Inventec TPC-I024-WCT Wireless charging device User Manual statements

Download:
Mirror Download [FCC.gov]
Document ID	3294072
Application ID	VBbTRQE+2BhJI5y2Ws6awQ==
Document Description	User Manual (statements)
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	163.35kB (2041865 bits)
Date Submitted	2017-02-24 00:00:00
Date Available	2017-08-24 00:00:00
Creation Date	2016-09-06 15:43:25
Producing Software	Antenna House PDF Output Library 6.2.640 (Windows (x64))
Document Lastmod	2017-02-24 14:19:39
Document Title	Regulatory, Safety, and Environmental Notices User Guide
Document Creator	AH XSL Formatter V6.2 MR6 for Windows (x64) : 6.2.8.19325 (2015/01/06 12:40JST)

Regulatory, Safety, and Environmental
Notices
User Guide
© Copyright 2015, 2016 HP Development
Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by HP Inc. under license.
ENERGY STAR and the ENERGY STAR mark are
registered U.S. marks. Java is a registered
trademark of Oracle and/or its affiliates.
The information contained herein is subject to
change without notice. The only warranties for
HP products and services are set forth in the
express warranty statements accompanying
such products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
Sixth Edition: August 2016
First Edition: August 2015
Document Part Number: 836854-006
About This Guide
This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian,
and international regulations for notebook computers, desktops, thin clients, and personal workstations.
To access the latest user guides or manuals for your product, go to http://www.support.hp.com. Select Find
your product, and then follow the on-screen instructions.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or
loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to
equipment or loss of information.
NOTE:
Text set off in this manner provides important supplemental information.
iii
iv
About This Guide
Table of contents
1 Regulatory notices for notebook and tablet computers .................................................................................... 1
Accessing regulatory labels ................................................................................................................................... 1
Federal Communications Commission notice ....................................................................................................... 1
Modifications ....................................................................................................................................... 2
Cables .................................................................................................................................................. 2
Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2
Brazil notice ........................................................................................................................................................... 3
Canada notices ....................................................................................................................................................... 3
European Union regulatory notices ....................................................................................................................... 3
Declaration of Conformity ................................................................................................................... 3
Products with radio functionality (EMF) ........................................................................... 4
Restrictions for products with radio functionality ........................................................... 4
European telephone network declaration (Modem/Fax) ................................................. 4
Ergonomics notice ............................................................................................................. 4
Germany (English text) ................................................................................... 4
Germany (Deutscher text) .............................................................................. 4
Australia and New Zealand notice ......................................................................................................................... 5
China WWAN notice ................................................................................................................................................ 5
Japan notice ........................................................................................................................................................... 5
Wireless LAN, Wireless WAN, and Bluetooth® certification markings ................................................ 5
Mexico notice ......................................................................................................................................................... 5
Singapore wireless notice ...................................................................................................................................... 6
South Korea notices ............................................................................................................................................... 6
Thailand WWAN wireless notice ............................................................................................................................ 6
Taiwan NCC notices ................................................................................................................................................ 6
Wireless LAN 802.11a devices ............................................................................................................ 6
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 7
Wireless WAN devices .......................................................................................................................... 7
Airline travel notice ................................................................................................................................................ 7
User-replaceable battery notices .......................................................................................................................... 7
Factory-sealed battery notices ............................................................................................................................. 7
Laser compliance ................................................................................................................................................... 8
Modem notices ....................................................................................................................................................... 8
Telecommunications device approvals ............................................................................................... 8
U.S. modem statements ...................................................................................................................... 9
U.S. modem declarations .................................................................................................................. 10
Canada modem statements .............................................................................................................. 11
Japan modem statements ................................................................................................................ 11
New Zealand modem statements ..................................................................................................... 11
Voice support .................................................................................................................. 12
Power cord notice ................................................................................................................................................ 12
Japan power cord notice ................................................................................................................... 12
DC plug of external HP power supply ................................................................................................ 12
Macrovision Corporation notice ........................................................................................................................... 12
2 Regulatory notices for desktops, thin clients, and personal workstations ........................................................ 13
Modem notices ..................................................................................................................................................... 13
Telecommunications device approvals ............................................................................................. 13
U.S. modem statements .................................................................................................................... 13
Canadian modem statements ........................................................................................................... 14
Japanese modem statements ........................................................................................................... 14
New Zealand modem statements ..................................................................................................... 15
Voice support .................................................................................................................. 15
Electromagnetic compatibility notices ................................................................................................................ 15
Federal Communications Commission notice ................................................................................... 16
Modifications ................................................................................................................... 16
Cables .............................................................................................................................. 16
Products with wireless LAN devices ............................................................................... 16
Australia telecom statement ............................................................................................................ 17
Brazil notice ....................................................................................................................................... 18
Canadian notice ................................................................................................................................. 18
European Union regulatory notices .................................................................................................. 18
Declaration of Conformity .............................................................................................. 18
Products with radio functionality (EMF) ...................................................... 18
Restrictions for products with radio functionality ....................................... 19
European telephone network declaration (Modem/Fax) ............................ 19
Ergonomics notice ........................................................................................ 19
Japan notice ....................................................................................................................................... 19
Wireless LAN and Bluetooth certification markings ....................................................... 19
Mexico notice ..................................................................................................................................... 19
South Korea notices .......................................................................................................................... 20
Taiwan NCC notices ............................................................................................................................ 20
Wireless LAN 802.11a devices ........................................................................................ 20
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices ......................... 20
3 Safety notices for notebook and tablet computers ......................................................................................... 21
Heat-related safety warning notice .................................................................................................................... 21
vi
Potential safety conditions notice ....................................................................................................................... 21
Battery notices ..................................................................................................................................................... 21
