Itron IMR AMR transceiver device for communicating with utility meters User Manual User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3230359
Application ID	ClHVWWyZwEiedGxO/x6trw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.94kB (249244 bits)
Date Submitted	2016-12-15 00:00:00
Date Available	2016-12-16 00:00:00
Creation Date	2016-12-14 18:01:36
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-12-14 15:42:54
Document Title	User Guide
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	For Your Safety, Read This Document

Itron Mobile Radio
User Guide
Itron Mobile Radio
User Guide
Identification
Itron Mobile Radio User Guide
14 December 2016 TDC-1719-000
Itron Mobile Radio
Copyright
© 2016 Itron, Inc. All rights reserved.
Confidentiality Notice
The information contained herein is proprietary and confidential and is being provided subject to the condition
that (i) it be held in confidence except to the extent required otherwise by law and (ii) it will be used only for the
purposes described herein. Any third party that is given access to this information shall be similarly bound in
writing.
Trademark Notice
Itron is a registered trademark of Itron, Inc.
All other product names and logos in this documentation are used for identification purposes only and may be
trademarks or registered trademarks of their respective companies.
Suggestions
For more information about Itron or Itron products, see www.itron.com.
If you have questions or comments about the software or hardware product, contact Itron Technical Support
Services.
Contact
• Email: support@itron.com
• Internet: support.itron.com
• Telephone Itron Technical Support North America: 1-877-487-6602
For technical support contact information by region, go to www.itron.com and select your country and language.
Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Class B Part 15 Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio or TV technician for help.
Compliance Statement Canada
Déclaration de Conformité
Under Innovation, Science and Economic
Development Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Innovation, Science and Economic
Development Canada. To reduce potential radio
interference to other users, the antenna type and its
gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain
de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication
satisfaisante.
This device complies with Innovation, Science and
Economic Development Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Caution ELECTROMAGNETIC COMPATIBILITY
Use only approved accessories with this equipment. In general all cables must be high
quality, shielded, and correctly terminated. Unapproved modifications or operation beyond
or in conflict with these instructions for use, may void authorization by the authorities to
operate the equipment.
Important Changes or modifications to the device or its antenna not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the device.
Transportation Classification
The Federal Aviation Administration prohibits operating transmitters and receivers on all commercial aircraft.
When powered, Itron Mobile Radios are considered operating transmitters and receivers and cannot be shipped
by air with the battery installed. To ship by air, remove the battery and follow li-ion shipping regulations.
Specific Absorption Rate Data
The FCC ID: EO9IMR and IC: 864A-IMR model of Itron Mobile Radio meets the government’s requirements
for exposure to radio waves.
Your Itron Mobile Radio has a radio transmitter and receiver. It is designed and manufactured not to exceed
limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the
U.S. government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The guidelines are based on standards
that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age or health.
The exposure standard for wireless mobile and/or portable devices employs a unit of measurement known as the
specific absorption rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6
W/kg1. Tests for SAR are conducted using standard operating positions accepted by the FCC and by Innovation,
Science and Economic Development Canada with the radio transmitting at its highest certified power level in all
test frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level
of the radio while operating can be well below the maximum level. This is because the Radio is designed to
operate at multiple power levels, depending on the needs of the customer.
Before an Itron Mobile Radio is available for sale to the public in the U.S. and Canada, it must be tested and
certified to the FCC and Innovation, Science and Economic Development Canada that it does not exceed the
limit established by each government for safe exposure. The tests are performed in positions and locations (for
example, worn on the body) and reported to the FCC and made available for review by Innovation, Science and
Economic Development Canada. The highest SAR value for this Itron Mobile Radio, model IMR when tested
for use when worn on the body as described in the user’s guide is 0.24 W/kg. While there may be differences
between the SAR levels of various Itron Mobile Radio models and at various positions, they all meet the
government requirements for safe exposure. Please note that improvements to this product model could cause
differences in the SAR value for later products; and in all cases, products are designed to be within the
guidelines.
---------------------1
In the United States and Canada, the SAR limit for wireless mobile and/or portable devices used by the public is
1.6 W per kilogram averaged over 1 g of tissue. The standard incorporates a substantial margin of safety to get
additional protection for the public and to account for any variations in measurements.
