Inventec ORCHID1 PDA PHONE User Manual 4

Inventec Corporation PDA PHONE Users Manual 4

Users Manual 4

Chapter 9.Using Barcode Reader9.1 Setting Barcode Reader9.2 Scanning and Reading Barcode labels
146Chapter 9. Using Barcode ReaderIn the top of your device, a barcode reader is built in. Depending on your model this is either a 1D laser scanner or an optical 2D scanner. With this device various types of barcodes are decoded into readable information such as letters and numbers. Settings of this barcode reader can be changed to fit your specific requests.9.1 Setting Barcode ReaderChanging Options in Barcode ReaderThe barcode reader is set to be disabled by default, please remember to activate it before scanning. 1. Tap > Settings > System tab > Barcode settings > Options tab.2. Check the check box of Barcode reader or/and Keyboard hook.When Keyboard hook is enabled, data is received as key message; when Keyboard hook is disabled, data is stored in the memory buffer temporarily. To retrieve the data, use specific software development kit (SDK) and compatible Windows application program interfaces (APIs). You can download the SDK from http://www.opticon.com.
1473. In Read Mode, tap the upward/downward arrow to toggle between Multiple and Single. Multiple read mode enables reading of multiple barcodes within a specified time after one time triggering, while being in single read mode needs the reader to be triggered again to read another label.4. In Buzzer, check the checkbox of Goodread sound. It enables the function of playing a sound effect after a barcode has been decoded successfully. You can change the sound effect by tapping the upward/downward arrow and play the sound effect you choose by tapping the Sound button on the screen.Keyboard hook can convert received characters to keyboard messages; therefore, you can read barcode in applications such as Notes, Tasks, Excel Mobile and Word Mobile as long as you enable the keyboard hook.
148Chapter 9. Using Barcode Reader5. In Additional trigger key, tap the upward/downward arrow to choose another access key for the reader. Otherwise you can set the additional trigger key to be none.Choosing Barcode TypesYour device is capable of scanning and decoding various barcode types; to check what kind of barcode is readable and to assign specific barcode types to scan for, do as follows:1. Tap > Settings > System tab > Barcode settings > Barcodes tab.2. Select specific barcode types or select all of them.3. Tap .
149Advanced SettingYou can set specific configuration to your barcode reader by editing a list of codes in the menu codes file. The codes you enter will be stored in the menu code file and replace default settings. For descriptions of menu codes, refer to Universal Menu Book (you can download it from www.opticon.com). Please note that supported menu codes depend on the module type or the firmware version of your device.Inputting Menu Codes from a FileYou can input menu codes automatically from a file, please do as follow to access the file and configure the barcode reader.1. Tap > Settings > System tab > Barcode settings > Menu codes tab.2. Tap to view available files in your device.Tap Cancel if you want to stop the procedure.
150Chapter 9. Using Barcode Reader3. Tap after you select a file.4. Tap to continue.Editing Existent Menu CodesYou can input characters directly to edit an existent menu codes file.1. Ta > Settings > System tab > Barcode settings > Menu codes tab.2. Tap .5. Tap .
1513. Input or delete menu codes.4. Tap .Returning to DefaultsYou can cancel all personalized settings in the barcode reader.1. Tap > Settings > System tab > Barcode settings > Menu codes tab.2. Tap .
152Chapter 9. Using Barcode Reader3. Tap to continue. 4. Tap .Firmware UpdateHow to update the firmware of your deviceYou can update the firmware of the barcode reader from an adapted file on your device or a Mini-SD card inserted to your device. Please connect your device with the AC adapter before updating the firmware.1. Tap > Settings > System tab > Barcode setting > Firmware Update tab.
1532. Tap to view available files and select one of them.3. Tap the file you want to update the firmware from. The selected file will be showed on the screen then.Tap Cancel if you want to stop the procedure.
154Chapter 9. Using Barcode Reader4. Input the default password “1234567890AB” and tap . You can then see current completed percentage of the update to be displayed on the screen.5. Tap to complete the operation.Change PasswordYou can change the default password of firmware update to another one.1. Tap > Settings > System tab > Barcode setting > Firmware Update tab.2. Tap .
