Iradio Electronics DM-568 Digital Two-way Radio User Manual
Iradio Electronics Co., Ltd. Digital Two-way Radio
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3541563 |
| Application ID | vb8hVeVn9RPcoAIP3GTo6A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.16kB (401941 bits) |
| Date Submitted | 2017-09-01 00:00:00 |
| Date Available | 2017-09-01 00:00:00 |
| Creation Date | 2017-08-01 16:33:47 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-09-01 11:03:09 |
| Document Title | DM580&560英文说明书-更改 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
| Document Author: | xm07071 |
DMR
Digital Two-Way Radio
DM-580
Preface
Thanks for your favor in
product.This manual
provides guidance for you to quickly know how to use
this product.
To avoid bodily injury or property loss caused by
misoperations. please carefully read this manual before
using our product.
This manual is applicable to the following product: DM-580.
Main Function
UHF:400-470MHz
1000 Channels
250 Zones
Message Function
CTCSS/DCS
Welcome to use iradio digital two-way radio.
VOX Function
DTMF Function
High/Low power Selection
Scan Function
Low Power Alert
Emergency Alarm Function
Digital Encryption
Side Key P1/P2 Can be Customized
Single CallăGroup CallăAll Call
4A403.325
VOX
CH 1
Zonel
MENU
GHI
PQRS
DEL
BACK
ABC
JKL
TUV
CAPS
DEF
MNO
WXYZ
CONTENTS
Section 4..............................................................................................................16-48
Emergency Alarm Function and operations............................................................17-20
Section 1..............................................................................................................01-02
Emergency type.................................................................................................17
Attention....................................................................................................................01
Emergency Mode...............................................................................................18
Unpacking and device checking.................................................................................02
Operation of sending emergency alarm............................................................19
Section 2..............................................................................................................03-10
Operation of receiving emergency alarm..........................................................19
Familiar with the radio...........................................................................................04-05
Operation of replying emergency alarm............................................................20
Preparation before using.......................................................................................06-10
Menu Functions and Operations............................................................................21-30
Charging the battery.......................................................................................... 06
Character input..................................................................................................21
Attaching the battery..........................................................................................07
English character mode.....................................................................................21
Attaching the antenna........................................................................................08
Radio Detection.................................................................................................22
Attaching the belt clip........................................................................................09
Send a Radio Detection.....................................................................................22
Attaching the audio accessory/programming cable..........................................10
Setting contacts person....................................................................................23
Section 3..............................................................................................................11-15
Call recording function......................................................................................23
Basic operations........................................................................................................12
Missed call screen.............................................................................................23
Turning the radio on/off.....................................................................................12
Store/Delete Missed,Answered,Outgoing list name/ID.....................................23
Adjusting the volume........................................................................................12
Call prompt operation.......................................................................................24
Selecting a zone................................................................................................12
Receiving & Confirm call prompt......................................................................24
Channelsăusers IDătalk group ID selection...................................................12
Message function..............................................................................................24
Call......................................................................................................................12-15
Encryption.................................................................................................................25
Private Call.........................................................................................................13
Basci encryption................................................................................................25
Group Call..........................................................................................................14
DTMF..................................................................................................................26
All Call................................................................................................................15
Make a DTMF call......................................................................................................26
Anti-Theft..................................................................................................................26
Kill Function...............................................................................................................26
Time..........................................................................................................................41
Revival Function........................................................................................................27
Date...........................................................................................................................41
Scanning list ........................................................................................................27-30
Radio Info.............................................................................................................42-43
Check the Members of Scanning List..........................................................................28
My number................................................................................................................42
Scanning indicator and method..................................................................................28
Versions....................................................................................................................43
There are two scaning methods..................................................................................29
Program Radio.....................................................................................................43-48
Start/stop Scanning....................................................................................................29
RX Frequency............................................................................................................44
Reply ........................................................................................................................30
TX Frequency ......................................................................................................44-45
Utilities.................................................................................................................31-41
Channel Name...........................................................................................................45
Radio Settings...........................................................................................................31
TOT...........................................................................................................................46
Talk around...............................................................................................................32
CTC/DCS..................................................................................................................46
Tones/Alerts..............................................................................................................33
Encode.................................................................................................................46-47
All Tones...................................................................................................................33
Decode......................................................................................................................47
Keypad Tones............................................................................................................34
Color code............................................................................................................47-48
Power Level Setting..............................................................................................34-35
Repeater Slot............................................................................................................48
Back light...................................................................................................................35
Technical Parameter...........................................................................................49-51
Squelch.....................................................................................................................36
General...............................................................................................................49
Intro Screen...............................................................................................................37
Receiving............................................................................................................50
Keypad Lock..............................................................................................................37
Transmitting........................................................................................................51
Language..................................................................................................................38
Guarantee.................................................................................................................52
LED indicator light.....................................................................................................38
VOX..........................................................................................................................39
Password Lock..........................................................................................................40
Clock....................................................................................................................41-42
User's Manual
Attention
Unpacking and device checking
Preparation before using
ATTENTION
Please read the following brief instructions, if you non-compliance with these rules may
cause danger or violate the law.
1.Obey the government regulation before using this radio, improper operation may violate the
law and will be punished.
2.Turn off the radio before entering flammable or explosive areas.
3.Do not charge or change the battery in flammable or explosive areas.
4.Do not use radio which antenna is damaged, touching of the damaged antenna will cause heat injury.
5.Do not attempt to open the radio: the maintenance work must be done by technical expert only.
6.To avoid troubles caused by electromagnetic interference or electromagnetic compatibility,
please turn off the radio in places where have the bannerâ Do not use wireless equipment,â
Such as hospital and other health-care areas.
7.In a car with a safety airbag, do not put the radio within the scope of the airbag deployed.
8.Do not put the radio under the direct sunshine or hot areas.
Unpacking and device checking
Before using:
1.Please check whether the packing box is damaged or not.