Headset and earphone volume level notice ........................................................................................................ 22
Power cord notices .............................................................................................................................................. 22
Brazil notice ....................................................................................................................................... 22
Cleaning the keyboard ......................................................................................................................................... 22
Travel notice ........................................................................................................................................................ 22
China safety notices ............................................................................................................................................. 23
China: Altitude notice ........................................................................................................................ 23
China: Tropical warning notice .......................................................................................................... 23
Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................................... 23
使用過度恐傷害視力 ......................................................................................................................................... 23
4 Safety notices for desktops, thin clients, and personal workstations ............................................................... 24
Important safety information ............................................................................................................................. 24
Installation conditions ......................................................................................................................................... 25
Battery notices ..................................................................................................................................................... 25
Fan notices ........................................................................................................................................................... 26
Headset and earphone volume level notice ........................................................................................................ 26
Laser safety ......................................................................................................................................................... 26
Power supply and power cord set requirements ................................................................................................ 26
Power supply class I grounding requirements .................................................................................. 26
Brazil notice .................................................................................................................... 27
Denmark .......................................................................................................................... 27
Finland ............................................................................................................................. 27
Norway ............................................................................................................................ 27
Sweden ............................................................................................................................ 27
Power supply requirements .............................................................................................................. 27
For use in Norway ........................................................................................................... 27
Power cord set requirements ............................................................................................................ 27
Japan power cord requirements ....................................................................................................... 28
Pinch hazard ........................................................................................................................................................ 28
TV antenna connectors protection ...................................................................................................................... 28
External television antenna grounding ............................................................................................ 28
Lightning protection .......................................................................................................................... 28
Note to CATV system installer ........................................................................................................... 29
China safety notices ............................................................................................................................................. 30
China: Altitude notice ........................................................................................................................ 30
China: Tropical warning notice .......................................................................................................... 30
Germany acoustics notice .................................................................................................................................... 31
使用過度恐傷害視力 ......................................................................................................................................... 31
vii
5 Environmental notices for notebook and tablet computers ............................................................................. 32
Electronic hardware, packaging and battery recycling ....................................................................................... 32
Disposal of waste equipment by users ............................................................................................................... 32
Brazil alkaline battery disposal ........................................................................................................................... 32
Brazil hardware recycling information ................................................................................................................ 32
ENERGY STAR® Certification (select models only) ............................................................................................... 33
Chemical substances ........................................................................................................................................... 34
China environmental notices ............................................................................................................................... 34
China PC energy label .......................................................................................................................................... 34
China restriction of hazardous substances (RoHS) ............................................................................................. 37
The Table of Hazardous Substances/Elements and their Content ................................................... 37
产品中有害物质或元素的名称及含量 ........................................................................................... 38
有害物質限制使用管理辦法 (RoHS) ................................................................................................................. 39
限用物質含有情況標示聲明書 ....................................................................................................... 39
India restriction of hazardous substances (RoHS) .............................................................................................. 41
Information for European Union Commission Regulation 1275/2008 .............................................................. 41
IT ECO declarations .............................................................................................................................................. 41
Japan restriction of hazardous substances (RoHS) ............................................................................................ 41
Mexico Sustainable Energy Use Law ................................................................................................................... 42
Turkey EEE regulation .......................................................................................................................................... 42
Ukraine restriction of hazardous substances (RoHS) ......................................................................................... 42
Perchlorate material—special handling may apply ........................................................................................... 42
6 Environmental notices for desktops, thin clients, and personal workstations .................................................. 43
Electronic hardware, packaging and battery recycling ....................................................................................... 43
Disposal of waste equipment by users ............................................................................................................... 43
Brazil alkaline battery disposal ........................................................................................................................... 43
Brazil hardware recycling information ................................................................................................................ 43
ENERGY STAR® Certification (select models only) ............................................................................................... 44
Chemical substances ........................................................................................................................................... 45
Mercury statement .............................................................................................................................................. 45
Perchlorate material–special handling may apply ............................................................................................. 45
China environmental notices ............................................................................................................................... 45
China PC energy label .......................................................................................................................................... 46
China restriction of hazard substances (ROHS) ................................................................................................... 49
The Table of Hazardous Substances/Elements and their Content ................................................... 49
产品中有害物质或元素的名称及含量 ........................................................................................... 50
有害物質限制使用管理辦法 (RoHS) ................................................................................................................. 52
限用物質含有情況標示聲明書 ....................................................................................................... 52
India restriction of hazardous substances (RoHS) .............................................................................................. 54
Information for European Union Commission Regulation 1275/2008 .............................................................. 54
viii
IT ECO declarations .............................................................................................................................................. 54
Japan restriction of hazardous substances (RoHS) ............................................................................................ 54
Mehiški zakon o uporabi trajnostne energije ...................................................................................................... 54
Turkey EEE regulation .......................................................................................................................................... 55
Omejevanje uporabe nekaterih nevarnih snovi (RoHS) za Ukrajino ................................................................... 55
TCO Certified Edge Certification ........................................................................................................................... 55
Index ............................................................................................................................................................. 57
ix
x
1
Regulatory notices for notebook and tablet
computers
This chapter provides country- and region-specific non-wireless and wireless regulatory notices and
compliance information for the computer product. Some of these notices may not apply to your product.