Warning Use this device only in a manner consistent with the Itron Mobile
Radio User Guide.
Table of Contents
Introduction ............................................................................................ 1
Daily Operation ....................................................................................... 8
Battery Basics ...................................................................................... 18
Safety ..................................................................................................... 21
Troubleshooting ................................................................................... 25
Itron Mobile Radio Capabilities and Limitations .............................. 29
ii
Introduction
This document details the features and functions of the Itron Mobile Radio and provides
information relating to its use and maintenance.
The Itron Mobile Radio is equipped with the following features.
•
Radio button. For information about the radio button, see Button Functions on page 9.
•
LED status indicators. For information about the LED indicators, see LED Status
Indicators on page 9.
•
USB communication port. For information about the USB communication port, see USB
Communication Port on page 13.
Related Documents
•
•
•
Itron Mobile User Guide The Itron Mobile Radio is designed for use with handheld and
laptop computers running Itron Mobile software application.
Itron Mobile Radio Quick Reference Guide
Itron Mobile Radio Compliance Statement
Documentation Conventions
This guide uses the following documentation conventions:
Convention
Example
Hypertext links appear in blue text.
See Copyright for identification information.
Warning This type of note is used to warn of potential physical harm to the
user or hardware. It is critical that you pay strict attention to Warning notes, read
the information carefully, and heed the advice and/or instructions.
Caution This type of note advises users that failure to take or avoid a specified
action could result in a loss of data.
Note Indicates neutral or positive information that stresses or supplements important
points of the main text. A note supplies information that may apply only in special
cases.
Unpacking Your Itron Mobile Radio
The Itron Mobile Radio comes with the following items.
Item
• Itron Mobile Radio with
built-in antenna
Description
•
AC power adapter
AC wall plug with USB type A port.
•
Communication cable
USB cable.
•
Battery kit
Battery, battery compartment cover, screws, gasket
•
Documentation
Itron Mobile Radio Quick Reference Guide
Itron Mobile Radio Compliance Statement
An optional Radio Carrying Kit is available for order separately. The Radio Carrying Kit contains
a belt clip and a shoulder harness.
When you unpack your radio, make sure you have all of the components listed here. If any are
missing, contact Itron Support Services immediately.
After you install the battery, charge the radio to 100 percent capacity before using it. Complete
charging takes about six hours.
For more information about the battery, see Battery Basics.
To install and charge the battery
1.
Plug the connector into the socket in the battery compartment.
You will have to bend the wires at the connector at a 90 degree angle.
2.
Insert the battery into the compartment.
•
Make sure the battery label is facing the ridges on the radio case.
•
Make sure the wires are along the same side as the connector.
•
Make sure the removal tab is facing out.
Caution Do not pinch the battery wires when replacing the battery compartment cover.
3.
4.
5.
6.
7.
Replace the battery compartment cover making sure the gasket is properly aligned for water
tightness.
Fasten the battery compartment cover in place with the provided screws.
Tighten the screws to ensure water tightness.
Plug the USB cable into the Itron Mobile Radio.
Plug the USB cable into a PC, an AC wall adapter, or a 12V AC car adapter.
Allow the Itron Mobile Radio to charge for at least six hours.
Daily Operation
•
•
•
•
Inspect the radio for broken, loose, or missing parts and fasteners, taking corrective action as
required.
Make sure the radio is operated and stored within the recommended temperature range.
Operating temperature: -4° F to 140° F (-20° C to 60° C)
Storage temperature: -40° F to 158° F (-40° C to 70° C)
•
Cold temperature extremes may result in reduced available energy from the battery
pack. This energy is recoverable as the battery pack warms to 68° F (20° C).
•
Do not subject the radio to extreme temperatures, such as leaving it in a vehicle in
bright sunlight. Extended exposure to warm temperature extremes can result in
permanent reduction in available energy from the battery pack.
Exit all external applications at the end of each work day. This ensures that all applications
communicating with the radio have terminated their Bluetooth links.
Charge the battery nightly.
