J Three Holding BT1010 Low Power Bluetooth Class II Module User Manual BT 1010user revised p3

J-Three International Holding Co., Ltd Low Power Bluetooth Class II Module BT 1010user revised p3

Revised Manual

Bluetooth Class 2 Module(BT-1010)USER GUIDEDEPARTMENT: WIRELESS BUCOMPANY: J-3 INTERNATIONAL HOLDINGDATE: 05-01-03VERSION: 1.0
J-3 Wireless BUTABLE OF CONTENTSI. General Specifications Page 1II. Mechanical Specifications Page 2III. Electrical Specifications Page 3
BLUETOOTH CLASS 2 MODULE Version 1.0 Page-1-J-3 Wireless BU FCC STATEMENTThis device has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy. If not installed andused in accordance with the instructions, it may cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try and correct the interference by on or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This device must not be co-located or operating in conjunction with any otherantenna or transmitter. Information to userThe users manual or instruction manual for an intentional or unintentional radiator shall cautionthe user that changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.
BLUETOOTH CLASS 2 MODULE Version 1.0 Page-2-J-3 Wireless BUI. FEATURES Bluetooth Plug-n-play class 2 module. Small Dimension (15mmx23mmx4mm) Fully compliant to Bluetooth V1.1 standard High sensitivity (typical -80 dBm)II. APPLICATION Personal digital assistants Laptop computers Bluetooth devices Bluetooth enabled consumer appliances.III. DescriptionBT-1010 Bluetooth class 2 module is a short-range radio transceiver operating in theunlicensed 2.4 GHz ISM band. BT-1010 fully complies with Bluetooth V 1.1 standard, and itis usually applied in design-in scenarios to provide Bluetooth capabilities. Currently, BT-1010has been applied in the design of Bluetooth mouse, Bluetooth keyboard, Bluetooth accesspoint, and personal digital assistant (PDA).
BLUETOOTH CLASS 2 MODULE Version 1.0 Page-3-J-3 Wireless BUI. GENERAL SPECIFICATIONSProduct Description Bluetooth Class 2 ModuleProduct Model No. BT-1010Standard Bluetooth V1.1Frequency Band 2.400GHz ~ 2.480GHz unlicensed ISM bandSpread Spectrum FHSS (Frequency Hopping Spread Spectrum)Modulation method GFSK (Gaussian Frequency Shift Keying)RF output power Class II, -6 dBm ~ 4 dBmWorking distance Max. 10 m in free spaceSensitivity < 0.1% BER at –80dBmPower consumption Tx Typical : 65 mARx Typical : 45 mA
BLUETOOTH CLASS 2 MODULE Version 1.0 Page-4-J-3 Wireless BUII. MECHANICAL SPECIFICATIONSFigure 1: BT-1010 PictureFigure 2: Pad Dimension and Pin Assignment
BLUETOOTH CLASS 2 MODULE Version 1.0 Page-5-J-3 Wireless BUIII. Electrical CharacteristicsAbsolute Extreme RatingsSupply Voltage UnitMax. 3.5 VTypical 3.3 VMin. 2.8 VStorage Temperature UnitMax. 85 oCMin -40 oCRecommended Operation ConditionsSupply Voltage UnitMax. 3.5 VTypical 3.3 VMin. 2.8 VMax. OperatingTemperature70 oCMin. OperatingTemperature0oC

Navigation menu