One or more integrated wireless devices may be installed. In some environments, the use of wireless devices
may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous
locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for
authorization to use it before you turn it on.
Accessing regulatory labels
Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be
physically located on the bottom of the computer, inside the battery bay (select models only), under the
removable service door (select models only), on the back of the display, or on the wireless or modem module.
Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the
system BIOS.
NOTE:
Electronic labels are not available on all products.
NOTE:
Devices not for sale or use in the United States may not contain a FCC ID.
To view electronic regulatory labels:
1.
Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2.
Press f10 to enter Computer Setup.
3.
Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press
enter.
4.
To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and
then press OK.
NOTE: The list of available electronic label items varies depending on the computer model and
installed devices.
5.
To exit Computer Setup menus without saving your changes:
Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
Accessing regulatory labels
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio or television technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired
operation.
For questions regarding this product, write to:
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
or call HP at 650-857-1501.
To identify this product, refer to the part, series, or model number found on the product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by HP may void the user's authority to operate the equipment.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with
shielded cables having metallic RFI/EMI connector hoods.
Products with wireless LAN devices or HP Mobile Broadband Modules
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the
FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the
potential for human contact is minimized during normal operation of tablet PCs and notebook computers.
During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm
(12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to
the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to
the computer user guides included with your computer.
During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the
possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not
be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the
wireless antennas, refer to the computer user guides included with your computer.
Chapter 1 Regulatory notices for notebook and tablet computers
Brazil notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos
elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL.
Ao operar o dispositivo a uma distância muito próxima do seu corpo, utilize um acessório de armazenamento
não metálico para posicionar o dispositivo a uma distância mínima de 1,5 cm do corpo.
Canada notices
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies
with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the
Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner
that the potential for human contact is minimized during normal operation.
During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm
(12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human
proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless
antennas, refer to the computer user guides included with your computer.
During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the
possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the
antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify
the location of the wireless antennas, refer to the computer user guides included with your computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz
and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
The antennas for this device are not replaceable. Any attempt at user access will damage your computer.
European Union regulatory notices
Declaration of Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be
applicable:
R&TTE Directive 1999/5/EC (replaced in 2017 by RED 2014/53/EU); Low Voltage Directive 2014/35/EU; EMC
Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU
Compliance with these directives is assessed using applicable European Harmonised Standards.
Brazil notice
The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates
(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the
regulatory label.)
The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany.
Products with radio functionality (EMF)
This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a
separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements.
Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU
requirements in typical operating positions. Products can be operated without maintaining a separation
distance unless otherwise indicated in instructions specific to the product.
Restrictions for products with radio functionality
When operating in the frequency band 5150 to 5350 MHz, this product is restricted to indoor use only.
European telephone network declaration (Modem/Fax)
The product herewith complies with the requirements of the applicable Directive and carries the CE marking
accordingly. However, due to differences between the individual PSTNs provided in different countries/
regions, the approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems, you should contact your equipment supplier in the
first instance.
Ergonomics notice
Germany (English text)
When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit
(VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the
application and task, an adequate external monitor may also be necessary to attain working conditions
comparable to a workstation setup.
Ref: EK1-ITB 2000 (voluntary GS certification)
Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without
external keyboards, they are suitable only for short-time use of VDU tasks.
During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur,
which result in reduced readability.
Germany (Deutscher text)
Wird ein mobiler Computer für Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG
(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhängig von
der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare
Arbeitsbedingungen zu einem stationären Arbeitsplatz zu erreichen.
Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung)
Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind
nur für kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet.
Bei mobiler Nutzung mit ungünstigen Lichtverhältnissen (z.B. direkte Sonneneinstrahlung) kann es zu
Reflexionen und damit zu Einschränkungen der Lesbarkeit der dargestellten Zeichen kommen.
Chapter 1 Regulatory notices for notebook and tablet computers
Australia and New Zealand notice
This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of
20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards.
China WWAN notice
Japan notice
Wireless LAN, Wireless WAN, and Bluetooth® certification markings
This product contains certified radio equipment.
Mexico notice
Declaración para México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada. The regulatory model number for this
product is on the regulatory label.
If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify
the model of the accessory, refer to the label included on that accessory. The regulatory model number for
this product is on the regulatory label.
Australia and New Zealand notice
Singapore wireless notice
Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal,
may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe
this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both.
Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting
operations are in progress.