Turning the Radio On or Off
To turn the radio on (battery power)
•
Press and hold the button for three seconds (until the Power LED turns green) to turn the
radio on.
To turn the radio off (battery power)
•
Press and hold the button for three seconds (until the Power LED turns white) to to turn the
radio off.
To turn the radio on (AC adapter)
•
The radio is always on when using the AC adapter.
When the radio is using external power (connected to an energy source with the USB cable)
pressing the button turns the power LED green until the button is released, but it does not
turn the radio off.
LED Status Indicators
Two multi-color LED status indicators are located on the top of the radio. These indicators are
labeled with a power icon
and a communication icon
. The color and illumination of the
LED lights provide feedback about the Itron Mobile Radio's status.
The LED lights have two patterns for displaying different states.
•
Solid. Continuous without interruption or alteration
•
Flash. Alternating periods of colored illumination followed by periods of non-illumination
of the indicator. The color remains consistent during all illumination periods.
10
The following tables describes the LED colors and patterns for the most common radio conditions.
Power indicator
Solid
•
•
•
•
•
Error: Battery
Turning on
Initializing
Button pressed
Charged
Flash
Error: General
Battery more than 50%
N/A
Battery more than 20%
Charging
Battery less than 20%
11
Comm indicator
Solid
Flash
USB connected
Error
Bluetooth® connected
Bluetooth low energy connected
Note The application connected to the radio may assign a display pattern to the LEDs that is
not described in these tables.
12
USB Communication Port
The Itron Mobile Radio has one USB communication port under a protective rubber flap on the
side of the radio near the top.
In addition, the radio is equipped with an internal port for wireless Bluetooth® communications. If
communication is in place through Bluetooth, attaching the USB cable only provides power.
Communication may occur through Bluetooth while charging with the USB.
Note When you connect the Itron Mobile Radio to a PC using Windows 7 or Windows
8, you may see a prompt to install an updated Texas Instruments driver for the device.
Install the necessary driver.
13
Carrying the Itron Mobile Radio
The Itron Mobile Radio’s shoulder harness and belt clip provide convenient, hands-free ways to
carry the radio while installing, reading, and maintaining meters and endpoints. The shoulder
harness and belt clip let you wear the radio comfortably while walking or driving.
As a safety feature, the clips are designed to break away if the radio snags or becomes caught,
releasing the wearer and reducing the likelihood of injury.
The radio may also be carried in a pocket, backpack, or bag.
The radio is water resistant.
Note If you are carrying the radio, make sure the side with the ridges is facing away
from your body, conductive materials, or anything else which may shield the radio
signal.
14
Maintaining Your Itron Mobile Radio
Your Itron Mobile Radio is rugged and water-resistant. However, you should take the following
precautions to ensure that it gives you many years of reliable service.
•
Do not subject the radio to extreme temperatures, such as leaving it in a vehicle in bright
sunlight. For more information, see Battery Best Practices.
•
Do not leave it in damp or dusty places.
•
Do not drop your radio or subject it to severe impacts.
•
Do not use products containing DEET near the Itron Mobile Radio. DEET will degrade the
radio's casing.
•
When installing or replacing the battery, make sure to follow the provided instructions to
maintain water tightness.
•
Use the rubber flap to protect the radio’s USB port in dusty conditions.
15
To clean the Itron Mobile Radio case
1.
2.
3.
Wipe the radio’s case with a damp cloth.
Use a soft-bristle brush to remove stubborn deposits.
Blow any water out of the connector and then leave the radio to drain and air-dry.
Warning Never use solvents of any kind on the case. Do not expose it to
temperatures above 140° F (60° C).
16
Storing Your Itron Mobile Radio
Your Itron Mobile Radio can be safely stored for two weeks or less with simple preparation.
Follow the steps below to prepare your radio for short-term storage.
To store your Itron Mobile Radio
•
Connect the Itron Mobile Radio to external power and allow the battery pack to fully charge.
For information about charging status, see LED Status Indicators on page 9.
If you are storing the Itron Mobile Radio for an extended period of time, you should let it
remain charging or remove its battery.
Note Remove the Itron Mobile Radio’s battery before storing the device for periods
longer than two weeks.