1553. Input old password first. In Password Information, input your new password in both of the boxes in sequence for double confirmation. Then tap .4. Tap to complete the procedure.You can see more information about the barcode reader such as scanner version, please tap > Settings > System tab > Barcode settings > About tab.
156Chapter 9. Using Barcode Reader9.2 Scanning and Reading Barcode labelsYour device can scan and decode barcode labels depending on the scanner equipped with your device. If you prefer to read a barcode on your device right after scanning, open an application in which letters and numbers can be displayed before you activate the barcode reader.1. Open an application, e.g. Notes, Tasks and Contacts, in which you want to display converted barcode information after scanning.2. Do one of the following to enable barcode reader and keyboard hook:• Tap > Settings > System tab > Barcode settings > Options tab. Then check the checkboxes of Barcode reader and Keyboard hook.• Tap icon on the screen and tap in the dialog box to active barcode reader and keyboard hook directly.
1573. Point the barcode reader to a barcode label and press the scan key (left scan key, right scan key or the assigned trigger key).4. Adjust the distance between your device and the label, and make sure the light emitted from the scanner exceeds the width of the label.5. A Goodread Sound plays and the content of the barcode shows when the label is decoded successfully.Opticon barcode Opticon barcode Opticon barcode Opticon barcode Opticon barcode Opticon barcode Opticon barcode Opticon barcode Bar code2D code
158Chapter 9. Using Barcode Reader
Chapter 10.Other Applications10.1 Backing up/Recovering10.2 Managing Memory10.3 Windows Live Messenger10.4 Windows Media10.5 Office Mobile10.6 Phone Profile10.7 Formatting Storage Card and DiskOnChip10.8 Setting up GPS
160Chapter 10. Other Applications10.1 Backing up/RecoveringIt is advisable to make backups of your device data regularly in case important data is accidentally lost or damaged. You can restore your data from those backup copies as needed. Device data can be backed up to or be restored from DiskOnChip of your device or a compatible memory card.Backing up Data1. Tap > Programs > Backup Manager.2. Tap the Backup button.DiskOnChip is flash memory device which locates in an independent area of OS. DiskOnChip keeps the data even after a factory reset.
1613. Select the check box(es) of the item(s) that you want to backup.4. Input a file name for the backup copy. To name it automatically, tap .5. Select a location for storing the backup copy: Storage Card or DiskOnChip.6. Tap the Backup Button.
162Chapter 10. Other Applications7. Tap .Recovering Data1. Tap > Programs > Backup Manager.2. Tap the Restore button.
1633. Do one of the following to select a file:• Tap > Program > File Explorer > DiskOnChip/Storage Card > Backup File folder and select a file. Please note the Backup File may be located under DiskOnChip or Storage card. It depends on the backup path you had chosen.• Tap on the screen to view available files. You can then select one of them. Please note that the selected backup file will be deleted once it has been restored to your device successfully. 4. Tap the Restore Button.5. Tap .Only items that have already been backed up can be restored on your device.Your device will be rebooted automatically after you restore Personal Information (Calendar, Contact and Task) on the device.Installed applications will not be backed up.
164Chapter 10. Other Applications10.2 Managing MemoryChecking Available Storage1. Tap > Settings > System tab > Memory.2. In Main tab, you can see how much storage is available on the main memory of your device.3. To see how much storage is available on your storage cards, tap Storage Card tab.4. Use the drop-down menu to select your available storage cards and view their available memory.Closing a Running Program1. Tap > Programs > Task Manager.2. Select a program and tap End Task. Alternatively, tap Menu > End All Tasks to close all running programs.
16510.3 Windows Live MessengerYou can send instant messages with Windows Live Messenger.Signing In/Out Windows Live MessengerWith Windows Live Messenger, you can send and receive instant messages from other Windows Live Messenger users.Your device must be connected to the Internet before you can start using Windows Live Messenger. To connect to the Internet, refer to “Chapter 7. Connecting to the Internet” for details.You must have a valid Microsoft .NET Passport or Hotmail account before you can sign in to Windows Live Messenger.To sign in Windows Live Messenger1. Tap > Programs > Messenger.2. In Sign in as, select a condition which you want to show on your Windows Live Messenger. Then tap Sign in.