2.Please unpack packing box carefully,and confirm the following list of items are in the box.If any
items are missing or have been damaged during shipment,please contact dealers immediately.
Supplied accessories
Antenna (1)
Li-ion battery (1)
Belt Clip (1)
Charger (1)
9.When you transmit the signaling, please keep away from radio's antenna for 3.1CM at least.
10. If you smell radio appears fumes or burning, please shut off itâs power immediately and
contact with your local dealer.
radio
čžčżŞćŹ§
C E R T I F I C AT I O N
Verification (1)
User's Manual (1)
Noteďź
The antenna may vary with different frequency bands.And the frequency band is marked on the
label of antenna.If no,please refer to the label on the radio unit for frequency band information.
01
02
Familiar with the radio
User's Manual
Antenna
with threaded head. for
transmitting and receiving
Familiar with the radio
Power/volume knob
LED indicator light
To power on/off and adjust the volume.
The indicator light turns red when
Rotate it clockwise, a "click" sound is
heard and a "Du" tone prompts the
transmit, turns green when receive.
radio power on, continue to rotate it to
It blinks red when the battery
Preparation before using
Basic operations
adjust the volume. Rotate it counter-
capacity is low, and blinks green
clockwise until a "click" sound is heard,
when scanning.
it powers off.
Speaker
sound output
4A403.325
VOX
CH 1
Zonel
MENU
Microphone
sound input
BACK
P1
P2
GHI
PQRS
DEL
ABC
JKL
TUV
CAPS
DEF
MNO
WXYZ
04
Preparation before using
Charging the battery
Use only the charger and battery specified by
process. Charge diagram
PTT switch
Mic/speaker jack/
programming port
charger, LED can indicate the charging
Used to connect headset or
external programming cable.
Programmable via PC
Side key
programming software.
Li ion battery
For charging the radio
The battery release button
Notice: Either Long-press or Short-press of Side-key /P1-key /P2-key can be set by program
software.
05
Procedures
1.Connect the power adapter to AC socket.See arrow 1.
2.Plug the power adapter into the rear jack of the charger.See arrow 2.
3.Place the radio with the battery attached,into the charger.See arrow 3.
LED Indicator
Status
Red
Charging
Green
Fully charged
06
Attaching the battery
Attaching the antenna
1)Slide the battery into the radio`s slot.(Arrow 1)
1)Turn the antenna clockwise to fasten it.
2)Buckle the battery until the battery and radio were tightly fixed. (Arrow2)
2)To remove the antenna,rotate it counter-clockwise.
3)To remove the battery,turn off the radio first.Then release the lock catch
to unlock the battery. (Arrow2)
4A403.325
VOX
CH 1
Zonel
MENU
4 GHI
7 PQRS
DEL
07
2 ABC
5 JKL
8 TUV
0 CAPS
4A403.325
BACK
MENU
3 DEF
6 MNO
9 WXYZ
4 GHI
7 PQRS
VOX
CH 1
Zonel
DEL
BACK
2 ABC
5 JKL
8 TUV
0 CAPS
3 DEF
6 MNO
9 WXYZ
08
Attaching the belt clip
Attaching the audio accessory/programming cable
1)Using two screws align the screw holes on the belt clip with those on the radio`s body,and
1ďźUsing screw-driver to release the screw.
2ďźAlign the plug with the accessory jack.
then tighten this two screws.(Arrow 1)
2)Loosen the screw set to remove the belt clip.(Arrow 2)
3ďźTighten the screw on the plug.
MEN U
BACK
GHI
PQRS
DEL
ABC
DEF
JKL
MNO
TUV
CAPS
WXYZ
MEN U
BACK
GHI
PQRS
DEL
ABC
DEF
JKL
MNO
TUV
WXYZ
CAPS
To remove accessories,loosen the screw.
Caution:When you are using as external accessory,waterproof performance of the
radio may get affected.
09
10
User's Manual
Basic operations
Turning the radio on/off
Rotate the radio on-off/volume control knob,clockwise/counter-clockwise until a click is heard to
turn the radio on/off.
Adjusting the volume
After turning the radio on,rotate the radio on-off/volume control knob clockwise to increase the
call volume,or counter-clockwise to decrease it.
Basic operations
Private CallăGroup CallăAll Call
Selecting a zone
A zone is a group of channels exhibiting the same property,and is programmed by your dealer.
The radio supports up to 64 zones.each with a maximum of 16 channels.You may select a zone
through any of the following methods:
1.Press
MENU
key to enter menu,go to the menuâZoneâ, and use the [
or
] key to select your
desired zone.
2.You may quickly toggle to your desired zone by pressing the
MENU
key to confirm.
Channelsăusers IDătalk group ID selection
Select Channelsăusers IDătalk group ID by pressing [
or
] key.
Call
To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to 5
centimeters away from your mouth.
12
Private call
Group Call
Transmitting a private call
Transmitting a group call
Transmitting a private call through any of the following methods:
You may transmit a group call through any of the following methods.
!
1.Transmitting a call to the preset contact
#
In the home screen,hold down the [PTT] key to transmit a private call to the private call contact
In the home screen,hold down the [ PTT ] key to transmit a group call to the group call contact
preset for the current channel.
preset for the current channel.
Note: Your dealer may preset a contact for each digital channel. The preset contact could
2.Transmitting a call through contact list or call logs
be a private call contact,a group call contact or an all call contact.
1)Transmitting a call through contact list or call logs
Answered/Outgoing list.
MENU
Answered/Outgoing list.
3)Use the [
or
] key to select the private call contact you want to call.
Receiving and responding to a private call
1)When a private call is received,the LED indicator light for green light.
2)In the home screen,top line will display RSSI etc status icon,In the display area below, the
first line shows private call + User`s name/ID,next line shows a private call icon.
3)You may hold down the [ PTT ] key within the preset time period to call back.If you do not
respond to a received private call, your radio`s Missed Call Log will display the missed
MENU
2)Use the [
or
] key to select the group call contact you want to call.
