Iolan Systems LA-XXWPRXKYMX Security Badge Reader User Manual II
Iolan Systems Inc. Security Badge Reader II
Users manual
Iolan Systems, Inc. 912 ½ E 37TH ST Austin TX 78705-1808 Tel: (512) 708 10 71 Fax: (512) 708 10 91 SALES SPECIFICATIONS LA-XXW-PRXKY-MX CONCEPT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. December 12, 2000 The user is warned that any changes or modifications not expressly approved by Iolan Systems, Inc. could void the user’s authority to operate the LA-XXW-PRXKY-Mx Badge reader. www.iolan.com Page: 1 LA-XXW-PRXKY- Mx 1. Contents 1. CONTENTS ...................................................................................................................................................2 2. PURPOSE OF THIS DOCUMENT...............................................................................................................3 3. DESCRIPTION OF THE READER..............................................................................................................3 4. DATA AND RELATION WITH TC NETWORK........................................................................................3 5. TECHNICAL DATA .....................................................................................................................................4 6. PARAMETERS OF THE MODULE ............................................................................................................5 7. DIMENSIONS OF THE MODULE: .............................................................................................................5 8. CONNECTING..............................................................................................................................................6 9. WIEGAND PROTOCOL ..............................................................................................................................6 9. WIEGAND PROTOCOL ..............................................................................................................................7 10. CHARACTER COMPOSITION.............................................................................................................7 11. METHOD OF SENDING AND TIMING ...............................................................................................8 ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 2 LA-XXW-PRXKY- Mx 2. Purpose of this document This document gives a full explanation of the possibilities of the LA-XXW-PROXKEY-MC. This information can be used, for example, in sales documentation. 3. Description of the reader The LA-XXW-PROXKEY-MC is a ‘wallmount-module,’ a reader for MIFARE® tags. The module is designed for identification purposes. It uses a Wiegand data-interface to read a card number, or any other kind of data, and to send it to the connecting unit. There are three indicators: red, green and yellow. The yellow lamp blinks when the card is successfully read. A buzzer is available to give signals as programmed 4. Data and Relation with TC Network The reader can be connected to a network as shown in this scheme: BEHEER PC MET IOLAN_TC ITEM : NETWORK LA-WIW-PROXKEY-B PC-LAN NETWERK SERVER MET DATABASE EENVOUDIGSTE OPSTELLING PC MET IOLAN_TC SYSTEEM MET MEERDERE MODULEN SPANT 4 KANAALNUMMERS DIENEN ALS VOORBEELD LA-TCR-RSOMZ-B SPANT 3 SPANT 2 PC MET IOLAN_TC LA-TCR-RSOMZ-B SPANT 1 RS232-KABEL K8 220Vac LA-TCB-2WI-2I-2R K9 LA-TCK-2WI-4I-2Y K10 K11 LA-TCB-PANEL 220Vac LA-TCK-2WI-4I-2Y LA-TCI-RSOMZ-A LA-WIW-PROXKEY-B 2X LA-WIW-PROXKEY-B LA-WIX-PROXKEY-M GEBOUWAUTOMATISERING DISPLAY MODULE ANALOGE INPUTS LA-CHP-8A-8S-H LA-CHP-8A-8S-V LA-CHP-8A-8S-R LA-CHP-8A-8S-G LA-CHR-8I-8Y DIGITALE INPUT EN OUTPUT PROJECTNAAM : STANDAARDISERING IOLAN NETWERK ONDERWERP : LA-TCB-8AN LA-CHR-16I-16Q LA-WIW-PROXKEY-B IOLAN K12 LA-TCX-DISPLAY LA-WIW-PROXKEY-B ISI Mifare Reader XXW Wiegand II.doc DEEL : NETWERKSYMBOLIEK www.iolan.com GET. E.LEMM GEW. GEW. GEW. 13-10-1997 PROJECTNR. TEKENING NR. R086 E003 Page: 3 LA-XXW-PRXKY- Mx 5. Technical data Input Input Technical data WI interface Reading distance Operating frequency Data-transport transmitting speed FCC ID Security Possibilities Transponders Indicators Mechanical aspects Material housing Connection to wall Cable connectors Protection Temperature Installation Connectors Mounting place Ordering information Type Order number • 4.5 to 24 Volt +/- 10%. The power input is included in a 6 pin connector. In cooperation with IOLAN-modules the power is supplied. • 100 - 150 mA. (rest – reading / writing tag) • • • • • • 6 pins connector with: 2x power supply 2x lamp switcher 2x data. Wiegand ‘clock-data’ Data structure according to ISO 7811/2-1986 TRACK 2 25mm typical, min 10mm max 35mm met transponder types : MF1S50, MF1-P60 en MF1-L10 • 13,56 Mhz. • 106kBd • • OCQLA-XXWPRXKYMX Data encrypted, protected against recording and ‘replay-attack’. • Can read from MIFARE® card types 1, 2, and 3. • Reader can hold one