166Chapter 10. Other Applications3. Tap Accept4. Enter your e-mail and password and tap Next.5. Select whether to show Windows Live on the Today screen or not. Then tap Next. 6. Select what you want to sync on your device. Then tap Next.
1677. System will sign in to Windows Live automatically while all procedures are done.To sign out Windows Live Messenger• Tap Menu > Sign out.Adding/Deleting a Windows Live Messenger Contact1. Sign in Windows Live Messenger.2. Do any of the following:• To add a contact, tap Menu > Add New Contact, and follow the on-screen instructions.• To delete a contact, tap and hold the contact name in the Windows Live contact list, then tap View contacts’ info. Next, Tap Menu > Delete Contact.Sending an Instant Message1. Sign into Windows Live Messenger.2. Select the contact’s name to whom you want to send a message to. Then tap Send IM.3. Enter a message and tap Send.4. To close the dialog box of instant messages, tap Menu > E n d conversation.
168Chapter 10. Other ApplicationsChanging Windows Live Messenger Settings1. Sign in Windows Live Messenger.2. Tap Menu > Options.3. Select the type of options to change.4. Tap Done.Changing Windows Live Messenger Display Name1. Sign in Windows Live Messenger.2. Tap Menu > Change appearance.3. Enter a new display name and tap Done.Blocking/Unblocking a Contact• To block a contact from seeing you on-line, select the contact and tap Menu > Contact options > Block contact.• To unblock a contact, select the contact and tap Menu > Contact options > Unblock contact.If you connect to Window Live Messenger through a Wi-Fi network, please don’t disconnect the Wi-Fi network before you sign out Windows Live Messenger. Otherwise, your Windows Live contacts stored in your device may be lost.
16910.4 Windows MediaYou can play digital audio and video files that are stored on your device or on a network.Transferring Your Music and Videos to Your Device1. On your computer, open Windows Media Player.2. Connect your device to your computer using a USB cable.3. In Windows Media Player on your computer, click Sync.4. Drag each item you want to synchronize to the Sync List on the right side of the computer screen.5. Insert a mini-SD card to your device now if you want to synchronize media files to your device via a storage card.6. At the bottom of the Sync List, click Start Sync. The file will be synchronized to your device or the storage card.7. After transferring your media files, update your mobile device Media Library:I. Tap > Programs > Windows Media.II. Tap Menu > Library.When synchronizing media files via a storage card, your will need a 32 MB or larger storage card in your device.If you want to store the media files to a storage card, insert a MicroSD card on the device before connecting the device to a PC.
170Chapter 10. Other ApplicationsIII. Tap Library , then select My Device/Storage Card.IV. Tap Menu > Update Library.V. Tap Done when update is completed.
171Playing Media File on Your Device1. Tap Menu > Library to open the Library screen.2. Select a category (e.g. My Music > All Music).3. Select an item, and tap Play.4. You can then use the following functions when playing audio or video files:: Display the video in full screen: Displays a Web site where you can find music and videos to play.: Skip to the beginning of the current file or to the previous file.: Pause/Play: Skip to the next file.: Decrease the volume level.: Increase the volume level.: Adjust the playback progress of a selected file.
172Chapter 10. Other ApplicationsSaving a New Playlist1. Tap > Programs > Windows Media.2. Tap Menu > Library.3. Select a category (e.g. My Music > All Music).4. Select an item, then tap Menu > Queue Up. Selected item will be added to the Now Playing list immediately.5. Tap Menu > Now Playing.6. Tap Menu > Save Playlist.7. Enter a name for the playlist and tap Done.10.5 Office MobileExcel MobileWith Excel Mobile, you can create, view and edit spreadsheet on your device. Moreover, you can edit documents created on your desktop computer.Creating a New Spreadsheet1. Tap > Office Mobile > Excel Mobile.2. Enter text, numbers, and formulas as desired.3. Tap Menu > File > Save As.4. Enter a name for the document and tap the Save button.Unlike Microsoft Excel, you can only have one document open at a time in Excel Mobile.You can also tap Ok to save a spreadsheet and Excel Mobile gives it a name automatically.