3)Hold down the [ PTT ]key to transmit the group call.
Receiving and responding to a group call
1)When a group call is received,the LED indicator light for green light.
2)In the home screen,top line will display RSSI etc status icon,In the display area below, the first
line shows group call + User`s name/ID,next line shows a group call icon.
4)You may hold down the [ PTT ] key within the preset time period to call back. If you do not
respond to a received group call,your radio`s Missed Call Log will display the missed calling
number.
calling number.
13
14
All Call
User's Manual
Transmitting an all call
Method are the same as those in transmitting a group call.
Note: You can transmit an all call only when it is enabled by your dealer. And you cannot
respond to an all call.
Calls on analog channels
To transmit on an analog channel, hold down the [ PTT ] key and speak into the microphone.
To receive, release the [ PTT ] key.
15
Emergency Alarm Function and Operations
Menu Functions and Operations
Emergency Alarm Function
Emergency Mode
In case of an emergency, you can use the feature to ask for help from your companion or control
center.The emergency process has the highest priority.You can make emergency operation even
when your radio is transmitting or receiving.
To enable the feature on a channel.an emergency system must be assigned to the channel via the
programming software.In addition,the system name,emergency type and emergency mode are
settable via the programming software.
Emergency Mode
Description
Emergency Alarm
In this mode,you can send alarm information
to your companion or control center by pressing
the programmed emergency key, but you cannot
talk with them.
Emergency type
For each emergency mode,there are four emergency types available.You can select one of them
via the programming software.
17
Emergency Type
Description
Disabled
Turn off the function of emergency alarm
Regular
In emergency mode,the radio will give
audible and visible indication.
Silent
In emergency mode,the radio won`t give any
audible or visible indication.
Silent with Voice
In emergency mode,the radio won`t give any
audible or visible indication,but will receive
voice from the companion or control center
automatically.
Emergency Alarm with Call
Emergency Alarm with Voice to Follow
In this mode,you can send alarm information
by pressing the programmed emergency key,
then press [PTT ] and speak into the microphone,
allowing your voice and background noise to
be transmitted,release the [ PTT ] key to
receiving.
In this mode,press the programmed emergency
key to go to the revert channel, then you can
speak into the microphone, allowing your voice
and background noise to be transmitted
automatically(You do not need to hold down
the [PTT] key).
18
Operation of sending emergency alarm
Operation of replying emergency alarm
1.Press preset key to turn on the emergency alarm function.
2.Home screen will display
3.While receiving confirmation of emergency alarm, it will prompt Emergency call tone and the
LED indicator light will flashing green color.
Emergency Alarm
1)The screen display emergency alarm success. or if the radio didn`t received any confirmation
of emergency alarm and used all the number of replication,will send a prompt tone, then display
emergency alarm failure on screen.
2)The radio exit emergency alarm mode,and back to the home screen.
Emergency Alarm with Call
Refer to the description of Emergency Alarm with Call.
Emergency Alarm with Voice to Follow
Refer to the description of Emergency Alarm with Voice to Follow.
1.Press any key to stop all sounds of receiving an emergency alarm.
2.Hold the radio approximately 2.5 to 5 centimeters away from your mouth. If you turn on the
function of Channel free indication tone, when you release [ PTT ] key, you will heard a short
prompt tone,indicates that this channel can use now.
3.Press [PTT] to start a call,LED indicator light flashing red color.The radio are on the emergency
alarm mode.
4.Release the [PTT] to receiving the call,when the sender part reply,LED indicator light flashing
green color. You will see the group call iconăTalk Group ID and sender part ID.
5.After finish the call, short press[ MENU ]key, then press preset key to turn off the alarm.
6.Radio back to home screen.
Operation of receiving emergency alarm
1.While you receiving emergency alarm,the alarm and number of receiving will interchanging
display with sender`s name and ID.
2.Sending one prompt tone and LED indicator light flashing red color.
3.If activated,radio will confirm the emergency alarm automatically. While you receiving the
emergency alarm,the screen will display the prompt of emergency alarm,meanwhile you can
not receive other prompt or other calling,until you exit the emergency alarm mode.
Caution:
19
Short press[
MENU
]key, then press preset key to turn off the alarm.
20
Menu Functions and Operations
Radio Detection
Character input
Activation function allows you to determine whether there are other walkie talkies in the system
You can use 3Ă4 alphanumeric keyboard to To access the radio`s function. While using
keyboard to input user`s name or message,have three mode to select:
1.English character mode.
2.Chinese input method mode.
3.Digital input mode
While input ID by keyboard,only can using digital input mode.
is active,and won`t disturb the walkie talkie users.This feature only suitable for user`s name or ID.
English character mode
Some characters need to press a key several times,The following table shows the number
of times you need to press a key to get the desired character.
Button
21
@ & '
A B C
D E F
10
11
12
13
Send a Radio Detection
1.Press [ MENU ] to enter menu mode.
2.Go to Call Log, press [ MENU ] to confirm.
3.Go to the user`s name or ID that you required.,then press[ MENU ]to confirm.Or go to Manual dial,
press [ MENU ] to confirm,edit ID number then press [ MENU ] key.
4.Go to radio detection,,then press [ MENU ] to confirm.
5.The screen display radio detection: , Indicates that the intercom is being
detected.LED indicator light flashing red color.
6.Waiting confirmation.
7.If the target radio is active in the system, you will hear a prompt voice, the screen display target
radio have responded.
Or if the target radio is not active in the system, you will hear a prompt voice, the screen display
target radio didn`t responded.
8.Radio will back to user`s name or ID screen. If you press [ MENU ] while waiting confirmation, you
will hear a prompt voice and the radio will terminate all retry and exit the walkie talkie
detection mode.
Long press â0â to switch the case of character.
Backspace,can delete one character or one number.
Space key,long pressâ#âcan switch input method.
22
Setting contacts person
Call prompt operation
Call log provides âAddress Bookâ for radio.Each entry corresponds to an user`s name or ID for
initiating the call. In addition,Each entry is different according to the settings,consist of group
callăprivate call and all call.This radio support digital call log.