As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the
equipment and for the safety of personnel, no part of the human body should be allowed to come too close to
the antennas during operation of the equipment.
This device has been designed to comply with applicable requirements for exposure to radio waves, based on
scientific guidelines that include margins intended to assure the safety of all people, regardless of health and
age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption
rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its
highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's
standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of
tissue.
South Korea notices
Thailand WWAN wireless notice
This telecom equipment has complied with NTC regulations.
Taiwan NCC notices
Wireless LAN 802.11a devices
Chapter 1 Regulatory notices for notebook and tablet computers
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices
Wireless WAN devices
Airline travel notice
Use of electronic equipment onboard commercial aircraft is at the discretion of the airline.
User-replaceable battery notices
When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for computer battery disposal.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable
batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/
recycle.
For information about removing a user-replaceable battery, refer to the user guide included with the product.
Factory-sealed battery notices
The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the
battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support.
When a battery has reached the end of its useful life, do not dispose of the battery in general household
waste. Follow the local laws and regulations in your area for battery disposal.
Airline travel notice
Laser compliance
WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the
laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to
hazardous radiation:
●
Do not try to open the module enclosure. There are no user-serviceable components inside.
●
Do not operate controls, make adjustments, or perform procedures to the laser device other than those
specified in the laser product installation guide.
●
Allow only authorized service providers to repair the unit.
This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber
optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in
accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard.
Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those
regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.
Modem notices
WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always
follow basic safety precautions, including the following:
●
Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.
●
Avoid using this product during an electrical storm. There is a remote risk of electric shock from
lightning.
●
Do not use this product to report a gas leak while in the vicinity of the leak.
●
Always disconnect the modem cable before opening the equipment enclosure or touching an
uninsulated modem cable, jack, or internal component.
●
If this product was not provided with a telephone line cord, use only No. 26 AWG or larger
telecommunication line cord.
●
Do not plug a modem or telephone cable into the RJ-45 (network) jack.
SAVE THESE INSTRUCTIONS.
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network in the
countries and regions whose approval markings are indicated on the product label located on the bottom of
the computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country or
region in which the product is located. Selecting a country or region other than the one in which it is located
may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that
Chapter 1 Regulatory notices for notebook and tablet computers
country or region. In addition, the modem may not function properly if the correct country or region selection
is not made. If, when you select a country or region, a message appears that states that the country or region
is not supported, this means that the modem has not been approved for use in this country or region and thus
should not be used.
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the
bottom of the computer or on the modem is a label that contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are
requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not
all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
If this HP equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the
telephone company will notify you as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted telephone service.
If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved. You should perform repairs only to the equipment specifically discussed in the
“Troubleshooting” section of the user guide, if one is provided.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the
installation of this HP equipment does not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including a fax machine, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and
time it is sent and an identification of the business, other entity, or other individual sending the message, and
the telephone number of the sending machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other number for which charges exceed local or longdistance transmission charges).
In order to program this information into your fax machine, you should complete the steps outlined in the
faxing software instructions.
Modem notices
U.S. modem declarations
Refer to the following modem vendor declarations for the modem device installed in your computer:
10
Chapter 1 Regulatory notices for notebook and tablet computers
Canada modem statements
This equipment meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of
devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN
for this terminal equipment is 1.0.
Japan modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the
appropriate certification marking below.
The Japanese certification mark for the V.92 56K Data/Fax Modem is below:
New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always
continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to
bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should
not contact the Telecom Faults Service.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the
equipment (PC) associated with this device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specifications:
a.
There shall be no more than 10 call attempts to the same number within any 30-minute period for any
single manual call initiation.
b.
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one
attempt and the beginning of the next attempt.
c.
Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a
period of not less than 5 seconds between the end of one attempt and the beginning of the next
attempt.
d.
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of
ringing (So set between 2 and 10).
Modem notices
11
Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand law. This
requires that at least one party to the conversation is aware that it is being recorded. In addition, the
Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal
information collected, the purpose for its collection, how it is to be used, and what is disclosed to any
other party.
This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.
Power cord notice
If you were not provided with a power cord for the computer or for an external power accessory intended for
use with the computer, you should purchase a power cord that is approved for use in your country or region.
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm²/
18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions
about the type of power cord to use, contact your authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or
against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits
from the product.
Japan power cord notice
DC plug of external HP power supply
Macrovision Corporation notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be authorized by Macrovision Corporation and is intended for
home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
12
Chapter 1 Regulatory notices for notebook and tablet computers
2
Regulatory notices for desktops, thin
clients, and personal workstations
Modem notices
WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always
follow basic safety precautions, including the following:
●
Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.
●
Avoid using this product during an electrical storm. There is a remote risk of electric shock from
lightning.
●
Do not use this product to report a gas leak while in the vicinity of the leak.
●
Always disconnect the modem cable before opening the equipment enclosure or touching an
uninsulated modem cable, jack, or internal component.
●
If this product was not provided with a telephone line cord, use only No. 26 AWG or larger
telecommunication line cord.
●
Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack.
SAVE THESE INSTRUCTIONS.