173Excel Mobile Formatting ToolbarThe formatting toolbar in Excel Mobile provides a quick way to apply common functions such as create a chart or align text to the left.• In an Excel Mobile workbook, tap View > Toolbar.A check mark appears next to Toolbar when the toolbar is visible.Tap ToCreate a chart from the selected cellsAlign text to the leftCenter the selected textAlign text to the rightAdd all contiguous numbers in a column or rowAdd a currency symbolAdd the default thousands separatorAdd a decimal pointIncrease and decrease the magnification
174Chapter 10. Other ApplicationsPowerPoint MobileWith PowerPoint Mobile, you can view PowerPoint slides on you device.Starting a PowerPoint Presentation1. Tap > Office Mobile > PowerPoint Mobile.2. Tap the slide show you want to view in the presentation list.3. Tap the current slide to advance to the next slide if slides don’t advance automatically.4. Tap Menu > Rename/Move .5. Enter a name for the document and tap .Stopping a PowerPoint Presentation• In a slide show, tap > End Show.Navigating Between Slides• Tap > Next to go to the next slide.• Tap > Previous to go back to the previous slide.• To jump to any slide in the slide show, tap > Go to Slide and tap on the slide you want to view.PowerPoint Mobile only supports slides in .ppt and .pps formats.
175Word MobileWith Word Mobile, you can create and edit Microsoft Word documents and templates, plain text files, and/or rich text format files.Creating a Document1. Tap > Office Mobile > Word Mobile.2. Tap New, if a new document is not opened by itself.3. Enter text as desired.4. Tap Menu > File > Save As.5. Enter a name for the document and tap the Save button.Word Mobile Formatting ToolbarThe Formatting toolbar in Word Mobile provides a quick way to apply common formatting such as bold type, bulleted or numbered lists, and paragraph indentation to your text.• In a Word Mobile document, tap View > Toolbar.A check mark appears next to Toolbar when the toolbar is visible.Unlike Microsoft Word, you can only have one document open at a time in Word Mobile.You can also tap Ok to save a document after you finish editing text. This way, the first few words of the document are used as the filename.Tap ToMake the selected text boldMake the selected text italicUnderline the selected text
176Chapter 10. Other Applications10.6 Phone ProfilePhone Profile defines how your device reacts when you receive a call or a message, how your keypad sounds when you press a key, and more. Select or customize the most suitable profile for your situation, such as when you are in a meeting or outdoors. The phone profiles available are Normal, Silent, Vibrate, Outdoor, Headset, and User define.Tap ToAlign text to the leftCenter the textAlign text to the rightAdd or remove a numbered list in the selected textAdd or remove bullets in the selected textIncrease the indent of numbered or bulleted list text one tab stop to the rightDecrease the indent of numbered or bulleted list text one tab stop to the leftOnly User defined profile can be customized.
177Selecting a Profile1. Tap > Programs > Phone Profile.2. Select the most suitable profile for your situation from the list.3. Tap Menu > Select. Then Tap .4. Tap OK to confirm the selection.
178Chapter 10. Other ApplicationsDefining Your Own Profile1. Tap > Programs > Phone Profile.2. Select User Defined, and tap Menu > Edit.Viewing Profile Details1. Tap > Programs > Phone Profile.2. Select the profile you want to view its details.3. Tap Detail.3. Select the type of options to change.4. Tap .
17910.7 Formatting Storage Card and DiskOnChipWith Format Disk, you can format and check the capacity of an inserted storage card and DiskOnChip in your device.1. Tap > Programs > Format Disk.2. Select the area and file system.3. Tap .4. Tap Yes to continue.
180Chapter 10. Other Applications5. Tap the Info tab.6. Tap and check the capacity of an inserted storage card and/or DiskOnChip.Only a valid storage card can be formatted with Format Disk.10.8 Setting up GPSA GPS (Global Positioning System) signal receiver is built in your device. You have to install a mapping software on your device to start navigating. Please follow the instruction of your mapping software to install it and use the navigation functions. You may need to specify the GPS hardware port when installing the mapping software. Select the following value if requested.• GPS hardware port: COM4.• Baud rate: 57600.