Entries in the âContactsâ show the following information:
Contacts List
New Contact
Manual Dial
This function allow you to send a prompt in order to remind receiver call back while free.
Missed call screen
Whenever you missed the call,it will display a missed calling message in home screen, you can
check or check later.
Note:If press [PTT] key while check missed call,it will initiate a call with current number.
Store/Delete Missed,Answered,Outgoing list name/ID
MENU
23
The screen will display calling party`s alias/ID when you received a call prompt.
1.You will heard a reduplicated sound,LED indicator light flashing red color.
MENU
] key then select âIgnoreâ
to exit call prompt mode.
This radio can record recent Missed, Answered, Outgoing information.You can press [Call Log]
to check and manage the recent call. While check the list, press [PTT] to initiate a call.
] to enter menu mode.
2.Press [
or
] key to Call Log, press [ MENU ] to confirm.
3.Go to the list that you want, press [ MENU ] to choose current name/ID
4.You can select store or delete.
5.If you store the ID, press[ MENU ] ,input it`s name that you want,then press [
Receiving & Confirm call prompt
2.Press and release [PTT] key to confirm call prompt,or press [
Call recording function
1.Press [
Note:This function only suitable for user alias/ID,it can sending by Call Log or manual dialing.
MENU
] to confirm.
Message function
To access this item,press the [ MENU ] key and then select [Message].
New message
You can create new text message(144 characters at most)and send it to an individual user
or to a talk group.
Quick text
Under this option there are some text message(50 entries at most).You can choose to edit
and send any entry.
InBox
The InBox can save up to 50 received messages.When the InBox is full,the earliest message
will be overwritten by the latest one automatically.
For each message,you can choose to perform any of these operations:Reply,Forward,View
\ \ ^ ! _{| _{|\ }^
24
OutBox
The OutBox can save up to 50 sent messages.When the OutBox is full,the earliest message
will be overwritten by the latest one automatically.
For each of message, you can choose to perform any of these operations: Resend,Forward,
~ \ \ ^ ! ÂÂ {| ÂÂ {|
Delete Allâ.
Drafts
The Drafts can save up to 50 sent messages.When the Drafts is full, the earliest message
will be overwritten by the latest one automatically.
For each of message, you can choose to perform any of these operations:Send, Save and
\ ^ ! \Â \Â \ }^
Encryption
DTMF
Dual Tone Multi-Frequency (DTMF) function allows you to operate the radio when there is interference
in the radio system
Make a DTMF call
1. Press and hold [ PTT ] key.
2. Input the number you need.
You can disable DTMF tone by turning off all radio prompt sound.
Anti-Theft
You can revival or kill any radio in the system. For example, you might want to disable a stolen
radio, to prevent thief using it, and enable it when you get it back.
Note: Only the radio with kill or revival function can be enable and disable.
If this function is enabled,which is beneficial to preventing other users on the channel by using
a number of encryption and decryption technologies for unauthorized eavesdropping.The launch
Kill Function
of signaling and user identification is unencrypted. The encryption must be enabled so that the
Choose Menu,
radio can transmit the signal encrypted, even if you donât have to encrypt it when receive it.
1. Press [ MENU ] key to enter the menu
2. Press [
or
] key and choose Contact list, then press [ MENU ] key to confirm, the
contacts are grouped by letter.
3. Press [
or
] key to choose the name or ID, and press [ MENU ] key to confirm.
Or press [
or
] key to choose Manual Dial, press [ MENU ] twice and input the userâs name
and ID, then press [ MENU ] to confirm.
4. Press [
or
] key to choose Radio disable, and press [ MENU ] key to confirm.
5.The screen displays: radio disable:, Indicator light turns red.
Basic encryption
Two way radio can only be assigned to one of the above encryption types. In order to decrypt
the encrypted call or data transmission, the receiver must have the same encryption key with
the transmitter.(Apply to Basic encryption)
if your radio received the call of different encryption keys or key values and keyID, then you
will receive some confused noisy.(Basic encryption)
Press the pre-programmed encryption key to turn on or turn off this function.
25
26
6. Wait for confirmation.
7. The radio will issue a prompt sound when disable the radio successfully, and the screen
displays:radio disable successfully.
The radio will issue a prompt sound as well when it fail to disable the radio. And the screen
displays: Radio disable failed.
During the process of disabling the radio, please do not press the [ MENU ] key, otherwise,
you wonât get the confirmation.
Scanning list
Revival Function
1.Press the [ MENU ] key to enter the menu.
2.Press [
or
] key and choose Scan, then press the [ MENU ] key to confirm.
3.Press [
or
] key to view/edit the scanning list. then press the [ MENU ] key to confirm.
4.Use [
or
] key to check members in scanning list.
5.If the priority channel has been set,the priority icon will appear in the left of user name,
it means the user is priority channel 1 or priority channel 2 . If the priority channel is
none N , then the radio wonât display the special icon. In a scanning list, the radio canât
have more than one priority channel 1 or priority channel 2.
Use menu function:
1.Press [ MENU ] key to enter the menu.
2.Press [
or
] key and choose Contact list, then press [ MENU ] key to confirm, the
contacts are grouped by letter.
3. Press [
or
] key to choose the name or ID, and press [ MENU ] key to confirm.
Or Press [
or
] key to choose Manual Dial, press[ MENU ] twice and input the userâs
name and ID, then press [ MENU ] key to confirm.
4. Press [
or
] key to choose Radio enable, and press [ MENU ] key to confirm.
5.The screen displays: radio enable:, Indicator light turns red.
6. Wait for confirmation.
7.The radio will issue a prompt sound when enable the radio successfully, and the screen
displays:radio enable successfully.
The radio will issue a prompt sound as well when it fail to enable the radio. And the screen
displays: Radio enable failed.
During the process of disabling the radio, please do not press the [ MENU ] key,otherwise,
you wonât get the confirmation.