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network in the
countries and regions whose approval markings are indicated on the product label located on the bottom of
the computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country or
region in which the product is located. Selecting a country or region other than the one in which it is located
may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that
country or region. In addition, the modem may not function properly if the correct country or region selection
is not made. If, when you select a country or region, a message appears that states that the country or region
is not supported, this means that the modem has not been approved for use in this country or region and thus
should not be used.
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the
bottom of the computer or on the modem is a label that contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are
requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for details.
Modem notices
13
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not
all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is separately shown on the label.
If this HP equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the
telephone company will notify you as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted telephone service.
If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved. You should perform repairs only to the equipment specifically discussed in the
“Troubleshooting” section of the user guide, if one is provided.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the
installation of this HP equipment does not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including a fax machine, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and
time it is sent and an identification of the business, other entity, or other individual sending the message, and
the telephone number of the sending machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other number for which charges exceed local or longdistance transmission charges).
In order to program this information into your fax machine, you should complete the steps outlined in the
faxing software instructions.
Canadian modem statements
This equipment meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of
devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN
for this terminal equipment is 1.0.
Japanese modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the
appropriate certification marking below.
The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:
14
Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations
New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that
the item complies with minimum conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any
item will work correctly in all respects with another item of Telepermitted equipment of a different make or
model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always
continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to
bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should
not contact the Telecom Faults Service.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the
equipment (PC) associated with this device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specifications:
a.
There shall be no more than 10 call attempts to the same number within any 30-minute period for any
single manual call initiation.
b.
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one
attempt and the beginning of the next attempt.
c.
Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a
period of not less than 5 seconds between the end of one attempt and the beginning of the next
attempt.
d.
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of
ringing (So set between 2 and 10).
Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand law. This
requires that at least one party to the conversation is aware that it is being recorded. In addition, the
Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal
information collected, the purpose for its collection, how it is to be used, and what is disclosed to any
other party.
This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.
Electromagnetic compatibility notices
This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance
information for the computer product. Some of these notices may not apply to your product.
One or more integrated wireless devices may be installed. In some environments, the use of wireless devices
may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous
Electromagnetic compatibility notices
15
locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for
authorization to use it before you turn it on.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and the receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio or television technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired
operation.
For questions regarding this product, write to:
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
or call HP at 650-857-1501.
To identify this product, refer to the part, series, or model number found on the product.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not
expressly approved by HP Inc. may void the user's authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order
to maintain compliance with FCC Rules and Regulations.
Products with wireless LAN devices
This product may be equipped with a wireless LAN device. This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
16
Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the
FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the
potential for human contact is minimized during normal operation.
During normal operation: To avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the
wireless antennae, refer to the documentation included with the computer.
Australia telecom statement
The computer must be connected to the Telecommunication Network through a line cord that meets the
requirements of AS/CA S008.
WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be
installed in any other device.
This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of
20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards.
Electromagnetic compatibility notices
17
Brazil notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em
caráter primário.
CAUTION: A alimentação de energia é predefinida para 220/230Vv. Se você possuir tomada elétrica de
110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tensão correta.
Canadian notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, this device complies
with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the
Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner
that the potential for human contact is minimized during normal operation.
During normal operation: To avoid the possibility of exceeding the Industry Canada radio frequency exposure
limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of
the wireless antennae, refer to the documentation included with the computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz
and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
The antenna for this device is not replaceable. Any attempt at user modification may damage your computer.
European Union regulatory notices
Declaration of Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be
applicable:
R&TTE Directive 1999/5/EC (replaced in 2017 by RED 2014/53/EU); Low Voltage Directive 2014/35/EU; EMC
Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU
Compliance with these directives is assessed using applicable European Harmonised Standards.
The full Declaration of Conformity can be found at the following web site: http://www.hp.eu/certificates
(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the
regulatory label.)
The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany.
Products with radio functionality (EMF)
This product may incorporate a radio transmitting and receiving device. For desktop computers in normal use,
a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements.
18
Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations
Restrictions for products with radio functionality
When operating in the frequency band 5150 to 5350 MHz, this product is restricted to indoor use only.
European telephone network declaration (Modem/Fax)
The product herewith complies with the requirements of the applicable Directive and carries the CE marking
accordingly. However, due to differences between the individual PSTNs provided in different countries/
regions, the approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems, you should contact your equipment supplier in the
first instance.
This equipment has been designed to work with analogue DTMF Networks. This equipment may have
internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your
network operator for further assistance.
Ergonomics notice
Germany (English text)
A computer system comprising HP brand products meets the applicable ergonomic requirements if all
affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PCmouse and monitor.
Germany (Deutscher text)
Ein aus HP Produkten bestehendes Computersystem erfüllt die anwendbaren ergonomischen Anforderungen,
wenn alle verwendeten Komponenten das „GS“ Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PCMaus und Bildschirm.
Japan notice
Wireless LAN and Bluetooth certification markings
If this device contains radio equipment, it is certified radio equipment.
Mexico notice
Declaración para México
Electromagnetic compatibility notices
19
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify
the model of the accessory, refer to the label included on that accessory.
