J Communications Co FR1500XTM Family Radio Transceiver User Manual

J Communications Co Ltd Family Radio Transceiver Users Manual

Users Manual

FR1500XTMOperating ManualJ Communications Co.,Ltd.KEY Definition(1) POWER KEY1) Short key- Press the Power button shortly to turn the unit on.2) Long key (In case of pressing and holding more than1.2sec)- After saving all information to EEPRO, the unit isturned off.(2) MODE KEYJ COMMUNICATIONS CO., LTD.FCC ID : OAJFR1500XTMJOB # : 298AK1EXHIBIT # : 6
1) Short key – increasing a Mode up.2) Long key - turning to the TWO-WAY mode, first mode.(3) MENU KEY1) Short key – increasing a Menu up.2) Long key - making the Key locked and disabled.(4) Shift/Key lock1) Short key – shifting Cursor.2) Long key - releasing Key lock function.(5) UP1) Short key – increasing Volume or current item.2) Long key - increasing Volume or current item at a more rapid rate.(6) DOWN1) Short key – decreasing Volume or current item.2) Long key - decreasing Volume or current item at a more rapid rate.(7) MONITOR- This key is used to check the active channel beforetransmitting. If you press and hold the monitor key formore than 3 seconds, the unit monitors the receivingsignal continuously. To stop auto monitoring, press themonitor key shortly.(8) PTT- Pressing and holding this button will allow you tospeak to any transceiver that is set to the samechannel and privacy code setting as yours.- Pressing the button twice quickly will allow you totransmit a calling to another party on the samechannel.LCD icon display : VOX icon – appears when VOX mode is activated. : SCAN icon –appears when Scan mode is activated. : WEATEHR ALERT icon –appears when Weather alert is selected : ALARM icon - appears when Alarm mode is On
: VIBRATOR CALL icon –appears VIB in the callmode is selected. : BUSY icon – appears carrier detect in the two waychannel : KEY LOCK icon –appears when key lock mode isactivated. : CHANNEL icon –appears when Two way channel isdisplayed : CTCSS Code icon –appears when code of Two way channel is displated. :BATTERY strengtt icon –indicates the battery chargestrength.! POWER ON AND OFF OPERATION0.POWER ON OPERATIONIf you press the Power key, user’s name is shown onLCD for a second with an initial beeping.1. POWER OFF OPERATIONTo turn it off, press and hold the Power key formore than 1.2 seconds. The unit will save the setdata before it shuts off.2. AFTER POWER ON INITIAL DISPLAYIndicates channel, code, Battery balance! DETAILED MENU BY MODE1. TWO WAY MODE After 1 second
TWO WAY mode. TWO WAY standby display1) Pressing the mode key in the set up mode allows you to enter thetwo-way mode. Current channel and code are shown on LCD2) Detailed function in the two-way mode.(1) Channel/Code selection menu- Pressing the menu key in the standby display of Two waymode allows you to enter the channel selection menuwith beeping and the current channel is blinking. Youcan select the channel by using up and down key.- Pressing the shift key allows you to enter the codeselection menu with key beeping and the current code isblinking. You can select the code by using up and downkey.- Pressing the shift key allows you to return to thechannel selection menu.(2) Scan selection menu- Pressing the menu key in the channel/code selectionmenu allows you to enter the scan selection menu withkey beeping. If there is no key entering for 10 secondsin the scan selection menu, returns to the TWO WAYstandby display.- You can select scan mode in the off, Normal scan andpriority scan by using up / down key while Scan isblinking.- If you select the Normal scan, it starts to scan thechannel from the current channel.- If you select the priority scan, it scans the currentchannel and priority channel in turn.(3) VOX selection menu- Pressing the menu key in the scan selection menu allowsyou to enter VOX selection menu with key beeping.- You can select one out of off/Hi/Mid/Low by using up ordown key.(4) Scrambler selection menu- Pressing the menu key in the VOX selection menu allowsyou to enter scrambler selection menu with key beeping.- You can select one out of off/1/2/3/4 by using up ordown key.2. FM RADIO MODE FM RADIO MODE FM standby display After 1 secondMenu keyMenu key