27
Create the scan list and assign them to each channel or each group. There are up to 250
scanning lists available, each list is up to 16 members.
Each scanning list supports mixed analogue and digital channels. You can edit the scanning
list to add/delete the channel or set up a priority channel.
Check the Members of Scanning List
Scanning indicator and method:
When scanning, The radio will scan the current channels in a circular manner throughout the preprogrammed scanning list to find out which channel has received the signal. LED turns red and
flashes, the scanning icon will appear on the screen.
When scanning in dual modes,If the radio is in a digital channel while lock in an analogue channel,
will switch from digital mode to analogue mode automatically during the call duration.Vice versa.
28
There are two scanning methods
Reply
 Â According to pre-programmed the scanning key to turn on/off scanning or enter
Radio detect active channel/contact group when scanning, at this time radio will stay in this
the Menu and choose Scan. When you start to scan, radio will detect all channels/contact groups
channel/contact group, which called âscanning hold timeâ.
in the pre-programmed scan list.
Procedure:
}Â ÂÂ When you select an already activated auto scan channels/contact groups,radio
1. Hold the radio in a vertical position and keep one to two inches (2.5 to 5.0 cm) distance
will start to scan from the activated auto scan channel.
from the mouth. If the âchannel idle toneâ is enable, then you will hear a short prompt sound
when release the PTT button after transmitting the signal, which indicates that the channel
is idle, and waiting for your response.
Start/stop Scanning:
2.Press PTT button during the hold time, the LED indicator light turns red.
Press the scanning key which has been programmed by software or enter the menu list.
3.Release PTT button to receive the signal.
1.Press the [
4.If you didnât respond the signal during the hold time, the radio will carry on scanning.
2.Press [
MENU
or
] key to enter the menu
] key and choose Scan, then press the [
MENU
] key to confirm.
3.If the scanning function is disable, the scanning interface displays TURN ON, or if this
function is enable, the scanning interface displays TRUN OFF.
4.Press the [
MENU
] key to confirm.
5. When this function is enable, indicator light turns red and flashes, the scanning icon
appears on the screen; when this function is disable, LED indicator light and scanning
icon disappear.
29
30
Utilities
Talk around
The utilities shall consist of the following options:
This function allows the radio that continues to communicate where the repeater does
Â
not work, or the radio is out of the range of repeater while is within the call range of other
_Â
radios. That called âtalk aroundâ.
!
Press the 1750hz replay echo/talk around key which has been programmed via software,
then you can switch these two kinds of modes.
Radio Settings
 _ÂÂ
Use the menu function
 Â
1. Press Key to enter the menu
}
2.Press [or ] key and choose Utilities, then press key to confirm.
3.Press [or ] key and choose Radio Setting, then press key toconfirm.
{Â
4.then press key to confirm. and choose Talk around, then press key to to confirm.
ÂÂÂ
5.If radio is in 1750hz reply mode, you will see selected Turn off, when the radio is in talk
_ Â
around mode, you will see selected Turn on.
ÂÂ# Â
6.press key to confirm.
Â
7.The screen displays talk around icon(
Â\ _
down.
~ÂÂ
8.The interface will return to the previous options list.
Â
Even after shutdown,talk around will be remained.
), or it will disappear when this function has shut
Â
31
32
Tones/Alerts
Keypad Tones
Including the following options:
If needed, Keypad tones could be enable or disable.
}
Use the menu function:
ÂÂ#
1.Press [
] key to enter the menu
MENU
2.Press [
or
] key and choose utilities,then press key to confirm.
3.Press [
or
] key and choose radio settings, then press key to confirm.
All Tones
4.Press [
or
] key and choose tones/alerts,then press key to confirm.
If needed, all tones could be enable or disable.(Except emergency alerts tone).
5.Press [
or
] key and choose keypad tones,then press key to confirm.
Press All tones key which pre-programmed by software to turn on/off this function.
6.Press [
Use the menu function:
1.Press [
MENU
] key to enter the menu
MENU
Or press [
] key to turn on, the screen displaysâkeypad tones onâ
MENU
] key to turn off all tones, the screen displays âkeypad tones offâ.
Power Level Setting
2.Press [
or
] key and choose utilities,then press key to confirm.
There is High/Low power available for each channel.
3.Press [
or
] key and choose radio settings, then press key to confirm.
Setting:High power allow you to communicate with other radio with long distance. Low
4.Press [
or
] key and choose tones/alerts,then press key to confirm.
power allows you to communicate with other radio with short distance. Press High/Low
5.Press [
or
] key and choose all tone,then press key to confirm.
power key which has been programmed by software, you can switch high/low power.
6.Press [
MENU
Or 6.Press [
] key to turn on all tones,the screen displaysâall tones onâ
MENU
] key to turn off all tones, the screen displays âall tones offâ.
Use the menu function:
1.Press key to enter the menu
2.Press [or ] key and choose utilities,then press key to confirm.
3.Press [or ] key and choose radio settings, then press key to confirm.
4.Press [or ] key and choose Power,then press key to confirm.
33
34
5.Under the instruction to switch the power.
6.Press key to confirm high/low power
7.The interface will return to the radio setting options.
Press to return the main interface. The power level icon will be displayed on
the screen.
Squelch
Adjust the squelch level to filter useless call with low signal or when thereâs too much
background noise.
Setting:The normal value is default value, to filter (useless) call or background strictly.
However, a call from a remote location may also be filtered out.
Press the squelch level key which has been pre-programmed by software, to switch
Back light
between Normal and Tight.
You can turn on or off the screen back light according to your requirement.
Press the Back light key which has been programmed by software, to turn on/off
this function.
1.Press [
Use the menu function:
1.Press [
MENU
2.Press [
] key to enter the menu
or
] key and choose utilities,then press key to confirm.
3.Press [
or
] key and choose radio settings, then press key to confirm.
4.Press [
or
] key and choose Back light, then press key to confirm.