181Some mapping software or GPS navigation software may not be compatible with your device, please consult with the software provider/retailer before installing the software.Receiving Better Satellite SignalsGPS positioning is limited by bad weather (e.g. rainy or cloudy days) and usage location (e.g. tall buildings, tunnels, underpasses, trees, bridges…etc). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content.It can take several minutes the first time you establish a GPS connection. If you find the device can not detect the satellite signal, try the following:• Move the device to an open space without tall buildings or trees around it.• Make sure there are no wireless communication products (e.g. radar-detecting devices and mobile phones) nearby since these products may cause unstable signal reception.• Connect an external Bluetooth GPS receiver (not included in the package) to your device in order to enhance the reception.Important Notice about Using GPS• It is forbidden in most counties to use the GPS system when driving.• The GPS is built and operated by the US Defense Department. The accuracy of location data may be affected by changes made by the Department.• GPS should not be used for precise location measurement. It can only be used as a navigation aid.• Do not turn on the car engine when your device is connected to the car charger (not included in the package) as this may damage your device.
182Chapter 10. Other Applications • Make sure the DC voltage provided by your car and the electric current supplied from your car charger are compatible with your device before using them.• Using the GPS may drain the battery faster than usual.
AppendixA.1 Regulatory NoticesA.2 PC Requirement to Run ActiveSync 4.5 A.3 Specifications
184AppendixA.1 Regulatory NoticesEuropean Union NoticeProducts with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards).• ETSI EN 301 489-1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.• ETSI EN 300 328Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques.• EN 50360 / EN62209-1Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300MHz – 3GHz)• ETSI EN 301 489-7Eletromagnetic compatibility and Radio spectrum matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).• ETSI EN 301 489-17
185Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.• EN60950-1+A11 (IEC 60950-1)Safety of information Technology Equipment.• ETSI EN 301 511Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TT directive (1995/5/EC).• 301489-3• EN300440-1• EN300440-2• EN55022• EN550240678
186AppendixList of National CodesCountry ISO 31662 letter codeCountry ISO 31662 letter codeAustria AT Malta MTBelgium BE Netherlands NTCyprus CY Poland PLCzech Republic CZ Portugal PTDenmark DK Slovakia SKEstonia EE Slovenia SIFinland FI Spian ESFrance FR Sweden SEGermany DE United Kingdom GBGreece GR Iceland ISHungary HU Liechtenstein LIIreland IE Norway NOItaly IT Switzerland CHLatvia LV Bulgaria BGLithuania LT Rmonnia ROLuxembourg LU Turkey TR
187Products with 2.4–GHz Wireless LAN Devices FranceL'utilisation de cet equipement (2.4GHz wireless LAN) est soumise à certaines restrictions: cet equipement peut être utilisé à l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 1–13). Pour une utilisation en environement exterieur, les frequences comprises entre 2400-2454 MHz (Chaîne 1-9) peuvent être utilisé. Pour les dernières restrictions, voir http://www.art-telecom.fr.For 2.4–GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire–2400–MHz to 2483.5–MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, only 2400-2454 MHz frequency band (channels 1-9) may be used. For the latest requirements, see http://www.art-telecom.fr. Wireless LAN Module’s Maximum EIRPFrequency Ranges (MHz) Indoors Outdoors2400 MHz ~ 2446.5 MHz10mW Not Permitted2446.5 MHz ~ 2483.5 MHz100mW 100mW on private property with Ministry of Defense approval.