1) Pressing the mode key in the two-way mode allows you to enterFM radio mode and enter FM standby mode showing current FMoperating status after 1 second.2) Detailed function by menu.(1) FM Seek- Pressing the menu key in the FM Standby display allowsyou to enter FM seek menu and you can scan the FM radiofrequency by using up/down key. If an active broadcastsignal is detected, it receives a signal in thatchannel.(2) FM Tune- Pressing the menu key in the FM seek menu allows you toenter FM tuning menu. You can increase and decrease FMbroadcast frequency by 0.1KHz using up/down key.(3) FM Preset menu- Pressing the menu key in the FM Tune menu allows you toenter FM preset menu. You can preset the broadcastchannel up • 9 channels by using the shift key. You canchange a broadcast frequency by using up/down key.(4) FM selection menu- Pressing the menu key in the FM Preset allows you toenter FM selection menu. You can select one out of FMoff/FM only/FM +2WAY3. WEATHER MODE WEATHER Mode Weather standby display1) Pressing the mode key in the FM MODE allows you to enter weatherradio mode shows weather channel operation status after 1second.2) Detailed function by menu.(1) Weather Channel selection menu- Pressing the menu key in the Weather Standby allows youto enter weather channel selection menu. You can selectthe weather channel out of WEA 1/~/WEA 10. (Default=1)(2) Weather Alert selection menu- Pressing the menu key in the Weather Channel Selectionmenu allows you to enter the Weather alert selectionmenu. You can select ALERT ON/OFF by using up/down key.(Default=OFF)- If the WEA Alert On, this radio always detects theweather alert signal (=1050Hz) of weather channel.4. COMPASS MODE COMPASS Mode Compass standby display After 1 second After 1 secondMenu keyMenu key
1) Pressing the mode key in the WEATHER MODE allows you to enterCOMPASS radio mode and it shows you the current direction on thebasis of which radio antenna is heading for.2) There are 8 directions such as N/NE/E/SE/S/SW/W/NW in thecompass direction.3) Detailed function by menu.(1)Calibration menu- Pressing the menu key in the Compass Standby allows youto enter Compass Calibration menu. If you select CALIBON by using up or down key, the Calibration is started.(2)Compass Declination selection menu- Pressing the menu key in the Compass Calibration menuallows you to enter Compass Declination selection menu.You can one out of DECL 90E~90W by using up/down key.5. TEMPERATURE MODE TEMPERATURE Mode Temperature standby display1) Pressing the mode key in the COMPASS MODE allows you to enterthe temperature mode, and it shows you the current temperatureon the LCD after I second.2) Detailed function.(1) Unit selection menu- Pressing the menu key in the Temperature standby allowsyou to enter the Unit selection menu, you can selectFahrenheit or Celsius by using up/down key.(2)Alarm Set menu- Pressing the menu key in the Unit selection menu entersthe Alarm Set menu and you can select alarm function byusing up/down key.(2) Alarm High limit Set menu- Pressing the menu key in the Alarm Set menu allows youto enter Alarm High limit set menu and you can set theHigh limit temperature by using up/down key.(3) Alarm Low limit Set menu- Pressing the menu key in the Alarm High limit Set menuallows you to enter the Alarm Low limit set menu andyou can set the High limit temperature by using up/downkey.6. TIME MODE TIME Mode Time standby display1) Pressing the MODE key in the Temperature mode allows you toenter the Time mode and after 1 second it shows you the current After 1 second After 1 secondMenu keyMenu key
time.2) Detailed function by menu.(1) Unit selection menu- Pressing the menu key in the Time Standby allows you toenter Unit selection menu and you can select the timeunit in the 12/24 hour by using up/down key.(2) Alarm selection menu- Pressing the menu key in the Unit Selection menu allowsyou to enter the Alarm selection menu and you canselect the ALARM Off/ALARM ON by using up/down key.- If the Alarm is on, the radio makes a alarm beeping atthe set time.(3) Alarm time setting menu- Pressing the menu key in the Alarm selection menuallows you to enter the Alarm setting menu, you canselect hour/minute or AM/PM by using shift key andchange setting time by using up/down key.- 7. STOPWATCH MODE Stop watch Mode Stop watch standby display1) Pressing the Mode key in the Time mode allows you to enter theStop Watch mode and access to the Stopwatch standby displayafter 1 second.2) You can operate the stopwatch by using the menu key.8. SETUP MODE SETUP Mode Setup Standby display1) Pressing the Mode key in the Stopwatch mode allows you to enterSetup mode and access to the Setup standby display after 1second.2) Detailed function by menu.(1) Priority scanning channel selection menu- Pressing the Menu key in the SETUP mode allows you toenter in the priority scanning channel selection menu.You can select the Priority scanning channel by usingthe up/down key.(2) VOX Recovery time selection menu- Pressing the menu key in the Priority scanning channelselection menu allows you to enter in the VOX Recoverytime selection menu. You can select one out ofOff/1sec/2sec/3sec/5sec by using the up/down key.(3) CALL selection menu- Pressing the menu key in the VOX delay time selection After 1 second Menu keyMenu key