5.Press [
MENU
Or Press [
Use the menu function:
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press key to confirm.
3.Press [
or
] key and choose radio settings, then press key to confirm.
4.Press [
or
5.Select Press [
] key and choose Back light, then press key to confirm.
MENU
] Normal or Tight, then press key to Confirm.
6.The interface will return to the option list of radio settings option list.
] key to turn on this function when the interface displays Auto On.
MENU
] key to turn off this function when the interface displays Turn off.
Once you turn off this function, the back light of keypad and screen will be shut down.
35
36
Intro Screen
Language
If needed, Intro Screen could be enable or disable.
Radio supports the following languages:
1.Press [
MENU
] key to enter the menu
English
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose Intro Screen, then press [
4.Press [
or
] key and choose Back light, then press [
MENU
] key to confirm.
MENU
MENU
] key to confirm.
] key to confirm.
Chinese
1.Press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
MENU
] key to confirm.
5.Press [
MENU
] key to turn on,the screen displaysâIntro screen onâ
3.Press [
or
] key and choose radio settings, then press [
6.Press [
MENU
] key to turn off, the screen displays âIntro screen offâ.
4.Press [
or
] key and choose Language, then press [
5.Press [
or
] key and choose the language option, then press [
MENU
MENU
] key to confirm.
] key to confirm.
MENU
] key to
Keypad Lock
confirm.
You can lock the keypad to prevent the unexpected input.
6.The interface displays the selected language and return to the main interface.
1.Press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose Intro Screen, then press [
4.Press [
or
] key and choose Keypad Lock, then press [
MENU
] key to confirm.
MENU
] key to confirm.
MENU
] key to confirm.
LED indicator light
If needed, LED Indicator could be enable or disable.
1.Press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press key to confirm.
unlock the keypad.
3.Press [
or
] key and choose radio settings, then press [
MENU
] key to confirm.
6.The screen displays Keypad unlock and return the main interface.
4.Press [
or
] key and choose LED indicator, then press [
MENU
] key to confirm.
5.The interface displays âkeypad lockedâ. Press [
MENU
] , then press [
] Key to
5.Press [
MENU
Or Press [
37
] key to turn on,the screen displaysâAll LEDâs onâ
MENU
] key to turn off, the screen displays âAll LEDâs offâ.
38
VOX
Password Lock
This function allows you to initiate voice-activated hands-free calls on pre-programmed
1.Press [
channels. Whenever a microphone with VOX function detect voice, radio will transmit
2.Press [
or
] key and choose utilities,then press [
signals automatically with the pre-programmed period of time.
3.Press [
or
] key and choose radio settings, then press [
Press [PTT] button during the operation will disable VOX function, to re-enale the VOX
4.Press [
or
] key and choose Password Lock, then press [
function, You must do one of the following options:
5.Input the correct eight-digit number password which has been programmed by software,
 Â Â
then press [
Â!
^
MENU
] key to enter the menu
MENU
MENU
] key to confirm.
MENU
] key to confirm.
MENU
] key to confirm.
] key to confirm.
6.If the password is incorrect, the interface displays âwrong passwordâ, if the pass word
 # Â
Note:Only the radio with these functions can be enable or disable VOX.
is correct, the interface will change to the Password lock options list.
Press VOX key which has been pre-programmed by software to turn on/off this function.
7.If the first line displays âturn onâ,press [ MENU ] key to confirm, then you should input the
Use the menu function:
correct password to turn on the radio.If the first line displays âturn offâ, press If the first
1.Press [
line displays to confirm, then you can turn on the radio directly while donât have to input
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities, then press [
3.Press [
or
] key and choose radio settings, then press [
4.Press [
or
] key and choose VOX, then press [
MENU
MENU
] key to confirm.
MENU
] key to confirm.
] key to confirm.
the password.
8.Press [
or
] key and choose Change Pwd, then press [
9.Enter 8 digits new password. then press [
MENU
MENU
] key to confirm.
] key to confirm.
10.Confirm the new 8 digits password,hen press [
MENU
] key to confirm.
11.Screen displays that Password changed.
Note:The password should be 8 digits number.
39
40
Clock
4.Press [or ] key and choose Clock, then press key to confirm.
Clock settings are divided into:
5.Press [or ] key and choose date, then press key to confirm.
!
6.Press key to enter date setting interface
\
7.Press [or ] key to move right and left and choose the number you want to change,
the number turns to reverse video text, input the right number via keypad.
Time
1.Press [
8.The screen display âdate savedâ after pressing key to confirm.i
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose radio settings, then press [
4.Press [
or
] key and choose Clock, then press [
or
] key and choose time, then press [
5.Press [
6.Press [
7.Press [
MENU
MENU
MENU
MENU
] key to confirm.
MENU
] key to confirm.
] key to confirm.
] key to confirm.
] key to enter time setting interface
or
Radio Info
The Radio Info contains the following parts:
 ÂÂ!Â
~ÂÂ! ~ #Â ~^
Note: Press Back key to return the previous interface.
] key to move right and left and choose the number you want to change,
the number turns to reverse video text, input the right number via keypad.
My Number
8.The screen display âtime savedâ after pressing key to confirm.
1.Press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
Date
3.Press [
or
] key and choose radio information, then press [
MENU
1.Press key to enter the menu
4.Press [
or
] key and choose My Number, then press [
] key to confirm.
2.Press [or ] key and choose utilities,then press key to confirm.
5.The radioâs ID and name will be displayed on the interface.
MENU
] key to confirm.
MENU
] key to confirm.
3.Press [or ] key and choose radio settings, then press key to confirm.
41
42
Versions
RX Frequency
Display radio firmware version.
1.Press [
1.Press [
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose Program Radio, then press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose radio information, then press [
4.Press [
or
] key and choose Firmware Ver./CP Ver., then press [
MENU
] key to confirm.
MENU
] key to confirm.
MENU
] key to
MENU
] key to enter the menu
MENU
MENU
] key to confirm.