South Korea notices
Taiwan NCC notices
Wireless LAN 802.11a devices
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices
20
Chapter 2 Regulatory notices for desktops, thin clients, and personal workstations
3
Safety notices for notebook and tablet
computers
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup, posture, and health and work habits for computer users, and provides important electrical
and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the
Documentation CD that is included with the product.
Heat-related safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the
computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat
surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as
pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft
surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with
the user-accessible surface temperature limits defined by the International Standard for Safety of
Information Technology Equipment (IEC/EN 60950).
Potential safety conditions notice
If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:
crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for
these conditions to appear when an internal electronic component fails in a safe and controlled manner.
However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn
off the computer, disconnect it from its power source, and contact technical support for assistance.
Battery notices
WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external
contacts; do not dispose of in fire or water.
WARNING!
Keep new and used batteries away from children.
WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement
battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the
computer.
WARNING!
Do not ingest battery, a Chemical Burn Hazard.
WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
WARNING! If the battery compartment does not close securely, stop using the product and keep it away
from children.
Heat-related safety warning notice
21
WARNING! If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
WARNING! Leaving a battery in an extremely high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid or gas.
WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of
flammable liquid or gas.
Headset and earphone volume level notice
To prevent possible hearing damage, do not listen at high volume levels for long periods.
WARNING!
Adjustment of the volume control as well as the equalizer to other settings than the center position may
increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors
influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating
system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and
therefore the sound pressure level.
Power cord notices
WARNING!
To reduce the risk of electric shock or damage to the equipment:
●
Plug the power cord into an AC outlet that is easily accessible at all times.
●
Disconnect power from the computer by unplugging the power cord from the AC outlet.
●
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a
replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used
with the computer.
Brazil notice
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua
aterramento (três pinos), conforme a norma nbr abnt 5410,visando a segurança dos usuários contra choques
elétricos.
Cleaning the keyboard
WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum
cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard
surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles
that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to
blow air around and under the keys to loosen and remove debris.
Travel notice
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power
the computer with a voltage converter kit sold for appliances.
22
Chapter 3 Safety notices for notebook and tablet computers
China safety notices
China: Altitude notice
Altitude warning for products not certified for use in >5000 m
Icon
Description
China: Tropical warning notice
Tropical warning for products not certified for use in tropical regions.
Icon
Description
Norway and Sweden: Cable grounding notice for products with a
TV tuner
CAUTION:
system.
To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution
使用過度恐傷害視力
注意事項:
(1) 使用 30 分鐘請休息 10 分鐘。
(2) 未滿 2 歲幼兒不看螢幕，2 歲以上每天看螢幕不要超過 1 小時。
China safety notices
23
4
Safety notices for desktops, thin clients,
and personal workstations
Important safety information
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup, posture, and health and work habits for computer users, and provides important electrical
and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the
Documentation CD that is included with the product.
To reduce the risk of electric shock or damage to the equipment:
●
Plug the power cord into an AC outlet that is easily accessible at all times.
●
Disconnect power from the computer by unplugging the power cord from the AC outlet.
●
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it.
Install the computer near an AC outlet. The AC power cord is your computer’s main AC disconnecting device
and must be easily accessible at all times. For your safety, the power cord provided with your computer has a
grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical
shock.
To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC
outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your
computer from the AC power outlet.
Always disconnect the modem cord from the telephone system before installing or removing your computer
cover.
Do not operate the computer with the cover removed.
For your safety, always unplug the computer from its power source and from any telecommunications
systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to
do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power
supply and modem of this product.
As a safety precaution, if the system power load exceeds the specific configuration’s capacities, the system
may temporarily disable some USB ports.
CAUTION: If your computer is provided with a voltage select switch for use in a 115 or 230 V power system,
the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/
region where it was initially sold. Changing the voltage select switch to the incorrect position can damage
your computer and void any implied warranty.
This product has not been evaluated for connection to an “IT” power system (an AC distribution system with
no direct connection to earth, according to IEC/EN 60950).
24
Chapter 4 Safety notices for desktops, thin clients, and personal workstations
Installation conditions
See installation instructions before connecting this equipment to the input supply.
WARNING!
The equipment must be provided with a proper AC protective earth (PE) ground connection.
Energized and moving parts may be inside the computer. Disconnect power to the equipment before
removing the enclosure. Replace and secure the enclosure before re-energizing the equipment.
Battery notices
WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or
alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly.
WARNING!
Do not attempt to recharge the battery.
WARNING!
Do not expose to temperatures higher than 60° C (140° F).
WARNING!
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according
to the instructions.
WARNING!
Replace only with the HP spare designated for this product.
WARNING!
Do not ingest battery, a Chemical Burn Hazard.
WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
WARNING!
Keep new and used batteries away from children.
WARNING! If the battery compartment does not close securely, stop using the product and keep it away
from children.
WARNING! If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
WARNING! Leaving a battery in an extremely high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid or gas.
WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of
flammable liquid or gas.
Icon
Description
Batteries, battery packs, and accumulators should not be disposed of together with the general household
waste. In order to forward them to recycling or proper disposal, please use the public collection system or
return them to HP, an authorized HP partner, or their agents.
