Iwatsu America BTINF IX-58BTINF Bluetooth Interface User Manual Ch10 StationECS
Iwatsu America Inc IX-58BTINF Bluetooth Interface Ch10 StationECS
Contents
- 1. Exhibit 8a
- 2. Exhibit 8b
- 3. Exhibit 8c
- 4. Exhibit 8d
Exhibit 8d
![](/img.php?id=948008&img=bg1.png)
Chapter 10 Station Installation
159
IX-5800 / IX-5810 Optional Equipment
Installation
IX-58BTINF Bluetooth Headset Adapter Installation (The
IX-5800 does not support the IX-58BTINF)
This unit allows the connection of an IX-5810 Digital Telephone to a Bluetooth
headset.
To add an IX-58BTINF unit to an IX-5810 Digital Telephone:
1. Turn the IX-5810 Telephone so that the bottom (pedestal) of the telephone is fac-
ing up and disconnect all cords (Headset and Handset).
2. Using a Phillips head screwdriver, remove the six screws from the bottom of the
IX-5810 Telephone. Carefully, place the screws aside.
3. With the six screws removed, separate the upper and lower housing from the tele-
phone.
Note: Attention and / or care should be taken to keep the key telephone with the
Bluetooth Module installed at least eight inches from any human contact.
CN-BT Connector
![](/img.php?id=948008&img=bg2.png)
Iwatsu Enterprise-CS Installation Guide
160
4. Insert the IX-58BTINF CN901 connector into the CN-BT connector on the IX-
5810 motherboard (IX-5810KTCU).
5. When the IX-58BTINF board is connected, insert the three retaining screws (pro-
vided with the IX-58BTINF) to secure the IX-58BTINF to the IX-5810KTCU
motherboard.
6. Reattach the top and bottom sections of the telephone using the Phillips head
screws set aside from the second step.
7. Reconnect all cords.
IX-58BTINF
Retaining Screws