4.Input the correct password which has been programmed already by software.then
press [
MENU
] key to confirm.
confirm.
5.Press [
5.The radioâs version will be displayed on the interface.
6.The screen displays the current RX frequency,then press [
Program Radio
] key to confirm.
7.Press [
or
] key and choose RX Frequency, then press [
or
MENU
MENU
] key to confirm.
] key to confirm.
] key to move right and left and choose the number you want to change,
the number turns to reverse video text, input the right number via keypad.
This Option allows you to edit the channel content.
8.Press key to save the new frequency, the screen display âRX frequency savedâ.
The editable channel content contains the following options:
Note: Editing frequency will be limited within the frequency range setted by programming
 ÂÂÂÂ
software, If the frequency is less than the minimum of the frequency range, the radio
 ÂÂÂÂ
will take the minimal value, conversely, when it greater than the maximum, take the
Â!
maximal value of the frequency range.
! Â !
\Â
TX Frequency
1.Press [
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
]key and choose Program Radio,then press [
43
# Â
MENU
] key to enter the menu
MENU
] key to confirm.
MENU
]key to confirm.
44
4.Input the correct password which has been programmed already by software.then
TOT
press [
1.Press [
MENU
5.Press [
] key to confirm.
or
] key and choose TX Frequency, then press [
6.The screen displays the current TX frequency,then press [
7.Press [
or
MENU
MENU
] key to confirm.
] key to confirm.
] key to move right and left and choose the number you want to
change, the number turns to reverse video text, input the right number via keypad.
8.Press [
MENU
] key to save the new frequency, the screen display âTX frequency savedâ.
Note:Editing frequency will be limited within the frequency range setted by programming
software, If the frequency is less than the minimum of the frequency range, the radio
will take the minimal value, conversely, when it greater than the maximum, take the
] key and choose utilities,then press [
3.Press [
or
] key and choose Program Radio, then press [
MENU
] key to confirm.
MENU
] key to confirm.
4.Input the correct password which has been programmed already by software.then
press [
MENU
] key to confirm.
5.Press [
or
] key and choose TOT, then press [
MENU
] key to confirm.
6.The screen displays infinite, 15S,30S.....555S(Increasing 15S each time),Press [
MENU
key to choose the option you want.then The interface displays âTOT savedâ after
MENU
] key.
CTC/DCS
Channel Name
MENU
] key to enter the menu
or
pressing [
maximal value of the frequency range.
1.Press [
MENU
2.Press [
CTCSS/DCS is available only in analogue channel, it contains:
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose Program Radio, then press [
MENU
] key to confirm.
MENU
] key to confirm.
CTCSS/DCS encoding
CTCSS/DCS decoding
4.Input the correct password which has been programmed already by software.then
Encode
press [
1.Press [ MENU ] key to enter the menu
2.Press [
or
] key and choose utilities,then press [ MENU ] key to confirm.
3.Press [
or
] key and choose Program Radio, then press[ MENU ]key to confirm.
4.Input the correct password which has been programmed already by software.then
press [ MENU ] key to confirm.
5.Press [
or
] key and choose QT/DQT Code, then press [ MENU ] key to confirm.
MENU
5.Press [
] key to confirm.
or
] key and choose Channel Name, then press [
MENU
] key to confirm.
6.The screen displays the current channel name, then press [ #1 ] key to change the
letter, number, Chinese input method, the same as text editing.
7.The screen displays âChannel name savedâ after pressing [
45
MENU
] key.
46
6.Thereâs empty option and all kinds encoding value,press [
Empty, press [
or
or
] key and choose
] key confirm. Then the CTCSS/DCS has been shut down. press
MENU
] key and choose the codes, press [ MENU ] key to confirm. The interface displays
âQT/DQT encode savedâ.
MENU
5.Press [
] key to confirm.
or
] key and choose Color Code, then press [
MENU
MENU
] key to confirm.
] key to confirm.
Repeater Slot
] key to enter the menu
MENU
press [
6.Input the number and press [
Decode
1.Press [
4.Input the correct password which has been programmed already by software.then
2.Press[
or
] key and choose utilities,then press [
3.Press[
or
] key and choose Program Radio, then press [
MENU
] key to confirm.
Repeater Slot is available only in digital channels.
] key to confirm.
1.Press [
4.Input the correct password which has been programmed already by software.then
2.Press [
or
] key and choose utilities,then press key to confirm.
press [
3.Press [
or
] key and choose Program Radio, then press [
MENU
5.Press [
] key to confirm.
or
] key and choose QT/DQT Code, then press [
6.Thereâs empty option and all kinds decoding value,press[
Empty, press [
or
MENU
MENU
or
MENU
] key to confirm.
] key and choose
] key confirm. Then the CTCSS/DCS has been shut down. press
] key and choose the codes, press [
MENU
] key to confirm. The interface
MENU
] key to enter the menu
MENU
] key to confirm.
4.Input the correct password which has been programmed already by software. then
press [
MENU
] key to confirm.
5.Press [
or
] key and choose Repeater Slot, then press [
6.Press [
or
] key and choose repeater slot, then press [
MENU
MENU
] key to confirm.
] key to confirm.The
interface displays âRepeater slot savedâ.
displays âQT/DQT decode savedâ.
Color Code
Color Code is available only in digital mode.
1.Press [
MENU
] key to enter the menu
2.Press [
or
] key and choose utilities,then press [
3.Press [
or
] key and choose Program Radio, then press [
47
MENU
] key to confirm.
MENU
] key to confirm.