Icon
Description
The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the
Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions.
Contact a qualified Taiwanese recycler for proper battery disposal.
Installation conditions
25
Fan notices
WARNING!
WARNING!
Keep body parts away from moving parts.
WARNING!
Keep body parts away from fan blades.
WARNING!
Keep body parts out of the motion path.
Headset and earphone volume level notice
WARNING!
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Adjustment of the volume control as well as the equalizer to other settings than the center position may
increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors
influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating
system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and
therefore the sound pressure level.
Laser safety
For products equipped with optical drives or fiber optic transceivers.
This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic
transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard
IEC/EN 60825-1 and comply with its requirements.
Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those
regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
WARNING! Use of controls or adjustments or performance of procedures other than those specified herein
or in the laser product’s installation guide may result in hazardous radiation exposure. To reduce the risk of
exposure to hazardous radiation:
●
Do not try to open the module enclosure. There are no user-serviceable components inside.
●
Do not operate controls, make adjustments, or perform procedures to the laser device other than those
specified herein.
●
Allow only HP Authorized Service technicians to repair the unit.
Power supply and power cord set requirements
Power supply class I grounding requirements
For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the
system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide
adequate fault protection. Only use the power cord supplied with this product or an HP Inc. authorized
replacement.
26
Chapter 4 Safety notices for desktops, thin clients, and personal workstations
Brazil notice
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua
aterramento (três pinos), conforme a norma nbr abnt 5410,visando a segurança dos usuários contra choques
elétricos.
Denmark
Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
Finland
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Norway
Apparatet må tilkoples jordet stikkontakt.
Sweden
Apparaten skall anslutas till jordat uttag.
Power supply requirements
The power supplies on some products have external power switches. The voltage select switch feature on the
product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on
those products that do not have external power switches are equipped with internal circuits that sense the
incoming voltage and automatically switch to the proper voltage.
For safety reasons, use only the AC adapter provided with the unit or an authorized replacement adapter from
HP Inc. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl.
For use in Norway
This product is also designed for an IT power system with phase-to-phase voltage 230V.
Power cord set requirements
The power cord set received with the product meets the requirements for use in the country where the
equipment was originally purchased. Use only the power cord provided with the unit or an authorized
replacement power cord from HP Inc. or an approved HP Inc. source. Replacement part numbers may be found
at http://www.hp.com/cgi-bin/hpsupport/index.pl.
Power cord sets for use in other countries must meet the requirements of the country where you use the
product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or
service provider.
WARNING!
Do not use power cords from other products.
Mismatched power cords may result in a shock and fire hazard.
The requirements listed below are applicable to all countries:
1.
The power cord must be approved by an acceptable accredited agency responsible for evaluation in the
country where the power cord set will be installed.
2.
The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m
(6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power
cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG.
Power supply and power cord set requirements
27
The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or
against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits
from the product.
WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in
any manner, replace it immediately. Damaged cords may result in user exposure to hazards.
Japan power cord requirements
For use in Japan, use only the power cord received with this product.
CAUTION:
Do not use the power cord received with this product on any other products.
Pinch hazard
WARNING!
Observe pinch hazard areas. Keep fingers away from closing parts.
TV antenna connectors protection
External television antenna grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is
electrically grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper
electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Lightning protection
For added protection of any product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product from lightning and power line surges.
28
Chapter 4 Safety notices for desktops, thin clients, and personal workstations
Table 4-1 Antenna Grounding
Reference
Grounding Component
Electric Service Equipment
Power Service Grounding Electrode System (NEC Art 250, Part III)
Ground Clamps
Grounding Conductors (NEC Section 810.21)
Antenna Discharge Unit (NEC Section 810.20)
Ground Clamp
Antenna Lead-in Wire
Note to CATV system installer
This reminder is provided to call the CATV systems installer’s attention to section 820.93 of the National
Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable
shield shall be connected to grounding system of the building, as close to the point of cable entry as practical.
TV antenna connectors protection
29
China safety notices
China: Altitude notice
Altitude warning for products not certified for use in >5000 m
Icon
Description
China: Tropical warning notice
Tropical warning for products not certified for use in tropical regions.
Icon
30
Description
Chapter 4 Safety notices for desktops, thin clients, and personal workstations
Germany acoustics notice
Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779)
Product noise emission data can be found in the product related “IT ECO Declarations” at Internet address:
http://www.hp.com/go/ted
Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die
Schallemissionswerte der Produkte können in den produktbezogenen “IT ECO Declarations” auf folgender
Internet Adresse gefunden werden: http://www.hp.com/go/ted
使用過度恐傷害視力
注意事項:
(1) 使用 30 分鐘請休息 10 分鐘。
(2) 未滿 2 歲幼兒不看螢幕，2 歲以上每天看螢幕不要超過 1 小時。
Germany acoustics notice
31
Les appareils numériques de classe B satisfont à toutes les exigences du
Règlement canadien sur les appareils perturbateurs, CAN ICES-3 (B) / NMB-3
(B). Si cet appareil possède une capacité WLAN ou Bluetooth, Le présent
appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil ne doit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Exposition aux rayonnements radiofréquences: La puissance de sortie rayonnée de cet
appareil est inférieure aux limites d'exposition de radiofréquences d'Industrie Canada.
