reliable and safe operation of the device, use only the accessories listed below with
your Velocity 111.
The Battery Pack has been assigned a model number of Velocity 111.
This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC,
maximum 1 Amp power supply unit.
European Union Notice
Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (89/336/EEC),
and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (in parentheses
are the equivalent international standards).







ETSI EN 301 489‐1
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements.
ETSI EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission
systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread
spectrum modulation techniques.
EN 50360/EN50361
Product standard to demonstrate the compliance of mobile phones with the basic restrictions
related to human exposure to electromagnetic fields (300MHz – 3GHz)
ETSI EN 301 489‐7
Electromagnetic compatibility and Radio spectrum matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for
mobile and portable radio and ancillary equipment of digital cellular radio
telecommunications systems (GSM and DCS).
ETSI EN 301 489‐17
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions
for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
EN 60950‐1 (IEC 60950‐1)
Safety of information Technology Equipment.
ETSI EN 301 511
Global system for mobile communications (GSM); Harmonized EN for mobile stations in the
GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TT
directive (1995/5/EC).
68
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee this equipment does not cause harmful interference to radio or TV
reception. This can be determined by turning the equipment on and off. The user is encouraged to try to
correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio or television technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS
COULD VOID THE USER＇S AUTHORITY TO OPERATE THE EQUIPMENT.
SAR Information


0.633W/Kg @1g (FCC) head
1.050W/Kg @1g (FCC) body
69
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based on the safety
standards previously set by both U.S. and international standards bodies:
 American National Standards Institute (ANSI) IEEE. C95.1‐1992
 National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986
 International Commission on Non‐Ionizing Radiation Protection (ICNIRP) 1996
 Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 Watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in usage. Normal conditions only
ensure the radiative performance and safety of the interference. As with other mobile radio
transmitting equipment, users are advised that for satisfactory operation of the equipment and for
personal safety reasons, it is recommended that no part of the human body be allowed to come too
close to the antenna during operation of the equipment.
SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories
that have no metallic component in the assembly and which provide at least 1.5 cm separation
between the device and the users body
WEEE Notice
The Waste Electrical and Electronic Equipment (WEEE) Directive is designed to encourage and regulate
the collection, re‐use, recycling and recovery of waste electrical and electronic equipment, which
entered into force as European law on 13th February 2003. The Directive aims to improve the level of
recycling of electrical and electronic equipment (EEE) and encourages designers to develop products
with recycling efficiency in mind; it also aims to improve our environment and reduce risks to human
health through the proper treatment of discarded goods.
) on the product and its accessories or on its box indicates that this product must
The WEEE logo (
not be disposed of or dumped with your other household waste. You are liable to dispose of all your
electronic or electrical waste equipment by relocating over to the specified collection point for recycling
of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste
equipment at the time of disposal will allow us to help conserve natural resources and reduce harm to
the environment and human health.
For more information about electronic and electrical waste equipment disposal, recovery and collection
points, please contact your local government office, household waste disposal service, the retailer from
where you purchased the equipment, or the manufacturer of the equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council
of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS) and its amendment.
70
Warning!
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO
NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE ABOVE
60.C (140.F), OR DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR
DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE GUIDE SUPPLIED
WITH YOUR PRODUCT.
A.3 PC Requirement to Run ActiveSync 4.5
To connect the device to a Windows PC running any Windows operating system prior to Windows Vista*,
you must have Microsoft® ActiveSync® program installed on your PC. ActiveSync 4.5 is included in the
Installation CD, which is compatible with the following operating systems and applications:
 Microsoft® Windows® 2000 Service Pack 4
 Microsoft® Windows® Server 2003 Service Pack 1
 Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1
 Microsoft® Windows® Server 2003 x64 Edition Service Pack 1
 Microsoft® Windows® XP Professional Service Packs 1 and 2
 Microsoft® Windows® XP Home Service Packs 1 and 2
 Microsoft® Windows® XP Tablet PC Edition 2005
 Microsoft® Windows® XP Media Center Edition 2005
 Microsoft® Windows® XP Professional x64 Edition
 Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and Microsoft® Outlook® XP, and
Microsoft® Outlook® 2003 messaging and collaboration clients
 Microsoft® Office 97, excluding Outlook
 Microsoft® Office 2000
 Microsoft® Office XP
 Microsoft® Office 2003
 Microsoft® Internet Explorer 4.01 or later (required)
 Microsoft® Systems Management Server 2.0
* If you are a Windows Vista user please use Windows Mobile Device Center, not Microsoft ActiveSync,
for device connectivity between your Windows Mobile device and Windows Vista.
71

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:10:01 14:25:59+08:00
Create Date                     : 2008:09:18 15:31:20+08:00
Metadata Date                   : 2008:10:01 14:25:59+08:00
Format                          : application/pdf
Title                           : Microsoft Word - C111_Eng_UM_20080918_for FCC test.docx
Creator                         : IEC950331
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:dbd1e968-ef09-4ca3-b479-2d7267f3456f
Instance ID                     : uuid:bdff9b12-d75a-4f98-a880-963a19e5e96a
Page Count                      : 71
Author                          : IEC950331

EXIF Metadata provided by EXIF.tools