menu allows you to enter in the Call selection menu.You can select call option out of Off/1/2/3/4/5/6/7 byusing up/down key.(4) VIBCALL selection menu- Pressing the menu key in the Call selection menu allowsyou to enter in the VIBCALL selection menu. You canselect VIBCALL option out of Ring/Ring+VIB/VIB by usingup/down key.(5) Roger beep selection menu- Pressing the menu key in the VIBCALL selection menuallows you to enter in the Roger beep selection menu.You can select the Roger beep on/off by using theup/down key.(6) Key beep selection menu- Pressing the menu key in the Roger beep selection menuallows you to enter the Key beep selection menu and youcan select key beep on/off by using up/down key.(7) T-O-T (Time out timer) selection menu- Pressing the Menu key in the Key beep selection menuallows you to enter T-O-T selection menu. You canselect one out of Off/30/60/180 by using the up/downkey.(8) User name setting menu - Pressing the Menu key in the T-O-T selection menuallows you to enter the User name setting menu.You can set the user name by using Shift key andUp/down key.! Operating1. Transmit(1) Transmitting is started by Internal PTT/External PTT/VOX PTTkeying.(2) You can transmit a call signal by Double Internal/External PTTKeying. If you press the Internal/External PTT key duringCalling, stop the call transmitting and return to thereceiving stand by mode.(3) If the battery is low, you can make a transmission for 10seconds.(4) You can transmit signal in every mode by using transmitkeying.2. Receive(1) Two way channel receiving1) If the radio detects the correct channel and code, releasethe receiving.(2) FM radio receiving1) IF the FM radio is on, it receives FM RADIO CHANNEL.(3) Weather Alert receiving1) If the Weather Alert is on, it detects the whether Alert
signal of weather channel.(4) Weather receiving1) If the weather channel is on, it receives the weatherchannel.3. Normal Scan1) If the Normal Scan is on, it starts scanning all channels.2) If a transmission is detected, it receives a signal for 5seconds and then change to next channel.3) Scan wait time is 5 seconds after receiving.4) You can pause on any channel for 15 seconds while in thechannel Scan mode by pressing the PTT key during of a signalfor 5 seconds afterward.5) When you make a transmitting during Scanning, if you arereceiving or in scan wait time, you transmit a signal inthat channel. Otherwise you transmit a signal in the channelin which you start the scanning.6) Pressing the monitor key shortly during receiving or scanwait time allows you to move to next channel and pressingand holding the monitor key for more than 1.5 secondsdeletes the current receiving channel in the scan list.4. Priority scan1) Priority scan allows the scanning of two different channelsat the same time.2) If the radio receives a signal in the current channel, theradio detects the priority channel every 5 seconds and theradio receives a signal in the priority channel, detects thepriority channel continuously.3) When you try to transmit a signal during Scanning, if youare receiving or in the scan wait time, you transmit asignal in that channel. Otherwise you transmit a signal inthe channel in which you start the scanning.4) Pressing the Monitor key during scan wait time or receivingallows you to switch to the next channel.5. Monitoring1) Pressing the Monitor key allows you to monitor the currentchannel.2) Monitor key does not operate during transmitting.3) Pressing the Monitor key for more than 3 seconds enables tomonitor continuously. Pressing the Monitor key releases theauto monitoring.4) Changing the channel or receiving a signal release the AutoMonitoring.6. Power Save1) After Radio is on, it does not save the power for 5 seconds.2) After finishing transmitting or receiving, it does not savefor 5 seconds.3) When code option is off, Auto Power Save operating abides bythe rule of 100ms/400ms(off/on) for 20 seconds after powersave is started and abides by the rule of100ms/900ms(off/on) after 20 seconds when power save isstarted.4) When code option is on, Auto power save operation abides by
the rule of 300ms/400ms(off/on) for 20 seconds after powersave is started and abides by the rule of300ms/900ms(off/on)after 20 seconds.7. Low cell indication1) The radio checks the battery charge strength regularly.2) The cell icon will blink when the radio is in low batterypower after making a low cell beeping.3) You can not transmit for more than 10 seconds during lowcell.8. RSSI display1) RSSI Icon and strength appear on the LCD when the radioreceives a busy signal.9. Volume control1) Pressing the up/down key in the every mode increase ordecrease the volume.

Navigation menu