key (A or B) and one read location for transponder-identification. • Flexible transponder-code length. • One LED with options: Red, Green. For logistic matters. E.g.: red: no access; green: access allowed. • Panel can turn LED’s on or off. • Typical W-housing • Black plastic housing, ABS plastic house. • Dimensions (without connectors; HxBxL mm ) 21x71x71mm. See drawing R086EF02. • 2x 3mm opening on 60mm distance. See drawing R086EF02. • Max. diameter 1.5 mm2 • Connectors 1x6 pins • When connector-protected IP66. • Stock -10..70 o Celsius; 14..158 Fahrenheit • Operating temp -10..50 o Celsius; 14..122 Fahrenheit 6 Pins or 9 Pins , Ordernumber: EC220004 ! • When mounting, outside connector must be protected with lacquer, or the edges must be made watertight. LA-XXW-PRXKY-MX LA140110 ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 4 LA-XXW-PRXKY- Mx 6. Parameters of the module There are no switches on the module; however, according to the MIFARE protocol the readers must be personalized. There is a procedure available which accomplishes this. During this personalization-procedure, the key and pointers are downloaded. The key is necessary to gain access to an application on the transponder. The pointers determine where the information is located. The reader is constructed in such a way that downloaded keys can never be read from the reader; reading from the reader is physically impossible; encryption also negates this possibility. 7. Dimensions of the module: * For XXW 6 pin connector will be replaced by 9 pin connector ! ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 5 LA-XXW-PRXKY- Mx 8. Connecting 6 PIN CONNECTOR FOR PIN 4 TO 9 Back of BadgeReader 1 2 3 4 5 6 7 8 9 Connections to Panel +12Volt Lamp Red Internal pull-up to 5 volt. ‘Pull down’ → LED: on Lamp Green data No Internal pull-up Open collector output. Pull down → data active Clock/data 0 Volt ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 6 LA-XXW-PRXKY- Mx 9. Wiegand protocol This version of the IOLAN mifare readers sends out data according to the Wiegand protocol. Sending a string of digits with a maximum length of 16 is possible. 10. Character composition Immediately after reading a card the reader sends out a string. This string is composed according to ISO 1711/2 track 2: ITEM : CONFIDENTIAL CHARACTER DEFINITION * ALL CHARACTERS ACCORDING TO ISO 7811/2-1986 TRACK 2 LIST : CHARACTER TEXT IN DRAWINGS UNUSED START UNUSED FIELD UNUSED STOP FIELD IS THE ABREVIATION FOR 'FIELD SEPARATOR' * EXAMPLE : MESSAGE IS : TWO FIELDS : 00000000000000000 EDGE IOLAN DIGIT DIGIT DIGIT DIGIT DIGIT DIGIT DIGIT DIGIT DIGIT DIGIT UNUSED CHARACTER START SENTINEL UNUSED CHARACTER FIELD SEPARATOR UNUSED CHARACTER END SENTINEL LSB MSB PARITY 1* FIELD 1 = "12" FIELD 2 = "3" 11010 10000<"1"> START SENTINEL GEBOUWAUTOMATISERING BITSTREAM * INCLUDING PARITY DISCRIPTION 01000 10110 <"2"> 11001 11111 01101 <"3"> FIELD SEPARATOR PROJECTNAAM : STANDAARDISERING IOLAN NETWERK ONDERWERP LA-IOB-PROXKEY 00000000000000000 EDGE END SENTINEL GET. E.LEMM 28-08-1995 PROJECTNR. GEW. DEEL : MAGSTRIPE INTERFACE DATA CHARACTER DEFINITION GEW. GEW. TEKENING NR. S041 E102 The string forwarded by the LA-WIW-PROXKEY-M is default: (edge) (edge) • The length of the string is defined in the EEPROM and is variable. Standard the length is set to 10 digits. • The LRC is the XOR of all data characters. • The ‘edge’ is 2 characters long. • There is no ‘Card-load’ signal. ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 7 LA-XXW-PRXKY- Mx • D0 ..D9 is the card identification - number. 11. Method of sending and timing The to be transmitted data is split up into characters and they are send out one by one Each character gets its own paritybit. The string as a whole gets an extra parity-character. The character structure is explained later in this document. A character consists of 5 bits. 4 databits and 1 paritybit. These are transmitted 1 by 1: 1. Dataline setup 2. clockline goes low. 3. clockline goes up This gives the following pattern: file:R086EE01.BMP • • • • • The upper signal line is the clockline. (connector 2) The lower signal line is the dataline. (connector 3) The setuptime for data 3..5 mS. The clock low period is 3..5 mS The timelap the data remains up after going up of the clock is 3mS ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 8 LA-XXW-PRXKY- Mx A whole string of 10 characters would look like this: file:R086EE02.BMP In this case card number 0404040400 is send. • The upper signal line is the clockline. (connector 2) • The lower signal line is the data line. (connector 3) ISI Mifare Reader XXW Wiegand II.doc www.iolan.com Page: 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 9 Creator : Microsoft Word Create Date : Wednesday, December 13, 2000 9:08:26 AM Title : II.PDF Author : Michael Hill Producer : Acrobat PDFWriter 3.02 for Windows Subject : Wiegand IIEXIF Metadata provided by EXIF.tools