188AppendixFederal Communications Commission NoticeThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee does cause harmful interference to radio or TV reception, which can be determined by turning the equipment on and off, the user is encourage to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or television technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
189RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea after searching on FCC ID:DGI-ORCHID1.For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the device at the ear, DGIORCHID1
190Appendixposition the handset a minimum of 1.5 cm from your body when the device is switched on.SAR InformationBand Position SAR 10g(W/kg)GSM900 Head 0.438GSM1800 Head 0.184Exposure to Radio Frequency (RF) SignalsYour wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:• American National Standards Institute (ANSI) IEEE. C95.1-1992• National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996• Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. Normal
191conditions only ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close antenna during operation of the equipment.Warning! DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE ABOVE 60.C (140.F), OR DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.A.2 PC Requirement to Run ActiveSync 4.5To connect your device to the PC, you must have Microsoft ActiveSync program installed on your PC. ActiveSync 4.5 is included in the Installation CD, which is compatible with the following operating systems and applications: • Microsoft Windows 2000 Service Pack 4• Microsoft Windows Server 2003 Service Pack 1
192Appendix• Microsoft Windows Server 2003 IA64 Edition Service Pack 1• Microsoft Windows Server 2003 x64 Edition Service Pack 1• Microsoft Windows XP Professional Service Packs 1 and 2• Microsoft Windows XP Home Service Packs 1 and 2• Microsoft Windows XP Tablet PC Edition 2005• Microsoft Windows XP Media Center Edition 2005• Microsoft Windows XP Professional x64 Edition• Microsoft Outlook XP and Microsoft Outlook 2003 messaging and collaboration clients• Microsoft Office XP• Microsoft Office 2003• Microsoft Internet Explorer 6.0 or later (required)• Microsoft Systems Management Server 2.0
193A.3 SpecificationsSystem InformationCPU Samsung S3C2440A, 400MHzOperating System Windows Mobile 6.1 Professional Memory 128 MB RAM512 MB ROMDimensions and WeighDimension 140.8 x 62.3 x 24.5 (25.5) mmWeight <H-19A> 193±5g with battery153±5g without battery<H-19B> 199±5g with battery159±5g without battery
194AppendixKey and IndicationKey •5-way navigation with action input•2 Scan key•Volume up and down•Power button•Talk key and End key•Reset button•Voice Record•2 Soft key•Fn key and Backspace key•12 key numeric dial padIndication •Vibrate•Audible•Visual message•LED 1: Wi-Fi (Green)/Bluetooth(Blue)•LED 2: Low Power/Missed Call(Red)/Charging(Orange)/GSM on(Green)DisplayType Transflective TFT LCD with touch panel and backlightMode Portrait/LandscapeSize/Resolution/Color 2.8", 240x320, 65K colors
195Scanner/Barcode Reader<H-19A> 1D Model Red laser diodeSupported Symbologies1D : EAN, JAN, UPC-A, UPC-E, Industrial 2 of 5, IATA, Interleaved 2 of 5,NW-7 (CODABAR), CODE-39, CODE-93, CODE-128, and so on<H-19B> 1D/2D Model CMOS Area SensorSupported Symbologies1D : EAN, JAN, UPC-A, UPC-E, Industrial 2 of 5, IATA, Interleaved 2 of 5,NW-7 (CODABAR), CODE-39, CODE-93, CODE-128, and so on2D : PDF417, Micro PDF417, QR Code, Data Matrix, Maxi Code, and so onConnectivityBluetooth Bluetooth 1.2 compliantWi-Fi IEEE 802.11 b/g compliantTelecom GSM 850/EGSM 900/DCS 1800/PCS 1900, GPRS class 12, EDGE class 10USB mini USB (Revision 1.1 client)
196AppendixGPSBuilt-in GPS module SiRF Star IIICold Start Time 45s (maximum in open space)Warm Start Time 45s (maximum in open space)Hot Start Time 10s (maximum in open space)Reacquisition Time < 1sAccuracy Static: 3m Dynamic:30mExternal Memory CardCard Slot Mini-SD card slot (maximum current: 200 mAh)Battery and PowerMain Battery Li-Ion Polymer 4.2V 1580mAhTalk Time 4 hoursStandby Time 150 hoursBattery Charing Time 4 hours (AC charger via mini USB)6 hours (USB cable connected to PC)Backup Battery 5 minutes RTC after main battery removal168 hours RTC in main battery low power
197WEEE NoticeThe Waste Electrical and Electronic Equipment (WEEE) Directive is designed to encourage and regulate the collection, reuse, recycling and recovery of waste electrical and electronic equipment, which entered into force as European law on 13th February 2003. The Directive aims to improve the level of recycling of electrical and electronic equipment (EEE) and encourages designers to develop products with recycling efficiency in mind; it also aims to improve our environment, reduce risks to human health through the proper treatment of discarded goods.The WEEE logo ( ) on the product and its accessories or on its box indicates that this product must not be disposed of or dumped with your other household wastes. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment.For more information about electronic and electrical waste equipment disposal, recovery and collection point, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.RoHS ComplianceThis product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amen.

Navigation menu