Néanmoins, le dispositif doit être utilisé de telle manière que le potentiel humain soit
réduit au minimum pendant l'opération noemale.
Pendant le fonctionnement normal des tablettes PC et des ordinateurs portables avec
des écrans de moins de 30.5 cm (12 pouces): Pour éviter la possibilité de dépasser les
limites d'exposition radioélectrique d'Industrie Canada, la proximité humaine des
antennes ne doit pas être inférieure à 2.5cm (1 pouce). Pour identifier l'emplacement
des antennes sans fil, reportez-vous aux guides d'utilisation fournis avec votre
ordinateur.
Pendant le fonctionnement normal des ordinateurs portables avec des écrans de plus
de 30.5 cm (12 pouces): Pour éviter la possibilité de dépasser les limites d'exposition
de radiofréquences d'Industrie Canada, la proximité humaine des antennes ne doit pas
être inférieure à 20 cm (8 pouces) L'écran de l'ordinateur est fermé. Pour identifier
l'emplacement des antennes sans fil, reportez-vous aux guides d'utilisation fournis
avec votre ordinateur.
Avertissement:
1) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux;
2) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes
5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.;
3) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande
5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour
4)
l’exploitation point à point et non point à point, selon le cas.
De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars
de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la
priorité) pour les bandes 5250-5350 MHz
et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des
dommages aux dispositifs LAN-EL.
5
Environmental notices for notebook and
tablet computers
This chapter provides country- and region-specific environmental notices and compliance information. Some
of these notices may not apply to your product.
Electronic hardware, packaging and battery recycling
HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and
rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle.
For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/.
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead, you should
protect human health and the environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment. For more information, please contact
your household waste disposal service or go to http://www.hp.com/recycle.
Brazil alkaline battery disposal
Icon
Não descarte o
produto eletrônico
em lixo comum
Description
Este produto eletroeletrônico e seus componentes não daven ser descartados no lixo comum, pois embora
estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que
em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o
usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas
em lei. Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento
comercial ou rede de assistência técnica autorizada pela HP.
Para maiores informações , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar
Brazil hardware recycling information
Icon
Description
Este produto eletroeletrônico e seus componentes não daven ser descartados no lixo comum, pois embora
estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que
em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o
usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas
em lei. Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento
comercial ou rede de assistência técnica autorizada pela HP.
32
Chapter 5 Environmental notices for notebook and tablet computers
Icon
Description
Não descarte o
produto eletrônico
em lixo comum
Para maiores informações , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar
ENERGY STAR® Certification (select models only)
ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and
individuals save money and protect our climate through superior energy efficiency. Products that earn the
ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements
set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, HP Inc. has followed the U.S.
EPA’s enhanced product certification process to ensure that products marked with the ENERGY STAR logo are
ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY
STAR-certified computers:
A key ENERGY STAR requirement for computer products is power management features that significantly
reduce energy consumption when the product is not in use. Power management allows a computer to
automatically enter a low power “sleep” mode, or other low power mode, after a defined period of
inactivity. The power management features have been preset as follows when the computer is operating on
AC power:
Computer type
Time to activate display sleep
mode
Time to activate computer
sleep mode (minutes)
Resuming from sleep mode
Notebooks, Mobile
Workstations
Less than or equal to 15
minutes (varies by model)
Less than or equal to 30
minutes (varies by model)
Product will exit sleep mode
when the power/sleep button is
pressed.
If Wake-on-Lan (WOL) is
enabled, the system can
resume from sleep in response
to a network signal.
Tablets/Slates
Less than or equal to 1 minute
Not applicable
Not applicable
For computers that support an always-on, always-connected use profile where internet access is available
(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in
the ENERGY STAR Computer Program Requirements) are provided that consume very little power (
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Tagged PDF                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:09:06 15:43:25+08:00
Creator Tool                    : AH XSL Formatter V6.2 MR6 for Windows (x64) : 6.2.8.19325 (2015/01/06 12:40JST)
Modify Date                     : 2017:02:24 14:19:39+08:00
Metadata Date                   : 2017:02:24 14:19:39+08:00
Format                          : application/pdf
Description                     : Cheetah tools build R5.28.0-final created on July 20, 2016. 06:09 PM
Title                           : Regulatory, Safety, and Environmental Notices User Guide
Producer                        : Antenna House PDF Output Library 6.2.640 (Windows (x64))
Trapped                         : False
Document ID                     : uuid:dd0ed400-394c-405a-bf9d-e01a384b7b3a
Instance ID                     : uuid:5d778c4e-38f5-4a69-bb1c-883c69c28d7c
Has XFA                         : No
Page Count                      : 70
Language                        : EN
Subject                         : Cheetah tools build R5.28.0-final created on July 20, 2016. 06:09 PM
Creator                         : AH XSL Formatter V6.2 MR6 for Windows (x64) : 6.2.8.19325 (2015/01/06 12:40JST)

EXIF Metadata provided by EXIF.tools