17
Battery Basics
The Itron Mobile Radio uses a rechargeable lithium-ion (Li-Ion) battery pack as its main power
source whenever it is not receiving power through its USB cable.
Caution Do not use any power source other than the Itron-recommended
battery. Using another power source could damage the radio.
Warning Risk of Explosion! There is a risk of explosion if the battery is
replaced by an incorrect battery type. Dispose of used batteries in
accordance with local regulatory guidelines.
Attention Il y a danger d’explosion s’il y a remplacement incorrect de la
batterie. Remplacer uniquement avec une batterie du même type ou d’un
type equivalent recommandé par le constructeur. Mettre au rebut les
batteries usagées conformément aux instructions du fabricant.
Charge the radio's battery to 100 percent capacity before using it. Complete charging takes about
six hours. Charge the battery pack through the USB cable, which can draw power from a
computer, an AC wall outlet, or a 12V DC car adapter.
18
Battery Best Practices
Itron recommends the following practices to ensure long battery life.
•
Charge the radio at the end of each work day.
•
Check the charge status at the beginning of each work day.
•
Charge the radio at room temperature (68° F/20° C).
•
Charging is disabled below 32° F (0° C) and above 104° F (40° C) to protect the lithium-ion
batteries.
•
In cold weather, keep the radio inside your outer clothing. A cold battery will not last
all day even with full charge. Metalized fabrics should not be worn over the radio as
they may severely reduce reading success.
•
In hot weather, keep the radio out of direct sunlight. A hot battery's capacity is
degraded over time and eventually the battery will not last all day even with a full
charge.
19
•
•
Shallow or partial discharge and charge cycles are preferred, rather than allowing the battery
pack to drain completely before recharging it.
Charging after a shallow or partial discharge does not degrade battery pack life or
performance.
20
Safety
Your Itron Mobile Radio is ergonomically designed for safe, comfortable use. However, as with
all equipment, you should follow good working practices while using it.
Minimize risk by following these guidelines.
•
Maintain good posture while using the radio. Keep your fingers and body relaxed whenever
possible.
•
Avoid keeping your muscles tense for long periods. Change tasks often to avoid prolonged
muscle strain. Support the radio while using it.
•
Take frequent short breaks. Use these breaks to exercise the muscles in your hands, arms,
shoulders, neck, and back.
21
AC Power Adapter
Follow these instructions to help ensure your safety and extend the life of the adapter.
•
Use the adapter indoors only.
•
Avoid spilling liquid on the adapter.
Do not connect it if it is damp.
•
Make sure ventilation around the adapter is not restricted while it is in use.
•
Use only the AC adapter supplied with your Itron Mobile Radio.
Do not substitute an alternative or unapproved adapter; this may damage the Itron Mobile
Radio and void the warranty.
•
Inspect the AC adapter before use.
Do not use it if there are any signs of damage or deterioration.
22
•
•
•
•
•
Make sure the connector is firmly connected.
Avoid mechanical strain to cables and connectors.
In the event of overloading, the AC adapter is designed to be fail-safe and may stop
functioning.
Do not try to use the AC adapter to power any other equipment.
Avoid use in dusty, damp, or contaminated environments.
Usage in Hazardous Locations
This device is suitable for use in Class 1, Division 2, Groups A, B, C, D locations. It should only
be used with computer systems approved for use in hazardous locations.
Warning—Explosion Hazard Do not replace the battery unless power has been
switched off or the area is known to be non-hazardous.
Avertissement—Risque d’Explosion Couper le courant ou s’assurer que
l’emplacement est designe non dangereux avant de replacer le composants.
23
Warning—Explosion Hazard Do not disconnect equipment unless power has
been switched off or the area is known to be non-hazardous.
Avertissement—Risque d’Explosion Avant de deconnecter l’equipement, couper
le courant ou s’assurer qu l’emplacement is designe non dangereux.
Warning—Explosion Hazard Substitution of components may impair suitability
for Class 1, Division 2 locations.
Avertissement—Risque d’Explosion La substitution de composants peut rendre
ce materiel inacceptable pour les emplacements de classe 1, division 2.
