Iwatsu America BTINF IX-58BTINF Bluetooth Interface User Manual Ch10 StationECS

Iwatsu America Inc IX-58BTINF Bluetooth Interface Ch10 StationECS

Exhibit 8d

Chapter 10 Station Installation159IX-5800 / IX-5810 Optional Equipment InstallationIX-58BTINF Bluetooth Headset Adapter Installation (The IX-5800 does not support the IX-58BTINF)This unit allows the connection of an IX-5810 Digital Telephone to a Bluetooth headset.To add an IX-58BTINF unit to an IX-5810 Digital Telephone:1. Turn the IX-5810 Telephone so that the bottom (pedestal) of the telephone is fac-ing up and disconnect all cords (Headset and Handset).2. Using a Phillips head screwdriver, remove the six screws from the bottom of the IX-5810 Telephone. Carefully, place the screws aside.3. With the six screws removed, separate the upper and lower housing from the tele-phone.Note: Attention and / or care should be taken to keep the key telephone with the Bluetooth Module installed at least eight inches from any human contact.CN-BT Connector
Iwatsu Enterprise-CS Installation Guide1604. Insert the IX-58BTINF CN901 connector into the CN-BT connector on the IX-5810 motherboard (IX-5810KTCU).5. When the IX-58BTINF board is connected, insert the three retaining screws (pro-vided with the IX-58BTINF) to secure the IX-58BTINF to the IX-5810KTCU motherboard.6. Reattach the top and bottom sections of the telephone using the Phillips head screws set aside from the second step.7. Reconnect all cords.IX-58BTINFRetaining Screws

Navigation menu