48
Technical Parameter
General
Analogue Sensibility
0.22uV/-120dBm(20dB SINDA)
UHF:400-470MHz
Digital Sensibility
0.282uV/-118dBm(BER 5%)
Channel Storage
1000 channels
Co-channel Rejection
ÂÂ {
Adjacent Channel Selectivity
TIA603C:65Db ETSI:60dB
Channel Spacing
12.5KHz
Spurious Response
TIA603C:75Db ETSI:70dB
Frequency Range
49
Receiving
Working Voltage
7.4V DC
Audio Power
1W
Battery Type
Polymer lithium battery
Audio Distortion
ÂÂÂďźTypeďź
Working Temperature
-30â~+60â
Audio Response
1dB~-3dB
Store Temperature
-40â~+85â
Weight
300g
Antenna Impedance
ÂÂÂ
Dimension
130*58*35mm
50
Guarantee
Model Number:
Transmitting
High:5W Low:1W
Serial Number:
Frequency Stability
Âą1ppm
Purchase Date:
Adjacent channel power
ÂÂÂÂ{
Dealer:
Telephone:
Idle Time Slot Power
\}ÂÂÂÂ{!
User`s Name:
Telephone:
FM Modulation Mode
12.5KHz@11K0F3E
Address:
Post Code:
Modulation maximum deviation 2.5KHz@12.5KHz
Nonactive slot power
-57dBm
Digital protocol
ETSI TS 102 361-1-2-3
Vocoder type
AMBE+2TM
Modulation BER(Bit Error Rate) ÂÂÂ
4FSK digital mode
7K60F1D, 7K60F1E
Please cut along with this line
Output power
Remarks:
1.This guarantee card to be kept by user,we will not re offer if lost.
2.This guarantee card should be filled by dealer,otherwise it`s invalid.
3.Do not alter the guarantee card,please confirm that the serial number on the
guarantee card is the same with radio.
4.One-year guarantee for radio,half a year guarantee for accessory.
5.Users can get maintenance service from following ways:
 #  ÂÂ
  !
 Â  !#Â
51
52
FCC Statement
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
generate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
⢠Reorient or relocate the receiving antenna.
⢠Increase the separation between the equipment and receiver.
⢠Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
⢠Consult the dealer for technic
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved
by the party responsible/Iradio Electronics Co., Ltd. The user could lose the authority to operate
this equipment if an unauthorizedchange or modification is made.
This Iradio transceiver has been tested and complies with the standards listed below, in regards
to Radio Frequency (RF) energy and electromagnetic energy (EME) generated by the transceiver.
⢠FCC 47 CFR 1.1307, 1.1310 & 1.1093 RF exposure limits for Occupational Use Only. RF
Exposure limits adopted by the FCC are generally based on recommendations from the National
Council on Radiation Protection and Measurements & the American National Standards Institute.
⢠American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers
(IEEE) C95.1: 2005
The following list provides you with the information required to ensure that you are aware of RF
exposure and of how to operate this transceiver so that the FCC RF exposure limitations are not
exceeded.
⢠While transmitting (holding the PTT switch or speaking with VOX enabled), always keep the
antenna and the radio at least 2.5cm (1 inch) from your body or face, as well as from any bystanders.
⢠Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of
the total use time may exceed the limits in accordance to the FCC RF exposure requirements.
Nominal transceiver operation is 5% transmission time, 5% reception time, and 90% stand-by time.
⢠Use only the specified antenna for this transceiver; this may be either the antenna provided with
the transceiver or another antenna authorized by Iradio. Use only Iradio authorized accessories
(antennas, battery packs, belt clips, Speaker/Mics or headsets etc.): When worn on the body,
always place the radio in a Iradio recommended clip or carrying case meant for this product.
The use of other than recommended or approved body-worn accessories may result in RF exposure
levels which exceed the FCCâs occupational/controlled environment RF exposure limits.
ď
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : xm07071 Create Date : 2017:08:01 16:33:47+08:00 Modify Date : 2017:09:01 11:03:09-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : DM580&560英文说明书-更改 Creator : xm07071 Metadata Date : 2017:09:01 11:03:09-07:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 120 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15759 bytes, use -b option to extract) Instance ID : uuid:12a88450-2a84-4c7e-acff-60f7a2f0f54a Document ID : xmp.did:FDCD71797958E7118BFFB0780FA6DBCD Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:27c09090-3895-4e5c-a07b-9d900392969d Derived From Document ID : xmp.did:0F483C707842E711BEFD85489D7F4518 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:6B8B18161D23E7118E79FAAE3936421F, xmp.iid:FDCD71797958E7118BFFB0780FA6DBCD History When : 2017:04:17 15:34:18+08:00, 2017:06:24 18:13:17+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : F:\2017\艾迪欧\DM580&560英文说明书\对讲机-2.psd, F:\2017\艾迪欧\DM580&560英文说明书\对讲机-1.psd, pe0075561.jpg, 412-01905.jpg, bld063791.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 286.000114 Max Page Size H : 132.000212 Max Page Size Unit : Millimeters Font Name : BankGothicBT-Medium, AvantGardeITCbyBT-Demi, ArialMT, Arial-BoldMT, Helvetica, Impact, MyriadPro-Semibold, FZDHTJW--GB1-0, FZHTJW--GB1-0, AdobeSongStd-Light Font Family : BankGothic Md BT, AvantGarde Bk BT, Arial, Arial, Helvetica, Impact, Myriad Pro, 方正大黑简体, 方正黑体简体, Adobe 宋体 Std Font Face : Medium, Demi, Regular, Bold, Regular, Regular, Semibold, Regular, Regular, L Font Type : TrueType, TrueType, Open Type, Open Type, TrueType, Open Type, Open Type, TrueType, TrueType, Open Type Font Version : mfgpctt-v4.4 Dec 10 1998, mfgpctt-v4.4 Dec 14 1998, Version 5.06, Version 5.06, Version 1.3 (Hewlett-Packard), Version 5.00, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, 2.00, 2.00, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : BankGothic Md BT Medium.ttf, Avgardd.ttf, arial.ttf, arialbd.ttf, helr45w.TTF, impact.ttf, MyriadPro-Semibold.otf, FZ12.TTF, 方正黑体简体.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: C=0 M=35 Y=100 K=0 Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 34.999999 Swatch Groups Colorants Yellow : 100.000000 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 33EXIF Metadata provided by EXIF.tools