24
Troubleshooting
If you have a problem with your Itron Mobile Radio, review the appropriate troubleshooting steps
listed below. If the problem remains unresolved, contact an Itron customer service representative
(e-mail: support@itron.com; phone: 1.877.487.6602).
Problem
Possible Solutions
• If charging from a PC through the USB cable, try a different
Battery does not charge
USB port on the PC. The port may be bad or incapable of
providing sufficient current for charging.
• Try a different AC outlet.
• Make sure the USB port is clean and free of dirt or other
contaminants.
• If the previous troubleshooting suggestions do not solve the
issue, replace the battery.
25
Problem
Battery power drains
quickly
USB connection
problems
Bluetooth connection
problems
Radio will not turn off
Radio will not turn on
Possible Solutions
• Make sure the battery indicates a full charge following an
overnight charge (see LED Status Indicators on page 9).
• If the previous troubleshooting suggestions do not solve the
issue, replace the battery.
• Install Texas Instruments drivers.
• Inspect the USB port for damage, dirt, or other contaminants.
•
See your application’s user guide for setup information.
Disconnect the radio from external power sources and press the button
firmly for six seconds. This will force the radio to reset its firmware.
26
Optimizing Bluetooth® Performance
Bluetooth communication works best when the communicating devices have an unobstructed view
from one device to the other. When possible, remove or reduce obstacles between the Itron Mobile
Radio and the mobile device during Bluetooth communication.
Tips for Radio Readings
The Itron Mobile Radio is used to receive the radio signals from ERT-equipped meters. To
maximize the radio capabilities, consider the following factors when collecting data.
•
Absorption. Conductive material such as steel, metallic pipe and siding, and tree leaves and
branches absorb more of a radio signal than concrete, bricks, sheetrock, plastic, and wood.
Due to absorption, you may have shorter readability distances in industrial or business areas
than in residential areas.
27
•
•
Shielding. When conductive materials are close together, as in metal partitions or narrowmesh fencing, they act as a shield and absorb the entire radio signal. Move a short distance
away from conductive material so the ERT signal is not shielded. Keep moving to assist in
receiving signals that may be shielded. Metalized fabrics should not be worn over the radio as
they may severely reduce reading success.
Reflection. Radio signals can be reflected by some of the same types of conductive material
that absorb them. Move a short distance away from the reflective material to find the direct
ERT signal or a strong reflected signal. Keep moving to assist in receiving signals that may
be reflected.
28
Itron Mobile Radio Capabilities and Limitations
Equipment Description
Itron Mobile Radio
Model: IMR
FCC ID: EO9IMR
IC: 864A-IMR
Itron Mobile Radio
Transmitter Information
Transmit frequency MAS, FCC: 952 MHz–960 MHz
Transmit frequency MAS, ISED: 952 MHz–953 MHz
Transmit frequency ISM: 908 MHz–923.8 MHz
Antenna type: Directional antenna with maximum gain perpendicular to the front face of the IMR
unit.
Receiver Information
Frequency ISM: 908–923.8 MHz
29
Bluetooth
Manufacturer: Panasonic
Model: PAN1326B
FCC ID: T7V1316
IC: 216Q-1316
Transmitter class: Class 1
Transmit/receive frequency: 2402 MHz–2480 MHz
Maximum transmitter power: 10.5 dBm
Antenna type: integral, chip
30

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : For Your Safety, Read This Document
Create Date                     : 2016:12:14 18:01:36-05:00
Modify Date                     : 2016:12:14 15:42:54-08:00
Subject                         : Itron Mobile Radio
Has XFA                         : No
Language                        : EN-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:12:14 15:42:54-08:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:7f304ff7-b7b9-40df-bdf8-fa68da6ed782
Instance ID                     : uuid:4443892b-77ab-4b3a-bf2c-e076d6ac676d
Format                          : application/pdf
Title                           : User Guide
Description                     : Itron Mobile Radio
Creator                         : For Your Safety, Read This Document
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20161214230116
Company                         : AuthorIT Software Corporation Ltd.
Comments                        : Proprietary and Confidential
Headline                        : Itron Mobile Radio
Page Layout                     : OneColumn
Page Count                      : 40

EXIF Metadata provided by EXIF.tools